Dolphin 4.8 mounting devices - not shown in Places

Hello guys!
"gvfs" is installed. Then I open "/etc/polkit-1/localauthority.conf.d/50-localauthority.conf" and set "AdminIdentities=unix-user:alex" which is my username.
Then echo
[Mount system internal media for group storage]
Identity=unix-user:alex
Action=org.freedesktop.udisks.filesystem-*
ResultAny=yes
ResultInactive=yes
ResultActive=yes
to "/etc/polkit-1/localauthority/50-local.d/mount.pkla".
I had similar config for KDE 4.7 and dolphin showed all devices in "Places" and was able to mount them at click. Now that I have dolphin 4.8 installed - it doesn't show unmounted devices in "Places" and this config doesn't affect dolphin.
I didn't install full KDE 'cause I run IceWM. Just basic kdebase-[lib,dolphin,workspace,runtime].
How to make dolphin show and mount all the storage devices?
EDIT:
I forgot to autoload dbus. That's the reason.
Last edited by Mr. Alex (2012-01-29 13:35:49)

Similar Messages

Sat P105-S2036 WinVista SD memory card device not shown in WIndows Explorer

The label on the botton of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. It has a single slot SD memory card only reader in the front. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. This SD reader shows up in Device Manager as well as in My Computer Windows Explorer window as a drive with letter D since I renamed the DVD drive to letter R. During the last two days, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except that the SD memory card reader no longer shows in neither Device Manager, nor Windows Explorer. But the Device Manager does show a working SDA Standard Compliant SD Host Controller, and a nonworking Mass Storage Controller (missing driver) under Other devices (See Attachment 1). What needs to be done to make the SD memory card reader a working device in Windows Vista? Thank to answers in advance.
Solved!
Go to Solution.
Attachments:
01 Device Manager shows SD Controller but no SD reader device.txt ‏2 KB

Thanks to Moderator Trina for moving my inquiry to Moved: /t5/General-Technology/Sat-P105-S2036-WinVista-SD-memory-card-device-not-shown-in/m-p/34845#U34845
There I searched for SD and found co-member kaidssss' 2009 February 27's post "SD memory Cards Slots" which was resolved by Super Contributor Jerry_Lippey in less than 3 hours with this CSD.Toshiba.com driverweb page
TI Card Reader Driver for Windows Vista/XP at
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/download.jsp?soid=1713025
THANKS.

Devices not shown in CS lms 3.2

Hi,
LMS 3.2,the devices are not shown in the CS.
In CS Device management no devices are shown(0 devices).But devices are shown in DFM,RME and IPM.
Any help??
Regards,
Channa

HI wass,
Thanks for reply..
Please find the screnshot of device management of dcr and dfm.
Device are shown in the DFM.
Regds,
Channa

Trying to sync for the first time to my ipad. device not shown on leftside. i want to sync photos using iphoto.

trying to sync photos from macbook pro to ipad, first time. What do i do if no device is shown even though it's plugged in, etc?

Thanks, Jim. I finally got it all to work after I closed iTunes on both machines, unplugged the iPad, and started from scratch. To anyone else having this problem, if you hit the wrong thing for "device", it disappears totally.
Gail

Ipod shuffle 4th generation device not shown on itunes, not charging. Seeing red light when connecting to USB charger for a few seconds, then nothing. How to fix this?

My ipod shuffle 4th generation was working fine for a few months. My son then bit the USB charger. I bought a new USB charger, but the shuffle is not charging and not showing up under the devices in itunes. It also doesn't appear in my windows under my computer. Just to note. I also have a new ipod touch. I am able to charge that fine on the same computer using the USB charger. The device (Ipod touch) does show up in windows and in itunes. The shuffle doesn't show in either place.
I have tried to use the apple support page. I went through each step. I made all of my USB drives not shut down, I had my computer on all night to try and charge the shuffle. All I see is a red light that appears on the shuffle for a few seconds when I first connect the USB charger to the computer. Then, nothing. Since this was working a bit ago, I don't think that I have a defective shuffle. The USB charger is brand new, I just picked it up yesterday from the apple store. I have the short one, and the longer cable as well.
Any help that you might be able to give to me would be much appreciated. My daughter is missing listening to her music. Thanks!

