DOL lot required under Quality Inspection

Dear Sirs,
I am new to QM.
I want to know, when we are doing 105 movement for Skip/DOL lots the material is directly getting transferred to unrestricted stock.
My query is that
1. Skip/DOL lot should show under quality inspection till the usage decision is made.
2. What if I reject the lot & found that it is already used on line & there is '0' stock in unrestricted.
Kindly suggest a solution.
Thanks & regards,
Mahesh

And DOL means exactly what?
1 - Why would a skip lot quantities show under QI? You skipped it.. that's that whole idea. It goes right to unrestricted for use.
2 - You have no choicebut to recevie the material to unrestricted inventory. You used the material. That's exactly what happenned to it. It went to UR, you selected it and consumed it in an order. Of course there will be 0 stock. You have no choice but to receive the skip into UR. What you do is whatever your process would be for recalling the product that was made.
You might want to review Nitan's document on this: Stock posting of material for which stock is not managed by QM.
Craig

Similar Messages

How to by-pass: MIRO: material is still under quality inspection

All SAP Gurus,
At the time of posting the MIRO, system giving an error message as 'material is still under quality inspection'.
We want to by-pass this message and post the MIRO.
Regards,

Hi,
Thanks for reply.
We have already taken the UD, and cleared the lots.
Still the system giving the message as 'material is still under quality inspection'.
So, we want to by-pass this message and post the MIRO.
What settings are required for this?
Please help...........
Regards,

Good Receipt under Quality inspection

Hello Expert
Once the good receipt is done it should go to Quality inspection and then to Un restirected.
I have done certain check mark in Material master under quality management tab, even after it is moving to un restricted at the time of GR.
Thanks in advance
Abhi

I have done certain check mark in Material master under quality management tab
What settings you have in QM view of material master ?
If you done inspection setup correctly in material master,it will be reflected only in new purchase order or new line item
added to existing purchase order not to existing p.o or goods receipt.

Invoice payment blocked for material is under quality inspection

hi,
how to prevent invoice being processed (MIRO) when the materials are booked in quality inspection stock, Is this possible without the help of QM.
thanks

Hi,
Go to material master , check the QM View active.
If QM View is active , go to this view and change the QM control Key as 000 and remove the tick mark for QM Proc active Field.
Regards,
Andra

Quality inspection stock showing in urestricted stock without usage decision

Dear Gurus,
We have came across a serious issue in Quality department as follows.
The skip stock status "REL SKIP SPRQ CROK QLCH" is showing in unrestricted use stock even before the usage decision is made. Now when we are trying to reject the skip material, in MMBE there is no stock against Quality inspection. & the stock when rejected is getting deducted from unrestricted stock.
Request you please guide me so as to transfer the "REL SKIP SPRQ CROK QLCH" stock yo quality ispection once 105 is done.
Kindly guide what configuration settings need to be changed.
Regards,
Mahesh

Thanks Saravan.
As I am new to QM kindly clarify following things to me.
1. Even if we reject the skip stock by making the usage decision, it won't be deducted from unrestricted.
2. Skip/DOL lot will never be shown under Quality inspection in MMBE.
3. The only rejection of SKIP/DOL that will happen is the line rejection.
4. Once the line rejection happens materila status will be removed as DOL & converted to normal for next 5 lots.
Correct me if I am wrong.
Thanks & Regards,
Mahesh

How to Clear Stock From Quality Inspection

Dear Sir,
We have following problem scenario :
In the Quality View the wrong type of Inspection Type was given and subsequently during MIGO as the "Quality Inspection" option was selected under Stock Type , so after MIGO stock got posted under Quality Inspection and no Inspection Lot was created .
Now we want to clear the Stock from QI to either Un-restricted or any other type , so that material can be cleared and brought to Un-restricted Stock ultimately .
We tried to use MB1b with movement type 321 , but it given error as "Change the inspection stock of material CJMC1A0477 in QM only" .
I request you to kindly guide me as how can the Stock be cleared from QI .
With Thanks and Regards
B Mittal

Hi ALL,
I'm also facing the same issue. In material master QM view : Q M Procurement activity deactivated and Inspection setup also deactivated. This is not a proper way to solve the issue anyway i have deactivated, but still i am facing same issue.
Please anybody can help on this...
Regards
Chandru.

Transaction code to know stock lying in quality inspection(for UD)

Hi,
Pl let me know transaction code to know stock agaisnt materials lying under quality inspection ( for UD ) for more than one materials or plant wise or pgrp wise or sloc wise ....
Thanks
Arul Murugan

Hi,
In QA33 Transcation code ,Enter the lot creation ,In list settings select ,Only lots without usage decision and execute.
In the layout select Quantity to be posted(Quality stock).This will give the list of Inspection lots against the material to be posted to Unrestricted or blocked stock.
Manoj.N

How we may by pass quality inspection during PO creation

Hi Guru,
How we may by pass quality inspection via selecting document type in the PO. User create dummy PO in multi level marketing indsutry in order to achieve points & awards during month end. Since all the materials subject to quality inspection, material in dummy PO also falls under quality inspection. For your kind information there is no physical movement or GR for this dummy PO. It's just created in the system as I mentioned the purpose the above. I already created seperate document type to diffrentiate this scenario but looking forward how we may by pass quality inspection for this document type. Or is that any t/code which can by pass quality inspection during PO creation. Please advice. Thank you.
rgds,
nantha

