Doesn't Stay in Source List

The nano doesn't stay in the iTunes source list, so I can only mess around with the settings while it's connected. With previous iPods the icon and options remained even when the iPod was disconnected. Am I missing an option box, or did they change something in iTunes 5?

I remember this feature being available only for the iPod Shuffle, and not any of the other iPods.

Similar Messages

  • IPhoto (version 9.5.1) screen doesn't display the source list, library etc

    When I open iPhotos (version 9.5.1) for a few seconds the line along the top with iPhotos, view, etc. appears, as does the list at the left with albums etc.  Then both the top and left disappear and only the events show on the screen.  I can access the iPhoto line along the top buy putting the cursor at the very top, but can't access the info that should be at the left side of the screen.  Can anyone help?

    Thank you... before I read your reply I plugged my iPad into the laptop to update the iPad and...wow...iPhotos was back the way it should be. 

  • Why doesn't my apple tv show up in my source list on itunes?

    I purchased a movie and then realized it didnt sync on my apple tv. So I go to my computer to see that the apple tv isn't listed in the sources. So far I have unplugged the apple tv, restarted it, restarted my computer, made sure all available updates have been downloaded, and also factory restored my apple tv.....still it doesn't show up.
    So how do I get my apple tv to show up in my source list?

    Troy McMeans wrote:
    how do I get my apple tv to show up in my source list?
    try the suggestions in this article.
    JGG

  • How to restore iPod when it doesn't appear in the Source List?

    About 6 months ago I stupidly wiped my iPod Nano (5th Gen) and reformatted it as fat32. I assumed that when I formatted it back to Mac OS Journaled it would work normally as an iPod again but it doesn't. When it is plugged into my Mac running 10.5.8, it appears on the desktop/mac harddrive (without its individualised nano icon) and it fails to appear in the source list in iTunes (10.2.2).
    I have tried everything I know how to do, including the steps outlined in this support document:
    http://support.apple.com/kb/TS1410
    I need to restore the iPod to factory settings, but need a way to do this not through iTunes seeing as the iPod is not recognised. Specifically, in the following support document I cannot complete step 4:
    http://support.apple.com/kb/HT1339
    One last thing I have tried is duplicating the files (including hidden ones) from a 5th gen nano that does appear in my source list, and placing those files into my apparently invisible nano but this has not made any difference.
    Does anyone have any suggestions? I have basically been left with a bricked paperweight (due mostly to my own stupidity!) but would love to be able to use it again.
    Thanks for any help offered

    Hello kismet_kracker,
    What happens if you place the iPod into Disk Mode with it still connected to your Mac?  Does it then show up in Finder as a mounted drive?  Here are instructions for putting your iPod into Disk Mode.
    http://support.apple.com/kb/ht1363
    B-rock

  • Why doesn't the dvd show up in my source list?!?

    i putt a dvd into my cd/rom drive cause i wanted to download it onto my ipod, but it doesn't show up. i tried another dvd and it didn't show up in my source list either. why doesn't it show up? what can i do to make it show up? please help.

    Can I transfer my DVDs into iTunes and sync to my iPod?
    iTunes and QuickTime Pro do not support importing content from DVD videos.
    Heres the Apple link if you can understand it.
    http://docs.info.apple.com/article.html?artnum=302758#5A
    "i putt a dvd into my cd/rom drive "
    A Cd Rom Drive will not read or play a DVD anyway..sorry.

  • My iPod doesn't appear on the iTunes source List!! Help!!

    I'm havin' a problem with my iPod, doesn't appear on the iTunes source list. And I have to update the iPod software cause I need to fix a problem: my iPod seems to be empty when turn it on but in the iPod's hard disk still the mp3 files, I already made a backup of this mp3 files. I know I have to restore my iPod to fix the problem, but I can't do it , cuz it doesn't appear on the source list. Can anyone please help me with these problem? Thanks!!

    I've checked a few help pages that I've seen other people post that appeared to be of some relevance to my problem but still nothing. Can anybody out there provide any help?

  • My ipod was sst up/registered using my mac computer. Unfortunately, it was plugged into a pc and all my songs, pics, etc were erased. Now when i plug it into my mac to sync it, my ipod doesn't even show up in the source list. I can't restore it. Any ideas

    My ipod nano 4th generation was set up/registered using my mac computer. Unfortunately it was plugged into a pc and all my files, (song, pics, etc) were erased. When I plugged my ipod into my mac to sync it again, it wouldn't even appear in the source list. I can't even click on it to restore it. It's simply not there. Any ideas on how I can get it to appear in my source list and sync it again using my mac? Suggestions would be greatly appreciated! Thank you!
    Steve

    Which OS & iTunes versions do you have?

  • How can I make my Shuffle stay in the Source list with Version 7??

    No longer in the IPOD options that I can see????

