Doesn't work with a servlet other than ActionServlet

Hi,
We are doing portlet struts development which uses an extended version of the struts ActionServlet. It appears that if the web.xml defines a servlet class other than "org.apache.struts.action.ActionServlet" then the AppRay fails to find the struts configuration file - Struts Configuration is coloured red in the AppXplorer view.
e.g.
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
is fine but
<servlet-class>com.ibm.wps.portlets.struts.WpsStrutsPortlet</servlet-class>
is not, even though the class is on the classpath.
Thanks.

Hi,
Please follow this workaround to identify struts configuration.
Modify web.xml to include a servlet entry for org.apache.struts.action.ActionServlet with "config" definition in addition to your custom servlet
NOTE: The existence of "temp" servlet does not affect any runtime behavior.
Ex:
<servlet>
<servlet-name>temp</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
</servlet>
Thanks
M7 Support

Similar Messages

SMB under 10.7.6 doesn't work with Lexmark and others

I understand that Apple has changed SMB -- and it is not incompatible with lots of applications and devices (e.g. Lexmark scanners than scan to Mac). Short of going back to Snow Leopard, is there a way to get the "old" SMB to replace the 10.7.6 SMB -- or is there a prayer that Apple will "fix" this problem?
Thanks,
Jim

You must configure the destination path through the Lexmark printer web page.
http://www.lexmark.com/publications/pdfs/2007/x560/v8752703_en.pdf
Page 78, "Creating an FTP address using the Embedded Web Server"
At 6.d
If the FTP server requires you to log in, enter the name and password in the appropriate fields
Let's say
Username Jim
Password jimpassword
At 6.e
If you want to use, for example, a folder called Scanner inside your Pictures folder, into server path field type
Pictures/Scanner
If you leave it blank, scanned image goes to your home folder

Alt Key Doesn't Work With Tools

Suddenly the Alt key doesn't work with Clone and other Tools. When it's pressed, it shows a double arrow (black/white)cursor and a selection is not defined.
I did a forum search and found this
Q: My Alt key doesn´t work when using the Clone, Lasso, Magnifyer.. Tool.
A:
Some programs and utilities takes control of the Alt key when installed.
GuruNet (Atomica) and FlySwat are two of these applications. Uninstall them and re-claim the Alt-key, and all should be fine.
...but these programs are not on my PC. Plus, the Alt key works fine in other programs. I'm using CS.
I'm desperate to fix this. Any help is greatly appreciated.
- CJ

Dear Awe,
>Crumbs in the board?
Thank you!!! My first thought on reading your msg was "You gotta be kidding". Then, "well, why not". So I did it and it worked. Amazing. Learn something new every day. In 18+ years of computer use I never had this problem (I've had lots of dirty keyboards, but never this problem). Must have been a big crumb. The only mystery though is why the key worked ok in another program. Anyway, a thousand thanks.
John, thank you for your reply too. I looked in the Regional Settings but couldn't find anything re keyboard mapping. I'm using XP.
Best Regards,
CJ

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

At one time tool recording was not possible and if you install Adobe Scriptlistener Plug-in Adobe will disable tool recording its never an option.
I use and record actions all the time and was looking forward to tool recording when Adobe announced it. However I found what they delivered was of very limited value because of the restrictions. I do not care that Adobe disables tool recording on my machine.
The amount of data that gets reordered seems also vary between machines. I found that Action recorded on fast machine are not usable on slow machine. Fast machine recorder too much data.
Documents you use such action on must also have the same size and resolution as the document you recorded the action on. Quite a restriction.
You problem may also be foxed in CC 2014 sett here Photoshop CS6 - Recording the clone tool in an action gives incorrect results on replay.

Push mail on iPhone doesn't work with my .mac address, all other accounts working fine. Does anybody experienced problems like this?

Since upgrading to IOS 5 and using icloud my .mac account doesn't work with push anymore. I'am using two other mail accounts with push function and they work fine. I have heard from other users havong same problem, but does anybody have a solution to this? I have deleted the account and set it up again, worked for one test mail and then failed onwards..

Since upgrading to IOS 5 and using icloud my .mac account doesn't work with push anymore. I'am using two other mail accounts with push function and they work fine. I have heard from other users havong same problem, but does anybody have a solution to this? I have deleted the account and set it up again, worked for one test mail and then failed onwards..