Instead of "charger," you should call it the "USB cable" to avoid confusion. When started reading your post, I was thinking, how can your son break a USB power adapter (the "charger" that plugs into a wall socket) by biting it...
Since you got the product with the two USB cables at the Apple Store, you have the right replacement (some third-party replacements are for the 2nd gen shuffle and do not work with the 4th gen shuffle). Make sure you are completely inserting the plug into the headphones jack. The fit may be tighter than expected, since the connectors are new.
http://support.apple.com/kb/TS3572
If you tried both of those cables, it would be unlikely that you got two faulty cables in one package. If a new USB device has been added to the computer between the time it worked with the old cable and now, there could be a problem on the USB bus (such as not enough power or a device conflict).
As a test, you should shut down (power off) the computer and disconnect all USB devices (including any hub), except for standard keyboard and mouse (if used). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on the computer.

Enrolling iOS devices "not shown in Configuration Manager console"

After successfully enrolled my Windows RT I want to enroll my iOS devices (iPad 1 & iPhone 4). First step is completing the iOS configuration (uploading APN certificate). Next step I associated my devices by installing management
profiles (https://manage.microsoft.com). All my application appears when starting the Company Portal App but my device will not appear in my Configuration Manager admin console.
When I select the Support tile in the Company App it says "Name not yet available", I'm not sure if this is a normal behavior?
Any thoughts/pointers are welcome.
Regards,
Ronny de Jong | inovativ.nl | Blog: donnystyle.wordpress.com | Twitter: twitter.com/ronnydejong

Hi Jon,
I've installed the iPhone Configuration Utility and collected the logging below as part of enrolling the iOS devices (iPad & iPhone) and installed the Management Profile:
iPAD
Feb 22 23:08:36 iPAD profiled[255] <Notice>: (Note ) profiled: Service starting...
Feb 22 23:08:36 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-a-y-l-o-a-d-s-.-D-e-v-i-c-e-I-n-f-o -q-u-e-u-e-d -f-o-r -i-n-s-t-a-l-l-a-t-i-o-n-.
Feb 22 23:08:37 iPAD Preferences[256] <Warning>: Splitview controller <PSSplitViewController: 0x24a900> is expected to have a master view controller before its used!
Feb 22 23:08:38 iPAD Preferences[256] <Warning>: BTM: attaching to BTServer
Feb 22 23:08:42 iPAD profiled[255] <Notice>: (Note ) MC: Checking for MDM installation...
Feb 22 23:08:42 iPAD profiled[255] <Notice>: (Note ) MC: ...finished checking for MDM installation.
Feb 22 23:08:43 iPAD profiled[255] <Notice>: (Note ) MC: Enrolling in OTA Profile service...
Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Issued certificate received.
Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Retrieving profile from OTA Profile service...
Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Received final profile: Microsoft.Profiles.MDM
Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Beginning profile installation...
Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-r-o-f-i-l-e-s-.-M-D-M -i-s -r-e-p-l-a-c-i-n-g -a-n -e-x-i-s-t-i-n-g -p-r-o-f-i-l-e -h-a-v-i-n-g -t-h-e -s-a-m-e -i-d-e-n-t-i-f-i-e-r-.
Feb 22 23:08:59 iPAD profiled[255] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
Feb 22 23:09:00 iPAD profiled[255] <Notice>: (Note ) MC: Issued certificate received.
Feb 22 23:09:01 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-r-o-f-i-l-e-s-.-M-D-M -i-n-s-t-a-l-l-e-d-.
Feb 22 23:09:01 iPAD profiled[255] <Notice>: (Note ) MC: Removing certificate with persistent ID 69646e7400000000000000a2
Feb 22 23:09:01 iPAD SpringBoard[51] <Warning>: Reloading and rendering all application icons.
Feb 22 23:09:02 iPAD profiled[255] <Notice>: (Note ) MC: Removing certificate with persistent ID 69646e74000000000000009f
Feb 22 23:09:02 iPAD mc_mobile_tunnel[260] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Feb 22 23:09:02 iPAD mc_mobile_tunnel[260] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Feb 22 23:09:02 iPAD mc_mobile_tunnel[261] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Feb 22 23:09:02 iPAD SpringBoard[51] <Warning>: Reloading and rendering all application icons.
Feb 22 23:09:02 iPAD mc_mobile_tunnel[261] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: mdmd starting...
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Looking for managed app states to clean up
Feb 22 23:09:03 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
Feb 22 23:09:03 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
Feb 22 23:09:03 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
Feb 22 23:09:03 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Network reachability has changed.
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Network reachability has changed.
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:09:11 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:09:11 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:09:13 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:09:13 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:09:14 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:09:14 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
Feb 22 23:09:14 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
Feb 22 23:09:14 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
Feb 22 23:09:14 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
Feb 22 23:09:16 iPAD mdmd[258] <Notice>: (Note ) MDM: mdmd stopping...
iPhone
Feb 22 23:23:22 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Checking for MDM installation...
Feb 22 23:23:22 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: ...finished checking for MDM installation.
Feb 22 23:23:24 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Enrolling in OTA Profile service...
Feb 22 23:23:24 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:24 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:29 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:29 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Issued certificate received.
Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Retrieving profile from OTA Profile service...
Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:30 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Received final profile: Microsoft.Profiles.MDM
Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Beginning profile installation...
Feb 22 23:23:37 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:37 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:37 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
Feb 22 23:23:38 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:38 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:38 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Issued certificate received.
Feb 22 23:23:39 iPhone-van-Ronny SpringBoard[67] <Warning>: Reloading and rendering all application icons.
Feb 22 23:23:39 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Profile Microsoft.Profiles.MDM installed.
Feb 22 23:23:40 iPhone-van-Ronny mc_mobile_tunnel[1094] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Feb 22 23:23:40 iPhone-van-Ronny mc_mobile_tunnel[1094] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: mdmd starting...
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Looking for managed app states to clean up
Feb 22 23:23:41 iPhone-van-Ronny com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[1091]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
Feb 22 23:23:41 iPhone-van-Ronny com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[1091]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Network reachability has changed.
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Network reachability has changed.
Feb 22 23:23:41 iPhone-van-Ronny awdd[1092] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Feb 22 23:23:41 iPhone-van-Ronny awdd[1092] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:23:45 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:23:45 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:23:48 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:23:48 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:23:49 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:23:51 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: mdmd stopping...
Thanks,
Ronny de Jong | inovativ.nl | Blog |
Twitter

