Doing an ad - I selected Georgia Open type, but when I packaged the ad, it collected Georgia true type which is not allowed. Is my open font really true type??
I'm creating an ad for a newspaper publication that says it only accepts PDFs with Postscript fonts, not accepting True Type fonts. In Illustrator, I had selected the Georgia with the "O" for Open Type. Why when I packaged the ad, Georgia True Type was packaged, if I had selected the Open version in the Type pallet? How do I work around this? I have to make sure that the ad doesn't get rejected. Please help! Thanks.
Open Type fonts are just a container which can have either PS or TTF based fonts within it. As long as the font is embedded in the PDF properly, it should work.
Similar Messages
-
I'm creating an ad for a newspaper publication that says it only accepts PDFs with Postscript fonts, not accepting True Type fonts. In Illustrator, I had selected the Geneva with the "O" for Open Type. Why when I packaged the ad, Geneva True Type was packaged, if I had selected the Open version in the Type pallet? How do I work around this? I have to make sure that the ad doesn't get rejected. Please help! Thanks.
Hi Monika,
Thanks for the reply. I don't have 2 Georgia installed - I chose the Georgia in Illustrator because it had the "O" and I thought that meant it was an open font, not true type. I guess I don't understand what open means.
I created the ad in Illustrator and saved it as a press-ready PDF file. Then to hand off the files to my client's art department so they could archive, I packaged the illustrator file - that's when I saw the fonts were True Type (Georgia and Arial Narrow). I'm afraid to send the PDF to the publication to have it rejected 0 they don't take True Type, only Postscript. Does this mean I need to create outlines for all the type? -
why is my itunes not opening?
Try downloading it from here:
http://www.apple.com/itunes/download/
As you begin the download, make sure the left side of the screen shows you are downloading the current version (iTunes 11.1.3). -
Unsat!
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
New to here. As said above I updated to 7.02 because I thought I had too. I double click and it shows open apps. I hold one like before and it goes to control board and I have no idea how to close the apps or how to set up that board. I rarely use my phone. I wish I had not updated.
Thanks, it worked, however you cannot do them all at once any more, only one at a time.
-
when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.
Hi
AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
CCT -
Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!
Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can. -
Voice over does not allow me to open locked screen
voice over does not allow me to open locked screen iPhone 6
<Subject Edited by Host>Use two taps wherever you would use one tap. Navigate to Settings/General/Accessibility and turn it off.
-
The latest version of iTunes does not allow me to open a playlist in a separate window. I need this feature. Is there another way? You used to be able to double click a playlist and have it appear in a new window.
Others have commented on this too. It seems to be one of the 'improvements' of the newer version you are supposed to embrace with joy as an exciting new development. You can send feedback to Apple but realize you may be perceived as standing in the path of progress.
http://www.apple.com/feedback/itunesapp.html -
Why does my inbox say I have a email but when I open inbox no email
Why does my inbox say I have a email but when I open inbox no email
Do a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.
-
my iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button,
Hello arlyn-cavite,
If the screen is not showing anyting when you press any of the buttons you may want to try these steps.
From article iPhone: Hardware troubleshooting http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Take care,
Sterling -
I am trying to "authorize" my new computer so that I can download my previous purchases from the cloud. It says to open iTunes and go to the STORE menu and select AUTHORIZE MY COMPUTER, but when I open iTunes there is no STORE menu. Can anyone help?
If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(85933) -
When I try to startup Final Cut Pro 7 a prompt says a specific auto save vault. Does not allow program to open. Help
Use this free tool to trash FCP preferences: http://www.digitalrebellion.com/prefman/
-
What does the message "LIBROOKSBAS. DYLIB PLUG-IN' mean because it will not allow me to open Safari
Welcome!
You have installed Trusteer's Rapport software that many banks recommend, unware that it is poison to Safari. The developer keeps working on it but, so far, we don't seem to have a stable version that doesn't cause more problems than it fixes.
Removal instructions are here:
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x -
Itunes does not allow me to open my iphone 5c to sync, help?
I got the 5c about a month ago, and I was able to sync it with my computer to get my apps and music one time. Now when I try to sync it with my itunes, my itunes does not recognize it, nor does it come up in devices... I am not sure how to fix this?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
Maybe you are looking for
-
New 60" Panasonic plasma says no signal won't display picture/sound from 2011 macbook pro running os10.6.8 connected via HDMI with moshi MDP to HDMI Adapter. Same setup on former 4-yr-old Phillips Plasma worked fine (but the tv died!)
-
What is the best way to connect to a database in Java Class? I have used 3 different ways and would like to know what is the most efficient one. 1- Put the connection as a data member: public class DatabaseHelperClass { private Connection connect
-
I am using the latest iTunes (10.5.1) on a ThinkPad X220 Windows7-64bit. It has been running fine for ages, working with an iPhone 4S and iPad 2 now. Today, it will not complete loading. The program starts, uses around 47MB of memory, and then freeze
-
Right click - add to iTunes library?
Is there anything out there that would allow me to just right click on a music folder, and send it to the iTunes library, without having to open iTunes? If not, this would be a great, and (for me), welcome feature in a future version. Thanks.
-
I have no sound i get an error code 52
dv-7 windows 7 no sound error code 52