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Firefox command line option "-no-remote" doesn't work with profile.

I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
Please find below the command what I am using
firefox -P "stripped" -no-remote
firefox
If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
I use the -no-remote with firefox default than it works for the first time.
I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
firefox -P "stripped"
firefox -no-remote
(But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
Do you have any idea why this is happening?

Horizontal scrolling doesn't work with ItemsStackPanel in ListView(GridView)

Hi,
In Win 8.1 App Store Project I have a ListView with fixed width and listen for ContainerContentChanging event because of performance issues.
When ListView width is less than content width, horizontal scrolling doesn't work. If we change ItemsStackPanel to VirtualizingStackPanel, horizontal scrolling works fine. But ContainerContentChanging doesn't work with VirtualizingStackPanel.
Is it possible to make horizontal scrolling work with ItemsStackPanel?
Here simple example to reproduce this problem:
<Page
x:Class="App8.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:App8"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d">
<Page.Resources>
<DataTemplate x:Key="ContinuousViewItemTemplate">
<Border Width="800"
Background="Green"
Margin="10"
Padding="5">
<Border x:Name="root" Height="800" Background="{Binding}"/>
</Border>
</DataTemplate>
<Style x:Key="ListViewStyle1" TargetType="ListView">
<Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Visible"/>
<Setter Property="ScrollViewer.HorizontalScrollMode" Value="Enabled"/>
<Setter Property="ItemTemplate" Value="{StaticResource ContinuousViewItemTemplate}"/>
</Style>
</Page.Resources>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="100"/>
<ColumnDefinition Width="500"/>
<ColumnDefinition/>
<ColumnDefinition Width="500"/>
<ColumnDefinition Width="100"/>
</Grid.ColumnDefinitions>
<ListView Style="{StaticResource ListViewStyle1}" Grid.Column="1">
<SolidColorBrush Color="Red"/>
<SolidColorBrush Color="Cyan"/>
</ListView>
<ListView Style="{StaticResource ListViewStyle1}" Grid.Column="3">
<ListView.ItemsPanel>
<ItemsPanelTemplate>
<VirtualizingStackPanel/>
</ItemsPanelTemplate>
</ListView.ItemsPanel>
<SolidColorBrush Color="Red"/>
<SolidColorBrush Color="Cyan"/>
</ListView>
</Grid>
</Page>

Hi Mikhail Maksyuta,
Welcome back!
Yes, you are right! I have reproduced it on VS 2013 professional.
I will report it as bug, Thanks for your valuable suggestions!
If you have any other questions about this, please feel free let me know!
Thanks again!
Regards!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Why EL doesn't work with custom tags ?!

I don't know why expression lang. doesn't work with me.
here's an example, and please tell me why :
--- the jsp page with EL ==> doesn't work :
<%-- In the name of ALLAH most gacious most merciful --%>
<%@ page language="java" %>
<%@ taglib uri="/cartlib" prefix="cart" %>
<html>
<jsp:useBean id="product" class="ch16.cart.ProductCatalog" scope="application" />
<cart:showCatalog productCatalog="${product}" addToShoppingCartUri="<%= response.encodeURL("AddToShoppingCart.jsp") %>" />
</html>
when using expressions instead, the page works .
the new page is :
<%-- In the name of ALLAH most gacious most merciful --%>
<%@ page language="java" %>
<%@ taglib uri="/cartlib" prefix="cart" %>
<html>
<jsp:useBean id="product" class="ch16.cart.ProductCatalog" scope="application" />
<cart:showCatalog productCatalog="<%= product %>"
addToShoppingCartUri="<%=
response.encodeURL("AddToShoppingCart.jsp") %>" />
</html>
The error was :
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: jsp.error.beans.property.conversion
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper
.java:512)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
org.apache.jasper.JasperException: jsp.error.beans.property.conversion
org.apache.jasper.runtime.JspRuntimeLibrary.getValueFromPropertyEditorManager(Js
pRuntimeLibrary.java:885)
org.apache.jsp.ShowProductCatalog_jsp._jspService(ShowProductCatalog_jsp.java:77
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.20 logs.

