Doesn't work after upgrade to leopard

I recently upgraded my iMac G5 to Leopard, and had been running GarageBand 2 since I got the computer. After upgrading, when I try to work on a song, none of the tracks show up. Usually one or maybe two will be visible, and when I create new tracks, it just appears over the top of the existing tracks. If I click on the track and drag the mouse down as if to rearrange them, all the tracks appear, but disappear as soon as I let go of the mouse.
I'm stumped. I really have no idea what could be wrong, and I don't want to spend $80 to upgrade to the new iLife when I don't need it.
Is this some sort of installation corruption, or is this version of garageband incompatible with leopard? And what can I do to fix it?
Thanks

I also had some trouble with this until I stumbled onto a post pointing to David Powers' tutorial.
http://foundationphp.com/tutorials/php_leopard.php
Hope this helps anyone else stumbling around the interwebs.
Oh and make sure to pay special attention to the paragraphs at the bottom
+" If there are several .conf files to copy, you can use the following command instead:+
+sudo cp *.conf /private/etc/Apache2/users+
+_However, if you have previously installed the Mac PHP package from Marc Liyanage, do not copy entropy-php.conf._"+
Message was edited by: osterbro

Similar Messages

  • New apple wireless keyboard doesn't work after upgrade to leopard on mini

    I am posting this because I have not seen anybody else post this issue, but it is fixed at this point.
    I installed the new apple ultra slim wireless keyboard on my mac mini about a month ago...was working great...until I upgraded to Leopard. The keyboard would connect, and the esc, function, and arrow keys would work great. However, none of the letter, number, or enter keys would work. This was all observed using the 'show keyboard viewer', which is accessible by allowing 'show input menu in menu bar' from the 'international' system preference pane.
    I rebooted many times and even updated to the latest leopard patch set.
    During this whole time, the wireless mighty mouse has worked without issue.
    I removed the device and added several times with no change. I even moved the wireless keyboard to my G5 and it worked great over there.
    After a few days of trying various things to no avail, I was finally able to get the keys to work, but I am not sure why. I had a wired keyboard connected and kept going back and forth between the wireless and wired keyboard and all of a sudden it started working. Very strange.

    this problem is fixed, but if anybody has an idea what happened, I would like to know.

  • Apache doesn't work after upgrade to Leopard

    Hi,
    I did "upgrade" install of Leopard, and clicking on URL that comes up in web sharing in system preference gave me "forbidden 403" thing.
    Found this instruction on making .conf file in /etc/apache2/users/ -->
    http://docs.info.apple.com/article.html?artnum=306884
    Made the file as instructed.
    Now I get "unable to connect, can't establish connection" message.
    Also found this tip on changing ownership of Site folder -->
    http://www.macosxhints.com/article.php?story=20071027155902154&query=leopard%2Bu pgrade%2Bapache
    Which I tried, but apparently I am not a member of group "staff".
    (I don't see any "group" in account in system preference)
    error message off Terminal is -->
    httpd: Syntax error on line 455 of /private/etc/apache2/httpd.conf:
    Syntax error on line 15 of /private/etc/apache2/extra/httpd-userdir.conf:
    Syntax error on line 1 of /private/etc/apache2/users/myu.conf:
    /private/etc/apache2/users/myu.conf:1: <Directory> was not closed.
    line 455 of /private/etc/apache2/httpd.conf is:
    /private/etc/apache2/httpd.conf
    line 15 of /private/etc/apache2/extra/httpd-userdir.conf is:
    Include /private/etc/apache2/users/*.conf
    /private/etc/apache2/users/myu.conf is:
    <Directory "/Users/myu/Sites/">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    Please someone point me in a direction to get it working....

    I also had some trouble with this until I stumbled onto a post pointing to David Powers' tutorial.
    http://foundationphp.com/tutorials/php_leopard.php
    Hope this helps anyone else stumbling around the interwebs.
    Oh and make sure to pay special attention to the paragraphs at the bottom
    +" If there are several .conf files to copy, you can use the following command instead:+
    +sudo cp *.conf /private/etc/Apache2/users+
    +_However, if you have previously installed the Mac PHP package from Marc Liyanage, do not copy entropy-php.conf._"+
    Message was edited by: osterbro

