Domain did not find after 2 weeks
Hello everyone
We have both Macs and PCs with 1 Mac Server 10.4.8. The PCs have to join the domain. We created PDC with domain: MEDIER. It was working good. But new PCs could not find MEDIER after 2 weeks. So I have to stop service and restart service, then it will work again. I dont know what problem it is. Hope someone can help. Thanks
Regards
Tri
( Server Admin-Computers & Services-Windows-Settings-General)
At the beginning, we upgraded from OS Server 10.3.9 to Server 10.4.8. it did not work good at all. We decided to install new, fresh installation Server 10.4.8, and then updated to 10.4.10 now. Lookup and forward DNS are working: internal.loc = 192.168.1.3.
I tried to join MEDIER, it said that "the domain could not find domain bla bla bla, contact the administrator...". If I stop and restart the service, it could find the domain: MEDIER, and then PCs could join MEDIER without any problem. The problem is, I have to stop and restart the service after 2 weeks
Is the problem related to DNS or how to stop MEDIER from sleeping?
Thanks again
Similar Messages
-
IDoc TO File: Receiver Determination did not find any receivers at all
Hi,
We have IDoc to file scenario, where based on attributes present in IDoc we have configured different receivers.
Everything was working fine and files were getting created based on the receiver determination criteria.
But there is one change done in custom IDoc to re position the attributes.
Idoc before changes was having NAME1 and NAME2 above KATR6 and KATR7 and after change it looks like below:
So there is no change in segment and no change in mapping but the attributes KATR6 and KATR7 are used to determine the receiver.
Cache refresh is done for both ESR and ID. I have re - entered the receiver determination criteria just to ensure that change should reflect.
But still when I am triggering outbound IDoc from ECC to PI, the transaction is getting errored out with below error:
"ErrText": "Processing error = Receiver Determination did not find any receivers at all",
Can any one providee some idea what could be the reason and what is the right approach to resolve this issue.
Thanks,
VertikaHi Krupa,
I have marked your answer as helpful answer and delete of metadata wasn't required.
Reload works . But thanks for your suggestion.
Thanks,
Vertika -
I have WebLogic 32 bit installed on a Windows XP 32 bit platform. And CCB V2.2.0.
Upon startup in WebLogic, I get the following error message in the Domain Diagnostic Log file of Web Logic;
101162 User defined listener com.splwg.base.web.startup.SPLWebStartup failed: com.splwg.shared.common.LoggedException: The following stacked messages were reported as the LoggedException was rethrown: com.splwg.base.web.startup.PreloadLoginInfo.preloadFieldMetaData(PreloadLoginInfo.java:150): Unable to preload navigation keys and web pages com.splwg.base.support.context.SessionExecutable.doAsReadOnlyInCurrentSessionIfAvailable(SessionExecutable.java:54): Error caching field metainfo com.splwg.base.web.common.FieldMetaDataRepository$FieldRetriever.execute(FieldMetaDataRepository.java:99): Caught exception from SessionExecutable.execute() The root LoggedException was: Did not find base field 'EXT_REFERENCE_ID' pointed to by field 'C1_EXT_REFERENCE_ID'.
A user, ChesPlay, suggested that I install FrameWork Service Pack 10 from the Oracle MetaLink site. *(ChesPlay...thanks for your help!)*
I completed the install yesterday, but still get the same error.
First, I verified that I had already installed the Prerequisite Single Fixes 7195518. 7012092, 7284592 per SP10 install instructions.
Second, I installed the Prerequisite Single Fix 10124173 before installing Service Pack 10.
