Doesn't recognize SD card files

I've been using my 32GB Sandisk Class 10 SD card just for pictures and video. Today it randomly said SD card removed even though it was still in the phone. I had to eject it and put it back in a few times before it would recognize it and then all my pictures and video were gone from the gallery. I can still see the files in the file viewer and when I put it in my computer so they are there but they have no file association.
This is the second time I've had this issue, was using a SanDisk class 4 32gb card for a few months and it just completely stopped recognizing the card. It works fine in my old HTC Droid incredible but the S3 can't seem to figure it out. Not sure if I got a faulty SD card reader or what. Anybody else had SD card issues? I formatted both cards with the S3 when I first started using them.

Hi there Gs3elite!
Having the latest and greatest removable memory is absolutely important! I'm so glad that your photos and videos are still safe and sound. Phew!
I did a lot of research and I found that most mobile devices support Class 4, but not all support Class 10. I went here: http://pct1.sandisk.com/ProductList.aspx?DeviceID=18149 for some suggestions and I did actually see a Class 10 SD Card suggested!
You also mentioned that your Class 4 also had issues. Thank you so much for formatting both of them. That's an extremely important step!
Have you tried putting your phone in safe mode or master resetting it yet? Just in case it's a glitch!
Safe Mode: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=59242
Hard Reset: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=59267
Keep me posted!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport

Similar Messages

Blackberry Desktop Software doesn't recognize my .rem files on my SD media card. Cannot sync them to my Mac.

Hi,
I'm experiencing this problem where Blackberry Desktop Software for Mac 2.3.0 (build 12) doesn't recognize my .rem files (video and photo) on my SD media card (the Desktop Software app does show that file space on the media card is being used). Therefore, these files cannot be synced, decrypted, and viewed on my computer. I can see them on phone. I do have mass storage mode turned on and I can see the .rem files in the video and photo folders when my phone is connected to my computer. I can copy them to my Mac but since they aren't decrypted, I cannot view them.
I'm going to buy a new phone and I need to get these files off my current phone. I have a Tour 9630 with BB OS 5.0 bundle 1600.
I've tried backing up, reformatting the media card, wiping, and restoring but nothing has worked.
Is there any kind of utility that will let me decrypt the files on my computer? Should I try Blackberry Desktop Software for Windows?
I'm hoping someone can provide some suggestions? Thanks in advance.

Hey jack_clarke,
Welcome to the BlackBerry Support Community Forums.
Make sure mass storage mode is enabled on the BlackBerry: www.blackberry.com/btsc/KB13564
If this is disabled you won't be able to access your media card from the computer.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files. I have downloaded plugin for the camera, but it still doesn't work. Can you help?

I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files. Can someone help? I have downloaded 8.3 from Adobe, but still doesn't work?

Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.

Help! Bridge CS4 doesn't recognize 7D RAW files!

I just got a new computer, it has Vista on it. I installed my Adobe Photoshop and Bridge (CS4) on the desktop, and it won't read the images from my 7D. I downloaded the ACR and DNG converter 5.6, installed it, restarted my computer, and Bridge still doesn't recognize the RAW files. What else can I do? I need to access them ASAP! Thanks

Look for and download the Adobe DNG Converter version 8.6. No need to be running such an old obsolete version as you reference.
The Adobe DNG Converter is a stand-alone application that is in no way tied to your version of Photoshop. You not only download it and install it, but you also have to launch it separately and run it on each folder containing raw files from your Canon camera. Note that it will not recognize individual files, only the folder that contains them.
However, you shouldn't need the DNG Converter it if you update your ACR Plug-in to the latest version, ACR 5.7.
The Adobe auto updater was and remains utterly unreliable—I'd even say useless—in CS4. You must locate the ACR update at the Adobe site yourself and apply it manually.
This is the URL for the Mac update, I don't do windows, so you'll have to search for the Win version yourself:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 5.7 update

I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files. Additionally, repeated attempts to perform available updates have failed. The laptop has Windows 8.1 64Bit.

I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files. Additionally, repeated attempts to perform available updates have failed. The laptop has Windows 8.1 64Bit.

I don't know who you talked to, but some of the support techs tend to look at CS5 as "no longer sold or supported" and usually don't want to mess with it.
We are mostly user-volunteers and have time to help you out. Some of us get perks from Adobe, but we are not employees.
I actually gave you the links to the two very important CS5 updates, but you want to peruse this general list Adobe - Photoshop : For Windows
and get the Bridge CS5 updates as well. Adobe - Bridge : For Windows

New Mac Mini doesn't recognize airport card

I have a new mac mini, leopard, 1.8G c2duo, and have finally resolved some display issues. Now it doesn't recognize my airport card. Ideas?