Regarding setup, see this post reply #6
http://forum.java.sun.com/thread.jspa?threadID=629437&tstart=0
Other potential things to check: make sure you are getting the right value passed in
productCatalog="${applicationScope.product}"
${product} by preference would take a pageContext, request or session attribute before the application level one (it uses pageContext.findAttribute).
What do you get if you just print out ${product} on the screen?
It should call a toString() on it for rendering purposes.

Filter doesn't work for filter-servlet name mapping

          Filter doesn't work for filter-servlet name mapping.
          it only works for filtering url-pattern.
          Does anybody has some idea?
          BTW, does anybody know if filter will be invoked when
          call RequestDispatcher.include/forward?
          Version: WLS6.1 SP1 on solaris.
          Thanks a lot.
          Heng


The Filter defined will only be run in the context that it is defined in. Since you are creating a new context, you will have to assign a new Filter. BTW, why not include the static content in the WAR with the dynamic stuff?

HttpServletRequest.isRequestedSessionIdValid() doesn't work with SSL

In OC4J 9.0.3, when SSL is enabled, the call to
HttpServletRequest.isRequestedSessionIdValid() method doesn't seem to work. It always returns false when it is called even though the session has not yet expired.
On the contrary, when SSL is disabled, the HttpServletRequest.isRequestedSessionIdValid() works correctly as specified in the servlet specification.
Can anyone in this forum explain to me why HttpServletRequest.isRequestedSessionIdValid() doesn't work with SSL? Any solution for that problem?
Thanks in advance.

Hi Sanjit,
I've tried this on multiple PCs and get the same problem everywhere.
See picture with IE11 and chrome.
Sincerely,
Davy

jsp:setProperty doesn't work with short properties

Hi,
          Setting bean properties doesn't work with properties that are of type short.
          Any ideas what's going on? I'm using WLS 6.1SP1 on W2K.
          --John
          <jsp:useBean id="test" scope="session" class="test.Test" />
          <jsp:setProperty name="test" property="*" />
          -- Test.java
          package test;
          * @author john
          public class Test {
          /** Creates new Test */
          public Test() {
          public short getShort() {
          return 0;
          public void setShort(short val) {
          Produces the following error while attempting to compile the jsp:
          Compilation of
          'C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp
          warCleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java'
          failed:
          C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp_
          war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java:104:
          setShort(short) in test.Test cannot be applied to ()
          probably occurred due to an error in /test.jsp line 7:
          <jsp:setProperty name="test" property="*" />
          C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp_
          war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java uses or
          overrides a deprecated API.
          Full compiler error(s):
          C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp_
          war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java:104:
          setShort(short) in test.Test cannot be applied to (<null>)
          test.setShort(null); //[ /test.jsp; Line: 7]
          ^
          Note:
          C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp_
          war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java uses or
          overrides a deprecated API.
          Note: Recompile with -deprecation for details.
          1 error
          Fri Nov 09 00:24:58 PST 2001
          [test.war]


