DOFD on my fixing report?

Thank you

It is common for most types of commercial credit reports to omit the DOFD.That is apparently based on their assumption that consumers are not saavy and have no clue what a DOFD is.Some will substitute by giving an expected exclusion date for a collection.  An estimated or expected exclusion date provided in a credit report is usually provided based on DOFD plus 7 years, which is when the CRAs normally do their exclusion. If you have not obtained your free anuual report from annualcreditreport.com within the last 12 months, get a copy there.  It may include the DOFD. You can always, if you have good OC account records, go back and determine the DOFD based on those records.  That will also give you some basis, if you obtain the reported DOFD, to evaluate whether it is accurate.

Similar Messages

  • Please help apps. Crashing on 64 gb 4 gen touch. Run 5.0.1 I know the temp fix of logging in but want to fix report shows "low mmemory crash" which is not true

    Please help apps. Crashing on 64 gb 4 gen touch. Run 5.0.1 I know the temp fix of logging in but want to fix report shows "low mmemory crash" which is not true

    Why do you say "not true"? The 4G iPod only has 256 MB of memory and out of memoty errors are not uncommon with iOS 5.
    memory is different that the 8, 32 ir 64 GB or storage on the 4G iPods.
    To resolve double click the Home button and delete the apps from the mulitasking dock that you are not using and the power off and back on the iPod. You have to do that periodically.

  • How can I fix report width?

    How can I fix report width? I have 10-15 columns in the report and when I show report it goes outside the screen,how can I show this optimally to the users?

    Hi,
    You can specify the Width of the Section (where you are displaying the Report) to show the report within that area.
    Navigation: Page Options ==> Edit Dashboard ==>Section Properties ==> Format Section ==> Additional Formatting Options ==>Width (say =200)
    -Vency

  • Fixed report period based on current date

    I want to create a report containing records over a fixed period without using a date parameter. As a example I would like the report to continually draw on data that is no more than say ten years from the current date.
    E.g. Current date (xx/xx/2008) to (Current date - 10 years) or xx/xx/1998 then next year the formula would automatically adjust to current date (xx/xx/2009) to (Current date - 10 years) or xx/xx/1999.
    I am only a novice when it comes to designing reports so please bear that in mind.

    Hi,
    Create a RecordSelectionFormula and subtract 10 years from the current date with the DateAdd formula.
    E.g.
    //DateAdd (intervalType, nIntervals, startDateTime)
    {Table.Date} > DateAdd ("yyyy", -10, CurrentDate)
    The DateAdd function has more interval types, so you can subtract months, days, hours as well. Check the CR help file and search for DateAdd for details.
    Cheers,
    Fritz

  • Fixed report header

    How can i fixed my report header,when i scroll my report page my heading always be fixed

    Syntax
    TOP-OF-PAGE [DURING LINE-SELECTION].
    Addition:
    ... DURING LINE-SELECTION
    Effect
    This statement defines an event block whose event is triggered by the ABAP runtime environment during the creation of a list. This occurs when a new page is started - that is, immediately before the first line in a new page is to be output. All list outputs that take place in the event block are placed below the standard page header of the list. You cannot output more lines than are available in the page within the event block. The NEW-PAGE statement is ignored within this event block.
    The entire output written to the list in the event block belongs to the page header of the current list page. The top page header cannot be moved when you scroll vertically in a list displayed on the screen.
    For each TOP-OF-PAGE event, the placeholders "&1" - "&9" are replaced with the contents of system fields sy-tvar0 - sy-tvar9 in the standard heading and the column headings of the standard page header during creation of a basic list. You can assign values to these system fields in the program.
    Addition
    ... DURING LINE-SELECTION
    Effect
    If you do not use an addition, an event block is triggered for event TOP-OF-PAGE during the creation of a basic list. If you use the addition DURING LINE-SELECTION, an event block is triggered for the corresponding events during the creation of details lists. You have to use system fields like sy-lsind to distinguish between the individual details lists.

