Doesn't start mavericks installation from usb drive

I tried to make a clean mavericks OS install from Mac OS 10.7.5. Firstly, I wrote Mavericks OS instal into the USB drive by the instructions, after that I made a restart and held the option. I choosed Mavericks OS usb to install and I got this:
Any suggestions what I did wrong? I wrote Mavericks OS couple different times to usb drive, but all the time happened like this. I used 8gb Kingston flash drive.

Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Similar Messages

Windows 7 installation from USB drive issue

I tried installing Windows 7 through a USB Thumb drive. I got an error message saying
"No device drivers were found. Make sure the installation media contains the correct drivers, and then click OK."
Please help me.

Hi:
See if either of the driver files I have attached work.
If they don't, I won't be able to assist you any further.
You will have to try each of them separately, because they have the same file names in the folders.
Download, unzip and copy just the files in the folders to a usb flash drive.
With the flash drive and W7 installation media plugged into the machine, boot from the W7 installation media.
After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
You should now see the storage driver files listed.
If you check the box, it will only include the compatible driver.
Follow the prompts and hopefully, W7 will install.
Attachments:
HSeries.zip ‏115 KB
SB7xx.zip ‏115 KB

Acroread doesn't start after installation from AUR

Hello,
i installed acroread from AUR (http://aur.archlinux.org/packages.php?ID=16980) and when i attempt to run it a get this message:
/usr/bin/acroread: line 22: /usr/lib/acroread/Reader/intellinux/bin/acroread: No such file or directory
/usr/bin/acroread: line 22: /usr/lib/acroread/Reader/intellinux/bin/acroread: Success
and nothing else happend.. any hints what's wrong?

thanks, bender02!
Well, here is what I did:
$ sudo pacman -Rs acroread
$ yaourt -S bin32-acroread
$ acroread
/opt/acrobat/Reader/intellinux/bin/acroread: error while loading shared libraries: libxml2.so.2: wrong ELF class: ELFCLASS64
So I installed lib32-libxml2
$ yaourt -S lib32-libxml2
finally I got acroread WORKED, however, here are the long warning information: Any suggestions?
$ acroread
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
Gtk-Message: Failed to load module "canberra-gtk-module": /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so: wrong ELF class: ELFCLASS64
Gtk-Message: Failed to load module "gnomebreakpad": /usr/lib/gtk-2.0/modules/libgnomebreakpad.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
/usr/lib/gio/modules/libgioremote-volume-monitor.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
/usr/lib/gio/modules/libgiogconf.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiogconf.so
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed
(acroread:11360): Gtk-WARNING **: /usr/lib/gtk-2.0/immodules/im-scim.so: wrong ELF class: ELFCLASS64
(acroread:11360): Gtk-WARNING **: Loading IM context type 'scim' failed

Serious problems after Mavericks installation with External Drive Lacie P9220.

Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
problem.
Many thanks.
Marco

Thanks very much for your reply.
Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
This is not my case, I never used any third party soft ...only OS X disk utility ...
best
marco

Booting the M60-104 notebook from USB drive - possible or not?

Hi,
i am using the windows XP on my hard drive(IDE ), i want to boot my pc using external usb hard drive. whenever i try to install the OS on /usb drive the first boot after copy of OS files itself fails saying, boot_device_unmountaable_fatal_error...something like this..i tried every trick i know to make this work..amazingly if i make my hard drive bootable on DOS with command.com on it..the system boots on DOS...which makes me think that the BIOS support the booting from USB drive..but none of the windows operating systems are booting from it...will any one is kind enough to solve the puzzle for me?????
thanks
praveen

Hello,
I can not say if it is supported on this notebook or not, but on some Satellite M series USB memory is a supported boot option. If you hit F2 on start up and go into BIOS then check boot, if it is supported it should be listed there. Otherwise it is not supported on this model. Hope that helps.

Attempting to install Windows 7 from USB drive keep receiving "No Bootable device -- insert boot disk and press any key" usb drive with windows 7 iso is inserted

As the topic says, i am trying to install windows from a usb drive, when i click install windows and the computer reboots to install a black screen comes up with "no bootable device -- insert boot disk and press any key" the USB drive is inserted and pressing any key does nothing. Help?

