Doesn't recognize my movies with new firmware

With the new firmware, I can't go to My Movies, where I have a few movies bought from Apple. I get a blank screen and I have to reboot Atv. All the rest works fine (music, tvshows, rent, etc). I guess there is a problem with that firmware and hope it will be solved soon.

is your appletv modified in any way ?

Similar Messages

My New HP P2015d Printer ($400) doesn't seem to work with New Pavilion Slimeline 64 bit PC !

My New HP P2015d Printer ($400) doesn't seem to work with New Pavilion Slimeline 64 bit PC ! I need some suggestions. Any help would be appreciated.
The printer worked for a while and then out of the blue stopped working. We have a virus protection system, so I doubt it is a virus issue.
*** We already tried to download the latest drivers and that doesn't seem to work ***

Hi
Are you trying to find your printer's email address? If so, check out details below
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/how-do-I-find-my-printer-s-email-address/td-p/...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Nokia N80 with NEW Firmware wont sync with PC Suit...

Hello everyone
i have my Nokia N80 on 02 network
i upgraded the old firmware to the new 4.0623 firmware without any problems at all...
now when i connect to latest version of PC Suite via bluetooth, which used to work fine with the old firmware..
PC Suite says its connected via bluetooth, but when you go to contacts, and then try tp UPDATE them, it just searches for over 15 minutes, and nothing happens..
have done everything i can, and nothing works!
why doesnt it work with new firmware?
even when i try and SYNC the phone with PC suite, it is having none of it! whats going on?

have you tried to syncronise with PC sync to see if the sync overall is in order in PC Suite.
Sometime the PC Sync might work, but the contacts folder sync in Nokia Phone Browser has zillion reasons to be stuck since it is Windwows Explorer inbedded.
By tryibg to use PC Sync you can narrow down the reasons what can go wrong

N95 photo shooting problem with new firmware V11

I have got a problem with photo shooting after upgrading my N95 (Product Code: 0534832) to the new firmware (v11.0.026) via Nokia Software Updater.
Before upgrading the firmware, I can turn off the loud and ugly snapping sound when shooting a photo; all I need to do is to change to Silent Profile (that has Warning tones OFF). But it seems that I can no longer turn that ugly sound off with the new firmware!
Is that a bug? Is there another way I can turn the sound off?

Actually I have 2 N95 phones, one is my GFs, both of them are bought and used in Hong Kong.
The way I test the differences between versions is directly comparing each feature with the two phones, where the one with new firmware has product code #0534832, and the one with old firmware has product code #0548445. Both of them has www.nokia.com.hk printed on the box and manuals, so I assume local law is not an issue.
By the way, I have just discovered that the one with product code #0548445 cannot update via Nokia Software Updater.

How do you empty mail trash with new firmware

In 1.1.4 you could go to your email account click advanced and set the IPT to empty mail trash once a day. I upgraded to 2.0.1 and there is no longer a setting on that screen to set when trash is emptied. I get a lot of spam so I need to empty daily. Anyone know how to do this with the new firmware?
Thanks.

Also, you can move email to the trash folder directly from your inbox without even reading it. To do so from within your "inbox", click on "edit". You will notice there is a blue dot to the left of all new mail (shows you haven't looked at it.) When you click on edit, all the blue dots disappear.
Tap the same area where the blue dot was and a red circle will come up with a check in the center. Tap the Delete All button at the bottom and every red circled email will go directly to "trash".
In Trash, just do as the previous post says. Hit the edit button and then Delete All.
That's it and to me this is worth much more than the $9.95 for 2.0 that there is so much belly aching go on about on this forum.

