Dolby Advanced Audio for Aspire V5-571G Windows 10

I'm using an Acer Aspire V5-571G laptop and I just today upgraded it to Windows 10. I need to download Dolby software (near the power putton, it says "Dolby Advanced Audio | Virtual SurroundSound", so I'm thinking I have get Dolby Advanced Audio). I'm having trouble finding a good place to download it from, though, so could somebody help me? Thanks in advance.

Hi, I Had the Same problem on my V5-571GThe only driver that ever worked properly with Dolby was the driver for The V5-552G on windows 8 (not 8.1) This will work on your computer even if different model... the new driver on the Acer site for winodws 10 has not work either. So the one I´m using is: Audio_Realtek_6.0.1.6878_W8x64_A To Download the Driver and Software needed Go to: http://www.acer.co.in/ac/en/IN/content/drivers and Go: Ultra-Thin / Aspire / V5-552G To get dolby to work: 1. Uninstall the current driver, and any software related to it (the dolby software) 2. restart 3. Install the driver for windows 8 (in my case it installed dolby automatically but I´ll explain how to install it manually below) 4. Restart twice (yes, I always had to restart twice after the install otherwise manually installing dolby would not work and I got an error when trying to run the install) 5. In the driver folders you downloaded and unzipped go to the folder "PCEE4" and run "DolbyAdvancedAudio.msi" 6.If you dont get the "Install PCEE" error, restart and you should be able to enjoy dolby (when its not acting up). If you get the error then you may have not followed the instructions properly. Go back to step 1 Good luck

Similar Messages

Dolby Advanced Audio for Pavilon G4 2306tx

Hello..does each audio driver version comes with Dolby Advanced Audio..or it is only for specific version? if it does, please find Dolby Advanced Audio for my pavilion g4 2306tx..thank you!

Hi,
If you are looking for a new driver for your sound card, i would suggest you to use DriverIdentifier (http://www.driveridentifier.com) to search for drivers, it's a very small tool but their database is very large. It's free.
Hope it help.
Nobita

No driver of dolby advanced audio for the series pavlion g6 2230tx

I am using pavlion g6 2230tx. It has the facility of dolby advanced audio. But i am not getting the driver for that.

Hello karnu. I understand you are looking for drivers for Dolby Advanced Audio. Lenovo is the manufacturer of the program, and you can locate drivers for the program here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028945
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

Acer Aspire V5-531 Dolby Advanced Audio driver issues after updating to Windows 10

After upgrading to Windows 10 I was getting an error on loading Windows media player which indicated that: The current Dolby audio driver version is 7.2.8000.17 and the softwareapplication expects driver version 7.2.7000.7. Please install a valid driver and application combination Although Windows 10 has probably updated your driver to the latest version of the driver (you can check this in device manager for yourself) but the Dolby Advanced Audio V2 application which was supplied by Acer (not Dolby) has not been updated to the corresponding latest version. So, you need an updated version of Dolby Advanced Audio V2 (Version 7.2.8000.17) Acer have not published an updated version. Looked all over the site coudn't find it. My solution was to remove the error was to uninstall the Acer version and replace with the correct version downloaded from the Lenovo site below. http://support.lenovo.com/us/en/downloads/ds028945 I'd wanted to make sure it was the same software, so I tried without uninstalling first and it refused as a version was already installed. So that was reassuring. Thanks for the archived post below pointing me to the softwre on the Lenoveo site at the Lenovo site. I'd looked all over the Acer site for it. http://community.acer.com/t5/2013-Archives/how-i-solved-the-dolby-realtek-audio-problem/td-p/103157 There are warnings on the page above not to use the Lenovo version of the software because of 'tuning', but my audio sounds just as good as before and the error is now gone. Without it the Dolby would have been uninstalled so it seemed a reasonable punt to me. Disappointed in Acer, will buy a Lenovo next time...

