Doesn't working SD card slot

i bought Macbook pro with retina few days ago
I was checking SD card slot but doesn't working it....
how can i do...
when I try to SD card put in Macbook there is no reaction
I try to reset OS and pram, SMC already

Have you tried more than one SD card? It may be that the one you have is defective...
If no SD cards will mount, take your machine back to the seller - you have up to 14 days to exchange your machine for another or get a full refund.
Clinton

Similar Messages

Built in Airport Card on iMac Doesn't Work (The card came with my iMac)

I have an iMac Intel White. The Airport Card that came with it was working since I got the machine, but now it suddenly stopped working... When I click on it, it says Airport: Not Configured. Hmm, strange. Guess what, nothing with Airport works. There recently was a power outage, but I have the Mac on a UPS.
What is going on? More importantly, HOW DO I FIX THIS??
I am using Ethernet right now. It's not a problem; the real problem is that I cannot do Internet Sharing over the air!

Oops, made a mistake. Sorry. I'll post this in the correct iMac category.

Satellite 1900-803: Hi-Speed USB 2.0 card doesn't work

i have a satellite 1900-803 laptop. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card but it doesn't work. the card's manual says that after successful installation i should see a second "universal serial bus controllers" heading which i didn't. i even had it replaced it with another one thinking that there might be some problems with the drivers, but it still doesn't work. everytime i plug in a device such as an mp3 player, a digital camera or a usb storage device, windows just suddenly locks itself up, the cursor won't move, the ctrl-alt-del function doesn't work, and the worst of all, i can't turn off the machine!
the card says that it runs on any 32-bit slot.
i've browsed the user's manual and the device manager to see if mine is a 32-bit one, but i can't really find it. is this probably the reason why it won't work? or is there any other reason for it not working? if this is the reason, is there a way where i can upgrade my laptop's pc card slot to make it work?
please help.
i've posted this question yesterday morning and haven't got a single reply. is it because it has got to do with an older laptop? please, anybody, help..........
Message was edited by: wes0702

Hi
Did you check the Bios? I assume the Toshiba Bios was preinstalled on your notebook. Am I right? There should be an option for changing the PC card controller mode.
There you can change the controller mode to auto-selected, PCIC compatible or Card bus/16-bit.
If the card supports 32 bit so you shouldnt use the 16bit option.
I think you should play a little bit with this option and possibly the card will work.

When did imac ship with media card slot?

it's pretty stupid that i just noticed but my imac doesn't have sd card slot. i wouldn't even have noticed but read something today that apple started shipping in september. is this true? recommendations for good quality external reader? i purchased the imac in december of 2009.
Message was edited by: Robert Wilkins2

The SD readers are built in when the iMacs were updated with 21.5" or 27" displays.
As for a card reader, there pretty simple devices, I bought a cheap USB one off eBay for about £1, it works fine. Quite compact as it's not a box but looks similar to a chunky USB memory stick which you slide your SD card into the end of.

P20-552: 2GB SD card doesn't work.

I have a P20-552 (PSP26E-025E9-S4) which is about 18 months old. I recently bought a Canon digital camera (IxUS 750) with a 2GB Sandisk Ultra II SD card and the combination is working well. Although I can transfer images from the camera to my Toshiba portable using an USB cable, sometimes I would like to use the SD slot on the portable but there seems to be a problem: seconds after pressing home the SD card in the slot I get the message "Disk is not formatted - Do you want to format it now?". I reply OK but then I get the message "The disk in drive E cannot be formatted"
The card continues to work perfectly well in both my camera and in my iPaq PocketPC. The SD card slot in the Toshiba will work quite happily with the Sandisk 256MB SD card that is usually in my PDA.
Anybody has any idea why the 2GB card doesn't work in the Toshiba? Is it a question of updating a driver - I did look the other day but I couldn't find anything that to me seemed appropriate but I might well have overlooked something..
I am running XP Home (SP2) and have fully automatic updates ON. I have Norton Virus and Zone Alarm running and am not experiencing any problems with any other software/applications - at least, no problem since someone suggested vacuuming my overheating laptop a few weeks ago ;-)
Thanks, Brian.

It seems that the unit doesnt support this card.
Check your user manual. There you will find a information that this unit supports only the following SD card sizes: 8/16/32/64/128/256 and 512 MB
According to this document the 2 GB are to high.