You need to follow these guides to install from USB drive
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed -100-working-guide/
good luck

Teamviewer doesn't start after resume from hibernation

Teamviewer doesn't start after resume from hibernation, what can I do to make it work?
I issued command "teamviewer --daemon start" but no success.

Quote from: BOSSKILLER on 07-July-08, 00:03:29
That's probably BIOS bug, have a ask MSI here: http://ocss.msi.com.tw/ They can send you a new BIOS to try.
I supposed that this issue is caused by BIOS bug, and this speculation was confirmed. MSI Support has sent to me link with BIOS version 132, which solves the problem
Under this link you can find this BIOS: http://rapidshare.com/files/127845890/a7395ims.132.zip.html
Regards.

Music doesn't start when selected from playlist have to push pause then start. Always playing one track behind what is on screen

Music doesn't start when selected from playlist have to push pause then start. Always playing one track behind what is on screen as my I-pad worksorks fine

Same problem here, since upgrading to IOS-5. Whenever I try to shuffle or play a genius mix (or even simply play an album) the iPod will skip the first one or two songs, play one song and then 'crash'. I say 'crash' because it selects the next song and then nothing happens - the player isn't paused, and it appears to think it's playing, but the time bar doesn't change and no sounds come out. Occasionally I've noticed the album artwork is wrong too.
Rebooting does NOT work - I've tried it a number of times.
Is this just an iPod problem?? If so, I would be surprised if Apple do anything quickly about it - they're more worried about iPhone problems I expect, and we (iPod users) are just the poor relations... C'mon Apple - SORT IT OUT!!!!

Tecra M2 - boot from USB drive

Hello
Why Tecra M2 don't have boot from USB drive in BIOS?
Is posible implemented this function in new BIOS.
Bye

Hello
Good question. You should ask this the Toshiba engineers.
However, I agree with Terentino and you can do nothing.
Greets

Can I install 10.6 OS X from USB drive? Imac 2008 24"

Can I install 10.6 OS X from USB drive? Imac 2008 24"

Welcome to the Apple Support Communities
You can, but it's a bit difficult because you have to copy the Snow Leopard disc content to a USB drive. There are a lot of pages which have got the steps to install Mac OS X Snow Leopard from the USB drive, like this page > http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html

Downgrading from Mavericks to Snow Leopard, can't boot from USB drive

I'm attempting to do a clean install of Snow Leopard on a 2010 Macbook. The MB had recently been upgraded to Mavericks, but because it was running slowly, I decided to downgrade. (If you respond to this post, please don't ask me why I'd make this decision.)
As with any other clean install I've done--all pre-Mountain Lion--I backed everything up, I created a .dmg file of the Snow Leopard, and made a perfectly good, bootable USB drive with the OS (1 partition, GUID table); I tested this USB drive on another Macbook, one currently running Snow Leopard, by holding option as I booted up. It works fine and gets to the installation screen.
I booted the Mavericks Macbook while holding command+r, and I erased the main HD. I then formatted it with 1 partition, with a GUID table. All was normal.
But here's where the problem starts. I plugged the USB drive into the formerly Mavericks computer, and held option for the bootloader. It recognizes the OS. But when I click the arrow to proceed, it inevitably has a kernel panic and tells me to restart the computer.
I re-made my bootable drive, and I tested it again on the other machine. Again, it's still fine. Plugged it into my main machine--again, a panic.
Using command+r to reach disk utility, I've now erased and repartitioned the computer's hard drive several times, even using the advanced-security erase feature. Still, the panic.
When I hold command+r at boot, it always forces me through the Internet Recovery. The only option offered to reinstall OS X is with Lion, which I didn't buy with my Apple ID.
What can I do?

