Dolby parameters only editable for PAL source material?

I noticed that the only editable Dolby setting is located under the MPEG 4 Pal Source Material folder. Does that mean if I render just a sound mix using that "editable" Dolby codec it shouldn't be played with NTSC? All of the other Dolby 2.0 choices (Example: under DVD Best Quality 120 minutes) cannot be edited. You're stuck with a boiler plate setting.

You can't edit any of the settings that come with the app unless it's been applied to your asset(s) in the Batch window. You can edit any setting you've created before or after it's been applied to your source.

Similar Messages

  • Audio for PAL

    will an AC3 audio stream suffice for a PAL DVD, or do you have to have another type of audio stream?

    Ditto. You can have .ac3 on its own, and a PAL disc will play properly.
    I believe the reason the specification/manual says something different is that .ac3 is a proprietary audio format owned & controlled by Dolby Inc. (an American company) - so no international DVD forum members were going to agree to having .ac3 as the specified (only) sound for PAL discs.

  • Isight only choice for BTV, Quicktime Video Capture

    Until I installed an iSight camera, I could capture video from TV via USB and Quicktime, Interview, or BTV.
    With iSight connected, Quicktime's "video source" choice is "iSight" or "Automatic".
    In BTV and Interview, the only option for "video source" available is "iSight". The other video source options are grayed-out.
    How do I get the video input options back?

    Thanks for the new info, yattaman
    I do not see a question in your latest post, but it seems to me that your TV capture device or its software is probably conflicting with iSight or your other applications.
    The software that you use to drive your iSight always "takes over video input" while it is in use, so that may be your problem. As explained in this Apple kBase article, iSight can be used by one application at a time.
    If you are using only one app at a time but still have the problem, be sure all your software, including the TV capture software and QuickTime are up-to-date. If your problem persists, the only suggestion I can offer is that you disconnect your TV capture device and uninstall any software that was installed with it. Carefully follow the instructions for uninstalling in its documentation. If the problem goes away when the TV capture device is not installed and returns when you install it again, that device, or its software, is the source of your problem. If the problem remains, the only workaround I know is to uninstall the conflicting device / software while you need to use the other applications that experience the problem you describe.
    If you do not get the help you need here, you may be able to find additional help from the "Support" section of the web site for your TV capture device. Some of them even have a dedicated forum for users of their product.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • HDV and DV versions from a PAL sequence based on HDV source material

    Hi,
    what is the best way to create DV ( for PAL) and HDV versions of the same source material ?
    I have the source material in HDV and started by putting the clips into a PAL sequence. I did the trimming and fine-tuning in the PAL sequence and thought that I can just copy the final clips into a HDV 1080i sequence to get the HDV version .... Obviously this keeps the PAL resolution and consequently displays the picture scaled down in the larger HDV picture...
    Any hints ?
    Thanks,
    Michael

    Do it the other way around. Edit in HDV and pout that into a PAL sequence, or simply export a PAL version when you're finished editing.

  • HELP I chose SD project preset instead of source material's HD and I have finished editing, can I change this?

    So I have been working on this music video for a long time. I finished yesterday and today I tried to export the video. It had this strange black box around it and the quality was bad.
    A little digging showed that the whole time my project presets were for some reason 640x480 SD instead of the 1920x1080 HD of my source video clips, so even if I tried to export in 16:9 HD, stretched 4:3 SD was the maximum quality I could get! The editing is very complex with lots of quick cuts, so there's no way I'm re-doing the whole thing, and I've already tried copying and pasting everything in the timeline to another project with the correct presets, and that doesn't work. Is there ANY way to fix this situation? I'm not too worried about transitions, if I lose those in the process it wouldn't really matter, but I want to save all my quick timed cuts between clips. I am using Premiere Elements 13 on Windows 7 64-bit. The source material is AVCHD 1920x1080p and a mix of 30p and 60p, and I want the final video to be the same but all 30p.
    Thanks for reading and I really hope to solve this issue,
    Ben.

    Ben
    Thanks for the update. Sorry that the new project was necessary. You did well making the transition from problem project to new.
    However, you may have gotten into some trouble with your export settings. But, at least that can be corrected in the export of the new project and should not require starting from the beginning in yet another project. I am suspecting that your export is 1920 x 1080i 29.97 "M2T AVCHD" instead of 1920 x 1080p 29.97 "M2T AVCHD".
    You appear to have used Publish+Share/Computer/AVCHD with the M2T H264 1920 x 1080p24. If you say that your export is 1920 x 1080 29.97, then you would have had to go under the Advanced Button of the p24 preset to customize the preset to 29.97 instead of 24.
    But, now for the unexpected under that preset....if you use Frame Rate 24 frames per second, you have progressive settings. But, if you change the Frame Rate to 29.97 under the Advanced Button of the preset, you have interlaced settings. In the latter, note the fields for Upper or Lower for Field Order. That is interlaced video. Interlace video has fields, progressive video does not. And, if you do the export and read the properties of the export using a properties read out program, you confirm interlace and not progressive export. Confirm in project....
    Can you use the MP4 H.264 1920 x 1080p30 preset instead?
    Please review and consider.
    Thank you.
    ATR