The following are the last few bug installations from Service Pack 10 and these are from my <SPLBASE>\etc\installed_fixes.txt file (I included these to show that SP10 installed OK);
10215923
10424723
10262588
10333081
11069455
10374823
10428564
11682732
9943861
9843154
10235499
I queried the ci_ut_instl database table to show the last few database updates that were installed from Service Pack 10;
10270627
9442145
8632929
10183805
8486799
9947280
10116686
ChesPlay, you asked if I had installed DB SP1, and I am thinking that this would be included inside the DB SP10 that I just installed. There was a database upgrade in FW SP10. I queried some defects that would have been corrected around the time we did the initial install and installed FW SP1, and those DB corrections are;
SR_NO
6089943
6320038
6508751
6690631
6732352
6741522
6746717
6752806
6753590
6762978
6769161
6769237
6779293
6779801
6781657
6818630
6823390
6849474
6852874
6870669
6906144
6939345
6941618
6979608
6995839
7003470
7014765
7026277
7381045
7381047
7381055
7381058
7382787
7384954
7388487
7391086
7391288
7407889
7413910
7418119
7428875
7438467
7441512
7448408
7456024
7462902
7484097
7493378
7494737
7500660
7503581
7509645
7527185
7534015
7568961
7569426
7582167
7588967
7592708
7594026
7599841
7599984
7613246
7616144
7624052
7633553
7635383
7649695
7677265
7679057
7026919
7037953
7111539
7233235
7256221
7293343
7310420
7322924
7332542
7357736
7503171
7503377
7510815
7520424
7568016
7593173
7594038
7671757
7827664
8251286
8260929
8268874
8273106
8291086
8392040
6937115
6979711
6999033
7041838
7109393
7175088
7176465
7189056
7189062
7189066
7228406
7240901
7247174
7247901
7253983
7254315
7259747
7263367
7275778
7277602
7279706
7281406
7281654
7286107
7288370
7298418
7316562
7316681
7323846
7332558
7332907
7344408
7346424
7353257
7356312
7357247
7359107
7375159
7381041
9300696
9309747
9340118
9395985
9400236
9492363
9526408
9647138
9654108
9664482
9698293
9709303
9712403
9825630
7679562
7687196
7687438
7687453
7710475
7774775
7811967
7831369
7911307
7924667
8206476
8226523
8235853
8256491
8273340
8280748
8284128
8289639
8292263
8301127
8307872
8321198
8339901
8344477
8350640
8350682
8403219
8426144
8426309
8443509
8445514
8445531
8484901
8490758
8496724
8503323
8532198
8546929
8568639
8569825
8572542
8574743
8593280
8595554
8596468
8603598
8603640
8619605
8628607
8631398
8654780
8676657
8710499
8734027
8743059
8743999
8811818
8958357
9017242
8738911
8754679
9006753
9032536
9104466
9110525
9124362
9131056
9211751
9213966
9267200
9280101
9290639
I am headed to MetaLink now for further research on the "Did not find EXT_REFERENCE_ID pointed to by field C1_EXT_REFERENCE_ID" message to see what else I might need to install. I'll update this thread if/when I figure out the problem.
Chesplay if you have another idea, or believe that there is a seperate DB SP1 on MetaLink, please advise. I was not able to find a seperate DB SP1 on MetaLink today. Thanks!For me even the issue was solved when i apply the db portion of patch 7009370. But when i log in to the application i could see ablank pages, the menus were not loading up and i was getting error:
SYSUSER - 313876-67-1 2011-03-05 23:12:11,721 [[ACTIVE] ExecuteThread: '2' for q
ueue: 'weblogic.kernel.Default (self-tuning)'] ERROR (web.dynamicui.NavMetaDataH
older) Error getting navigation info for navigation key userPortalPage
SYSUSER - 313876-67-1 2011-03-05 23:12:11,737 [[ACTIVE] ExecuteThread: '2' for q
ueue: 'weblogic.kernel.Default (self-tuning)'] ERROR (web.dynamicui.XSLTExtensio
nHelper) XSLT Extension error getting program component meta data for userPortal
Page
file:/C:/spl/CCBDEMO/splapp/servers/myserver/tmp/_WL_user/SPLWeb/yge362/war/WEB-
INF/uiXSL/tabMenu.xsl; Line #279; Column #116; com.splwg.shared.common.LoggedException:
The following stacked messages were reported as the LoggedException was rethrown
com.splwg.base.web.dynamicui.XSLTExtensionHelper.privateProgramComponentExtensio
n(XSLTExtensionHelper.java:66): XSLT Extension error getting program component m
eta data for userPortalPage
The root LoggedException was: Error getting navigation info for navigation key u
serPortalPage
file:/C:/spl/CCBDEMO/splapp/servers/myserver/tmp/_WL_user/SPLWeb/yge362/war/WEB-
INF/uiXSL/tabMenu.xsl; Line #279; Column #116; java.lang.NullPointerException
To overcome the above issue i applied the db portion of the patch 8608149 by following below steps:
1.