USB storage devices not shown in Finder, yet function, and show in System Information?

Occurring starting about last month, this has gone from a seldom, to all the time situation. plugging in any USB memory device either directly to the computer, or with cables, will allow the files to be accessed/changed/deleted by programs, but the device with it's files will not show in finder. The device shows in System information. I have set Finder to show everything, but they no longer apear. Before failing entirely, I would sometimes have the device show for a short time, then get an "Improper removal" error, without touching the device, after a few moments. All these memory devices still function properly when used in external devices and when direcly accesed by software. Not being able to use finder to modify content is a significant problem.

Well I'm about out of ideas. Going off what you described, these devices work fine elsewhere and gradually failed on your computer.
Unless someone else can post other ideas, I only can suggest a reinstall of Lion from scratch. I would make sure I had a good backup from TM and an additional backup of your important files just in case.
Probably the easiest way would be to make a bootable USB stick or drive to work from. Procedure here: http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/
If you can accomplish that, see if you can boot from it. If so, use Disk Utility to erase the main drive and reformat it. Verify the drive is OK. Then quit Disk Utility abd procede to install Lion.
When the installation is finished, reboot and use Setup Assistant imediately to migrate your user data and applications back from the TM drive. Don't use migration assistant later.
I doubt it will help since the Comb-Update didn't fix it, but who knows.

Devices not shown on sidebar of iMac ie iPod ?

Hi
I am going crazy since the update of the software IOS6 onto my ipod. Now my imac do not shaow the device of the ipod [or even the iphone] on the sidebar. So I can't even drag songs from Imac to my ipod!
Can anyone help please. The old software worked perfectly. Why always change and make things muddled!
Oscar

I believe you are talking about iTunes side bar.
Try to connect it using USB cable and check will iTunes can see your device(s).
Reboot your device. And check it over Wifi.

