Doing clean install upgrade to windows 8.1 want to install my copies of premiere elements 11
also have photoshop elements 11 where is the download to my previousely bought software
Go to the main page of adobe.com and look for my adobe and work your way through the links there. You should still have download links in your orders section.
Similar Messages
-
Reinstalling TouchSmart software after a clean install / upgrade of Windows 7
I have an HP TouchSmart 610-1150xt. I have no use for much of the preinstalled software, so I would like to perform a clean install of Windows 7. At the same time, I would like to upgrade the preinstalled Windows 7 Home Premium to Windows 7 Ultimate. In addition to all drivers, I would like to reinstall the TouchSmart software. I have already made system restore disks to recreate the factory state, if needed.
Ideally, I would also like to reclaim the hard disk space currently occupied by the recovery partition. During the clean install, I would like to create two separate partitions -- one for the OS and applications; a second for only data.
I have performed numerous clean installs of Windows in the past, but have always had access to copies/licenses of all applications to add to the clean OS. I have downloaded all drivers from the HP website, but cannot find copies of the preloaded software. While the application manager currently allows reinstallation of preinstalled software, it is not obvious that this option would be available from the recovery disks (or the recovery partition) after a clean install of Windows 7 Ultimate.
Are individual copies of preinstalled software available from HP, perhaps on an FTP site? If so, how can I download these programs? If individual copies of these applications are not available for download, can they be accessed from the the recovery media or recovery partition after performing a clean install/upgrade of Windows 7?
Thanks.Did a Google search: here's something I found: http://blog.ehuna.org/2009/01/how_to_reinstall_the_hp_touchs.html ...
-
Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
I have only windows 7 installed on my mac and i want to install mac os on it how do go about it
i have only windows 7 installed on my mac and i want to install mac os how do i go about it
What version of Apple OS X can be installed depends on what MacBook it is: when it is from and what version of OS X was originally installed.
Can you find out? -
Office SP1 installed, but superceded Lync update still wants to install
Hello all, I had the same question in the SCCM forum and they told me to repost the same question here. So my machine is Windows 7 Enterprise SP1 x64 running newly downloaded Office 2013 ProPlus w/ SP1 direct from MS. I did not install the SP1
myself, I used the complete ISO off the volume license center that includes SP1. Loaded the updated OCT files from
http://www.microsoft.com/en-us/download/details.aspx?id=35554 to fix the install glitch as is documented. Installed with customized OCT msp file.
I installed my updates deployed via SCCM 2012 R2 CU1, using all office 2013 updates, not expired or superseded. I installed all of my published/deployed updates, but when running updates through Microsoft Update using Online, I see
Update for Microsoft Lync 2013 (KB2817678) 32-bit Edition as an update that is needed. I check and this update
IS SUPERSEDED by the SP1 (
http://catalog.update.microsoft.com/v7/site/Search.aspx?q=2850036 ).
That made me question do I actually have Office 2013 SP1 installed. Checked the version number as documented "In order to determine whether SP1 is already installed, you can look for the program version in the list of installed programs
in the Programs and Features Control Panel item. If SP1 is installed, the version will be 15.0.4569.1506 or higher."
Mine shows, "15.0.4569.1506" so it is installed.
Now that you have the background, why is it asking me to install an update SP1 supersedes when I have SP1 installed?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.Reposted the question in the Office 2013 forums...
http://social.technet.microsoft.com/Forums/en-US/0994f4d7-d04c-4266-9272-cb4ed127400b/office-sp1-installed-but-superceded-lync-update-still-wants-to-install?forum=officeitpro
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches. -
i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
thanks in advance,,,ahmad_uetlhr09 wrote:
i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
Boot Camp does not come on DVD, what did you install. -
I have the Creative suite 6 premium teacher edition installed on a mac and I want to install Premiere Pro and Photoshop ONLY on a separate macbook. How do i do this?
Get the CS6 installation file and when you run it on the separate machine choose to install only the programs you wish it to have.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html -
I have photoshop elements 11 installed on my desktop pc, I want to install it on my laptop as well, I read that it can be installed on two systems, but I get a message taht the redemption code has been used by another ID, please help
A redemption code can only be redeemed once. It is used to acquire a serial number. The serial number is what you need to activate the installed software. If you did not keep the serial number when you first installed, you might still be able to find it in your Adobe account online if you registered the software.