KA780G second network card doesn't work

Hi everybody,
Today, I put an second network card on the KA780G board (it's for a round robin network), on a free PCI slot, and this card isn't recognised by Linux and Windows (in Windows XP, when the network card is connected, my graphical card works bad as well).
I tested this network card in another computer and it's working well, I try with another type of network card and it's not working.
I upgraded the BIOS with the latest release and reset the bios parameters but it doesn't work.
Do I need to put some specifics parameters in the BIOS ?
Someone as an idea ?
Thanks
Matt

As you want... but I know the truth
Transfert a file takes me twice the time when the second network card was unpluged (the test was made with two differents files with the same size, this is for keeping disk caching speeding the transfert).
I think, your're not understanding, so let me explain the achitecture of my network : two computers pluged to my "super magic switch" (each with one network card) and my NAS with two round robin's network card.
I transfert one file from the NAS to the first computer and at the same time another file from the NAS to the second computer. The network speed was (on the NAS) about 24MB/s (see with the system monitor).
If you're right explain me why many people using port trunking with their switches ?
Matt.

MacPro eSata Port/Card doesn't work with new Hard Disk

I just bought 4 x 3TB Hard Disc http://tinyurl.com/d2rglvn (specs of disc)
Which I put in Macally Enclosures to work on my Barracuda internal Hard Drive externally http://tinyurl.com/clg8yjo
I already have like 5 x 1,5 TB that works perfectly well with eSata connections (with exact same enclosures)
**My problem is that my 4 new Hard Discs works really fine with my Mac Pro but only with the USB connections but won't work with the eSata Connection. I tried it on a MacBook Pro with an ATA to eSata adaptor and it works perfectly fine (So my discs are not the problem) **
I am working on a Mac Pro (bought in 2007) - Mac OSX 10,6,8 and this is (I think) the card where I put the eSata :
PCI Card :
pci1095,3132:
Type:    Other Mass Storage Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x1095
Device ID:    0x3132
Subsystem Vendor ID:    0x1095
Subsystem ID:    0x3132
Revision ID:    0x0001
Link Width:    x1
Link Speed:    2.5 GT/s
I am kind of new using Mac and its support so what want to know is :
Do I need to update my PCI Card ? If yes how can I do that ?
If not, what can I do to make my disc work ?
My disks are eSata III (6GB/s) is it compatible with my Mac Pro ?
Thank you Very Much for your time

Difference between the disk that works in eSata and those that doesnt is this....
Works : ** 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5"
Doesn't Work : **3TB, SATA III (6Gb/s), 3.5", 7200RPM, 64MB
it is probably the problem but i don't know what to do to fix it !

Sd card slot not working. HELP

hi I have had my macbook pro 13'3 for 5 months
just now I have tried to put my SD card in the SD slot and it goes in lopsided and doesn't read
do i take it to the genius bar or what?
also it is hard to fit in and it has had some more problems like a dead pixel which I haven't got fixed yet and it doesn't go to sleep properly (and i'm not an uncareful person it has never been droped or any thing.)
really need an answer on this guy's
Ben.

I purchased an iMac Friday July 27. I think I may have a solution that worked for me but requires a delicate touch and good eyesight. What the issue was the first time I insert a SD card it would read it no problem. Then when I ejected to insert another, it would not mount unluss I restarted the iMAc with the card inserted.
In searching the forums I found one user said it is a microswitch contact n the iMacs internal SD card that detects a card is present.
The remedy is to work this switch a bit. If you look inside the SD card slot on the side of the iMac, you will see a variety of contacts that engage the SD card's contacts. But on the very top in the back is a small metal contact that lines up with the 45 degree angled edge of the SD card.
So by using a tooth pick or another non-conductive piece, VERY GENTLY work this switch in and out. First couple times I did it, it would reset the switch, but card would remount again on the second try. But as I did it more it finally started working.
The other thing I did was shut down the computer, unplugged it from the wall for at least 15 seconds. plugged it back in and waited 5 more seconds.
Then on start up I reset the PRAM. By once you hit the power button, immediately hold option(alt)+command+P+R all at the same time. Keep them held down until you hear the second chime. Was told reseting the PRAM resets the hardware memory that sometimes can become corrupt. Can't say for sure this helped, but right out of the box I installed new RAM into my iMac. So it's possible something got screwed up in the process.
But I think massaging thecontact did the trick.
It's not hard, but be carefull to damage or overly bend the contact. Take it in if you feel uncomfortable doing this.

I bought a MSI Z77A-G43 and 1st PCIE(3.0 I guess) slot doesn't work?

I bought a MSI Z77A-G43 and 1st PCIE (3.0 I guess) slot doesn't work? I mean when I put my gf card in it , my screen wont start. BUt when I put it to other blue Pcie (2.0 I guess) it works. What will be the reason? Do I need to do anything in bios ?

