Domain Controller deletes user account settings and applications - windows server 2012

once in a month, when the user logs into his account, his settings and some applications get deleted. he has to install the outlook again, dropbox gets deleted, setting on the desktop disappears (files are still there) etc
I am not sure about the cause or the solution. please let me know what i can do to fix this

Hi,
All the user has the same issue?
Did the issue occur when you log into the Domain Controller?
Any event id in event viewer?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How to allow more than two users on remote desktop on windows server 2012 foundation?

i have a dell server power edge T300 with windows server 2012 foundation. I am unable to connect more than two remote desktop at once.

Hi,
Add to Brain, you cannot have more than 15 user accounts in Windows Server 2012 Foundation.
In order to access a hosted application, such as Microsoft® Office, a license for Windows Server 2012 Remote Desktop Services is required for each user account (not to exceed 15 user
accounts) that directly or indirectly uses RD Gateway to host a graphical user interface, including using Remote Desktop Connection (RDC) client. When using Remote Desktop Services, you may not install or use Remote Desktop Connection Broker or Remote
Desktop Virtualization Host role services. For more information about Remote Desktop CALs , see http://go.microsoft.com/fwlink/?LinkId=140238.
http://technet.microsoft.com/en-us/library/jj679892.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

How do I install user client access licence on Windows Server 2012

I have recently setup a Windows Server 2012 Std. I have not configured any roles yet. The server licence has been installed and activated successfully. How do I get my Windows Server CAL 2012 ( tracking ID is 15 digits) onto the server. I have google
but did not get the correct result. The closest I found was
http://technet.microsoft.com/en-us/library/cc540509(v=ws.10).aspx.
I am not too familiar with the Server 2012 display so I am not certain if I am missing something. If the CALs are not captured on the server, will this restrict user access to the 2012 server?
I thank you in advance for your assistance.

Hi,
I’m glad to hear that you have found the thread as reference. As DonPick mentioned, since these are Windows Server CALs, there is no activation nor input of any kind needed. You bought the
CALs, you have the paper, you are now licensed, there is no configuration step necessary. If there is anything else I can do for you, please do not hesitate to let me know. I will be very happy to help.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Unable to log onto domain controller with user account

Hi,
I am able to log onto my DC as domain admin. I cannot log on as myself. I do not see what I am missing in the GPO to make this happen? I am part of a server admin group and would like the server admin group to be able to log on to the domain controller to
maintain the server.
Any suggestions?
Wave~Chaser

Log on to this DC and run rsop.msc and check the following policies:
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Deny log on locally
Add your self to Allow log on locally
(in default domain controller policy - as I mentioned above) and make sure your user account not belong to any group that have Deny log on locally.
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Can't Delete User Account - On Mac Os X Server

Hi, I am running Server v 2.2.1 on Mountain Lion 10.8.3 (I don't see a community set up for this new server software so I'm asking here)
I just created a user account in the server but made a mistake and for some reason it won't let me delete the account.
Clicking on the little minus box does nothing and when I go into the "edit user" everything is greyed out accept for the "Administer the server" checkbox.
Other accounts I've created don't have this issue so I'm not sure what is going on.
Is there a way to delete this account? Maybe from the Terminal?
Any help would be greatly appreciated.
Thanks.

I figured it out. For some reason there was no admin write access to the User folders.

70-410 installing and configuring windows server 2012

I know this exam goes as credit toward a windows server 2012 mcsa. But, after passing it, will you be an mcp windows server 2012? Or do you get any other designation from passing the test?

You will have MCP, the next test will not get MCP unique for so you can download or view a page that contains all the tests you have passed (at the site
microsoft.com/mcp)
Of course after three tests you get MCSA, if you add two more will also receive MCSE.
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Adding second domain controller in Windows server 2012 R2

Hello, our primary domain controller is currently on a machine that has Windows Server 2008 R2 Standard. We are planning to setup a second domain controller as a failover to our primary domain controller. My question is, can we have a secondary domain
controller on a Windows Server 2012 R2 even if our primary domain controller is on a machine that has Windows Server 2008 R2?

