Dolphin -- Change Terminal from Konsole [Solved]

I am running Openbox and using Dolhin as my file manager. I like the prorgram but I perfer Gnome-Terminal.
So I wanted to change the shortcut to open a terminal from Konsole to Gnome-Terminal but I can't seem to find the configuration file to change. 
Any ideas ?
Thanks in advance for your resonse.    
Last edited by jv2112 (2013-01-17 00:53:29)

jv2112 wrote:
Thank You both for your replies. I was actually looking to change the default terminal used by Dolphin itself not my openbox menu.
Like in other file managers if you select the terminal option it opens in the directory you are in. In Dolphin it is F4 but there is no option to change from 'Konsole' to any other termnal. 
PS :
qinohe -- Cool Avatar
You were not that clear..
offtopic:
Well thank you, it's Mimas, a moon circling around Saturn!
If you want to know how this 'pacman' image arose,
visit this site from NASA!
P.S. Normally I won't react in a 'Solved', but now I had to..

Similar Messages

  • Looking for a replacement for Terminal from XFCE [SOLVED]

    I'm looking for a terminal to replace Terminal from XFCE. The requirements are simple. It needs to be GTK2 based for full clipboard functionality and to not be ugly. There needs to be a right click menu to access copy/cut/paste. And I need to be able to toggle the file menu or access all functions from the mouse. LXTerminal comes very close to this except the file menu is just on and the new window launch keyboard shortcut doesn't work. I don't care either way about tabs, but a terminal launcher is necessary.
    ----> xterm, rxvt, and the derivatives that I've seen are either too ugly or too feature light. It's too bad because xterm is amazingly quick. <----
    So why not just use Terminal? There are times when it seems like there are some runaway processes in the background and it starts to lag behind the mouse when moving. I don't know if this in fact Terminal, but I'll find out soon enough. It wouldn't be surprising though; Thunar was a major headache for me.
    Last edited by skottish (2008-08-08 16:57:34)

    pressh wrote:
    skottish wrote:
    ghostHack wrote:roxterm ?
    Looks good to me. Solved.
    nah, you should give sakura a try
    Even better right click layout. Sweet!
    Last edited by skottish (2008-08-08 17:53:40)

  • How to change the default search engine? I accidentaly change it from google to yahoo, and I can't get it back. I changed my homepage too, but it isn't solved. Thanks

    dear, there.
    how to change the default search engine? I accidentaly change it from google to yahoo, and I can't get it back. I changed my homepage to google too, but it isn't solved. Thanks

    Clarification:
    I believe now you potentially lose all extensions, plug-ins when you use the new reset function, but you will let me know.
    If that is the case, your find corrupt file method maybe better. However, I reviewed the two help articles and there appear to be more files than just the delete search.json file and a possible search.sqlite file in the Firefox Profile Folder. I am confused. Then I have to find the folders. I think help articles mentioned how to find the profile containing the files, but not sure.

  • Find terminal from where the record is changed

    Dear  Experts,
    One of the user has increased the Purchae Order value and payment has been made to the party. Now our client wants to find out the terminal from where value has been changed.
    The problem is that security audit log(SM19, SM20) has not been configured here and this user id was used by 4 user.
    The value has been changed on 26 of august.
    Please help me in this regard because it is very critical thing
    Rupesh Kumar singh
    Basis consultant

    Hi Rupesh,
    Try accessing these tables via SE16 - enter the document number.
    CDHDR
    and
    CDPOS
    This wont give you the terminal number but it will certainly point out the user id used to make the changes at that particular time.
    I did try to link the tables by the tables used by STAD but then gave it up in between. If any one could carry it further, that would be a great help.
    Regards,
    Pranay

  • When I send or receive e-mail, the mail gets changed significantly from its' original form.....typestyle, size of letters, symbols, page layout, color, everything changes.....is there a way to fix that?.....

    When I send or receive e-mail (Thunderbird).....the mail gets changed significantly from its original form.....typestyle, font size, symbols, page layout, color.....everything changes.....is there a way to fix that so my the original form of the mail is not changed?.....

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Change over from traditional chinese and simplify chinese

    I am using a MacBook Pro, Hardware : 2010 Q3 product, OS : OSX 10.6  Current OS : OSX 10.7.5
    My problem is when I select writing language by using Trackpad handwriting in Traditional Chinese, I write a word in Simplify Chinese, it can give me a Traditional Chinese for selection.   But when I change over from Traditional Chinese to Simplify Chinese, I write in Traditional Chinese, it never give me a correct word in Traditional Chinese, I think it is a BUG and I have visit Genius Bar at Apple Shop, nobody can solve thie problem,

    Ahavavaha wrote:
    But when I change over from Traditional Chinese to Simplify Chinese, I write in Traditional Chinese, it never give me a correct word in Traditional Chinese
    I can see how that might not be a bug but expected behavior.
    Try asking in the Chinese Mac group:
    https://groups.google.com/forum/#!forum/chinesemac
    Also if you know Chinese well:
    https://discussionschinese.apple.com

  • Change names from ECR/ECO system status screen (cc01, cc02)