  • Assign Source of supply is not working for contract with material group

    Dear Experts,
    I have searched all the threads and gone through before posting my query. So i would ask moderators to go through the thread properly before rejecting this.
    We have value contracts with respect to a particular material group without material and with item category W in the contract item, Please note that for the materials with this material group, the source determination is not set and source list is also not maintained.
    When we create PR for the material with this contract, and when we click on assign source of supply contracts used to get popped up, but recently from few days, when we click on assign source of supply we are getting an error " no source found for this item ".
    Can anybody help on this.
    Regards

    @ Biju,
    As mentioned earlier, we are not creating PR with reference to contract.
    first we are creating contract with item category W (material group), without material and plant details.
    we create PR with or without material with account assignment K and with the material group in the transaction ME51N, and after inputting all the fields, we click on assign source of supply, it was proposing the existing contracts with respect to material group earlier, but it is not happening for particular material group(it is working for all other material groups)
    Hope it is clear.
    @ Dev Patra,
    we are using DIEN-Service material types and we assign that particular material group to only service material type.
    we have not ticked, source list in the material master, we donot have any source list for the materials under that material group.( please check the note 457110- question number 14.)
    Regards

  • How to restrict "insert new data source" in Analysis, edition for Microsoft Office report

    Hi Experts,
    There is a requirement in my current project: when an end user access a Analysis, edition for Office Report from BI platform, they can view and refresh the report. But users should not be able to add new data source in that Analysis Report. As per my understanding, that means "insert data source" button should remain disable for the user.
    I have check all available access levels from CMC, but cannot find any. It will be great if you let know correct access level in CMC for the same.
    Any comments/recommendation will be appreciated.
    I am using BOXI4.1 SP3 version with Microsoft Office 2013.
    Thanks in advance.
    Regards,
    Animikh Chaudhury

    The answer from our account manager is that there is only one license model for AO - which means every user is able to refresh, navigate, use planning functions and add source data (whith the standard license). Adding a DS is not really more then navigation because you can build a Query with all key figures and characteristics of a cube which gives you flexibility. That makes sense because there are no authority checks installed from SAP to avoid this (maybe this is different in combination with HANA and workspaces) .
    Futhermore SAP has no possibility to measure how many users are doing which functions instead of recording every action of every user. But where should they do it? You could use it with BO or with Netweaver or in mixed Environments. The BO license check is done on BO platform and there you have no possibility to create new users which you need for connection (I'm not sure how this is monitored in a pure BW Environment without BO).
    Furterhmore another possibility to add new data is using vba. You don't really need the buttons from the menu.

  • Possible to make an item editable for certain users and read only for other

    Is it possible to make an item editable for certain users and read only for others?
    I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
    Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

    Thank you, your suggestion worked.
    It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

  • How to edit the html source code for my site

    I have just started a blog, and am VERY new to it. I am trying to edit the html source code on my site (ie, to insert google adsense search bars). I go to my blog site, get to page source and see the html but I am not able to edit it. Not sure what I am doing wrong. Thanks!

    You can use any editor you want mine is set up for notepad.exe
    :see http://dmcritchie.mvps.org/firefox/firefox.htm#notepad
    :to invoke use "Ctrl+U" or View > Page Source
    :this is for sites that you maintain on your local drives or servers, and copy over to a website.

  • The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

    The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

    The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

  • Settings for making 16:9 aspect ratio from 4:3 source material

    Hello,
    I am trying to make a 16:9 short video from 4:3 source material but there's something wrong with the settings. The video is just stretching out to fit a 16:9 size, it isn't chopping off the top and bottom of the 4:3 size.
    Here is the settings I currently have on the sequence and footage. I have the sequence set to anamorphic, in the motion tab I have the scale at 133 and under distort I have the aspect ratio set to 33.33. I've done this before with these settings and it came out fine.
    I know the quality is reduced in doing this but I'm just uploading a small version to the web so the quality is fine for what I'm doing.
    Thanks in advance.
    Pete

    Reset your Motion settings and try again. Maybe take the clip out of the sequence, then put it back in. Undo and redo motion settings, sequence settings, and clip anamorphic settings.
    tim

  • Label printing should be only once for a material doc number

    Hi,
    we have a tcode in which if we provide a material doc no. and number of prints..but once we print the labels,
    then again if we have to print for the same material doc no..it should not print..instead it should ask for permission to print that number again..is there any option available in scripts to do like this?

    try to maintain ztable
                     ztable fields document no , printed...
      such that to identify the docu no has been printed previously r not...
    select single printed  from ztable into printed where  docu no = p_document.
        if printed = X
          if it is printed then try to pop up a screen such thst to approve it ....
           else.
         print it strightly.....

