Doesn't like some of my MIDI?

Hiya! I'm using Logic 9 on my Black Macbook, running 10.5.8, with a Roland TD-4 set, and an M-Audio Fast Track Pro USB interface. My problem doesn't really make sense to me. I've recorded a drum track using the kit with the Superior Drummer 2.0 plug-in like I always do, but in this last session that I'm working on, Logic just stops playing MIDI after I record any of it. I'll have some MIDI done, it'll play, but as soon as I record a take, it doesn't play back any of the MIDI on that specific take until I restart Logic, and then it shows the take as being Muted (kind of transparent and comes back when I press M).
Not only that, but now it ignores specific parts of my take even after I restart Logic. http://i581.photobucket.com/albums/ss259/Olnoname/Picture1.png (just realized I'd moved the take up to the Sax to see if the problem persisted outside of that track, and, yes, it does.)
That picture shows this latest take that I have for my MIDI drum track. The 9 notes at the end (measure 26.4 to 27) aren't played when I play the rest of the song, but only those specific notes. I can click on them and get the appropriate sounds, but only when I click on them individually. I'm totally at a loss now. Any help would be deeply appreciated or lemme know if I need to elaborate any further.

Satch7320 wrote:
Hiya! I'm using Logic 9 on my Black Macbook, running 10.5.8, with a Roland TD-4 set, and an M-Audio Fast Track Pro USB interface. My problem doesn't really make sense to me. I've recorded a drum track using the kit with the Superior Drummer 2.0 plug-in like I always do, but in this last session that I'm working on, Logic just stops playing MIDI after I record any of it. I'll have some MIDI done, it'll play, but as soon as I record a take, it doesn't play back any of the MIDI on that specific take until I restart Logic, and then it shows the take as being Muted (kind of transparent and comes back when I press M).
Ok, there's been others who've experienced this exact same problem and I don't know that a solution was ever found. I kind of suspect a corrupt project.
Is this by any change a project or a template that was started in Logic 8?
Do you have the same problems when creating a brand new project?
pancenter-

Similar Messages

MP3-Library doesn't like some of MediaSource's ID3 t

Just a tip for MP3-Library users:
On rare occasions, MediaSource 3.30.2 will produce an ID3 tag that MP3-Library doesn't like. (This is pretty rare -- out of 45 tracks I updated the tags on, 6 did this.) This results in the file being displayed as corrupted. If you select "Analyze/Fix MP3," it finds a frame or two with random specifications at the very start of the file, followed by a single bad frame, and then all good frames.
If you check all availiable fix options (delete selected frames [check the junk and bad ones], delete garbage before st frame, delete garbage after last frame), it lops about 30 bytes off the end of the tag/header and takes a few good frames off the start of the file.
According to MP3Utility and EncSpot, there's nothing wrong with the files, and they play just fine in MediaSource, Winamp, and on the Zen. The header data that was destroyed doesn't affect the ID3 data. It only seems to have removed the Xing header. (No, I don't use Xing. LAME 3.97 alpha puts Xing-compatible headers on its VBR files.)
The following are the summary data that MP3Utility shows. This is from the original file, fresh out of LAME:
File size: 3,63,232 bytes
Offset to first frame header: 2,630 bytes
MPEG version .0; Layer III
Bitrate: VBR (Xing); Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 47 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 8,945
Estimated time: 3:54 (234 secs.)
This is after importing the file into the PC Music Library and clicking "Update Tag." I didn't modify anything, just told it to re-write the ID3 tag:
File size: 3,63,232 bytes
Offset to first frame header: 2,630 bytes
MPEG version .0; Layer III
Bitrate: VBR (Xing); Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 47 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 8,945
Estimated time: 3:54 (234 secs.)
And this is after MP3-Library "fixed" it:
File size: 3,629,325 bytes
Offset to first frame header: 2,600 bytes
MPEG version .0; Layer III
Bitrate: 224 kbps; Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 73 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 4,96
Estimated time: 2:0 (30 secs.)
No, MP3-Library DIDN'T chop 04 seconds off the file. The estimated frame count and length are WRONG because the Xing header was destroyed by MP3-Library. This header would normally tell MP3Utility how long the file really is, otherwise it takes the bitrate of the first frame and extrapolates that over the file length. (Without this header, many programs' progress sliders won't be as accurate.)
So, if MP3-Library tells you a file is corrupted after going through MediaSource and the file wasn't corrupted before, DON'T fix it. You'll only make things worse. I've never seen MediaSource or my Zen actually damage a file.
(At first, I told it to fix 'em. Now I'm going through and restoring the backups it made.)

i have used mp3-libary many times before because it said a large amount of my collection was corrupted. but it seams to be better.as i havent used media source to import them so i think they may have actually be corrupt. but interesting findings.