LaCie Desktop Manager doesn't recognize LaCie RAID with my 2011 MacBook Pro

Hello,
I have a new MacBook Pro 17" but I am not able to use the LaCie Desktop Manager with the LaCie 4big Quadra Enterprise Class RAID. The drive is recognized by the finder via eSATA, FireWire, USB, but is not recognized by the LaCie Desktop Manager. This prevents me from encrypting the drive. The LaCie Desktop Manager could recognize the raid with my early 2008 MacBook Pro.
I'd like to know if anyone else is having the same problem with their 2011 MacBook Pro.
I have been communicating with LaCie support but he tells me that he can't check the same or similar configuration as mine.
Thanks,
Dennis

Looks like the cable is the same if you still have the 2010.
http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Unibody-Mid-2009-Mid-201 0-Early-2011-SATA-SuperDrive-Cable/IF161-040

WRT54G v6 problems with new firmware

I performed the mandatory firmware update and soon began having problems such as DNS errors when trying to access web pages and no IP address assigned to secured wireless connections using DHCP. I reinstalled the earlier version and all of my problems vanished.
I tried reinstalling the new firmware several times with the same results each time. I ran with a backup D-Link DI-524 until I came up with the idea of rolling back the firmware.
Has anybody else experienced this??

Hello belbeebala
You should be able to find older versions at the Linksys ftp site below.
Just be sure to get the correct one.
For example, if you have the WRT54G v6, you'll want to be sure you find one that looks something like this:
wrt54gv5_v6_fw_1.00.9_US_code.zip
That version can be found down near the bottom of the link, and is just an example of the 1.00.9 Firmware made specifically for the WRT54G v5 and v6....look very carefully for the one you want/need.
Good luck.
ftp://ftp.linksys.com/pub/network

Missing tracks with new firmware 2.11

I'm guessing that I can't be the only person on here who has had trouble managing the music on their Zen Touch after upgrading to 2..0, but I can't find any posts that mentions it. IMO the new firmware is terrible in the way it changes the way Mediasource shows the music on your player and even if you use Windows Media Player or the Windows Explorer type utitily the system of folders is rubbish as well.
Has anyone had issues with whole albums missing or ID3 tracks not showing correct information since moving to the latest firmware? When i connect my player to my PC I have a few albums which show on my PC as being on the player but when I'm using the player regularly when I'm out and about the albums are missing.
One other request. Can you guys tell me how you are transferring music to the player now? I would be interested to know if you do it through Mediasource or via copy and paste using explorer? If you do the latter where exactly do you put the music? Do you put it in the music folder under "media", and also do you put the artist folder in there or just dump the albums in there?

I could not believe how much of a **bleep** up the team at Creative had made upon installing the firmware update. Im not at all happy with the fact that it is not reversable either... It really blows ey mate?

Time Capsule connecting to windows with new firmware

I have opgraded my TC´s firmware to 7.4.1, and now my PC cannot log on to the harddrive in it. I get this error message: The computer cannot connect to the TC, check that netbios is on.
This is translatet fra danish, but the meening is the same.
What is wrong???

The new firmware does not work with Windows XP. I had to revert to the last firmware, and the last version of Airport, but the good news is, you can't do that thru Windows either. You HAVE to boot thru MacOS because their instructions for Windows and the Airport do not work. You are unable to find previous versions of the firmware unless you use the Airport util thru native MacOS.

Calendar Sync from iPhone 3G & Mobile.me to Outlook works with new firmware

YEAH - SOLUTION TO ONE PROBLEM FOUND !
Appointments I created on the Iphone do not get synced to Outlook via Mobile.me
*NO LONGER SO !*
I upgraded my firmware on my iPhone 3G to version 2.0 (5A347) by clicking on the Restore button in tha iTunes interface. It then downloads a new firmware to the iPhone and with this - I can sync all tha way !

I can't remember where I found this but it worked for me. To get appointments composed on the iPhone to sync with Outlook, the appointments must be recurring. So what I do now until Apple gets this problem fixed is make all of my appointments recurring with start and end date on the same day so they only show up once. Try it, it works for me.
Joe
Windows Parts-Pieces Windows XP Pro 3GB, 2.8GHZ
BJ Hammond
Posts: 1
From: Indiana
Registered: Jul 21, 2008
New! Re: Calendar Items Created on the iPhone do not sync to Outlook 2007
Posted: Jul 21, 2008 11:11 AM in response to: thejoeyz Reply Email
This worked for me. Thanks so much! It's still a pain in the "you know what!" Make sure you do the following.....
1. Repeat, Every Day, Save
2. End Repeat, Enter Same Date as above, Save

Safari not working with new firmware

Safari doesn't seem to be working now that I installed new firmware on Macbook Pro

Where did you get the firmware, and what specifically was it for? You need to know this before downloading or installing anything.
Mulder

Nokia E71 problem with New Firmware 410.21.010

I have updated my Nokia E71 (RM-346) to new firmware 410.21.010. It creating a problem with battery that drain out quickly. Before update, for normal use, I need to charge once a week. But after upgrade new firmware 410.21.010. It finishes in 24 hour for normal use. I have read article that I can not downgrade, just only to wait for next firmware. Have some one any solution?
Solved!
Go to Solution.