I think I found the answer to my question.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx
"In Windows Server 2012, Adprep.exe is integrated into the AD DS installation process and runs automatically as needed. For example, when you install the first domain controller that runs Windows Server 2012 into an existing domain and forest, then adprep
/forestprep and adprep /domainprep automatically run and report the results of the operations.
Some organizations may prefer to run Adprep.exe separately in advance of an AD DS installation. For this reason, Adprep.exe is also included in the \Support\Adprep folder of the operating system disk.
In Windows Server 2012, there is only one 64-bit version of Adprep.exe. It can be run remotely from any server that runs a 64-bit version of Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012. The computer where you run it can be either
domain-joined or in a workgroup.
The version of Adprep.exe in Windows Server 2012 includes new syntax and parameter options in order to run it remotely. For more information, see
Adprep."
For more information about the objects and containers that are created when the schema is extended to support Windows Server 2012, see
Windows Server 2012: Changes to Adprep.exe.

Windows Server 2012 HyperV VMs becoming extremely sluggish and slow

I have recently set up a new system for a client consisting of a single Dell T320 server with Xeon E5-2350 2.2GHz 6 core cPU and 32GB of RAM. Windows Server 2012 Standard is installed on the bare metal, and runs only the HyperV role. It is not
joined to any domains.
It hosts two VMs, one a Windows Server 2012 Standard VM containing the RDS related roles acting as remote desktop server, with 10GB RAM allocated and 3 cores. Only 5 people use the terminal server concurrently.
The second VM is a Windows Server 2008 R2 based primary domain controller, with 16GB of RAM allocated and 3 cores. It runs the AD role, as well as Exchange and GFI MailEssentials 2012. Avira is also installed on this VM.
The problem is that the system will function properly for 3-4 days, then suddenly it goes into a state where a multitude of applications would start consuming inordinate amount of CPU time, and become very, very slow. Almost like the hypervisor goes
into a software emulation mode where everything runs like molasses. This affects BOTH VMs equally. For example, Exchange and GFI on the Windows 2008 R2 VM together consume about 25% CPU, most of it is spent in kernel CPU time. At the same
time, in the other Windows Server 2012 VM, svchost, Taskmgr, WMIPrvSE, LogonUI, Explorer, sqlservr, wsmprovhost etc. will all consume a total of about 70% CPU time, this time 99% of this is user time, not kernel time. When one user starts any application,
be that internet explorer, firefox or TaxPrep, the CPU spikes up to 100%.
All while nobody is using the system, the system is idle and no mails are flowing in or out of the system. A reboot of the VMs does not fix anything, even a reboot of the host server does not fix anything. When I yanked out the two power supplies
and performed a hardware diagnostic (which came back 100% OK), it booted up and the slowness was gone for 3 days, until today when it started acting up again like I described above.
One more thing, when the system behaves normally the sunspider javascript benchmark in IE10 takes 316ms to execute (average) on the HyperV host operating system. When the system goes slow like this, I pause the two VMs in HyperV then run sunspider
again, only to be greeted by an average time of 5084ms. So this clearly does not only affect the virtual machines but the host operating system as well. My gut still tells me the hypervisor is getting messed up somehow.
Any ideas? This is a major problem and I have no idea what is causing it.

We have had the EXACT same thing happen with a Dell T320 on two separate servers. The first one was running SQL Server 2008 with nothing else funny going on. It ran fine for a month or so, then it developed this slowness issue. We finally installed SQL on
a loaner box (without Hyper-V) and it worked fine. We brought the T320 back to our shop and tested the hell out of it with Dell's assistance and it was NTF. Took it back onsite and moved an SBS 2011 VM over to it. After a few days, it ground to a halt. CPU
utilization was 100%. I started shedding services, killing Exchange, Sharepoint, etc. Even stripped to the essentials, the CPU was still up in the 60-70% range.
I put a T310 out onsite and downed the guest SBS vm. I copied the HUGE vhd over to the T310 (running Server 2008r2 with the Hyper-V role) and it ran perfectly. CPU at about 2-4%, spiking to 15% occasionally.
We finally concocted a story that the USB controller was bad, so they replaced the motherboard (not the CPUs) and it all seems to be working OK now after we sunk at least 100 man-hours into the problem.
Our second one is a similar setup. T320, Server 2012, Hyper-V role, SBS 2011 Standard and a couple of member servers running basic apps. No one can find any problem and everyone acts like this is something new, although my posting comes one year after Tim's
original posting.
MCP SBSC