Sorry, but this didn't help me. From what I gather, Mavericks (or maybe Mountain Lion) included a firmware update that, for some reason, prevents users from downgrading to anything before Lion. This makes things difficult, because I didn't buy Lion--I made the leap from SL to Mavericks.
Here's the strange part, I learned: When I enter Internet Recovery, I'm prompted to reinstall Lion, not Mavericks. And because I didn't buy Lion, my Apple ID/password, which are asked for, don't help.
Anyone else with suggestions? None of my USB-based installations are working, and I'm feeling out of luck. I don't want to spend money at the Apple store...

[Solved]Can't get past "Starting network" during installation from USB

I'm trying to do a fresh install of Archlinux on my laptop, following the Beginners Guide. However, I never get to the shell prompt because the installation gets stuck at "Starting network [Busy]".
These are steps I followed:
- I downloaded the latest Arch ISO.
- I wrote it to a usb stick ("Kingston Data Traveler") with "dd if=archlinux.iso of=/dev/sdb"
- I put the usb stick into my laptop (HP Pavilion dm1-4139sd), and booted it. I chose "x86_64". Everything seems to go fine, the only warning I get is: "microcode: failed to load file amd-ucode/microcode_amd.bin".
- I get the message "INIT: Entering runlevel: 3" and "Starting Syslog-NG [Done]", after that its endlessly (at least 20 minutes) stuck on "Starting network [Busy]".
I tried the following variations on the above:
- Wrote the ISO to a different USB, samen problem.
- Tried it with a different Arch version (from August), same problem.
- Turned kvm on and off, same problem.
- Pressed TAB at the "x86_64" line and added "acpi=off" to the end of it. I then get:
:: Triggering uevents....
[ 19.697932 ] usb 1-1: device not accepting address 2, error -110
:: Mounting '/dev/disk/by-label/ARCH_201209' to '/run/archiso/bootmnt'
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201209
[ 35.312165 ] usb 1-1: device not accepting address 3, error -110
[ 45.821422 ] usb 1-1: device not accepting address 4, error -110
[ 56.330681 ] usb 1-1: device not accepting address 5, error -110
[ 56.330681 ] hub 1-0:1.0: unable to enumerate USB devices on port 1
ERROR: '/dev/disk/by-label/ARCH_201209' device did not show up after 30 seconds....
Falling back to interactive prompt
You can try to fix the problem manually, log out when you are finished
sh: can't access tty; job control turned off
[rootfs /]#
I'm not sure what to do in this prompt. At least the network isn't working and none of the normal commands.
- I reset the DHCP leases on my modem, same problem.
- I turned off/on the hardware WLAN, same problem.
- I tried it with or without the LAN cable plugged in, same problem.
- I tried it with or without the battery plugged in, and with or without the power cable plugged in. Same problem.
I also performed the Arch memory test, and the bios hard disk test. They both report no errors.
I did an Arch installation a month ago on this laptop, and back then it didn't have this problem. I still have that arch installed from back then and it boots/works without problem (I have Starting NetworkingManager [Done]). I know I technically don't need to install arch again, as I still have the old one, but I wanted to clean the changes I made to some settings files and I if it turns out this is some kind of hardware problem I'd like to return it to the store.
Please help! I'm not really that familiar with Linux in general, so it might have been a very basic mistake from me as well. I have no idea what to do next, except for formatting my harddisk (which I don't think should influence the installer?), or trying to install a different Linux distro.
Edit: The solution that solved this problem for me in the end was resetting the BIOS to its defaults.
Last edited by dbakker (2012-09-15 11:28:14)

DSpider wrote:Did you check the MD5 checksum? If you downloaded it using a BitTorrent client, then you don't need to (its hash is checked during downloading).
Yes, I downloaded it using BitTorrent and the MD5 matches.
DSpider wrote:Try a different stick?
Yes, I tried it with 2 different USB sticks. They are both from the same brand ("Kingston DataTraveler"), so I might try different brands as well, but I don't think it is the problem.
DSpider wrote:Or at least a different method from that wiki page. For example, "dd"-ing it should work just fine.
The methods for writing the ISO that I tried so far:
The base method:
dd if=archlinux.iso of=/dev/sdb
(from an Arch install)
The method without overwriting your USB drive (created a FAT32 drive with an VFAT filesystem, from an arch install)
Using Imagewriter (from Windows)
Each method gives the same result: the laptop gets stuck at "Starting network [Busy]" when booted from one of the USB sticks. My modem indicates that it "sees" the laptop, but that the laptop has no established connection. When the laptop is stuck at the "Starting network [Busy]", all the activity on the USB stick stops (the light stops flashing).
The thing I find most strange is that the OS currently installed on the laptop has no problems booting or accessing the internet (both wired and wireless) at all.