  • Mail server doesn't work after upgrading from SL to ML

    My Mail server doesn't work after upgrading from SL to ML
    Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
    the problem seems to be related with dovecot ... in my smtp log i get this:
    relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
    I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
    Any Ideas?
    Cheers
    Carlo
    This is my postconf -n info:
    server:Data admin$ postconf -n
    biff = no
    command_directory = /usr/sbin
    config_directory = /Library/Server/Mail/Config/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    data_directory = /Library/Server/Mail/Data/mta
    debug_peer_level = 2
    debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
    dovecot_destination_recipient_limit = 1
    enable_server_options = yes
    header_checks = pcre:/etc/postfix/custom_header_checks
    html_directory = /usr/share/doc/postfix/html
    imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
    inet_interfaces = all
    inet_protocols = ipv4
    mail_owner = _postfix
    mailbox_size_limit = 0
    mailbox_transport =
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 20971520
    mydestination = $myhostname, localhost.$mydomain, localhost
    mydomain = moremoremore.it
    mydomain_fallback = localhost
    myhostname = server.moremoremore.it
    mynetworks = 127.0.0.0/8,192.168.178.0/24
    newaliases_path = /usr/bin/newaliases
    queue_directory = /Library/Server/Mail/Data/spool
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost = mail.mclink.it
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
    smtpd_enforce_tls = no
    smtpd_helo_required = yes
    smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
    smtpd_pw_server_security_options = cram-md5,gssapi
    smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
    smtpd_sasl_auth_enable = yes
    smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
    smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
    smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
    smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
    smtpd_use_pw_server = yes
    smtpd_use_tls = yes
    tls_random_source = dev:/dev/urandom
    unknown_local_recipient_reject_code = 550
    virtual_alias_maps =
    server:Data admin$

    if this could help:
    mail:setStateVersion = 1
    mail:readWriteSettingsVersion = 1
    mail:connectionCount = 11
    mail:servicePortsRestrictionInfo = _empty_array
    mail:protocolsArray:_array_index:0:status = "ON"
    mail:protocolsArray:_array_index:0:kind = "INCOMING"
    mail:protocolsArray:_array_index:0:protocol = "IMAP"
    mail:protocolsArray:_array_index:0:state = "RUNNING"
    mail:protocolsArray:_array_index:0:error = ""
    mail:protocolsArray:_array_index:1:status = "ON"
    mail:protocolsArray:_array_index:1:kind = "INCOMING"
    mail:protocolsArray:_array_index:1:protocol = "POP3"
    mail:protocolsArray:_array_index:1:state = "RUNNING"
    mail:protocolsArray:_array_index:1:error = ""
    mail:protocolsArray:_array_index:2:status = "ON"
    mail:protocolsArray:_array_index:2:kind = "INCOMING"
    mail:protocolsArray:_array_index:2:protocol = "SMTP"
    mail:protocolsArray:_array_index:2:state = "RUNNING"
    mail:protocolsArray:_array_index:2:error = ""
    mail:protocolsArray:_array_index:3:status = "ON"
    mail:protocolsArray:_array_index:3:kind = "OUTGOING"
    mail:protocolsArray:_array_index:3:protocol = "SMTP"
    mail:protocolsArray:_array_index:3:state = "RUNNING"
    mail:protocolsArray:_array_index:3:error = ""
    mail:protocolsArray:_array_index:4:status = "OFF"
    mail:protocolsArray:_array_index:4:kind = "INCOMING"
    mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
    mail:protocolsArray:_array_index:4:state = "STOPPED"
    mail:protocolsArray:_array_index:4:error = ""
    mail:protocolsArray:_array_index:5:status = "OFF"
    mail:protocolsArray:_array_index:5:kind = "INCOMING"
    mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
    mail:protocolsArray:_array_index:5:state = "STOPPED"
    mail:protocolsArray:_array_index:5:error = ""
    mail:startedTime = "2013-01-21 21:18:32 +0000"
    mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:SMTP Log = "/var/log/mail.log"
    mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
    mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
    mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
    mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
    mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
    mail:servicePortsAreRestricted = "NO"
    mail:state = "RUNNING"
    mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

  • ITunes doesn't work after upgrade to iOS 6

    iTunes doesn't work after upgrade to iOS 6. The white screen with gray tape above appears, and nothing more happens. Reinstalling/restoring iOS doesn't help. I have contacted support team in my country (Russia) by phone, but they could not solve the problem. Is there downgrade to iOS 5.1.1 available?

    What printer are you using?  Is it listed here:
    http://support.apple.com/kb/ht4356

  • TS4268 FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

    FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

    Hi AnaMusic,
    It was working perfectly before the upgrade to ISO 6.0.1, but now I can't log in using my apple ID ... I have tried all suggestion from Tom but nothing does work. I keep getting the message "FaceTime can't log in, check your network" is nothing wrong with my network everything else works fine, I can log in into FaceTime using my IPad 2 and my apple ID.
    I'm currently working in Korea, but I bought the IPad in Australia,
    Regards,
    Namur

  • Sound input (line-in) not working after upgrade to Leopard

    I have upgraded my iMac Intel Core 2 Duo (white plastic frame version) to Leopard on Friday when it released. The upgrade process went very well with one MAJOR exception: Audio input through "Line-in" connection does not work anymore. I have tried everything that comes to mind so far from rebooting, to unplugging and replugging, to checking back all system settings, etc. Nothing works. At this point, I can't use my headset anymore for making calls with Skype or using voice chat in games. I would seriously need some help as I refuse to have paid $129 only to have Apple themselves break something in their products.
    For this reason, I have to currently consider Leopard a failure. Reason being, in MS Windows or Linux, there always is a way around to make things work... I can't find anything at all with this release of the OS.