Dear Netto,
As I said before user need to create dummy PO & must do GR in order to get the rewards & bonuses. User do GR in the system but it doesn't involve material movement. My question is how we may by pass the quality inspection for said GR since physically no goods involved.
Dear JS,
For your kind information this material subject to quality inspection & it has been set in material master. I tried one more as per your advice. System post this GR to quality inspection eventhough I change to unrestricted use in PO & GR as well before posting maid. Quality Inspection is auto defaulted for said material. Quality inspection is requirement to most of the goods so I can't change that. I'm wondering how we may by pass this just for dummy PO & GR.
I believe this clarifies your queries. Thank you.
rgds,
nantha

Quality Inspection in WM

Dear All,
I have 2 questions:
1) I want to receive materials under quality inspection during MIGO. How? I only managed to do it by entering Q at the PO.
2) After receiving quantities in quality inspection, how to transfer them in Unrestricted in WM?
best regards

hi
here is the process.
For a Material with Inspection setup in QM view of material
master.
step1
The moment you post GR , the stock will be received into QI
status in IM
and in WM stock will be under storage type GR Area External
Rcpts Q status .
Step2.
Using LT06 create a TO for the Material document
IM stock will be in QI status
WM stock will be under selected storage type (during TO
processing ) in QI status.
step3.
Then complete the usage decision against the Inspection lot using
QA32.
movement type 321 is triggered and stock moves from QI to
unrestricted stock in IM.
step4.
Confirm the TO created in Step 3.
step 5.
create a TO against PCN created in Step 3.
and confirm.
Stock will be in unrestricted status , available stock in WM.
Since you are saying that stock is in Q status at WM level.
pl. check if any PCN, TO is open for the Material
and try to close those by either creating a TO against PCN - LT05
or confirm if TO exist by using Lt12.
Thanks
Prasanna

Posting Block in Quality Inspection Material

I have one requirement in QM Module as my client wants to Block the payment for the Materials which are under Quality Inspection as there are several materials got paid without Quality Clearance.
I have changed Control key 0007 - Invoice Block, Message Code- Warning.
Can there be any setting which will throw the message that material is under Inspection.
Please advice on SOS basis.
Rgds,
Pradeep

Thanks for reply but my client wants to <b>Block the payment for the Materials</b> which are <b>under Quality Inspection</b> as there are several materials got paid without Quality Clearance.
I have changed Control key 0007 - Invoice Block, Message Code- Warning.
Can there be any setting which will throw the message that material is under Inspection.

Material Under Quality - Block for invoice/payment

Dear all,
When the material is lying under quality inspection the user should not be able to do invoice posting or posting.By standard its allowing once GR is done.How to do this
Regards,
Milton.I

Dear Vijay,
There was similar requirement from my client for the same. At that time contacted the OSS.
The message no.280 is there but you can not configure it.
Not allowing to post the external document like Invoice as it comes leads to so much descripency in real time.
The best solution what SAP has given is in QM control key just tick the Invoice and when the invoice of that perticular material comes for posting you can post but that will be blocked for the payment if the material is not cleared from the Quality.
As the material cleared from Quality, you can release the Invoices and if the material is rejected can raise the credit memo.
This is what we did after consulting the OSS
Thanks And Regards,
Krishna Reddy

Table for Delivery number & Quality inspection lot number.

Hi Gurus,
In which table, Delivery Number & Quality inspection lot number are related?
Reg.
Amol

Hi,
In LIPS
If required modify layout and select Inspection lot option
Kapil

Quality inspection lot creation?

Hi All,
We are implementing the QM inspection functionality in our project. But we just want the QM inspection lot to be created when GR is done and then we will clear the lot with UD directly. We do not want to do any other processes like defects recording,inspection plan,sampling etc. before UD.
Can someone please tell me the required configuration for this and the settings required?
Regards,
V S

Dear Vs,
as per my understanding to ur question, u should tick the Post to ins.stock indicator in QM view.
By doing so, no lot will be created, only your stock will be posted to quality(inspection stock).
It'll appear in qty stock column in MMBE.
Now after u have completed the inspection, all u have to do is just go to MB1B and use mvt type 321 to post the stock to unrestricted.
I think it'll help u.
Regards,
Sandeep

Reversal Of Quality Inspection Lot

Hi.
Against a Purcahse Order GR has been done and Quality Inspection has been completed, and released from Quality. Now the requirement is to reverse the GR but system is giving an error message while reversal "GR cannot be canceled since Quality Inspection is Performed".
Please suggest how to reverse GR for Quality relesed Quantities.
Thanx in Advance,
Harshu Madap

Hi
There are two steps to reverse the material which has been cleared from quality inspection.
1. In QA32 tick the option " select all inspection lots" and give your material and inspection lot origion.
There you will can find the lot which you already gave UD with green light. Just select the lot and press UD button. In the Usage decision Tab..... functions...... cancel lot. then save it.
2. Go to MIGO and put your PO number and the movement type 102. then put the quantity to be reversed.
In the Where tab, select the Stock type as Unrestricted. Then check and post the document.
Now your stock will get reversed.
Please check and come back.
Regards
Bala

Material rejected through quality inspection lot goes to blocked stock

Dear All,
All materials that are rejected through quality inspection lot should go to blocked stock. My client want to generate a report for viewing what all materials are rejected. How can do that?
scenario2: If the materials are rejected then can they be automatically be sent back to the vendor (return to vendor). if possible
pl send me some suggestions...!!!
pl discuss

Hi,
See mvt of material directly to blocked stock u can do by setting the Selected Set of ur specific UD code. in QS51/QS52. there is one column near to code, set R=rejected and set that field "BloCked Stock" . Define there and execute ur transcation, whenever u provide an UD system automatically post the stock in blocked location.
MCVX is the report where u can get the stock lying in blocked location, or for temp. purpose use QVI and developed the new report.
regards

DOL lot required under Quality Inspection

Similar Messages

Maybe you are looking for