-
No Audio Output after Upgrading to windows 7; Soundblaster Card is installed
After upgrading to Windows 7 Ultimate (64-bit), I found that my speakers (which are built into my HP w2207 monitor) are not recognized. In the notification area I have the speaker with a red x in it, and it says “No Audio Output Device is installed”.
I have a HP Pavilion D4890Y with the Sound Blaster Audigy X-FI 24-Bit Xtreme sound card. I tried looking in Device Manager, and found “Multimedia Audio Controller” under Other, which states no drivers could be found.
I tried following some of the advice online, and downloaded the latest Realtek High Definition Audio drivers, but and the download seems to run successfully, but I don’t notice any differences. When I reboot as prompted, I’ve still got the same error.
I then tried forcing the Audio Device to use a Realtek driver, but Windows protests (saying it’s not sure it’s compatable with my device, and I end up with “Realtek High Definition Audio” under “Sound, video and game controllers”, but it has a yellow exclamation point. If I click properties, the device status says “This device cannot start (Code 10).” If I try to update the driver I get the message that it cannot find the driver software. If I uninstall the driver I’m back to the original problem (multimedia audio controller under original devices, with no known drivers).
I also tried downloading various files from the Creative site, but it’s not clear which one to use, and the 4 or 5 different ones I tried (including their recommended beta version for Windows 7), when each of them opens it says it can’t find any supported devices.
Suggestions? Thanks!
This question was solved.
View Solution.Hi,
"If the driver is a previous revision install it using the TROUBLESHOOT COMPATIBILITY tool that is part of the Windows 7 OS.
To use the tool, uninstall any drivers for the sound card you show listed in Control Panel/Programs/Uninstall Programs list. Delete the Device from Device Manager.
Download the revision of the driver from www.creative.com website to a folder you've created and placed on your desktop.
After the driver is downloaded, navigate to the "setup.exe" of the driver and Right Click - select Troubleshoot Compatibility ----
Let the compatibility tool select a possible solution then use its suggestion of TRY RECOMMENDED WINDOWS SETTINGS, if it does not find a solution it will submit only CUSTOMIZE SETTINGS and let you install it as you designate."
The preceding information comes from a Microsoft Windows 7 forum regarding an issue similar to yours.
the information you provided did verify that it is a sound blaster XiFi Extreme card as checked against the Vendor / Device list.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
T61 upgraded to Windows 7, now can't install Rescue and Recovery or Bios update.
I have a T61 6459 CTO that had XP SP3 on it. I upgraded to WIndows 7. I tried to install TVTVRNR450_025en, but I get an error msg "Rescue and Recovery does not support installing from the Operating System which upgrade from a legacy pre-load system." I tried deleting all old RNR and CSS programs in the old files after the install, but nothing seems to work. There is nothing listed in my add/remove programs. My Thinkvantage button doesn't work. How do I remove the old RNR? Should I have done that prior to installing Windows 7? Do I need to re-install my XP backup and start over? My Bios update extracts, but doesn't install. Help!
Hi, FSURN82
I did some research and was able to find this thread from Lenovo Forums. There are a few other people having similar issues. For some, installing an older version of Rescue and Recovery (sometimes even the one for their OS before the upgrade) would work fine. For some, however, they could not get it to work, so they would create backups manually using Windows.
As for the BIOS issue, what version are you currently running and to what version are you trying to upgrade?
Thanks,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
TS3212 Unable to instal Itunes in Windows 7 for want of a DLL file / installer error
Can anyone help me in installing the latest itunes. I have downloaded the setup file. When I try to instal, installation fails forwant of a DLL file / error in installer package. What should I do to successfully instal.
I have been using Itunes for so many years. But recently I formatted my laptop and installed the new OS, Windows 7. Previously I was using Windows XP, I did not have problem.
Is there any solution by enabling or disabling any of the service features under administrative tools in the control panel ?Although you're getting a different error message, try the procedure from the following user tip with that one:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems -
In October 2014, I purchased Adobe Premier Elements 8.0 (and the APE Templates 8.0) for my work computer (32bit Windows 7). Now they gave me a new computer which is 64bit (Windows 7). How can I get my Premier Elements program back on my new computer without having to purchase it all over again? I only had the program for a couple of months before they upgraded my computer to a 64bit I submitted my question through "Adobe Chat" and they said they couldn't help and I would need to check the forums. Thanks to anyone who can help! Jay
[Moved from Premiere PRO forum to Premiere Elements... Mod]jaym
What did you have for installation...
a. installation files from a purchased download from Adobe
or
b. installation disc from boxed packaging of the product?