    The OP reported their line-in input "broke" after upgrading to Leopard, however my MBP stopped recognising input from the mic on my headset a few weeks ago when I was still running Tiger. This might possibly indicate that the change in OS X's handling of the line-in input was present in a Tiger update, but I can't remember the exact correlation between the dates of my last update and this problem. All the same, I'm pretty annoyed that a headset that worked perfectly for several months is now suddenly unusable without a USB adapter.
    Prior to stumbling across this thread, I visited two Apple stores, who both tested with an output from an iPod and told me that the input was working fine, leading me to buy a brand-new headset (even though I'd tested other working headsets without success) which, naturally, produced the same results.
    Seems to me that the hardware is fully capable of processing a mic input through the line-in port, as it's never had any problems with any unpowered source until recently, so Apple must surely be able to undo the change they made?

  • Cd drive doesn't work after upgrade

    why doesnt the cd drive work after upgrade to mountain lion 10.8.5

    sometimes they stay in, but it doesnt sound normal, weird clicking noises, and sometimes it just spits the cd out.

  • Spotlight and iCal search not working after upgrade to Leopard

    I recently upgraded my MBP to Leopard (10.5.7), and everything seemed fine. Except search in iCal wasn't working. I looked in forums and found a suggestion - renaming Calendar Cache in Home>>Library>>Calendars, then restarting iCal. iCal rebuilt the Calendar Cache (or looked like it was, progress bar and all), but search still wasn't working, failing to bring up events I was looking right at.
    Then I tried to use Spotlight, and it didn't seem to be working either. I tried searching for Safari, and after a brief pause, Spotlight said "No Result Found." I confirmed Safari is in fact still on my MBP and working (opened from applications folder). After some more hunting on forums, I found a thread talking about how to force Spotlight to re-index, figuring that was at least Spotlight's problem. Here's the thread - http://forums.macrumors.com/showthread.php?t=381832
    I tried what it suggested, using the command line in Terminal, but Terminal just spat back "No Index." So now I'm stumped. Any ideas? I've already tried rebooting, to no effect, though I'll try it again tonight.

    Well, thanks again for all the suggestions, but I sort of stumbled on the fix - which turned out to be upgrading MacFUSE. I had forgotten I installed that so I could read/write to my BootCamp Windows partition under Tiger, and a couple times when I would restart my computer I'd get an error message about MacFUSE (ironically, the error claimed my OS was out of date, but it was really MacFUSE that was out of date).
    After I updated to the latest version of MacFUSE and restarted, Spotlight started indexing. Now it works just fine. Not sure if this is a known issue, but it seems that was most likely the problem.
    Now I just have to figure out why the search feature in Calendar doesn't work... already tried rebuilding the Calendar Cache multiple times. Any ideas for that one?

  • HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

    installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
    +Hello Charles,+
    +Thank you for contacting HP Total Care.+
    +I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
    +I appreciate for the opportunity to assist you.+
    +*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
    +I will be more than happy to assist you when you change the OS.+
    +For information on keeping your HP and Compaq products up and running, please visit our Web site+
    at:
    +http://www.hp.com/go/totalcare+
    Sincerely,
    Sentinaro
    +HP Total Care+
    +Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
    +For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
    +HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

    Help! I've spent hours researching this and can't find a solution...
    I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
    Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
    Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
    Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
    Very Respectfully,
    Bobby G.

  • Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

    Hi,
    Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
    sp2, some of the part doesn't work propertly any more.
    1. netui:select seems not bind form data propertly. For drop down list box in
    forms, although user has chosen something from the drop down list box, the returned
    value in the form is always null.
    2. we use Java script window.open(url,...) to download and view files. After upgrade
    from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
    can not open this Internet site. The request site is either unavailable or can
    not be found. Please try again later", although the server and the files are all
    in local host server.
    Please help. Thanks

    Did you update your workshop application files and recompile your application?
    A few things changed between GA and sp2, some annotations were renamed, and some
    were added.
    If you open up your application in Workshop sp2, it should given you the option
    to upgrade your application.
    Failing that, you may need to go through the code that is not performing as it
    was before and check whether it was not utilising a bug that was fixed in sp2
    and thus causes it to not function correctly now.
    "Cynthia" <[email protected]> wrote:
    >
    Hi,
    Our application worked on workshop 8 sp1. After we upgrade system from
    sp1 to
    sp2, some of the part doesn't work propertly any more.
    1. netui:select seems not bind form data propertly. For drop down list
    box in
    forms, although user has chosen something from the drop down list box,
    the returned
    value in the form is always null.
    2. we use Java script window.open(url,...) to download and view files.
    After upgrade
    from sp1 to sp2, clients keep getting IE error complaining that "Internet
    Explore
    can not open this Internet site. The request site is either unavailable
    or can
    not be found. Please try again later", although the server and the files
    are all
    in local host server.
    Please help. Thanks