If the airport card doesn't appear in the System Profiler (select 'About this Mac' in the Apple menu, then click the 'more info' button, then click 'Airport Card' down the left hand side) then the mini likely has a hardware problem and would be in need of repair/replacement. On the other hand, if the Airport Card shows up there, the system clearly can see the card, but it then means there is likely a problem with MacOS or a setting - in which case if you could describe the symptom (ie, where it is you are not seeing the card) then it may be possible to resolve.

Elements 9 Organizer - doesn't recognize .mrw format files

Using Elements 9 Organizer - it doesn't recognize .mrw file formats when imported to organizer, yet the documentation seems to clearly indicate that it should. Is there some sort of setting that is preventing it from doing what it professes to do?

When trying to import the contents of the folder, it does nothing and tell you that the folder didn't contain any recognized file types OR the files were already imported. Okay, so searching around I found it was the latter and not the former. (it seems the app could tell you). BUT, it doesn't tell you where those files are. Very funny - but not.

X220 doesn't recognize Wifi-card

Hi everybody, I ran into some issues with my X220 some weeks back and have been trying to fix them to no avail. As far as I can remember I took some time a few weeks back to install the 1.40 firmware-update and also updated the battery-firmware in the same routine. I'm not sure If it was immediately afterwards (since I'm using a dock with LAN), but the wifi-card (Intel 6205) wasn't recognized by the OS anymore. No entry in the device manager! Here's what I've seen/tried so far:1) What I was firstly able ot see was that the device would sometimes show up after returning from sleep when not in the dock.2) Since I have an Ericson WWAN-card i switched mPCIe places. WWAN-card works in both slots. No recognition of the Wifi-card in both. >> So it doesn't seem to be related to mPCIe or the board.3) My guess was a faulty card, so I tried a newly-bought Intel 7260 Wifi-card in the slot.3.1) The Wifi-card must have been recognized by the BIOS, since the whitelist-fault was presented and I had to remove it to even be able to boot again.3.2) As the warranty wasn't my concern anymore anyways I flashed a whitelist-disabled version of the 1.40 firmware. As promised, I was able to boot with the 7260 card.3.3) Yet still, the card is not presented in the device manager.4) Since my Windows 7-installation had quite some time on its shoulders I reckoned that maybe another OS would be able to properly recognize the card. I just freshly installed Windows 10 and again - nothing is able to bring back the Wifi-card.5) I used a linux live distribution to check whether that one recognizes any of the the cards. It also wasn't able to see any of the two. Does anyone have any experience with this kind of issue? With best regards and a hopeful thanks in advance, Christian

Update:
I used a debian live installation running from a pendrive to look for detected hardware. No wifi was found - again for both cards.
I'm really lost for ideas at this point. What really irritates me is that the BIOS/UEFI recognizes the 7260 card with correct VID and PID. Yet still the cards are somehow (I guess) not made available to the operating system.
On another note: I've just noticed that I posted in the wrong forum section. It's about an X220, so the "ThinkPad X Series Laptops" forum would be the correct one. Could a moderator maybe move this topic?

Cs6 doesn't recognize NVidia Card for graphics processing?

On starting up Cs6 for the first time, the program said that it doesn't recognize the NVidia GeForce 7300 GT. Is this right? Is this going to be true for the release?

That's a bummer. I had the same problem but can't remember the exact steps I took to fix it. At first it would not recognize my graphics cards because they were different (NVIDEA, RADEON), and would ONLY recognize the NVIDEA 7300. Then I updated all the drivers and swapped the order of my cards around, and changed the slot settings with the Expansion Slot utility (if you are on an older MacPro). After some tweaking they all loaded and are working well but don't have all the extra features that a new graphics card would have.

HT5172 My new Macbook Pro doesn't recognize my card reader (with a CF card inserted).

My new Macbook Pro doesn't recognize my USB card reader with a CF card inserted. It works fine on my old Macbook Pro.
Do I need a new card reader? USB 3 perhaps?
I would appreciate any input that you may have. Thank you.

Hi, closereaching. Instead of spending 12 hours reinstalling your operating system and getting everything back up to date again, which probably won't accomplish anything, why not buy a $10 USB card reader for your Casio's SD card? Or (more expensive, but a much more elegant solution), an ExpressCard SD card reader that can stay in your computer all the time?