ITunes directory on iPod nano device not showned

I have a iPod naono 4th generation. I nedd to transfer the iPod Music Library from the iPod (using as a disk enabled) to my iTunes library. But following the instructions to do it I must see the iTunes directory on thr iPod nano device. I cannot see this directory on the iPod nano disk. My operating system is Windows XP. How can I visualize the iTunes directory on the iPod nano ? The question is: how I can transfer my music library from the iPod nano 4th generation to my iTunes library ?
Roberto

Hello roby000,
And welcome to Apple Discussions!
You will also have to show hidden files in order to access the music directly on your iPod. By default, Windows hides hidden files and folders (thus the name). Go to Options (in the Tools menu), and on the View tab, check “Show Hidden Files and Folders”.
For more help on manually copying music from your iPod to your computer, see this article.
http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/
B-rock

Yosemite 10.10.1: Finder/CIFS mount problem: wrong folder count/folders not shown @samba shares

Hello to all,
we have several MacBook Pro (15" MBP Retina 2012/13"MBP Retina 2014) running. After upgrading to Yosemite 10.10.1 we had one nightmare after the other.
Most problems could be solved with 3rd party software upgrades but there are several problems with the operating system itselve which can not really be called a professional productive system at the moment...
Ok., one thing after the other...here is one of our biggest problems:
After upgrading from Mavericks or Mountain Lion to Yosemite 10.10.1 the CIFS/SMB mounts to our samba 3.x servers, running on Ubuntu Linux LTS 12.04 makes trouble. We could mount the server shares but after browsing with the Finder the beach ball occures and the Finder hangs forever. Sometimes we could not refresh the Finder, killing the process ended in a complete hang-up of the system which ended in a switch off death blow. This is not amusing because we have 30Tb of customer data there, which has to be worked out.
We heard about the SMB3 protocol which will be used per default in Yosemite and so we decided after some testings to upgrate our Ubuntu servers to the latest LSF 14.04. release with samba 4.1.6 installed. There was no message from Apple for this SMB protocol release upgrade, never heard something related to Yosemite (Why?).
Ok, after these server upgrades and disabling most of the Spotlight functions the performance to the CIFS shares was a little bit better as before but now we have another problem with the Finder...if you browse to the shares there are folders missing which have lots of files in it. For example there is a folder with 60 subfolders and 3562 files on the first level in it, the Finder shows 220 files and 15 folders. The Terminal shows a different count with "find . -maxdepth 1 -type d | wc -l" or "find . -maxdepth 1 -type f | wc -l" but there is also a difference to the original file and folder count. It doesn`t matter if the clients are connected via WiFi or Gigabit Ethernet. We have no access problems. We have the same behavior if we set the files and folders to 0777 permissions on the servers. The deletion of the preferences files of the users on the MacBooks does not solve the problem. If we use the "Go To Folder" option and type the path to a folder which is not shown in the Finder you get an result or not. But it is also possible that the result is not correct and there are also still files or subfolders missing.
In my opinion this is a timeout problem and a "special SMB3 protocol interpretation" which is buggy. We have one hint found in /var/log/system.log:
"Jan 23 14:35:49 wsosx33.clients.getcom.de KernelEventAgent[69]: tid 54485244 type 'smbfs', mounted on '/Volumes/customersdata2015', from '//x144067:@srvlxp013.servers.getcom.de/customersdata2015', not responding"
We had no problems with Mavericks at all, we still have no problems with Windows 7 Pro/Ultimate, Windows 2008R2 (native or virtual) or Linux Mint 17/17.1 clients, neither with samba 3.x nor with our actual environment and different newer samba releases.
We believe that this is a big bug in Yosemite, but we cannot go back to Mavericks because of incompatible TimeCapsule backups. Our workarround at the moment is that we have installed Linux Mint on our MacBooks to get 80% of our daily jobs done, rest has to be done with Windows 7 installed over virtualbox @Linux.
We have no clue at the moment how to solve this problem, the samba logs do not give any hint. The access from other operating systems is perfect and very fast, but not with Yosemite. We checked different tips found in the internet but nothing helped.
Does anybody has another idea to get Yosemite working or should we keep Linux Mint until Apple will provide a CIFS/SMB patch and going on with our workaround solution, which is productive at the moment ??? Our staff is not amused and wants one solution and not this workaround with two operating system. We have to decide wether we wait until Apple will get this fixed or we have to switch to Microsoft Windows (which is a No Go for me, but I will not be asked...).
Thanks in advance
C.