  • Bug and Fix: Report Template Preview displays ORA-01002

    Hi, omniscient All!
    Let me share some knowledge with you. There is an old APEX bug:
    BUG: preview report template errors with ORA-01002
    Report Template Preview/Copy Error
    Template Preview Error:
    You can definitely see it in 4.0, 4.1, 4.2, 4.2.1 versions: open any database application in AppBuilder, go to Shared Components→Templates, move cursor on Some Report Template row, click Preview Icon. Voilà:
    report error:
    ORA-01002: fetch out of sequenceI looked into Template Preview region's source and have found next WWV_RENDER_REPORT3.show call:
    wwv_render_report3.show(
        p_query => '
    select 1 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 2 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 3 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 4 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 5 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 6 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual
    order by 1',
        p_row_template_id => :f4000_p245_id,
        p_region_id => 88449328191587806
      );I have no wish to go deep into my further investigation, therefore I just call a cause: APEX Team, you forgot to set the value of P_PLUG_SOURCE_TYPE parameter.
    Workaround: While APEX Team will making a patch, those who can't wait it should fix it manually by executing next code:
    update &APEX_SCHEMA.wwv_flow_page_plugs
       set plug_source = q'{wwv_render_report3.show(
        p_query => '
    select 1 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 2 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 3 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 4 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 5 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual union
    select 6 COL1, ''[...]'' COL2, ''[...]'' COL3, sysdate COL4 from dual
    order by 1',
        p_row_template_id => :f4000_p245_id,
        p_region_id => 88449328191587806,
        p_plug_source_type => 'SQL_QUERY'
    where id = 14562627207747006
    /APEX_SCHEMA is schema where APEX was installed.
    Good luck,
    Alex
    Edited by: tiPPLer on 14.02.2013 17:14

    I wouldn't mind piggy-backing this to ask if the Report Template "shortcut" links at the top of the page can be updated to account for all sections that are now a part of the Report Template. "Before Each Row" and "After Each Row" sections are not listed in the shortcuts. There are also two shortcuts listed as "Before" and "After" which should probably be relabeled.
    Shane.

  • Reusable fixed report base with some changing content

    Hello,
    After buying XI Pro i'm trying to improve my workflow.
    Say 100-200 times a year i make a pdf report which has the following fixed components:
    - page 1 summary (tekst, 1 photo, 3 small photo's)
    - page 2-3 text + table
    - page 3-4 maps
    - page 5-10 photo's (4 on a page)
    - page 11 text
    - page 12-15 optional
    - every page needs the same look: logo, background, borders, fonts etc.
    I use this report to printout of to publish it on my wesite.
    Every version of this report has different tekst, photo's, maps etc.
    I looked at Portfolio's but as far i can see it is for screen based presentations.
    How do i create a report to use for every new project and just drag en drop the new content in?

    Portfolio does the same i want for good looking screen presentations.
    I need a goodlooking presentation on paper.
    I read the instructions for editing using Acrobat on Adobe.com
    When editing is not advised, i will use Word for this purpose.
    Must say Acrobat then is quite expensive for the limited "toolbox" functionality for only scanning, ocr en converting pdf's.

  • How to create a report with dynamic no of columns

    Hi All,
    we have a report with 6 columns.
    and its been access by 10-20 people.
    the user dont want to have a fix report with 6 columns rather they want to have a flexibility to select the columns from the report they want to see.
    i.e. user one one time wasnt to see only one columns
    another time he want to see only column 2 and 4 of the report.
    its like there can be a multiple select option from where he can select the columns in the existing report and then see the same report with only that much column.
    Please tell me how to implement it.

    Abhip i thin you didnt get the problem.
    there is s exeiting report with 6 column
    Currently when i logging to OBIEE and see that report
    i will be getting report with 6 column
    but now i want a flexibility of selecting only 2 or 3 or 1 or 4 or 5 as i wish columns from this report and see the result only for that
    so is there by any chance i can have a check box for each column which i can check in dashborad to select that column
    and show the result were as by default it will show the report with 6 column.
    Thanks

  • How do you save a report from VB?

    Post Author: calvin
    CA Forum: .NET
    How do you save an updated Crystal Report (CRXI) from a VB.Net (2005) program?
    We're using the ReportDocument object model, not the CrystalViewer
    & it appears there's a SaveAs method but not Save.Worse, the SaveAs doesn't seem to work. I get a convoluted error message that essentially says the file is in use, even when I'm saving it to a new filename. (The file it's referring to is the copy of the original file in the Temp directory.) I can post a screen capture of the entire error message if anyone thinks it will be useful.
    Thanks.