    Blackstar,
    Unfortunately, for reasons unknown, the Keep this iPod in the source list option does not exist in iTunes 7.
    So the first thing you will probably want to do is let Apple know your feelings on the matter by submitting the form on this support page .
    Done that? Okay then, so now you'll probably want to make the best of the situation by figuring out if there's any kind of workaround to deal with the matter.
    The best I can come up with is suggest that you create a playlist dedicated to your iPod shuffle which, for discussion's sake, we can call the Shuffle Playlist.
    Once you have created that playlist, when you connect your shuffle to your computer you can drag the Shuffle Playlist into your shuffle.
    After disconnecting the shuffle you can get to work on modifying the Shuffle Playlist for your next update.
    Note that you will have to manually clear the iPod shuffle's contents before putting a new Shuffle Playlist on it.

  • Keeping Ipod Icon in iTunes source list when Ipod is disconnected

    My shuffle icon used to stay in the iTunes source list even when it was disconnected, which was really nice to make changes and then connect the ipod to update all at once, but it has disappeared. I have done some searching and can't find the answer. Any help would be great, thanks!

    Anthony,
    Only shuffles have this "feature"...since regular iPods can sync against any number of selected playlists, one really doesn't need this capability as it less powerful than what is provided.
    Tom

  • How can I remove Facebook from the iPhoto source list?

    Lately when I use iPhoto it will not let me quit and I have to force quit. I recently moved to college where there are several separate internet routers. I realized I still had iPhoto sharing turned on from using it at home and thought that might be messing it up, but even after I turn off sharing it will not let me quit. I think it is a problem with Facebook because it asks, "still syncing would you like to stop and quit?" whenever I try to quit the program. I would like to just remove Facebook from my source list, but I can't figure out how. It used to ask me to sign in to Facebook if I wanted to upload pictures but now it doesn't so I have no idea how to make it quit syncing.

    I found the solution in the community
    Solution 1
    Mac OS: Run the uninstaller in the Applications/Utilities/Adobe Installers folder to remove the program listed as up-to-date.
    Windows: Use the Programs And Features Control Panel to remove the program listed as up-to-date.

  • IPOD Nano not in source list

    OK... I've read several threads, and there doesn't seem to an answer out there...
    The other night while updating my Nano (the second day I had it) it disappeared from the source list and hasn't reappeared. About half of my MP3s updated to it before it died. Now it just says "Do not disconnect" for days at a time. I can see the device in Windows XP explorer as an unnamed mass drive, but iTunes won't list the device as a source and I can't see any of the options for it. I've done all of the "R's" as far as resetting... even reinstalled iTunes from the web to ensure I had the latest version.
    Any help out there?
    Nano   Windows XP  

    This worked for me after downloading that confounded 3_23 update:
    1. Go to Start > Run
    2. Type "diskmgmt.msc" (without quotes). If it tells you it can't find that program, try it without the ".msc"
    3. That opens the Disk Management program.
    4. You should see your Ipod listed as one of the "volumes." It may not be identified as an Ipod; might just say "removable storage device" or something like that. You can tell it's your Ipod by the gig space shown. If it's a 4 gig Ipod, you should see something like 3.7 gig shown (less if you've filled it with music already).
    5. Right-click on that device and choose "Format..."
    6. Choose the "FAT32" option and click "OK" or whatever it displays to start formatting (I forget, and I'm not testing it again now!)
    7. You will lose any music files on the Ipod, but when it's done, your PC and Itunes should recognize the Ipod, and it should then work normally.
    Be careful in that Disk Management program. You could wipe your hard drive if you choose drives incorrectly.

  • How do i sync all my iphone 5g photos and contacts to my new windows computer.  I have followed instructions but the following instructions don't seem to exist!!!In iTunes, in the source list, under Devices, click the entry for your iPhone or iPod touch.

    How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply.  In the source list click devices (so far so good) then click the entry for your iphone or ipod.  that doesn't exist. HELP asap

    hayley7070 wrote:
    How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
    What instructions?
    In the source list click devices (so far so good) then click the entry for your iphone or ipod.  that doesn't exist. HELP asap
    You don't import photos from the iPhone to your computer using iTunes.
    See this -> iOS: Importing personal photos and videos from iOS devices to your computer
    Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer.

  • Adding photo to iPhoto 9.2.1 slideshow reorders Source list

    Hi All
    I have made a slideshow (100 photos) in iPhoto 9.2.1 and being careful duplicated the slideshow.  I then added more photos to the duplicated Slideshow source list only to find the slideshow re-orders the list of photos.  I've never experienced this problem before.  Quitting and reloading doesn't stabilise the Slideshow.
    I managed to add another 8 by adding 1 then couple at a time.  But now trying to add more just 1 photo re-orders the list. 
    I've also turned off the music.
    I never had a problem with 100+ slideshows with iPhoto before.  Apart from trying to change the lead photo which would cause iPhoto to freeze.
    Anyway, has anyone else experienced this issue and can anyone suggest a way around this ? 
    Thanks so much.  JJ

    I've had this very same issue and it's making me very upset. I'm looking for an answer to this!