  • Matching back to source material in the timeline?

    How do I match back to source material from the timeline? I can't seem to find this info anywhere in the FCE help guide.
    For example, I have a VA1A2 clip that I drag into the timeline. I start editing, and in the process delete part of the video portion of the clip, leaving me with only the audio A1A2 tracks. Now I want to get that video portion back. How do I get the video portion of the clip back in the timeline, in synch?
    Thanks!

    Press the F key. Then edit it back in.
    All the best,
    Tom

  • Which sequence setting to use for PAL slideshow?

    Hello All,
    I have a project that I am a little unsure about setting up. The output will be a PAL formatted DVD. The source material is all jpg's from a digital camera. The project is a simple slideshow with music. I'll be formatting the pictures to 720x576 in Photoshop. My question is whether I should be using the basic DV-PAL sequence setting even though it will never be output back to tape. If not what would be the most appropriate setting assuming this will be exported via Compressor and authored in DVDSP?
    Thanks,
    Chris

    I'd go for an uncompressed 10 bit setting but that would take some pretty fast drives to play while you edit... a dual 800 FW array would do it or faster. 8 bit might work just about as well and not require the dual.... and either is better than DV.
    Jerry

  • Source Material error when burning disk image

    Well, I've been haunting these forums for 10 days, finding answers to every darn problem under the sun I've encountered! (thanks folks, I've been near hysteria) Now I have yet another problem, and I cannot find an answer in the forums (sorry if it's there.)
    I have built my movie in iMovie, imported to iDVD, created my disk image, played my disk image (worked perfectly), connected my brand new LaCie external burner, loaded Toast 6 Lite, dragged my mounted disk image icon into the window, popped in my Verbatim DVD+R and let 'er rip.
    And, poo, I'm informed that 4 files are in an unsupported format and cannot be imported. EH? I thought the disk image kept all self-contained? I press onward, and hit burn. Churning, churning... and then this message:
    "Could not record disc because there is a problem with the source material. Result code= -18774"
    Trying to burn via Disk Utility doesn't work either. My mounted disk shows up, but when highlighted the burn button is grayed out. Only when I click on the .img file is the burn option lit.
    Am I supposed to drag the .img file rather than the mounted little disc icon? PLEASE HELP. These movies were SUPPOSED to be Xmas presents... now I'm praying for Michaelmas gifts!
    TIA

    ohmygosh. Lightbulb! I've been trying to burn the file_name one and not the file_name.img one. I assumed the point of mounting the file was to burn it, but it's only to preview it, yes?? So, I did that via Disk Utility, and it worked!! Only thing I can't figure is how to set the burn speed. I know slower is better, but can't find the place to tell it the speed. It never asks.
    Toast still gives me the source material error. I do have the 'video' tab selected, and I've done the drag-n-drop method AND the 'add' method ('copy' is only for transferring data from one CD/DVD to another in my version, evidently). Toast doesn't allow me to grab the .img file, so I'm assuming IT wants the mounted file_name one? I'd still like to be able to use Toast to burn, so a solution to this would be appreciated. I'm using Toast 6 Lite, BTW.

Maybe you are looking for

  • Weird - Query timeout on 1 client but not on another

    Hi folks I have a really strange problem. In SSMS I run a query on machine A and it runs in under a second. I run the same query on machine B and it takes nearly 2 minutes to run. Both machines are querying the same DB. I tried it on a 3rd machine an

  • Running iTunes within a WinXP guest system on Linux host

    Since I don't think Apple will release a Linux iTunes version I am thinking about running WinXP as a guest on a Linux host (VMware). Could I safely use iTunes within this virtual machine, buy songs from the iTunes Store,... or would the digital right

  • Connecting copper to new optic fibre

    I am thinking about changing to optic fibre cable.   Anyone any idea how long the change over takes and does it make any real difference to the speed on the computer.    My computer is  7 years old and although I keep it clear of any real problems, i

  • Blank lines while printing Address

    Hi, We are facing an issue in smartforms w.r.t address display. We are passing address number which will get all the fields relevant for displaying, but a blank line is coming between two fields for the same address number( Say the fields are "Street

  • Does DII support document based web service?

    Hi, I am writing a web service cleint DII, the web service is document based. I followed the sample in https://bpcatalog.dev.java.net/nonav/soa/standalone-client/ Everything seems correct. When I call call.invoke, I got an exception saying "operation