I had a Nokia E71 running very happily on version 3 firmware. I updated the firnware to 410.21.010.
It worked fine until I switched the phone off and tried to re-start the phone. It stopped working.
It is my work phone. The messaage on the phone said take it back to my retailer. He tried to get it fixed but because Nokia say it is out of warranty I am out of a phone that is set up to use the Oki system.
It worked perfectly well until the software update.
It is now at my retailer waiting for me to collect.
This is very disappointing.
Especially as I am now considering not using a Nokia telephone ever again. Moreover, I am sure that Fair Trading would consider this matter very strange and might like ot investigate it further.
I want my E71 fixed for free by Nokia as it was working without any malfunctions until the firmware update - which was done after receiving notification from Nokia. I have not been able to use the Oki system for some weeks now and would like to contiue using Nokia. Otherwise I guess Nokia lose another customer to iPhone or HTC or Samsung. I await anyone's advice on this matter.

SRW224G4 - cant manage with new firmware thru Xmodem (dead after upgrade)

Hi All,
Before i wrote this msg, i saw few threads aboud "problem with upgrade firmware". Today i've upgraded my Linksys SRW224G4 to newest 1.2.2b and... after rebot, switch was still rebooting. I found on cisco site how to solve the problem regarding this: http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
So, i've made RS232 (because i don't have orginal one ; pinout 1-1 2-2 3-3 4-4 5-5) and connected to console
The problem is with hiting ESC on POST screen. My hyperterminal freezes So, i can't upload my files
Files: SRW224G4_fesm-12216.ros ; ls_106-12216.ros ; SRW224G4-1.0.0.61
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Downloading code using XMODEM.
Download failed
Perform WARM BOOT ...
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Downloading code using XMODEM.
When i try to send SRW224G4_fesm-12216.ros now, HT freezes too
Guys, what shall i do now ?
I think the RS232 cable is ok, pinout is linke normal DB9 one-to-one without crossing 2 with 3 pin.
Best regards, w8ing 4 any help.

So...
I've solved it
Problem was with settings in HT and sending ESC chacter
thank U ;D

Combo drive doesn't recognize DVD movies

a665s5186 (1 year old) dvd/cd combo drive does not recognize dvd movies (does not show up in my computer).
Cd's play, record fine! Will recognize previously burnt sony dvd's, will not recognize previously burnt memorex dvd's. Will recognize blank sony and memorex dvd's and burn files to them, after ejecting will not recognize memorex dvd's, will recognize sony dvd's? MY SYSTEM BACK UP DISCS I BURNT TO MEMOREX DISCS CANNOT RE- INSTALL OPERATING SYSTEM. Please help my combo drive recognize and play dvd movies.
Solved!
Go to Solution.

Peter,
I apologize for the hiatus. I tried several restore points, and reinstalled to out of the box state from the hard drive partition. Neither corrected the problem.
Out of curiosity, I installed Ubuntu operating system. The problem is duplicated, combo drive recognizes CDs does not recognize commercial DVD's. Does not recognize Microsoft office home & student 2010 installation disc,etc.
What else can I do? With the problem being duplicated with another operating system is it safe to say this is a hardware problem (the combo drive is defective?)
Thank You,
TPeterson1st

What happened with new firmware

Last time I visit download page there was a new firmware for my MuVo v200 : MuVoV200_PCFW_LF__0_04.exe (November 2005)
And now only MuVoV200_PCFW_LF__05_02.exe (September 2005) is available...
What HAPPENED?!!!

Creative removed it - they've done the same for a few of the latest firmware versions. No-one has mentioned why but you can bet that it wasn't because it was the best firmware ever and cured all known problems.
PB

Doesn't recognize my movies with new firmware

Similar Messages

Maybe you are looking for