Licensing help needed for datacenter server with vm running windows server 2012 essentials and ten virtual desktops for remote access

NPO wants to get windows server 2012 r2 datacenter as the main operating system and then windows server 2012 r2 essentials plus 10 windows 8.1 as virtual desktops. Each desktop for one remote user running office 2013. Is there a better configuration?
In either case what licenses does the NPO need to purchase?
Bob

Hi,
For license related questions we recommend you contact Microsoft licensing specialist.
http://support.microsoft.com/kb/141850/en-us
Regards.
Vivian Wang

My mail can send out message but can't receive new e-mail? and some software(adobe illustrator cs) and applications(terminal) can't run ? but in another user account, terminal and illustrator can run.

Hi,
My Mac info:
Machine Name:          Power Mac G5
Machine Model:          PowerMac7,3
CPU Type:          PowerPC G5 (3.0)
Mail Version 2.1.3 (753.1)
My mail application can send out message but can't receive new e-mail now ? please see attached before my capture screen
and some software(adobe illustrator cs) and applications(terminal) can't run ? please see attached
but in another user account, terminal and illustrator can run.
Please kindly help to check with these problems. Thanks.

Verify and Repair disk “Data”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
Repairing volume.
Rechecking volume.
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Data was repaired successfully.
Mounting Disk
1 HFS volume checked
Repair attempted on 1 volume
1 HFS volume repaired

Use old domain controller AD user profile with new domain (profile changed)

Dear All,
I have built Win Server 2012 for Domain migration from Windows Server 2003 to Windows Server 2012. I have tested all thing on VMware including user creation and tested Domain join using power shell for Win 7 and .VBs batch file for Win XP computers all thing
are working fine.
Let 1st I introduce my current environment. I have existing Win Server 2003 domain controller (abc.com) with 130 client computers and 200 users I am going to plan migrate my current environment to Win server 2012 Domain (xyz.com) Keep in mind that Domain
name is changed but Domain Controller (Server) names are same i.e MY-PDC . I have tested domain join on multiple computers using existing clone of client computers and create all existing users using .csv file and power shell with required
credentials and OU.I am facing the user profile issue when I join domain and login with existing user which was previously the user of same computer the required profile does not login and computer creates new user profile in Document and Settings section
of Win XP.
I need your expert opinions because copy old profile data and create new outlook profile for each user is a big headache for any one. Hope you people can understand and help me in this issue.
Please provide best answer and result on priority I will be thankful to all of you.
Regards,
Arsalan

Hi Arsalan,
Please check if USMT can help you to achieve this target.
User State Migration Tool 4.0 User's
Guide
Meanwhile, please also refer to following articles and check if can help you.
How
to Migrate Windows User Profile to New Account
Keeping user old domain profile
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If anything I misunderstand or any update, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu

Can you transfer only a users account settings on a new mac?

I am wondering if you can get a new mac and transfer only the old macs user account settings without the applications or any folders of any other user. also can you transfer only that users music and pictures and everything?
Thank you,
Caleb

Migration assistant (it's an applications/Utilities) gives you an option to transfer individual accounts, applications and other data. you can choose to transfer a single account. This will transfer the whole home directory of that account. You can't pick and choose which folders in the home directory you want to migrate. if you want that kind of control - migrate by hand.

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Not Enough Hard Drive Space on my Mac Mini to Save Deleted User Account Folder: What to do?