  • Canon S750 printer not working after upgrading to Leopard

    Leopard is brilliant, and everything works after I upgraded from Tiger except... my Canon S750 printer gives error messages and fails to print. This is VERY annoying. I can't seem to find an S750 driver for OS X 10.5 on Canon's web site. So, what to do next? Just wait, and keep logging on to Canon's web site in the hope that, one day, the driver will be there? I can't find any official statement from Canon as to what they're up to. Are they currently working on drivers for Leopard? Do they have any projected "release dates"? Are they at all interested, or would they prefer to sell me another printer perhaps? Any information on what I should do now will be gratefully received. Thanks.

    UPDATE... my S750 printer has suddenly started to print OK! This is rather bizarre, since I've not re-booted, haven't un-installed/re-installed the printer. End of topic!

  • [solved]wacom doesn't work after upgrade to xorg 1.6 and kernel 2.6.29

    hello..
    i have already posted about that in testing-forums, but since xorg 1.6 and kernel 2.6.29 have moved to extra, though i'd create a seperate topic about that.
    after i have upgraded to xorg 1.6 and kernel 2.6.29 my wacom device (as built-in, not usb) on my thinkpad x41t stopped working.
    before upgrade i have used xorg with hotplugging enabled. everything worked fine.
    after wacom stopeed working i removed everything regarding input devices from xorg.conf -> no change
    put an fdi-file for wacom -> no change
    installed linuxwacom-dev -> no change
    i don't really know, if it's a kernel or an xorg issue. loading wacom drivers manually still doesn't solve the problem. no warnings or errors about wacom in xorg-log or messages.log
    how could i check, wether my system recognizes the device properly at all? it doesn't show up in lspci or in lsusb.
    any help would be great.
    Last edited by lynucs (2009-04-14 18:57:17)

    well, upgraded again to xorg-server 1.6, disabled hotplugging, installed linuxwacom-dev from aur and the wacom works as allways. (had to edit xmodmap one more time, since kbd returns other keycodes than evdev does :-| ). no matter, done is done.
    but intel driver returns broken graphics if i rotate screen with xrandr.
    i guess there is no way around this execpt switching to the ultra-slow legacy driver?
    just for comparison - glxgears fps:
    intel: ~900fps
    intel-legacy: ~280fps
    Last edited by lynucs (2009-04-14 18:56:48)

  • Google Maps Widget doesn't work after upgrade to Safari 4.0

    After a lengthy bit of trouble shooting with an iWeb specialist yesterday, we reached a conclusion that somehow installing the release version of Safari 4.0 (released Monday, 6/8) causes the GoogleMaps widget to not function or display properly. Using backup harddrives of recent systems, the widget worked properly in OS X 10.5.7 running iWeb 3.0.1 with both Safari 3.2 and the BETA VERSION of Safari 4. On that same system, once I download and installed the release of Safari 4., the maps widget would not work or display properly.
    To describe what doesn't work: None of the options (search field, address bubble, or zoom controls) appear regardless of what the user selects in the HUD when creating or editing the content. I am unable to pan and/or scroll around the map within its bounding box at all. The only thing I am able to do is edit the address field in the HUD and end up with a map with that location centered in the window.
    The AppleCare specialist didn't have much response in that I think this is a brand new and VERY obscure bug.
    I am curious to know if anyone else has exprienced this condition.

    It may be obscure in iWeb but the Safari 4 update has messed up the Google maps in iPhoto big time. Be sure to report it as they are all related to the Safari 4 upgrade and probably only be solved by a Safari fix.
    http://www.apple.com/feedback/iweb.html
    OT

  • Right headset doesn't work after upgrading iOS

    I use iPhone 4 32GB. I upgrade the iOS from 5.1.1 to 6.1.3. On the previous iOS, i don't have any problem. But after i upgrade my phone, my right headset doesn't work. I've clean the jack, plug, etc; I've tried to change the sound settings, music setting, etc, but it doesn't change anything. My headset still mute, exactly the right side. The left one is still okay. I've tried to plug another jack and nothing change. Anybody help :'(

    If you've made sure it's clear of any debris/dust, tried using a different pair of headphones and it still didn't work, I would contact Apple with the hardware issue and find out what your replacement options are.  It might be conincidental, but a software update shouldn't change the jack on the phone because that is hardware. 

Maybe you are looking for