Problem to install Design-Premium CS6, Installation without CD-drive, Message: put in CD 2 -installation from USB-Stick, Windows 8

I want to install my Adobe CS6 on my new Computer without a CD drive.
Is it possible?
I tried different kinds of installation.
1. From Harddisk
2. From USB (ISO burned to USB_Stick)
I always have the same problem:
Message: insert CD 2 (it's not possibel without a CD drive)
It would be great if someone can help me!
Thanks

Download CS6 products
Mylenium

Start Snow Leopard from USB on a mac mini early 2009

Hi.
It is possible to start Snow Leopard from a USB drive (Pendrive, USB disk, etc)??????
The DVD drive of my mac mini doesn't work properly and I have some problems with my HDD.
Thanks in advance.
BR

Get at least a 16GB USB thumb drive and use this tecnique to make a bootable USB drive:
Borrowed from Kappy,
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard being sure to select the external drive as the target.
Note that you will need a Snow Leopard DVD. The above will only work for you if you can boot your computer from a Snow Leopard DVD. If you have a new model that came with Lion pre-installed then the above will not work because a Snow Leopard retail DVD cannot boot your model.

W1-810 Acer Iconia 8W (W1-810) - Boot Windows Installation from USB

Hi everyone!
Yesterday I have succesfully updgraded my w1-810 from "Windows 8.1 with Bing" to "Windows 10 Home"... but looking in the System Info, I've seen that even though I have a 64-bit machine, my Windows is x32 (I noticed that the same was for Windows 8.1 before, but I hoped that during the upgrade the installation would've asked me if I wanted to install the x32 or x64 version of Windows 10... somehow). I've downloaded the Windows 10 Home x64 ISO via the Media Creation Tool offered by Microsoft and installed it on a USB Drive firstly using Windows 7 USB/DVD Download Tool (it worked with Windows 8/8.1, but this time it gave me an error like "I copied the ISO but couldn't make it bootable"), and then with Rufus (FAT32 and "MBR Partition for UEFI")... but after restarting the Tablet, it went straight to Windows, ignoring the USB. Reading around I discovered something about the BIOS, so I entered in it, selected "Erase all Secure Boot Setting", disabled Secure Boot, and lastlysetting the boot order so that it would begin with USB devices. Still nothing. Starting while pressing F2 (the Boot Menu) I see only "Windows Boot Manager", that brings me to the ususal Windows 10 login screen. Using the Advanced Startup from the OS and selecting "EFI USB", after the tablet restarts I get this error: "system doesn't have any usb boot option. please select other boot option in boot manager menu", and it kicks me back to the F2 Boot Menu, that looks just like before. Last thing I've done is today: with the Media Creation Tool I've re-downloaded Windows 10 Home x64 again, but this time I selected not to download an ISO, but to install it directly in the USB Drive... but nothing has changed. I've also updated the BIOS to 1.06: same as before. So... any suggestions? Unfortunately I can't find much informations regarding this issue for THIS model... I've found only this discussion, and read something about "rEFIt" for EFI boot menu and stuff... but since I know nothing about it, I don't want to, I don't know, force an installation I can't do and mess things up. Somewhere else I've read that I should switch from UEFI to Legacy mode... but from the BIOS of this model, I can't do it... Thanks for your help!

Por lo que sé necesitas un mínimo de 2Gb de ram para usar W10 x64, aunque los procesadores de tú máquina trabajen a 64 bits. La Iconia W1 810 trae 1 Gb en placa. Saludos

Doesn't start mavericks installation from usb drive

Similar Messages

Maybe you are looking for