X201 Access Connections doesn't recognize WiFi card

Hi
A week or so ago I ran Lenovo System Update, which prompted me to update the drivers for my WiFi card (Intel 6200-AGN). After the update Access Connections can no longer recognize the card. Windows still connects automatically to wireless networks through the built-in software, but Access Connections not working is really bothering me.
I've tried rolling back the wireless drivers (my current version is now 14.3.0.6, dated 10/27 2011), but with no luck. As far as I can see, there have been no updates to Access Connections for quite a while (it's hard to tell due to system update itself recently being updated), but is it worth a try uninstalling it and reinstalling an older version? My current version is 5.97, oddly the version listed on the support page for the x201-3626 is 5.62, but all my Lenovo software comes from Lenovo System Update.
Thanks in advance for any and all suggestions.
Solved!
Go to Solution.

It's a new version AC related issue. Uninstall it and install previous version 5.93, manually.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Image Capture doesn't recognize SD card

In Tiger I would pop in my SD card into a reader in my pcmcia slot and image capture would read it as a device and I could then use it to embed color profiles etc. as it downloaded to the correct folder.
Leopard's Image Capture won't recognize the card as a device. It will mount and I can pull from it like a flash drive in the finder window, but I would love to use Image Capture again.
Anybody know what happened?

Geoff Cleary wrote:
I have filed a bug report with Apple.
I spoke on the phone with an Apple Developer Connection representative and have communicated with Apple via e-mail on a couple occasions now about this issue. They have had me follow some troubleshooting procedures and send them the results.
The bug report is still considered open, so they must be working on fixing the problem. Otherwise I would think they would have close the bug report by now. Maybe we'll see a fix in 10.5.2?
Also, I noticed the following interesting phenomenon: I made a disk image of my SD card and then ejected SD card. Upon mounting the disk image of the SD card, iPhoto launched, just as it used to under Mac OS X Tiger when I inserted my SD card. Intriguing!

CS3 doesn't recognize Nikon Raw files in Yosemite

Since updating to Yosemite on my MacBook Pro, CS3 no longer works properly.
Instead of thumbnails, Bridge displays icons for Nikon NEF images. When I click on the icon, I’m told “Could not complete your request because Photoshop does not recognize this type of file.”
When I attempt to open the image directly through Photoshop, I’m presented with a Photoshop Raw Options window asking me to describe the dimensions of the image. (I don’t know how to do anything other than guess at the size, and when the image opens, it looks like grey noise on an old TV screen.)
I’ve reinstalled CS3 but the problems remain.

That did the trick.
I followed the instructions for manually installing the Camera Raw 4.6 plug-in
Adobe - Photoshop : For Macintosh : Camera Raw 4.6 update
I had to purge the cache in Bridge, and once I did, the generic thumbnails became proper images.
Thanks again for your help. I'll think twice next time before updating my operating system.

Photoshop Elements 6.0 Camera Raw doesn't recognize my .RW2 files.

I downloaded the CameraRaw.8bi file, version 5.4.0.57 and copied it into: Program Files\Common Files\\Adobe\Plug-ins\CS2\File Formats after copying the old version to a safe place. I executed the CameraProfiles.exe program that was included in the ZIP file I downloaded. Elements 6 does not recognize my file format. I have a Panasonic LUMIX FZ28 that uses the .RW2 raw file format. The LUMIX FZ28 is included as a camera that this Raw Converter handles. The Read Me instructions for the install has the path as: Program Files\Common Files\Adobe\Plug-ins\CS3\File Formats, so I renamed my CS2 folder to CS3 and tried that, NO GO, still won't recognize the RW2 format, then I renamed the folder back to CS2. I don't know what else to do!! Can someone please help me? Thanks, Smokey Joe.

Camera RAW goes another place for Elements, not in the Photoshop Creative Suite subfolders. Scroll down further until you see a section specific to PSE 6 on Windows, or there are instructions on this page about 2/3 of the way down:
http://kb2.adobe.com/cps/407/kb407344.html

Bridge in CS4 doesn't recognize my RAW files . . .

I just got a Canon 5DMKII. When I download the RAW files into Bridge CS4, it does not recognize the file. I get the message, "Could not complete your request because Photoshop does not recognize the type of file".
I had no problem with my Canon 5D, it displayed the RAW files perfectely.
Any suggestions?

No I haven't. How do I do that?
I'm downloading some updates from the Adobe Updater, one of them was Camera RAW, so maybe that's it.

Doesn't recognize SD card files

Similar Messages

Maybe you are looking for