Hi, The only driver that ever worked properly with Dolby was the driver for The V5-552G on windows 8 (not 8.1) This will work on your computer even if different model... the new driver on the Acer site for winodws 10 has not work either. So the one I´m using is: Audio_Realtek_6.0.1.6878_W8x64_A To Download the Driver and Software needed Go to: http://www.acer.co.in/ac/en/IN/content/drivers and Go: Ultra-Thin / Aspire / V5-552G To get dolby to work: 1. Uninstall the current driver, and any software related to it (the dolby software) 2. restart 3. Install the driver for windows 8 (in my case it never installs dolby automatically, I´ll explain how to do it manually below) 4. Restart twice (yes, I always had to restart twice after the install otherwise manually installing dolby would not work and I got an error when trying to run the install) 5. In the driver folders you downloaded and unzipped go to the folder "PCEE4" and run "DolbyAdvancedAudio.msi" 6.If you dont get the "Install PCEE" error, restart and you should be able to enjoy dolby (when its not acting up). If you get the error then you may have not followed the instructions properly. Go back to step 1 Good luck

Dolby Advanced Audio driver and Windows 10 for G505

I have just installed Windows 10 to my laptop (G505) and continue to get an error message relating to the Dolby Advanced Audio driver. There are several other similar threads but I can't see an entry that helps me with my model. Is there any action I can take to complete a repair?

I have also continued to work on this problem, without success. I did notice something I will pass along in case it is useful to someone else. I noticed that there are Conexant drivers listed in Device Manager in both AUDIO and in SOUND, video, etc. After installing the suggested update, the Driver version in Audio was updated, but not the one under Sound. I tried having the computer automatically update the one in Sound, but it is still driver version 8.66.4.50. (Meanwhile, the Audio version is 10.0.10240.16384.) Please note that I am doing this on a G580, not a G505. I guess my question is, should the driver versions match--or at least be close?

Dolby Advanced Audio driver and Windows 10 for G480

So I've recently upgraded to Win 10. I have no problems so far except for the sound. The Dolby Advanced Audio software seems to be not working. Any suggestions?

I have also continued to work on this problem, without success. I did notice something I will pass along in case it is useful to someone else. I noticed that there are Conexant drivers listed in Device Manager in both AUDIO and in SOUND, video, etc. After installing the suggested update, the Driver version in Audio was updated, but not the one under Sound. I tried having the computer automatically update the one in Sound, but it is still driver version 8.66.4.50. (Meanwhile, the Audio version is 10.0.10240.16384.) Please note that I am doing this on a G580, not a G505. I guess my question is, should the driver versions match--or at least be close?

I need link for Dolby Advanced Audio (v2) for GP Pavilion g7 notebook pc.

Hello !
Here's my issue: I have in my posession a HP Pavilion g7 notebook pc. The problem is that allthough the speakers on the laptop says << DOLBY Advanced Audio>> , i don't have the Dolby Advanced Audio software.
I would like to ask if that is normal , or it is not.
In the case that this is not normal , i would like to ask for a link to download the Dolby Advanced Audio software for my HP notebook.
Please note that my notebook currently runs Windows 8.1 .
Thanks in advancde,
your HP member.
This question was solved.
View Solution.

Hi,
"Dolby Advanced Audio v2 is designed into select PC models and is not available for direct purchase or download. Our experts work with PC manufacturers to custom-tune each model for the best possible audio performance." that means it's built-in to the audio driver on your machine. Please try the following driver for Windows 8 & 8.1 64bit:
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Lenovo G580 Dolby Advanced Audio v2 windows 8 problem!

Hello!
One week ago I bought a brand new Lenovo G 580 laptop and everything worked okay until I updated the OS to win 8 PRO 64bit and the audio interface stoped working.
I have sound - with the windows mixer thing, but when I downloaded the win8 driver for dolby advanced audio v2 from lenovo website the sound doesn't pass through the software anymore.
Do you have any clue why it's like this? I really hope there is a fix for this because without the dolby processing now the sound is very low and dull.
Thanks in advance!
P.S. : Sorry for my english, if you find mistakes - I'm from Romania and I am really in a hurry right now.
Solved!
Go to Solution.