DVDStyler doesn't like some updates

Hi!
After today's ffmpeg and x264 updates DVDStyler won't start anymore. When I try to start DVDStyler, I only got following:
$ dvdstyler
dvdstyler: error while loading shared libraries: libavformat.so.51: cannot open shared object file: No such file or directory
I installed previous version of ffmpeg, after this I got:
$ dvdstyler
dvdstyler: error while loading shared libraries: libx264.so.55: cannot open shared object file: No such file or directory
I installed also previous version of x246 and DVDStyler work's fine!
Is this bug or something?

Rebuilding wxsvg (for some reason the configure script for dvdstyler just wouldn't recognize it's installed until I rebuilt the package) and then rebuilding dvdstyler makes it work again. So if you can't wait for the pacakge to be updated you can rebuild it yourself (I'd suggest reading up on ABS on the wiki first though if you're not familiar with it).

Hi everyone I have a macbook pro mid 2010 17'' 2.66 i7 looking to put a new hard drive in it something like a 250 gb , orig drive 500 gb 5400 toshiba but i don;t really need that much space so i would like some input, type,speed,brand,compatibly,noise

I have a macbook pro mid 2010 17'' 2.66 i7 looking to put a new hard drive in it something like a 250 gb , orig drive 500 gb 5400 toshiba but i don;t really need that much space so i would like some input, type,speed,brand,compatibly,noise Thank You!!

There's no reason to install a smaller hard drive. In some cases, it may decrease performance.
Your MacBook Pro comes with a 5400 rpm hard drive, so what you can do is to install a smaller, 7200 rpm hard drive, so you will get a better performance. Any 2'5" SATA hard drive will work, but you can have a look at OWC for hard drives > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
HGST and Seagate hard drives have a good reputation, so you can purchase one of them

I would like some help in determining the proper structure/implementation

I would like some help in determining the proper structure/implementation for the following scenario:
I have ~10 steel rods that have been equipped with a strain gauge. The most I would have is ~30 steel rods.
Each setup has had a 10 point calibration done.
These steel rod/strain gauge setups are assigned a calibration number.
The data would be grouped for each steel rod and identified by the calibration number.
I would like to use that calibration data to determine the Young’s Modulus for each steel rod and store that within the specific rod’s information.
I want the user to be able to add new steel rods dynamically and the Young’s Modulus calculated and stored with it.
There are two different types of rods.
The cross-sectional area of the rod needs to be stored and that value is constant based on the rod type (so there are two different area values).
After a rod’s calibration data is entered the first time, the data should be static so it doesn’t need to be re-entered.
The user would enter the cal#, the 10 point calibration data, and the rod type.
The user will only see the steel rod cal# on the FP.
I am using a queue-based producer/consumer with event structure for the front panel interface. So I’m thinking whenever a rod cal# was added I would call a subvi where the calibration data can be entered and then the Young’s Modulus could be calculated and stored. An option to edit/review existing cal data should be available.
LabVIEW 2010, Win 7.
My initial idea was:
Rod Arr – array of clusters:
Rod Info - cluster:
Calibration number – string
Rod Scale cluster:
mV/V – double array
force – double array
Young’s Modulus – double
Rod type – enum
Cross-sectional area – double
I have not implemented this because I’m not sure how to implement that AND keep the data after it’s been entered. And all of the bundling/unbundling anytime I want to access/edit any rod information can be BD consuming. I thought a lookup table might work. When I looked on the forums for a lookup table I was pointed in the direction of arrays/clusters.
So I have two questions:
What would be the best structure for the steel rod data?
What would be the best data type for the calibration# that the user can edit (enum, ring, ?)?

I would make a couple of small change to your proposed data layout (highlighted in blue):
Rod Arr – array of clusters:
Rod Info - cluster:
Calibration number – string
Array of Rod Scale cluster:
mV/V – double
force – double
Young’s Modulus – double
Rod type – enum
Cross-sectional area – double
For the calibration data, I would have an array of clusters rather than a cluster of arrays. IMHO, this makes it easier to index through the calibration points, and makes it less likely you will ever have a situation where you don't have the same number of mV/V and force points. I'd also move the Young's modulus, type, and area info into the Rod Info cluster.
I prefer to store this type of configuration in the system registry, but that is more complicated and far from universal in the LabVIEW world. A simpler way would be to simply pass the entire array to the "write to binary file" function. If you do this, however, you might want to add a version number, otherwise it will be very difficult to maintain backwards compatibility if you ever need to change the data structure.
As far as the control type, it depends on what the user is entering. If the user is mostly entering calibration numbers already in the system, I would use a (system) combo box. This allows the user to select an existing calibration number from the menu, but also to enter a new calibration number if they need to. If the user will almost always enter new calibration numbers, then I would use a standard string control. Either way, you'll probably want to validate the format of the number the user enters.
Mark Moss
Electrical Validation Engineer
GHSP