Hi William,
thank you for your response.
As you can read in my post I talked about CIFS/SMB.
It makes no difference if we mount the share over CIFS or SMB.
Folders with lots of files will not be shown even if we use SMB3 or an older protocol.
As mentioned I believe this is a timeout problem.
Does anybody know how the CIFS/SMB timeout setting in Yosemite could be changed?
Kind regards
C.

TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???

Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod".

Can't mount external HDD? "usb 1-1: Device not accepting address"

I just bought a Medion HDDRIVE2GO (Full Speed) from Aldi, and at first when I plugged it in, everything went fine (well, I thought so). Appearently it had some errors with HAL not being able to read the HDD (error name="(unset)").
I gave it a reboot, and now it does not work at all! In dmesg, I have this output (the bottom is the most important I guess)
[dell@linuxnas ~]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable)
BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
last_pfn = 0x1ffe2 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 0FEDA0000 mask FFFFE0000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 0000000000100000 - 000000001ffe2800 (usable)
modified: 000000001ffe2800 - 0000000020000000 (reserved)
modified: 00000000feda0000 - 00000000fee00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001ffe2000
0000000000 - 0000400000 page 4k
0000400000 - 001fc00000 page 2M
001fc00000 - 001ffe2000 page 4k
kernel direct mapping tables up to 1ffe2000 @ 15000-1a000
RAMDISK: 1fe3b000 - 1ffd2770
ACPI: RSDP 000fde50 00014 (v00 DELL )
ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D4010C ASL 00000061)
ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D4010C ASL 00000061)
ACPI: DSDT fffe4000 0319C (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 1ffff800 00040
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ffe2000
low ram: 0 - 1ffe2000
node 0 low ram: 00000000 - 1ffe2000
node 0 bootmap 00016000 - 0001a000
(10 early reservations) ==> bootmem [0000000000 - 001ffe2000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
#3 [001fe3b000 - 001ffd2770] RAMDISK ==> [001fe3b000 - 001ffd2770]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001551000 - 0001557198] BRK ==> [0001551000 - 0001557198]
#6 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#7 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#8 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#9 [0000016000 - 000001a000] BOOTMAP ==> [0000016000 - 000001a000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ffe2
HighMem 0x0001ffe2 -> 0x0001ffe2
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001ffe2
On node 0 totalpages: 130931
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3953 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125954 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s34776 r0 d22568 u4194304
pcpu-alloc: s34776 r0 d22568 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129907
Kernel command line: root=/dev/disk/by-uuid/5501fa6d-1664-41e3-ac30-9a475cc6843d ro vga=773
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 2620840 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 509220k/524168k available (2895k kernel code, 14260k reserved, 1208k data, 408k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07e2000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB)
.init : 0xc1403000 - 0xc1469000 ( 408 kB)
.data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
.text : 0xc1000000 - 0xc12d3f1e (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1993.528 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.18 BogoMIPS (lpj=6645093)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20091214
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3988.18 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [PADA] (on)
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfed9ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfee00000-0xffb7ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xfff7ffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
pci 0000:00:1d.0: reg 20: [io 0xbf80-0xbf9f]
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
pci 0000:00:1f.5: reg 14: [io 0xdc80-0xdcbf]
pci 0000:00:1f.6: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:1f.6: reg 14: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 18: [mem 0xfcff0000-0xfcffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci 0000:02:00.0: reg 10: [io 0xec80-0xecff]
pci 0000:02:00.0: reg 14: [mem 0xf8fffc00-0xf8fffc7f]
pci 0000:02:00.0: reg 30: [mem 0xf9000000-0xf901ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-10] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: disabling [io 0x0800-0x0805] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:02: disabling [io 0x0808-0x080f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0806-0x0807] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0810-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0860-0x087f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:04: disabling [io 0xf000-0xf0fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf100-0xf1fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf200-0xf2fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf400-0xf4fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf500-0xf5fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf600-0xf6fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf800-0xf8fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf900-0xf9fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfa00-0xfafe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfc00-0xfcfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfd00-0xfdfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfe00-0xfefe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [mem 0xfa000000-0xfbffffff] because it overlaps 0000:00:1e.0 BAR 14 [mem 0xf4000000-0xfbffffff]
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
system 00:00: [mem 0x1fff0000-0x1fffffff] has been reserved
system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0880-0x08bf] has been reserved
system 00:03: [io 0x08c0-0x08df] has been reserved
system 00:03: [io 0x08e0-0x08ff] has been reserved
system 00:09: [io 0x0900-0x091f] has been reserved
system 00:09: [io 0x03f0-0x03f1] has been reserved
system 00:0f: [io 0xbf40-0xbf5f] has been reserved
system 00:0f: [io 0xbf20-0xbf3f] has been reserved
system 00:10: [mem 0xfebffc00-0xfebfffff] has been reserved
pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0x28000000-0x280003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0x28000000-0x280003ff] (PCI address [0x28000000-0x280003ff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci 0000:02:01.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
pci 0000:02:01.0: BAR 16: assigned [mem 0xf4000000-0xf7ffffff]
pci 0000:02:01.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
pci 0000:02:01.1: BAR 16: assigned [mem 0x2c000000-0x2fffffff]
pci 0000:02:01.0: BAR 0: assigned [mem 0xf8000000-0xf8000fff]
pci 0000:02:01.0: BAR 0: set to [mem 0xf8000000-0xf8000fff] (PCI address [0xf8000000-0xf8000fff]
pci 0000:02:01.1: BAR 0: assigned [mem 0xf8001000-0xf8001fff]
pci 0000:02:01.1: BAR 0: set to [mem 0xf8001000-0xf8001fff] (PCI address [0xf8001000-0xf8001fff]
pci 0000:02:01.0: BAR 13: assigned [io 0xe000-0xe0ff]
pci 0000:02:01.0: BAR 14: assigned [io 0xe400-0xe4ff]
pci 0000:02:01.1: BAR 13: assigned [io 0xe800-0xe8ff]
pci 0000:02:01.1: BAR 14: assigned [io 0xf000-0xf0ff]
pci 0000:02:01.0: CardBus bridge to [bus 03-06]
pci 0000:02:01.0: bridge window [io 0xe000-0xe0ff]
pci 0000:02:01.0: bridge window [io 0xe400-0xe4ff]
pci 0000:02:01.0: bridge window [mem 0x20000000-0x23ffffff pref]
pci 0000:02:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:02:01.1: CardBus bridge to [bus 07-0a]
pci 0000:02:01.1: bridge window [io 0xe800-0xe8ff]
pci 0000:02:01.1: bridge window [io 0xf000-0xf0ff]
pci 0000:02:01.1: bridge window [mem 0x24000000-0x27ffffff pref]
pci 0000:02:01.1: bridge window [mem 0x2c000000-0x2fffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-10]
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:02:01.1: enabling device (0000 -> 0003)
pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
pci_bus 0000:02: resource 3 [io 0x0000-0xffff]
pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xe0ff]
pci_bus 0000:03: resource 1 [io 0xe400-0xe4ff]
pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
pci_bus 0000:03: resource 3 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 0 [io 0xe800-0xe8ff]
pci_bus 0000:07: resource 1 [io 0xf000-0xf0ff]
pci_bus 0000:07: resource 2 [mem 0x24000000-0x27ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x2c000000-0x2fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1629k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1274299821.609:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 998
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, using 1536k, total 32768k
vesafb: mode is 1024x768x8, linelength=1024, pages=41
vesafb: protected mode interface info at c000:549f
vesafb: pmi: set display start = c00c5533, set palette = c00c557f
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a post-1991 82077
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata2.01: NODEV after polling detection
ata1.00: ATA-6: HTS548040M9AT00, MG2OA5EA, max UDMA/100
ata1.00: 78140160 sectors, multi 8: LBA48
ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8081N, 0108, max MWDMA2
ata2.00: configured for MWDMA2
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8081N 0108 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
udev: starting version 151
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.103
Marking TSC unstable due to TSC halts in idle
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI: AC Adapter [AC] (on-line)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SBTN]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Switching to clocksource acpi_pm
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
parport_pc 00:0e: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
iTCO_vendor_support: vendor-support=0
agpgart-intel 0000:00:00.0: Intel 845G Chipset
lp: driver loaded but no devices found
lp0: using parport0 (interrupt-driven).
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
ppdev: user-space parallel port driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (57 C)
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x9b4cb1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:012a]
yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.0: Socket status: 30000006
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others.
0000:02:00.0: 3Com PCI 3c905C Tornado at e0c6ac00.
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:012a]
yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64
usb 1-1: new full speed USB device using uhci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.1: Socket status: 30000006
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFCFF0000
[drm] register mmio size: 65536
[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] radeon: VRAM 64M
[drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[drm] radeon: GTT 64M
[drm] radeon: GTT from 0xE8000000 to 0xEBFFFFFF
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 255756 kiB.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 64M of GTT memory ready.
[drm] radeon: cp idle (0x00008383)
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
usb 1-1: new full speed USB device using uhci_hcd and address 3
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[drm] radeon: ring at 0x00000000E8000000
[drm] ring test succeeded in 1 usecs
intel8x0_measure_ac97_clock: measured 52675 usecs (2532 samples)
intel8x0: clocking to 48000
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: QDI141X1LH03
[drm] Panel Size 1024x768
[drm] Default TV standard: NTSC
[drm] 27.000000000 MHz TV ref clk
[drm] No TV DAC info found in BIOS
[drm] Default TV standard: NTSC
[drm] 27.000000000 MHz TV ref clk
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 2:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
usb 1-1: device descriptor read/64, error -71
[drm] fb mappable at 0xE0040000
[drm] vram apper at 0xE0000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
usb 1-1: device descriptor read/64, error -71
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: device not accepting address 4, error -71
EXT4-fs (sda4): mounted filesystem with ordered data mode
usb 1-1: new full speed USB device using uhci_hcd and address 5
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
psmouse serio2: ID: 10 00 64
usb 1-1: device not accepting address 5, error -71
hub 1-0:1.0: unable to enumerate USB device on port 1
eth0: setting full-duplex.
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input8
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
lspci (Is this useable info?)
[dell@linuxnas ~]$ lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
02:01.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:01.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller

I found this post on linux forums which say It's a HAL related problem.
"rmmod ehci_hcd" made it work for some of these guys Which one of them explains It's a data speed issue. Cables.., 2.0 1.0, that sort of things. Read it, I bet you'll get more out of it, It's old though.
Try removing the module, plugging the drive, check dmesg, and mount manually.
Last edited by Ekimino (2010-05-20 01:23:54)

My apple tv3 is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify

My apple tv3, serial no. C07JWBZ9DRHN is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify

You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

My MAC is not shown in My Devices in Find My iPhone web

After installing Lion 10.7.2 I've used the Find My iPhone feature to find my iPhone and my iPad. I've activate in Preferences-iCloud the Find My Mac option but my MAC is not shown in the list of my devices in the web application. Is anything more I have to do in order to this feature work? How can I know if my MAC is in the list but maybe is not possible to locate it? My MAC is connecte to a wifi network.
Thanks!!

Mine's the same. I can't locate my Mac Pro, but I can my iPhone and iPad.
I have "Find my Mac" turned on in preferences, and a picture of it appears on all my devices, and I can send a message to the Pro etc. but it just can't pick up a location.
I'm baffled.
Bob.

LMS 4 Devices added but not shown in inventory

Hello,
By reruning discovery with new seeds etc I have more devices discovered.
Howeverr they are not shown in the inventory, only in the Device Discovery Summary however.
Any help, is welcome.

Hi,
Kindly go to Inventory> Job Browsers> Inventory Collection and create new job for all the devices. Kindly note down the numbers of devices selected for the job.It should show up all the 164devices there.
Thanks,
Gaganjeet
Inventory> Job Browsers> Inventory Collection

Dolphin 4.8 mounting devices - not shown in Places

Similar Messages

Maybe you are looking for