I had a similar situation recently.
1.) Check the cpu/ socket for damage
2.) Remove the mobo and make sure there are no extra stand off's under the board.
3.) Check the pci/e slot for obstruciton or debris
Other than that it's probably going to be an rma issue.

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

I'm trying to pay an app and my acount doesn't work with my payment method (credit card)

Last december I bought the iDraw app for iPad and the charge of my credit card doesn't work, my credit card is ok, but my iTunes account don't let put another type of credit card to do the payment for the app.
Please help me because I can't download any app or update them.
Thanks

DELETING APPS
Touch the app and hold your finger down until all the apps start to jiggle. You will see a circled "x" in the upper left corner. Tap it to delete an app. When done press the Home button.
You cannot delete any pre-installed iOS app.
If there is No 'X' on any apps you have Downloaded... then check in Restrictions... Settings > General > Restrictions > Deleting Apps = Off / On
If the app is in iTunes, then you delete the app in iTunes (Select the App and Press Delete on your Keyboard). If you then sync with your iDevice, the app will also be deleted from your iDevice.

Can't Add Credit Card (submit button doesn't work)

Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization.
The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do anything. It doesn't change to being clickable at any time.
If it helps, I have the Palm Pre, I'm with O2 (UK).
Can anyone help?
Post relates to: Pre p100ueu (O2)

This sounds like a credit card related issue. Has anything about your credit card changed, like a new expiration data? You can go to App Catalog, tap the drop-down menu, select Preferences and Accounts, then choose the account name, enter your profile password, tap continue, When the Edit Credit Card screen appears, re-enter the credit card number and confirm that the remaining info is valid or enter any new information, then submit.

ICloud is messing with my phone and now iStore says my card doesn't work.

Okay. Where do I begin. I feel like a crazy person, Anyway.
So all of this started when I got my MacBook Pro. I had just got a new e-mail so of course I want to update my iCloud account with the new e-mail and a new password. Seems easy enough but NO, it's been a nightmare.
1. I can't update, delete or do anything with the iCloud setting in my phone, which is still registered to the old e-mail. It keeps asking for the old password and it does not make sense because it has been disabled. Help me god.
2. I can't update or do anything in the App/iTunes Store because it keeps asking for verification, which leads to my card info (was already saved) but now all I get is it has either been declined or is not a valid payment option etc etc etc.
3. Same thing as number 2 happened on my iTunes Store on my macbook.
And that's it. My phone is having a meltdown because he's stuck in some sort of non-existant iCloud account twilight zone. I've tried everything and nothing seems to work, I get nothing from the apple support (thanks Apple! Great customer care by the way!) and no one around me seems to know what to do or what the deal is.
I'm just a simple human being that gets very frustrated when technology doesn't work.
So if anyone out there is really smart and can figure this out and tell me step by step what to do before I set my phone on fire, please help me!
I'd really appreciate it. Thanks!

Does your phone charge without issues when using the Apple supplied charger?
If it does, the issue is with the Mophie.
If it does not, the issue may be with the iPhone or may simply be a dirty dock connector.

IPhone 5 sim card doesn't work

Hi,
One day the SIM card in IPhone 5 just stopped working. I can see the network on the desktop and in general settings, but it does not work for real. I can't make a call, send a message or get internet. Sometimes it goes "No service", "Searching" but then goes back.
I have checked this SIM card with different phone - it works properly good. Any different SIM card in my IPhone also doesn't work.
So I went to the Apple Store (Indonesia, Denpasar, Bali) they said you need to reset all the content and settings. So I did all and nothing happened.
Again SIM doesn't work - same situation. What is interesting sometimes I'm getting messages from the network so it seems that SIM card works some time but I can not make any calls or actions with SIM.
In the App Store guys told me this might be a hardware problem which could not be solved it's just broken.
They say you can exchange an IPhone for the new one but not in Bali because they don't have IPhone 5 anymore. Is it fair?
Please help me what can I do and how can I make my IPhone works or exchanged it for a new one.
I will be in Malaysia, Kuala Lumpur on February 7th. Can I exchange my IPhone here?
Version 7.1.1 (11D201)
was bought in USA 2,5 years ago
I live in Bali, Indonesia
Thank you in advance for any help.
Best regards,
Yulia

Thank you. I bought IPhone in USA 2 years ago.
"The iPhone warranty is not international" - it's very sad. Just wondering why people in the Store told me different things.

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

Doesn't working SD card slot

Similar Messages

Maybe you are looking for