What is the best way to properly activate the Lightroom Student Edition? Is the Student Edition a permanent program or does it deactivate after 2-4 years like some other programs that are student versions?

I just purchased the student edition of Lightroom! I am very excited to use it and start creating beautifully edited photos but I'm a little unsure about a few things. It says I have to prove my eligibility to use the student edition which won't be an issue but what is the quickest and easiest way to submit this proof? Also I am concerned that the student edition will be temporary and I will have bought this program only to have it expire at the end of 4 years like some other programs that are student versions. Is the student edition of Lightroom a permanent program that I will have for life or will it deactivate after I graduate?

When I purchased my academic version of Lightroom, it was a package set. Inside was a yellow card with the instructions on how to verify that I qualified for the academic discount. I submitted my academic e-mail address and other info as requested on that yellow card. Within 5 min. I received my serial number. Very straightforward. I had no problems whatsoever.
There is only one version of the Lightroom program itself. The only difference is in the licensing and pricing. If you qualify for the academic discount, by all means use it. You are purchasing the same Lightroom program that anyone else does. It doesn't expire, there are no missing features, and it can be upgraded when new major versions are released. Those upgrades will cost the same as they cost for any other person, regardless of how they purchased Lightroom.
You can confidently move ahead with obtaining your serial number. The only thing you are doing differently is paying a lower initial purchase price because of your academic status.

Home buttom doesn't work some times

home button doesn't work some times

I've been having the same problem... I went to the apple store. They weren't much help. The guy told me I need to make a genuis bar appointment and they'd likely have to replace the device (phone) at a certain cost. Determined by the tech at the time.
Doesnt sound like much fun or very cheap...
I live in Minneapolis and within the same mall as the Apple store theres a game store that said they can replace the home button for 20 dollars!! That its a loose wire and/or the spring inside doesnt work. But the warrantee their work and you cant beat the price vs apple store. They had to order some home buttons as they were out at the time so I'm going in on Sat.
Lets home theres more alternatives to these types of problems as Apple as seemed to be on their high horse about things like that a little too much lately.
I dont think you live in Minneapolis but I'd look around... It sounds like this is a common problem so you might have some luck finding someone to do it for less than 100-200 dollars that Apple wants to charge.

I would like to know about MIDI,

I would like to know about MIDI,
Are there information or code?

honestly, i didnt know anything at all about programming MIDI and i learned
it in a day (well enough to make a software synth for my usb keystation in one night).
the java docs and some simple googling pretty much covered all the bases.

HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.

HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.

My 2006 MacBook Pro and my 2011 MacBook Air both do it. It happens because the earth ground stops at the power brick and is not carried through to the case of the machine. It is not dangerous or the machine would not have been UL approved.
Since I operate on battery 99.9999% of the time it doesn't bother me at all.

External control over vst's; or some kind of midi learn

I'm moving this post from Audition Feature Requests to here, 'couse nobody ansewer anything..
External control over vst's; a midi learn-like
I'm not really shure if AA3 have it or not, but I can't find the way to get control of parameters on third part plugins with my BCR2000.. (rotary control)
I can use my midi keyboard to play Vsti
I can use my Mackie for the main mixer...
But what about the capability of automatise, for example.. a feedback level's delay whit some rotary external midi hardware?
Maybe it is possible and I don't know, but I can't find the way to do it searching in AA3... I neither can't find info on internet forums..
I'll be very grateful if anyone say something about it
Thanks!!
Nico

Hi Nico,
Currently, Audition offers no direct support for controlling VST parameters via MIDI, although there are VST effects that handle MIDI control themselves. It is a feature I'd like to see, and it is currently in our feature database in consideration for the next release of Audition.
Durin

Safari doesn't play some quicktime movie/animation

Hi there ..
I have a problem with Safari:
It doesn't play some on screen little quicktime windows used for advertising or .. showing little animation.
Like www.luxology.com (they have a little quicktime playing)
But if I put the mouse over such little windows and rotate the mouse wheel they play.
But they don't play automatically, only by rotating the mouse.
I don't know if it happened after I used Webkit or after Quicktime 7.1
Any Help?