    Hi all,
    I’m working with ECM main screen (CC01, CC02…) and the names assigned in the Standard process are not meeting tour needs and some steps are missing in order to cover all the specifications.
    If in a easy way I could change the name of the system status steps ( for instance change “Convert ECR” into “Start modifications”) will be great and, if this change could be link to a type of ECR would be like a dream because this will meet all the client requirement.
    Any comment or suggestion in how to do that? User status are not valid :S
    Many thanks in advance
    Alberto

    Hi alberto,
    I think you can't change it from "Convert ECR" to "Start Modifications" but you can use create your own Statuses as required and can be control through Status Profile where in you define this. and in first screen of CC31 or CC01 you need to make this "Profile" Field as Mandatory.
    Change type can also be linked to Profile, this way your client requirement will be fulfiled.
    Hope this will solve the problem
    Regards
    Rehman

  • Creating Change request from an Issue

    Hi, all.
    We have created new transaction type for change request (SDCR  at default) and have specified it for usage in parametre CHANGE_REQUEST in DNO_CUST04.
    However, creation of a change request from a issue (problem) ignores this customisation. As has shown code research - the constant there is used.
    Whether there are to it reasons or notices in the documentation?
    Whether there was for you such problem and how you solved it?
    Regards,
    Konstantin

    You need to maintain Transaction Types Mapping. Map your target procedure type (ZDCR) to your source procedure type (e.g. SLFN or ZLFN).
    Do this in IMG task "Define Mapping Rules for Copy Control"

  • Card Images Become "Unopenable" on Notebook After Changing View From "Details" to "Medium Icons"

    I've been viewing & placing image files into folders directly from my camera card over the past few days on my new notebook. It was becoming very tedious as I had to view each image seperately to see what it was, before I had the bright idea to try to "VIEW" them differently. In the process of changing the "VIEW" from "DETAILS" to "MEDIUM ICONS", some of the the pictures which had previously been fine the few times I had taken the card in & out of the notebook, became HP Icons instead of the picture's thumbnail. I didn't realize this at first because the pictures were broken up into months (luckily), I  was going through them chronilogically, and it wasn't until I got to images from the 26th of that month that I came across this problem. I clicked the HP logo for these images and got the message "SORRY, WE CANNOT OPEN THIS PHOTO". I immediately panicked and closed the folders and took the card out to put back into my camera to see if it showed up on there. Sure enough where those images had been was replaced with a big question mark and the message "Unidentified Image" when I selected it to view. I immediately went through every picture on the camera to see if this had happened to images from other months, but it had not. I had no clue what had caused this as all the images on the card/camera had remained intact the previous times I had put the card in the notebook (I'm constantly viewing images on the camera & usually go through all of them in passing daily). I had no idea what had caused this, and was afraid to put the card back into the notebook. After trying to explain this on some camera forums I needed to know the exact messages I received trying to view those images. Put the card in, took it out, and no more pictures were effected. A day passed and I figured I could work on filing pictures from the other months until I could solve the problem. I went through the camera first, and all the other images were fine. Put the card in and was presented with the "DETAILS" view again, so I changed it from that to "MEDIUM ICONS". MISTAKE. BIG MISTAKE. The same thing happened to several pictures from that file, which I immediately saw, closed the file, and took the card out. The images which had been fine moments before were now question marks on my camera. Genius that  I am had to do it twice to figure out what did it. After that I tried changing the view back to "DETAILS", which of course didn't work.Prior to that I didn't think it was the camera, but I wasn't sure if it was the card or the notebook. I've had the camera 3 years, no problem. I've had the card 6 months, no problem. I've only had the notebook a few weeks, and had only started using the card reader a few days before this happened. Any help would be greatly appreciated as most of the pictures effected were irreplacable Christmas pictures.
    Just in case it helps my camera is a Canon PowerShot SX150 IS and the card is Wintec filemate Professional Plus 64GB.

    Thank you for responding,
                                                          I have tried copying the affected images after they began to display the problem, but they opened (or rather didn't) the same as before I copied them.
    I was using the default program to view the pictures, HP Connected Photo. However after this occurred I attempted to view them with Windows Photo viewer, with the same result.
    Unfortunately I do not have an external card (but if i knew it would restore the photos I would definitely get one).
    I don't think I have a virus, and the notebook is still so new I have the trial of McAfee running (which, for what it's worth, says "Your computer is secure". My internet service is also protected.
    As stated I was copying images from the card for several days (and taking the card out & inserting it back into my camera after each use) with no altered images showing up either on the camera or the notebook. It wasn't until I changed the way I was viewing the files from details to thumbnails (medium icons) that some of the images from that file were affected. (The pictures had automatically been seperated into files by month, so there were 6 files. Only the file with the thumbnails I switched how I was viewing had altered images. The other 5 files remained fine, until I did the same with November's file, at which time some of those images became unviewable as well).

  • How change my "from" name in emails?