If you have an installation disc, then insert the disc into the burner tray and follow the instructions for the installation
that present sequentially. Remember that Premiere Elements 8 on Windows 7 64 bit is still going to be a 32 bit application.
It will be running in the 32 bit compatibility mode of the 64 bit computer and the 32 bit limitations would apply. But Premiere Elements
8 will install on Windows 7, 8, or 8.1 64 bit but not as a 64 bit application.
Now if you purchased an download, those downloads are typically specific to the operating system to which it was downloaded.
Whether or not installation files downloaded to a 32 bit computer will work on 64 bit computer is questionable. Best advice is to
try it. You will get an immediate message from the computer and program if it is a no go.
Please review and let us know the outcome.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR
Add On...Premiere Elements Windows is a 64 bit application only when it is version 10, 11, 12, or 13 run specifically on
Windows 7, 8, or 8.1 64 bit computer. -
How do I install LR on a second computer?
download the installation files and install (as long as you have a serial number for the 2nd computer's os).
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Did custom install of iLife from Leopard disk, want to install the rest.
When I bought my macbookpro a couple of years ago, it was supposed to have Leopard but didn't, so the Apple Store gave me a Leopard install disk. I installed Leopard (not an upgrade, an actual fresh install) but I guess I did a custom installation and didn't install all of the iLife apps (like iMovie).
Now I want to install those apps, but when I get into the installation process, it looks like I may have to either archive the entire OS and reinstall or install all of the iLife apps. Is there a way to just install the uninstalled apps?
My Leopard disk is 10.5.1, but the current version on my computer is 10.5.8, I suppose due to periodic upgrades.
Thanks!
Mollie
Message was edited by: mollie.sDon't boot up from your original install disc. Instead, insert it, and browse it with Finder. You should see a "optional install software" or some similar looking thing (I can't remember its exact title). That's what you want to use to install iLife without reinstalling the whole system.
-
Can't run windows install/upgrade within windows installed on boot camp
I have an issue which seems to be something related to the new version of boot camp. I have installed Win7 on my mac, but my disc is special which requires it to be used as an upgrade. I am able to install it on a formatted partition but can't activate it until I run windows 7 setup again within windows and "Upgrade" itself. I cannot run windows setup within boot camp win7. I get the message: "Windows was unable to create a required installation folder. Error code: 0x80070005"
The reason I say "new" version of boot camp is because I found old solutions to this problem where you just have to uninstall the boot camp stuff from Windows, but you can no longer do that it seems.
Does anyone have a clue as to how I can get around this and do the upgrade?Quote
Originally posted by NovJoe
I think you'll need to check your HDD in another system to make sure that there isn't another lost clusters or bad sectors within the HDD.
Even though it worked fine with the old motherboard setup? Before I tried installing windows 98 and ME, it would automatically run scandisk and it didn't report any errors.
Maybe you are looking for
-
Searching where to get driver for HP laserjet M1217 nfw MFP Windows 8.1
I've been trying for approx. 2 weeks.... My printer works ok on my laptop W7 no problem. I just bought this HP ENVY 700-249 PC series. It copies the test pages, but that's all. It won't copy regurlar printing. I hope somebody can help me with this.
-
GL account error Valuation Clearing Account for multiple valuations
Hi I am trying to configure multiple valuations. There is one path: IMG --> Controlling --> General Controlling --> Multiple Valuation Approaches/Transfer Prices --> Level of Detail --> Define Valuation Clearing Account I created in chart of account
-
Standard program for calling shipping smartform
hi can anybody tell me wats the standard program which calls the shipping smart form from transaction VT03N
-
Hello, I'm using Hyperion Version 9.3.1 with Windows 2003 Server SP2 with MS SQL 2000. I've configured Shared Services and Essbase components. Added 3 users in EAS Console and administrator access has been given to them and then again added 1 more us
-
Nano using Logitech Speakers ----
I'm having this problem using my nano with Logitech MM50 speakers. When I plug in headphones it works, but when I plop the nano in the docking area of the Logitech speaker box, I get no audio sound? In checking to see if the docking station works, I