That site uses Flash (.swf) and not all Flash files can be viewed using QuickTime.
I don't know if there is a Universal version of the Flash Player available but it is what you should be using for features like Flash in a browser.

Create desktop quietly fails - doesn't like my ".portal" file

Guys,
Since SP2, we're having trouble creating a desktop to "import" our ".portal" file.
After going through the sequence of clicks, it just comes back quietly but the
desktop is not there. It only does this if I "Choose a Template". It seems that
it doesn't like something in my template file but gives no indication of what.
If I revert back to an old template file, it works. However, I also re-created
a new template file from scratch and it won't read that one either.
Any clues?
Is there some debug/logging options for Admin Portal?
Thanks,
Phil

Jeff,
Thanks for the reply.
The .portal file was created in workshop and workshop reads it fine.
I discovered that after deleting all my books and pages from the Admin Portal
library, it imported my .portal file successfully. I'm thinking it finds some
"Definition Label" conflict between those in the .portal file and what's in the
library.
Phil
"Jeff Mueller" <[email protected]> wrote:
>
Hi Phil - was there no error message on the console? If not, please
check the
portalServer.log file and/or wl-domain.log file for that server session.
There
should be an error message listed there. It sounds like it's most likely
bad
xml in the .portal file. Did you create the new .portal file in Workshop?
Does
it open correctly there?
Jeff
"Phil Grimm" <[email protected]> wrote:
Guys,
Since SP2, we're having trouble creating a desktop to "import" our ".portal"
file.
After going through the sequence of clicks, it just comes back quietly
but the
desktop is not there. It only does this if I "Choose a Template". It
seems that
it doesn't like something in my template file but gives no indication
of what.
If I revert back to an old template file, it works. However, I alsore-created
a new template file from scratch and it won't read that one either.
Any clues?
Is there some debug/logging options for Admin Portal?
Thanks,
Phil

I had an iPAD 4. Since I updated to IOS 7 it began to freeze up. I now have the iPad Air and the same thing happens. I'd like some advice because apple's technical service has no idea.

I had an iPAD 4. Since I updated to IOS 7 it began to freeze up. I now have the iPad Air and the same thing happens. I'd like some advice because apple's technical service has no idea.
Technical service in Spain is useless. They told me to re-install everything again as when it's brand new, application by application to see which one is failing. I have 150 applications.
If they continue in this direction they will end up like Palm
You can tell Steve Jobs is no longer in charge.
I'm thinking of moving to Samsung.

If this problem continued across an iPad with Retina to an iPad Air it is almost definite it is one of your apps causing the problem. Run it for a day with no apps loaded on it, if it doesn't freeze then one of your apps that has not been updated is causing the issue. And the Technical Service in Spain gave you correct information.
It was no different when Mr. Jobs was still in charge (I was around for iOS 3.0) and it is no different on a Surface or a Note.

Encore CS4 Flash output - server doesn't like file names

Apparently my ftp server for my web site does not like files with spaces in the names, but Encore seems to use spaces in some of the file names for the png files in the menus. Is there any way around this? Can I force it to replace spaces with underscores? Can I go in and manually change the links and the file names (there aren't too many). this is very annoying - how could this happen?
Thanks,
Scott

If your server doesn't like spaces in file names, it's likely due to HTML address rules. However, these files won't be linked via HTML, but through the AuthoredContent.xml file directly into the SWF playing in the Flash player, which doesn't have the same limitations as HTML.
If your server is kicking a fuss up about this, replace the single space character in the PNG filename with an underscore character (do this at file system level), then edit the AuthoredContent.xml file and replace the space character in the PNG filename with an underscore character. Save everything, and then upload the files in the same hierarchy that Encore exports.
That should do it.

Safari doesn't open some websites correclty

Safari doesn't open some websites correclty. For example Interpals:
My Internet speed is fine. It's playing videos from Youtube without any problem and displays Youtube correctly. I also resetted Safari, but it didn't help. What am I supposed to do?
I am on 10.7.5 , Safari 6.0.3

Avast is the problem. This is a list of links for threads regarding Avast and the issues it can cause on your Mac > Community Search: Apple Support Communities
Follow the instructions for uninstalling Avast > How to remove Avast Antivirus from a Mac
If you really want to have anti virus software installed on your Mac, try Free Antivirus for Mac Tool Download | Sophos
Do not install Sophos before completely removing Avast.

Doesn't like some of my MIDI?

Similar Messages

Maybe you are looking for