It looks like a bug in JSP generator. If you look and the .java
          created by 6.1 it doesn't make any sence:
          String _propertyValue = request.getParameter("short");
          if (_propertyValue != null && !_propertyValue.equals(""))
          test.setShort(null);
          (needless to say that this works correctly in Resin).
          John Hampton <[email protected]> wrote:
          > Thanks for reply,
          > Changing getShort and setShort to getId and setId makes no difference. I
          > still get the error described below:
          > C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp_
          > war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java:104:
          > setId(short) in test.Test cannot be applied to (<null>)
          > test.setId(null); //[ /test.jsp; Line: 7]
          > John
          > "Jignesh" <[email protected]> wrote in message
          > news:[email protected]...
          >>
          >> hi,
          >> i think you have not given the property name properly.
          >> give some other name than short becuase short is the keyword (data-type)in
          > java.
          >> bye,
          >> Jignesh
          >>
          >>
          >> "John Hampton" <[email protected]> wrote:
          >> >Hi,
          >> >
          >> >Setting bean properties doesn't work with properties that are of type
          >> >short.
          >> >Any ideas what's going on? I'm using WLS 6.1SP1 on W2K.
          >> >
          >> >--John
          >> >
          >> ><jsp:useBean id="test" scope="session" class="test.Test" />
          >> ><jsp:setProperty name="test" property="*" />
          >> >
          >> >-- Test.java
          >> >package test;
          >> >
          >> >/**
          >> > *
          >> > * @author john
          >> > */
          >> >public class Test {
          >> >
          >> > /** Creates new Test */
          >> > public Test() {
          >> > }
          >> >
          >> > public short getShort() {
          >> > return 0;
          >> > }
          >> >
          >> > public void setShort(short val) {
          >> > }
          >> >}
          >> >
          >> >Produces the following error while attempting to compile the jsp:
          >> >
          >> >Compilation of
          >>
          >>'C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tm
          > p
          >> >warCleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java'
          >> >failed:
          >>
          >>---------------------------------------------------------------------------
          > -
          >> >----
          >>
          >>C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp
          > _
          >> >war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java:104:
          >> >setShort(short) in test.Test cannot be applied to ()
          >> >probably occurred due to an error in /test.jsp line 7:
          >> ><jsp:setProperty name="test" property="*" />
          >> >
          >>
          >>C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp
          > _
          >> >war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java
          >> >uses or
          >> >overrides a deprecated API.
          >> >
          >>
          >>---------------------------------------------------------------------------
          > -
          >> >----
          >> >Full compiler error(s):
          >>
          >>C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp
          > _
          >> >war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java:104:
          >> >setShort(short) in test.Test cannot be applied to (<null>)
          >> > test.setShort(null); //[ /test.jsp; Line: 7]
          >> > ^
          >> >Note:
          >>
          >>C:\bea\wlserver6.1\config\cleanoffer\applications\.wlnotdelete\WEB-INF\_tmp
          > _
          >> >war_CleanOffer Server_CleanOffer Server_test\jsp_servlet\__test.java
          >> >uses or
          >> >overrides a deprecated API.
          >> >Note: Recompile with -deprecation for details.
          >> >1 error
          >> >
          >> >
          >>
          >>---------------------------------------------------------------------------
          > -
          >> >----
          >> >Fri Nov 09 00:24:58 PST 2001
          >> >
          >> >
          >> >
          >> >
          >> >begin 666 test.war
          >> >M4$L#!!0`" `(`,@`:2L````````````````4``0`345402U)3D8O34%.249%
          >> >M4U0N34;^R@``X^4"`%!+!PBLA:(4! ````(```!02P,$% `(``@`R !I*P``
          >> >M``````````````\```!714(M24Y&+W=E8BYX;6RE4DMOVS ,/L^ _P/GTP9,
          >> >M4NH=M@YIBC3I@ )M&G3IAIX*1V9B!;)D6'0>WY2GDT6# /FD&1WX,4V]?+
          >> >M4L,<:Z>LN4HN>"L!--+FRDRODN?1=_8UN>[$4?L]8W$$)]^/QL"P&6LEX5Y)
          >> >M- YA8,G_Q5$<C0H$:0VA(0=V`E0H!Q.E$;(:P37C&4H"LKZ 9Y3BZ.<F%?A0
          >> >M\"$T)=M2\I'#BVV@S%9@+$'C?0_JN)18$2@31]*6E5:9D0@+1<7:::O!H>O3
          >> >M5:M-LCT,7B6;9TIGXQ"4XJ@@JKX)L5@LN&L,]Y)B-]UCK:;*9!IZ-E\S!T@W
          >> >MF!G'(93OC"+EJWV<H[85UCNO'2^.=L0P_H.2M74K1UBZ3YXL.0QM37X#SAM4
          >> >M*T\J""XN+[^PM-5J!4X<G2%UM8:GT.O@"1W6<\QY'#'6";'#2_8?>Z.7X2TL
          >> >M<,RRJMH\Z_#YYOZN!PD3XGP8(?JC/OS",70KOU29A620\E2(VT&R$4FVRYKY
          >> >M%>ZW-4L114ZY$UO#U_0UY1Y(UHG:6[2SD6@[=.'5F3^=B9IV#D>WKY JT3;4
          >> >M.;['SZTWK>)\[P$_4O<1M$^*+-P/T\J%_G='Z(F9,CDN^<Q5;SU/^O]!H*!2
          >> >M_[?"7P3^!'?3M<5A[;\!4$L'"/]33>'A`0``! 0``%!+`P04``@`" #(`&DK
          >> >M````````````````" ```'1E<W0N:G-P-4X[#L(P#-US"A.I"P/>D1LAQ,14
          >> >MB5X@M!84M4E4&XG>GJ:!R<_OIT?5*?D'0Q>#<M!V25Q;Y8_B4Z?15LY0!OFP
          >> >M[QWIH".[ZZV!9HT1EI]P4PW=8[\X8^@EZ?@6/K,/,/2Y4=2"=#'7"XL,,5CH
          >> >M1B]2Q$.[.="5K+ V\VJ>=8'@)_XW0/JQM=T7=W+F$@/O=H9PQ81E`F&9_050
          >> >M2P<(E)0WZYL```#@````4$L#!!0`" `(`,@`:2L````````````````?````
          >> >M5T5"+4E.1B]C;&%S<V5S+W1E<W0O5&5S="YC;&%S<TV/OT[#,!#&OTO2IDT+
          >> >M_4.I6-D*`C(@)A +$E,$0ZKN3K!:5R&1$K=/Q<*$Q, #\%"(LQ-%]7!W_MU]
          >> >MW]F_?]\_<'&-><#IQ,?,QRFA^Z!RI1\)[N)B1?">BC=)&$4JER^[]T262Y%D
          >> >M3*91D8IL)4IE[@WT]$95A$&D9:7#)8=[0F\M=;PI2FT]8P95"[Q%;+:X>Y$1
          >> >MB'M!7.S*5#XK8]<W#C=;L1=#>.@P:'T)8\/#3.3K\#79RE3C' [_Q!P79 0<
          >> >MNWR[Y4R<.Y=?H$\N'/@<`\[ F <GZ'$UK(?0YPZX'EAB#*X:`\?]:-5=2V8'
          >> >M2J=5'N&X4=Y9CL.UM?#,"N=ULQ&::L0/,LLF=G[Z#U!+!PA>>AD-#@$``*4!
          >> >M``!02P$"% `4``@`" #(`&DKK(6B% 0````"````% `$````````````````
          >> >M````345402U)3D8O34%.249%4U0N34;^R@``4$L!`A0`% `(``@`R !I*_]3
          >> >M3>'A`0``! 0```\`````````````````2@```%=%0BU)3D8O=V5B+GAM;%!+
          >> >M`0(4`!0`" `(`,@`:2N4E#?KFP```. ````(`````````````````&@"``!T
          >> >M97-T+FIS<%!+`0(4`!0`" `(`,@`:2M>>AD-#@$``*4!```?````````````
          >> >M`````#D#``!714(M24Y&+V-L87-S97,O=&5S="]497-T+F-L87-S4$L%!@``
          >> >0```$``0`!@$``)0$````````
          >> >`
          >> >end
          >> >
          >>
          Dimitri