    Post Author: calvin
    CA Forum: .NET
    "Curiouser and curiouser. said Alice." I feel like I'm in Wonderland-the SaveAs works for some reports, but not for others. The task is to create an application consisting of a VB.Net program and a set of reports. The reports must be able to be run 'stand-alone' in Crystal Reports XI, and also to be run under control of the VB program. The report output is to go to PDF, not to be viewed online. It's absolutely amazing, to me, how little support there is for this type of thing. Why? Possibly it's considered simple-and it seems like it should be, except that some reports won't run under control of the VB program. When I got involved there had been a database change so the problem initially appeared to be running the VerifyDatabase command. (The reports being tested ran fine after they'd been fixed up in Crystal-but this wasn't expected to be the last database change so there was still a need for a programmatic fixup.) After running the VerifyDatabase command in the VB program the 'fixed' report couldn't be saved to verify that the report had been fixed-and it still wouldn't run. Now, I'm leaning towards the idea that the database change was a red herring. We've found some reports that have been fixed up but still won't run. Mostly they just 'hang'. If we get any output at all (usually after killing the application) it's the same record reported over and over. Anybody got any ideas?

  • SQL Server reporting services error "URl has already been reserved" while doing upgrade from SQL server 2008 R2 to SQL server 2012

    "URl has already been reserved".
    Reporting services for port 80 and 443 works fine both for reports and reportingserver on SQL server 2008 R2. But when I try to upgrade from SQL server 2008 R2 to 2012 this error pops up. How to make sure before upgrading regarding reporting services that
    URL reserves and SSL are fine  or how to fix reporting services are upgrade like repair install.
    Thanks

    Hi yashmitl,
    In your case, please running the following command to check the current URL reservations on http.sys.
    netsh http show urlacl
    Then, please delete the URL reservation by executing the following command try to resolve the issue.
    netsh http delete urlacl <url>
    There is a similar issue, you can refer to it.
    http://social.technet.microsoft.com/Forums/en-US/d5204dd3-e26d-4592-8ef0-a94005fc46a5/the-url-has-already-been-reserved?forum=sqlreportingservices
    Hope this helps.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Install Form & Report 11.1.2.0.0 with Weblogic 10.3.5 64 bits == ERROR

    Hello, i try install Forms Report in a new windows 2008 R2 Server but send error.
    the steps are:
    Step 1. Install Windows server 2008 R2 Foundation 64x.
    Step 2. Download and Install JDK Jdk-6u31-windows-x64.exe.
    Step 3. Download and Install Weblogic 10.3.5 64 bits with java -Xmx1024m - jar wls1035_generic.jar
    Step 4. Don't execute quickstart.
    Step 5. Download and Install Forms & Report ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1, run Setup
    Step 6. select "Install and configure"
    Step 7. select "configure for deployment"
    Step 8. Create Domain
    Step 9. Select "Forms Builder" and "Reports Builder".
    Step 10. Automatic Port = yes
    Step 11. Proxy = no
    Step 12. OID = no
    Install = 100% OK
    Configuration --> ERROR in "Configuring OCM", next click "Continue"
    All next configuration are OK
    please someone can help me, your help is greatly appreciated
    Thank you very much
    Carlos