Sorry for the double post, but STILL THERE IS NO SOLUTION TO THIS?
I searched the holly wide web and found that there is a newer version of the conexant smart hd audio driver -
v 8.64.39.50 which Lenovo doesn't have. Now why is that? It's Dolby's fault or Lenovo's? Why is the feedback so bad? I mean, all I have read here from the oficials @ Lenovo are simple and logic solutions that I tried myself in the 1st place, there is nothing tech savvy in that answers.
And yes, I know w8 is fairly new but why the heck stil needs tweaking from the manufacturers, in this case for a audio interface?That's something that was supposed to work from day one - the drivers! (It's been so long since Windows 8 was launched, what the hell?)
L.E. : I FIXED IT! I was not looking for this but i did it! In device manager was a unknown device that requested driver. I uninstalled it. After that, 3 hours later I installed lenovo energy management utility which asked for a restart. After that I realized that Dolby Advanced Audio V2 IS WORKING!
L.E. 2 : Update :If what I wrote above does not apply in other cases, I came across another aspect -> In Speakers Advanced Settings I had the sample rate and bith dept set @ 24 Bit, 192000 Hz. If you choose that setting or 24 Bit, 96000 Hz the Advanced Audio V2 will not work anymore. The highest supported by the Dolby interface to work is 24 Bit, 46000 Hz - the one I use now.

Dolby Advanced Audio v2 drivers for ideapad S510p required

Hi I have an ideapad S510p laptop, which was sent to lenovo service to fix my keyboard.I have the laptop working fine now. However, I am not able to find Dolby Advanced Audio v2 drivers for ideapad S510p.Please help me with the driver files for Dolby Advanced Audio v2 (ideapad S510p) Many thanks. Deepen Falari

Hi Deepen,
Thanks for Posting!
First make sure that the Audio driver and the dolby will be in sync.
Open Device Manager
Uninstall the Audio Device Under Sound and gaming controllers
Now make sure you don't have any dolby components
Proceed to Control Panel / Programs / Uninstall a Program
Uninstall all Dolby Related programs
Restart if Prompted
Now install this software driver
Windows 8 (64-bit)
Audio Driver for 64-bit Windows
Windows 7 (64-bit)
Realtek Audio Driver
NOTE: When you install this driver take note of the driectory path where it will be extracted
Complete the installation.
Now open the directory path where the Audio driver installaer extracted the Audio driver
Normally at Drive C: the drivers folder
Open the folders inside and look for the file that says "aa" or Dolby advanced audio and intall it
You'll get your dolby back
Hope this helps
Cheers!

Problema con el controlador de Dolby Advance audio en Windows 10

Acabo de pasarme de W8.1 a W10, y me da error que Dolby Advance audio con un controlador. Mi Laptop es una G400s.Cabe recalcar que soy nuevo, no sé si estoy poniendo bien este tema.

Hola Bloody que tal,
El dolby esta asociado a la versión de tu controlador de audio, al instalar una nueva versión del controlador el problema comienza, tu ordenador no tiene controlador de audio para Windows 10 así que la recomendación es eliminar el dolby (des-instalar) ir a administrador de dispositivos para des-instalar el controlador de audio reinicia el ordenador, posteriormente Windows volver a instalar el controlador de audio pero sin el dolby este controlador debe funcionar, te recomiendo verificar las actualizaciones de Windows por existen descargas de controladores.
Un saludo.

Dolby Advanced Audio driver on Windows 10

I recently upgraded to Windows 10 on my E531,but now I get a message that the Dolby Advanced Audio driver is missing. How do I download the driver?

Found my Control Pannel [w-10] and noticed 2 Dolby logos.Went to programs & Features: got rid of the old one.This was after Windows had downloaded and installed an update from Conexant [SP]The "can't start Dolby driver" dialogue came up.By getting rid of the old one {Circa 2013] and keeping the newer [ Dolby Digital Plus Advianced Audio ]The dialogue has gone away.Profile Editor appears when i click in the Control Panel.good luck-wbajr tbc

Dolby Advanced Audio Interface software missing HP Pavilion Ultrabook 14-b003sa

I updated my HP Pavilion Ultrabook 14-boo3sa to windows 8.1 a couple months ago and since then the dolby advanced audio interface software is missing. The speakers are working and sound fine but I just want the option of the equaliser again. I have looked at the drivers available online and the most upto date driver for audio for this laptop is an IDT audio driver from 2012 for windows 8. Is there a more upto date driver that has the interface software? or is it just a case that the software has been removed on the update due to compatability issues? It sounds like dolby advanced audio is still active there is just no interface available as before I updated to windows 8.1. Please help. Thank you.