  • Iphone 5 not showing up in iPhoto source list

    When I plug in my phone to download photos to iphoto iphone doesn't show up as device in iphoto source list-it does appear in itunes

    Are you running the latest iPhoto (version 9.4.2)?

  • IPod not showing up in iTunes source list

    Hi,
    My fifth gen iPod is not showing up in the iTunes source list. I've tried the troubleshooting recommendations (unistall and then reinstall iTunes, delete the iPod/bin file and then update iPod software, etc.) The only one I have not tried is restoring the iPod to factory settings because that would erase the entire contents and since I can't see it in iTunes I couldn't add them back in.
    Does anyone know what I can do to get the iPod to show up in the iTunes source list?
    Thanks

    Hi. I'm not sure I'm using this discussion form correctly. Anyway, I'm on an iBook. OSX 10.2.8 and recently purchased a fifth gen ipod. connected everything just fine and have been importing some CDs to itunes and updating songs on the ipod for a couple of days. Listening to music, the whole deal.
    today, was trying to eject my ipod and computer froze. Restarted my computer and everything is gone from my ipod. Started the procedure of updating the ipod to reload the songs (still in itunes library) and realized that ipod is not showing up in my itunes source list.
    Did the 5 Rs. Haven't reinstalled software cause not sure how.
    Any help?
    Welcome to Apple Discussions!
    First try resetting your iPod again (several times
    may be needed). Connect it to your computer, and see
    what happens.
    If your iPod appears in "My Computer", then have you
    tried out all the suggestions in this article?:
    iPod appears in Windows but not in iTunes
    In your case, you'll probably need to assign your
    iPod a different drive letter (because your computer
    may be recognizing the iPod as a network device).
    If your iPod doesn't appear in "My Computer" however,
    then try the following. If it already does, then
    assign it a different letter following the
    instructions further below.
    I'm presuming that you've read through all the
    suggestions in this article below, correct?:
    iPod doesn't appear in Windows or in
    iTunes
    Restoring may be worth it, by the way, because
    restoring formats your iPod to your computer, so it
    may be recognized after doing this.
    Have you tried the Five R's?
    The
    Five R's
    If there are other hardware devices that are
    connected to your computer's USB ports (printers,
    camera), then try disconnecting them, resetting your
    iPod, and connect your iPod to your computer once
    more.
    Try getting your computer to recognize your iPod by
    also: operating in manual disk mode:
    Putting your iPod into disk mode
    Assigning your iPod a different drive letter
    Now, see if your iPod is recognized by Control Panel,
    and try assigning it a different drive letter:
    1 - Don’t plug in your iPod yet.
    2 - Go to "START -> Control Panel -> Admin Tools (if
    you don't see this, click on "classic view" button on
    the left panel) -> Computer Management."
    3 - Click on the "Disk Management" button in the left
    panel area.
    4 - Now, with "Computer Management" and Control Panel
    windows opened, reset your iPod, and connect it.
    5 - Right-click on your iPod's listing there (after a
    few moments when it gets recognized in this drive
    window), and click on "Change Drive letter and
    Paths". Then the "Change..." button.
    Here's what it should look like:
    Assign your iPod the letter "M" "N", "O" or the like
    (further along in the alphabet).
    For more details, see this article:
    Windows confuses iPod with network device /
    Changing drive letter
    I hope this helps you, post back if you have issues
    with performing any of these things.
    -Kylene
    If any post helps or
    solves your issue, please mark it that way
    accordingly. Thank you for helping the boards!

Maybe you are looking for

  • Why my Ipod Touch 4g doesn't show all my iTunes Match library?

    I'm connecting my iPod Touch 4g to iTunes Match (using WiFi) but it isn't showing all my files. If I choose the option "Music" I can see all of them, but if I select "Artists" or "Albuns" I can't see them anyway. Even when using the "Search" tool, so

  • Application of Hold on Sales Order

    Hi All We are looking to define HOLD which should apply on Sales Order based on a particular Payment Term i.e. 1% Net30. Is there any standard functionality which can be used to meet the condition. Orders should automatically go on Shipping HOLD if t

  • Checking whether data exists in a BLOB type database column in Forms 6i

    I am developing an application regarding inventory of a plant's spare parts. I am storing photo (.bmp) of spares in the database in a column of BLOB type. Once user punches spare's code, form displays spares data on screen using EXECUTE_QUERY. At thi

  • Shared Content InDesign Plugin for InDesign CS4 won't open file

    Yesterday I discontinued using Adobe CC and went back to using my Adobe InDesign CS4.  CS4 is working OK but there is ONE file that won't open.  I get the message "Shared Content InDesign Plugin is currently not available on your system".  The file w

  • Iweb:  photos blur?  and formatting question

    Does anyone know how to prevent photos from blurring when you publish a page to dot mac? On my photo page, (only) 2 of the photos appear blurry. I have tried to re-publish, to no avail. Also - is there any way to include column formatting in text? I