    Hi, Norbert
    Thank for your excellent help to the point.
    All work well.
    *1.- opmnctl status -l*
    H:\Oracle\Middleware\asinst_1\bin>opmnctl status -l
    Processes in Instance: asinst_1
    -----------------------------+------
    ias-component | process-type | pid | status |
    uid | memused | uptime | ports
    -----------------------------+------
    emagent_asinst_1 | EMAGENT | 5652 | Alive | 161
    0552159 | 13752 | 0:11:25 | N/A
    RptSvr_COBROTECH-SRV_asinst_1 | ReportsServerComp~ | 5820 | Alive | 161
    0552158 | 112664 | 0:11:41 | N/A
    ohs1 | OHS | 4588 | Alive | 161
    0552157 | 23252 | 0:13:15 | https:8889,https:8890,http:8888
    *2.- Java*
    H:\Oracle\Middleware\asinst_1\bin>java -version
    java version "1.6.0_26"
    Java(TM) SE Runtime Environment (build 1.6.0_26-b03)
    Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode)
    all other works fine
    the OraInstall2012-03-05-12xxx.err include:
    oracle.sysman.oii.oiit.OiitTargetLockNotAvailableException: OUI-10022: El área de destino C:\Program Files\Oracle\Inventory no se puede utilizar porque su estado no es válido.
         at oracle.sysman.oii.oiit.OiitTargetLocker.createLocksDir(OiitTargetLocker.java:1033)
         at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:207)
         at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:185)
         at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:172)
         at oracle.sysman.oii.oiic.OiicStandardInventorySession.acquireLocks(OiicStandardInventorySession.java:403)
         at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:301)
         at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
         at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
         at oracle.as.install.engine.modules.install.util.InstallUtils.createInventorySession(InstallUtils.java:443)
         at oracle.as.install.engine.modules.install.util.InstallUtils.setAdditionalOracleHomeProperty(InstallUtils.java:329)
         at oracle.as.install.classic.installaction.ClassicInstallAction.executeAfterCopy(ClassicInstallAction.java:250)
         at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteAfterCopy(InstallActionProviderUtility.java:93)
         at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.executeEvent(ModifiedDWizard.java:2948)
         at oracle.as.install.engine.modules.presentation.PresentationModule.processModuleEvent(PresentationModule.java:655)
         at oracle.as.install.engine.modules.util.PartnerModuleImpl.processEvent(PartnerModuleImpl.java:118)
         at oracle.as.install.engine.InstallEngine.notifyListeners(InstallEngine.java:626)
         at oracle.as.install.engine.InstallEngine.processEvent(InstallEngine.java:584)
         at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyAllEventListenersHelper(PartnerModuleImpl.java:227)
         at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyListeners(PartnerModuleImpl.java:158)
         at oracle.as.install.engine.modules.install.InstallModule.onSuccess(InstallModule.java:478)
         at oracle.as.install.engine.modules.install.action.InstallManager.notifySuccess(InstallManager.java:322)
         at oracle.as.install.engine.modules.install.command.InstallSuccessCommand.execute(InstallSuccessCommand.java:42)
         at oracle.as.install.engine.modules.install.action.InstallManager.onInstallEvent(InstallManager.java:334)
         at oracle.as.install.engine.modules.install.action.AbstractOUIHandler.fireInstallEvent(AbstractOUIHandler.java:147)
         at oracle.as.install.engine.modules.install.action.OUIInstaller.succeed(OUIInstaller.java:542)
         at oracle.as.install.engine.modules.install.action.OUIInstaller.start(OUIInstaller.java:480)
         at oracle.as.install.engine.modules.install.action.InstallManager.launchOUI(InstallManager.java:212)
         at oracle.as.install.engine.modules.install.InstallModule.launchOUI(InstallModule.java:155)
         at oracle.as.install.engine.modules.install.InstallModule$1.run(InstallModule.java:246)
    Form and Report Builder.
    in H:\Oracle\Middleware\Oracle_FRHome1\bin
    frmbld , start and load example form ok
    rwbiulder send "REP-50125: rwbuilder.conf:java.lang.NullPointerException"
    have any idea how fix report builder error?
    Thank you very much for your invaluable help.
    Carlos

  • Can you please help me fix a crackling/distortion problem that i have with AA when recording?

    I've read before on the forum that some other users have the same problem and I've tried quite about everything to fix my problem as well, but still no result.
    When I record, be it in AA 1 or in AA 3, i sometimes end up with channels being distorted (randomly!).
    Here's my config:
    I think it's important to say that I've been having this problem starting only a few months ago, though I haven't reinstalled Windows or anything. I'm working with windows XP SP3. I think (though i'm not sure) the problem occured about the same time I've updated my M-Audio drivers to version 5074. I've also tried disabling C1E as I've read on this forum on another topic and no result.
    Also,
    here's a sample of the crackling:
    http://dl.transfer.ro/transfer_ro-26jun-168e94ae4dc5d9.zip
    I'll send a bottle of Jack to whoever helps me fix this one Really now, I'm desperate!

    I don't hear crackling in that sample, myself, just a split-second rant in another language I can't identify, but anyhoo...
    1. Have you tried rolling back to the 5069 driver?
    http://www.m-audio.com/index.php?do=support.drivers&f=930
    2. Check out this thread:
    http://forums.m-audio.com/showthread.php?17641-**Official-Info-Delta-Series-Driver**-Updat ed-5-26&s=e3e523dd417e4335c48234bac735fa59
    I see you're having your issue in WinXP SP3.  One guy (see post 43 on page 5) reports it in Win 7 with this driver.  People have reported better success with the 5069 driver but that one has been reported to lock on shutdown in Win7.
    3. Check out this thread:
    http://forum.cakewalk.com/tm.aspx?high=&m=1998799&mpage=1#1998799
    Same driver, Win7, different M-Audio card, different sound program, but crackling/sizzling. Fix reported by OP in post 14 by adjusting BIOS settings:
    Disabling EIST (Enhanced Intel Speedstep Technology) and CPU C state in  the power section of the BIOS made all the crackle sizzle go away!
    There's a checkmark in the last window in your screenshots for that one.  Also discussion of suggestions to adjust latency, etc., in soundcard which didn't fix it for him but may have for others.
    If those give no joy, please post motherboard brand and model.
    Message was edited by: Mel Davis.  Addition to suggestion #3.