Hi Lhawley91,
I understand you are having issues with the Dolby Advanced Audio Interface software missing HP Pavilion Ultrabook 14-b003sa. This package contains the driver that enables the IDT High-Definition (HD) Audio for Windows 8.1.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112631-1&cc=us&dlc=en&lc=en...
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

E430 Fix bad sound quality with Win 7 + Dolby Advanced Audio

Problem: In Windows 7 x64, sound quality is tinny and sounds very badly DSPed when Dolby Advanced Audio is activated. Even setting all effects off and EQ off the sound is bad simply because Dolby is/was turned on. Going to Sound > Playback > Speakers > Properties > Enhancements, checking Disable All Enhancements and clicking Apply clears up the sound, but then the EQ won't have any effect.
Solution: If you have Win 7 x64, uninstall the Win 7 driver (h0a114ww.exe) and instead install the Windows 8 driver (h0ac10ww.exe). Note that this is NOT the Win 8.1 driver - that won't install under Win 7. The sound quality will be way better when you use Dobly EQ and effects. So far I haven't had any stability problems.
I thought my E430 had the worst sound card ever until I upgraded to Windows 8 and installed the new driver. I have Windows 7 dual booted and found the sound quality in Win 7 terrible so I played around with it and found the above solution.
Solved!
Go to Solution.

Hi FunkyB,
Welcome to Lenovo Community!
I want to thank you for the assistance provided on the issue. Please feel free to post in Lenovo Community Forums if you have any further queries!
Please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Cheers!
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

E430 Dolby Advanced Audio Issue

I updated my E430 with the Lenovo software update app and now get the following message when windows loads. Dolby Advanced Audio---------------------------The current Dolby audio driver version is 7.2.8000.13 and the software application expects driver version 7.2.7000.11. Please install a valid driver and software application combination. Anyone have the same issue?

Rostam wrote:
Dear all,
I have also had the same issue but no luck fixing it with any of the suggested ways.
I have a new E430 as of one month ago which had this problem occur about 1 week ago. The driver was fine to start with, then not so much. I have a lot of distortion, low-level, constant buzzing in background, but when I put on an audio track of any sort the distortion is so bad I cannot run an audio file with any degree of content. I called Lenovo today and all I could get out of them was the suggested driver update to 8.54.42.0
I have tried all the fixes posted here:
1) First I tried the Lenovo fix: update to new driver from Lenovo site (8.54.42.0), which I loyally did, and it didn't fix the issue. It then after that appeared with the error message the same as Rob530's: "The current Dolby audio driver version is 7.2.8000.13 and the software application expects driver version 7.2.7000.11. Please install a valid driver and software application combination...", this was after the suggested lenovo fix of updating by installing the new version from the lenovo site over the top of the old driver.
2) Second time lucky? No. Uninstalled conexant, restarted, driver self-re-installed to put in the old version of conexant. Same issues just without the old start-up error message. 3) Uninstalled again, this time upon reboot windows installed microsoft default sound driver by itself without the conexant bit. Third time lucky? No, this strategy also didn't work. 4) Uninstalled entirely, restarted, while no driver installed the new version (8.54.42.0) suggested by Lenovo with no driver already installed. This time installed new driver with no error message but sound problems as back as ever with ultra-distortion of all sound. Please, please Lenovo get this sorted asap. I have stuff to get on with and can't be spending 7 days for it to go to a depot in the middle of paper writing for uni semester. I used to have an old X60 laptop which I loved (old but still running now) and was pretty confident getting another lenovo IBM ThinkPad (even talking it up to friends), but this after just a month of having it is not instilling confidence in new Lenovo products for me. A prompt fix and resolution of these issues would be greatly appreciated. I wonder if this is actually driver related. It could also be a deffective audiochip.Is the sound also distorted when you use headphones?

Dolby advanced audio drivre

i need dolby advanced audio driver for HP Pavilion g6-2321ee Window 7 64bit
This question was solved.
View Solution.

Hi Mido112k,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6-2321ee Notebook and needing the Audio drivers. Here is a link to IDT High-Definition (HD) Audio Driver.
Unfortunately Dolby was not installed on this computer.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Dolby Advanced Audio for Aspire V5-571G Windows 10

Similar Messages

Maybe you are looking for