X-Fi 2 doesn't work with BBC iPlayer

My X-Fi 2 doesn't work with BBC iPlayer content.
I've no idea whether it should or not, - but just for info as some people will be wanting to know.
I can load the files by dragging and via Centrale without error messages, but it just won't play the .wmv files (which work on the X-Fi ).
Firmware .0.0

JohnZS wrote:
I might be wrong, and if I am wrong then could someone correct me, but as far as I knew, Creative Cards do not support Windows Server 2003. I maybe wrong, have you tried the latest BETA driver (see exciting news thread)John
In windows 2003, the driver works if I limit the total ram to 4096MB by adding /Maxmem=4096 in boot.ini file.
FYI
/maxmem
The /maxmem parameter limits the physical memory available to Windows.
/maxmem=SizeInMB
Subparameter
SizeInMB
Specifies the maximum amount of physical memory available to Windows. Enter a decimal number that represents the amount of memory in megabytes.
Comments
This parameter actually limits Windows to memory addresses less than or equal to the specified value. Because some memory within the remaining address space might be reserved for nonsystem use, the actual memory available to Windows might be less than the amount that you specify.
The /maxmem parameter is supported only on Windows Server 2003, Windows XP, and Windows 2000. On Windows Server 2003 and Windows XP, use /burnmemory to limit system memory more precisely. On Windows Vista and later versions of Windows, use the removememory or truncatememory parameters with the BCDEdit /set command
You can use this parameter to test a driver in low memory conditions. For example, you can use this parameter to limit a computer with GB of memory to 256 MB of memory.

Doesn't work with a servlet other than ActionServlet

Similar Messages

Maybe you are looking for