I am no longer able to access my original user account on my mac mini because the account is corrupted and won't load. Thanks to the helpful advice I found on the internet, I was able to create a new user account and resume using my mac, but all of my old files are trapped in the old user account.
The plan was to delete the old user account, create a disk image of the old account folders, and then migrate those folders to the new user account. Unfortunately, I don't have enough disc space left on my Mac to do that. I have just under 11gb left after deleting absolutely everything I could, and I need 81gb for the old user files. The back up plan was to select the "don't change the home folder" option, but when I went to delete the account, there was no such option. The message simply read:
"The user's home folder will not be saved. To do so, you need 81.1gb of free disk space. Try emptying the trash or deleting other files on your disk, then deleting the user account. If you do not want to save the user's home folder, click delete immediately."
My only two choices were CANCEL or DELETE IMMEDIATELY. There was no "don't change the home folder" option.
So I am not sure how to proceed. Here are some questions:
1) is there a way to save the disk image directly to an external drive instead of the user's folder on the mac hard drive?
2) If I use the "delete immediately" option, will the files go into a "deleted users" folder where they can be recovered or will they just be erased from the computer and unretrievable?
3) Is there a way to use terminal to change access permission on the original user account files so that I can copy them onto an external drive or integrate them with the new user account without having to first delete the original user account?
4) In the absence of deleting the user account, will using either:
sudo chown -R `id -un` /Users/oldusername
and/or
sudo chmod -R u+rw /Users/oldusername
in Terminal allow the new user account permission to access the original user files and merge them seamlessly into my new user account? Or must I delete the original account first?
5) Is there something else I haven't thought of that would work, would be more efficient, or more effective? This wouldn't be the first time I have overthought a solution...
When considering any solutions, please keep in mind that I cannot launch the original user account as that starts the whole endless loading loop. So, while I have the password for the original user account, any solution would appear to require that I work from the new user account only, without launching the old account. Also I am a complete newbie at this. I've used Macs exclusively for 17 years but this is the first time I've had to do anything like this. Up to now, everything has always "just worked". So please be as detailed with any instructions as possible!
Any help greatly appreciated. Thanks!
Mac Mini 2ghz 1g ram running OS 10.4.11

I think ComputerFixer is correct, you should be able to drag and drop it to another drive, no worries. However, if not, you could create an disk image of it using DiskUtility and create it on a new drive. But again, I don't think that is necessary. If you have administrator rights with your new account, can you simply go into the old user account folder and drag and drop the files you want to save? I have done that as well as copy the older user account to another drive (in my case, another computer on the network) and salgage my files from there. Is that an option for you?

How to install Windows Updates on a 2012 Domain Controller w/Group Policy Settings

Hello All,
I'm having an issue installing Windows Updates on my Windows Server 2012 Standard with AD DS role, acting as a backup DC.
I have Group Policies setup for the Domain Controllers to download updates from my WSUS server but not to install them. When I go to my Windows Server 2003 R2 Domain Controller, I can install updates via the "Install Updates and Shutdown". That
option doesn't show up on the 2012 server. I can see from my WSUS server and the event viewer that the updates are being downloaded to the 2012 server........just no option for me to install the updates.
Am I just missing something or will I need to change the way my Group Policy is setup to allow installs and/or downloads? Any help would be greatly appreciated!
Tony

So I've totally removed the GPO settings for configuring updates on the Default Domain Controllers OU and I can get the Windows Server 2003 Server to get updates from Windows Updates, but the 2012 Server still won't show me how to download or install any
updates. It just states on the log-in screen that there are "Windows Updates Sign in and install important updates".
Well guess what Microsoft! I've signed in and still don't see where I can install updates!!!
I guess because you've set AU=3.
There doesn't seem to be much documented in depth about AU/WUAgent (not in the history of forever), but Lawrence and others in the WSUS forum do cover a lot of related question about the agent and also GP settings.
Lawrence has blogged a lot of detail about the registry settings which are available for AU/WU, and how some of those settings are not practically of any use since WinXP.
So, even though your question isn't about WSUS, the WSUS forum is a great place to visit for help for WUAgent etc.
Anyway, "where can I install updates?" :
on the Start screen, Search for "Windows Update"
or
Settings charm
Change PC Settings
Update and Recovery
Windows Update
or
Control Panel\System and Security\Windows Update
Some further (light) discussion on the "new" behaviour:
http://blogs.msdn.com/b/b8/archive/2011/11/14/minimizing-restarts-after-automatic-updating-in-windows-update.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Domain Controller deletes user account settings and applications - windows server 2012

Similar Messages

Maybe you are looking for