  • ADOBE PLEASE FIX THIS SOFTWARE

    I was considering purchasing this software but it is so buggy I cannot begin to express my frustration. Are we beta testers ? Why can't these issues get resolved. I have had the dreadful 0x0000020 error for 3 different projects now during the past day and no i did not uncheck and check "animate buttons". This is a real pain. The solution is to rebuild the dvd every time? How is this software aimed at professionals wanting to create dvds in a business environment. These constant crashes due to this error are unacceptable. What would I say to a client sitting with me waiting for their project to burn? Sorry I have to redo everything please wait? To say that this is an OS problem and alleviate responsibility is not the right thing. I love the idea that this software works with photoshop, I like how it works when it does but authoring dvds in this buggy environment is REAL FRUSTRATING

    I'm also extremely frustrated with Encore. It cost me months of unpaid time. It is definetely the buggiest piece of the CS suite and it didn't get any better through all it's versions.
    I have been talking to support many times and I got a sack full of bugs confirmed, some of them major bugs that even corrupt files (some weren't fixed for three or four versions.)
    Each software has bugs, but teh main problem in Encore is that it just doesn't handle user or internal errors gracefully. It just crashes or hangs. There is no recovery mode or something similar. I definetley can't recommend it if you have to make a living out of it. The chances that you loose a lot of time and money are very high even if you do everything correctly. You might just edit a menu and Encore crashes and corrupts the file - making you have to redo the whole project from scratch.
    After I will have finished my current projects, which are already three months delayed, because of Encore bugs I will finally dump Encore and either spend much more money for professional authoring software or might go for Studio Pro on the MAC that I tried recently and had a much better experience with.
    The first problem for us customers is that there is no real competitor for the PC. (On the MAC Studio Pro is by length better in stability and features.) So Adobe has no real need to put more effort into Encore.
    The second problem is that software is treated differently than any other product. A car manufacture has to face product liability. A software manufacture does not. It must become cheaper for software manufacture to make better software and not the other way around as it is today. I would recommend a law that requires a software vendor to fix reported bugs (behaviour that differs from the specs in the manual) for free in a certain time frame (e.g. 6 weeks) or the customer can deduct a certain amount from the purchased price. If a advertised piece of a programm is not working you should not pay for it. Period. This would make it cheaper for the vendor to develop better software right away. Nowadays all major software vendors use the 5% rule. If a bug is not reported by more than 5% of the user base it won't be fixed. It doesn't matter if the bug is serious or you can't use a feature. (I never forget the nught shifts because Encore corrupted projects when you tried to enter subtitles manually). Nowadays a bug might be fixed in the next version, which the customer has to pay again, even he paid already for a version that should have done it correctly.
    Some people say that software becomes so expensive that you can't afford it anymore. I don't think so. Anyway it think it would be better to knwo what you are getting into it and get a piece of software for a couple of hundred dollars and then loose a couple of thousands, because it doesn't work.
    I really can understand the frustration of many users that pay real money for Encore and then don't get the value for their money that has been advertised and they expect.

  • What browser rendering issues do you need fixed?

    Reporting Services is looking to fix report rendering issues customers are seeing with modern browsers - Chrome, non-quirks mode IE,
    Firefox and Safari. Let us know what issues you are hitting, and help the team work out what needs fixing first - http://aka.ms/ssrsbrowserissues

    Hi Rhys,
    Thanks for your sharing of the informaiton.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Report downloaded to Excel

    Hi,
    It may seem weird but Is it anyways possible to have the report header present in the excel as frozen when downloaded.
    Thanks in advance,
    Anurag

    hi,
    Will this helpful??
    http://blog.trivadis.com/blogs/andreasnobbmann/archive/2009/06/24/fix-report-headings-and-variable-body.aspx
    thanks,
    saichand.v

Maybe you are looking for