    Just had Infinity BB installed. Very impressed with speed although engineer had to run an Ethernet cable from ground to first floor which has dropped performance. Am now “playing about “ with emails using BT Yahoo. When composing an email I note my “From” line always appears as J BLOGGS (Note Caps.) followed by my btinternet email address. I would like to change this to something less formal, such as my Christian name followed by the name of my business. So it would now read...
    … Joe. Causeway Art Studios. (followed by my btinternet address).
    Any ideas? I'm a newbie as you gather.
    Solved!
    Go to Solution.

    pinballwitch wrote:
    Thanks gg, yes I've done that,and the name is there fine,  but I don't want the actual email address I'm sending from to appear as well.... I want a different reply address (for a small voluntary organisation), and even though I've typed that into the relevant box, it's still showing the actual one I'm sending from.
    This worked before with my previous provider, but stopped when I switched from them to BT.  I can still use the old account but not make changes like that any more.  So I set up a new sub account for these emails, but is that maybe a problem, that it's a sub account and not my main one?  Am I asking the impossible here?
    Hi.
    As you've set all the relevant boxes including the reply-to box, and you had similar settings with the previous ISP (who were they by the way ?), then I can't see anything to change this directly.
    With your previous provider, what email address was showing against your name when you sent emails ? Did you actually have the organisation email address set in the "From" address in Outlook ? If so, you can stil do this - but you need to associate this address with your BTinternet email address. It's called address verification. See my shortcuts, link below, option 0e. It looks complicated to a certain extent, but once done you can then change the "From" address in Outlook and not need to set the "Reply-to" box.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • How do I change the "From" name connected to my email in iCloud email?

    How do I change the "From" name connected to my email messages in iCloud?

    Hi,
    Both modems are on a same network or 2 different networks ? If on TWO networks, the printer can see 2 networks and on the setup menu you have to select the new network, enter security code (if any) then pick it as default.
    Now your machines on the same network might see 2 logical printers, one offline and one online, the online is the one connected to the new modem.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Both Terminator and Konsole fail

    xterm, however, works fine.
    When I open either Terminator or Konsole, I get (where the prompt should be):
    Unable to start shell:/bin/zsh
    Additionally, when I start Konsole from xterm, on xterm, I see
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    konsole(8596)/kdecore (KPty/K3Process) KPty::open: Can't open a pseudo teletype
    konsole(8596) Konsole::Pty::flowControlEnabled: Unable to get flow control status, terminal not connected.
    Then, when I close either Terminator or Konsole after this message, my whole X session crashes.
    My DE is lxde.
    My display manager is xdm-archlinux.
    uname -a
    Linux thimm 3.18.1-3-ck #1 SMP PREEMPT Mon Dec 22 13:48:58 EST 2014 x86_64 GNU/Linux
    /etc/fstab
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    #/dev/mapper/gr-tmp /tmp ext4 defaults 0 2
    /dev/mapper/gr-home /home ext4 defaults,noatime 0 2
    /dev/mapper/gr-swap none swap defaults 0 0
    /dev/disk/by-uuid/a8a9b1e9-0fa6-40e8-be94-4d445cc63d92 /boot ext3 defaults 0 2
    /dev/mapper/gr-root / ext4 defaults,noatime 0 1
    /dev/mapper/gr-var /var ext4 defaults 0 2
    /dev/mapper/gr-vm /VM ext4 defaults 0 2
    /dev/mapper/gr-ovas /OVAS ext4 defaults 0 2
    /dev/mapper/gr-para /PA ext4 defaults 0 2
    /dev/mapper/gr-co /CO ext4 defaults 0 2
    /dev/mapper/gr-es /ESP ext4 defaults 0 2
    /dev/mapper/gr-isos /ISOS ext4 defaults 0 2
    /dev/disk/by-uuid/7107c3ca-4365-4915-967b-99aaf4549b23 /resc ext3 defaults 0 2
    mount |grep pts
    devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
    I would appreciate some guidance as to how to start troubleshooting this problem.

    Thanks for replying
    I use zsh on xterm without any problem. I use it for almost everything as a user, but for root I use bash (for fear of messing up basic configs in the system).
    $ file /bin/zsh
    /bin/zsh: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]=e144dd269482ebf8771a0a791b7f4ead10437ccd, stripped
    I have several other Arch boxen whose output after $ mount |grep pts is exactly the same as yours and have no problem whatsoever.
    So, that may be where the problem is!!
    So this computer is not mounting /dev/pts right?
    Last edited by xganesh (2014-12-27 17:03:19)

  • Change file from .tiff to .pdf?

    How do I change file from .tiff to .pdf? (I scanned in a large volume of items, and didn't realize they were not in.pdf).

    Select a file, CMD+I, and change the Open with selection. Select Change all.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • How to import a Change request from One application to another application.

    Hi,
      In SRM Dev system I have created a Change request (Transport Request) and released to the QA system.The Change request has imported successfully to the SRM QA system.
    Now the Case is:
    The Released Request in the SRM Dev system has to be Export to the CRM Dev system.
    Is it possible to Export the Released Change Request from SRM system to CRM system?
    If possible then can you provide me with the solution.
    Thanks in Advance
    Dharma

    Hi,
    Your system admin knows how to do it. System admin should define transport route. Please check it in transaction STMS.
    Regards,
    Masa

Maybe you are looking for