DELETE FROM CI_UT_INSTL WHERE SR_NO LIKE '8608149%';
DELETE FROM CI_UT_INSTL_DTL WHERE SCRIPT_FILE_NAME LIKE '8608149_RS1%';
COMMIT;
2.Apply the patch 8608149. -
Hello,
I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
Iam reading a flat file and trying to write into an XML in the same FTP server
I have a 1 to 1 Mapping as follows
And my Content Conversion at Sender side Looks like this
After running the configuration Iam getting following error message
Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
My System is the SAP Netweaver Process Intgration 7.4 single Java stack
Do you have any idea how to fix this issue?
Many thanks in advance
KhadimHi evrybody
I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
<ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
<Recordset>
<header>
<gesellschaft>03</gesellschaft>
<filiale>000</filiale>
<satzart>11</satzart>
<datum>00000000</datum>
<kennzeichen>1</kennzeichen>
</header>
</Recordset>
</ns:hartgeldbest_ERP_KT>
The issue is on detrmining the RECEIVER in the Main-XML
<sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
<sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
<sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/>
<sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
</sap:Sender>
<sap:Receiver>
<sap:Party agency="" scheme=""/>
<sap:Service/>
</sap:Receiver>
<sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
</sap:Main>
Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
Any idea?
Thx
Khadim -
Did not find GlassFish server in Jdeveloper
hi
I did not find GlassFish web server in the list of web server in Jdeveloper ! how can I add this web server to the list for future use
thanksHi Timo,
I follow the sample did by shay see link
https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_to
i install adf-essentials.zip in C:\glassfish3\glassfish\domains\domain1\lib.
I successfully deploy same application did by Mr Shay, Web EE application in the server but when I try to deploy my .war ADF web application in the server an error appears :
Exception while loading the app : java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack. Pour plus d'informations, consultez le fichier server.log.
for more detail this is below the server.log file
is there another thing that i have to fix it ?
thanks for your help
[#|2012-10-06T19:36:26.292+0400|SEVERE|glassfish3.1.2|org.apache.catalina.core.ContainerBase|_ThreadID=17;_ThreadName=Thread-2;|ContainerBase.addChild: start:
org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack
at org.apache.catalina.core.StandardContext.start(StandardContext.java:5332)
at com.sun.enterprise.web.WebModule.start(WebModule.java:498)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:917)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:901)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:733)
at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:2018)
at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1669)
at com.sun.enterprise.web.WebApplication.start(WebApplication.java:109)
at org.glassfish.internal.data.EngineRef.start(EngineRef.java:130)
at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:269)
at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:301)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:461)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
at org.glassfish.admin.rest.ResourceUtil.runCommand(ResourceUtil.java:214)
at org.glassfish.admin.rest.ResourceUtil.runCommand(ResourceUtil.java:207)
at org.glassfish.admin.rest.resources.TemplateListOfResource.createResource(TemplateListOfResource.java:148)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jersey.spi.container.JavaMethodInvokerFactory$1.invoke(JavaMethodInvokerFactory.java:60)
at com.sun.jersey.server.impl.model.method.dispatch.AbstractResourceMethodDispatchProvider$ResponseOutInvoker._dispatch(AbstractResourceMethodDispatchProvider.java:205)
at com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:75)
at com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:288)
at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:108)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:84)
at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1469)
at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1400)
at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1349)
at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1339)
at com.sun.jersey.server.impl.container.grizzly.GrizzlyContainer._service(GrizzlyContainer.java:182)
at com.sun.jersey.server.impl.container.grizzly.GrizzlyContainer.service(GrizzlyContainer.java:147)
at org.glassfish.admin.rest.adapter.RestAdapter.service(RestAdapter.java:148)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack
at org.apache.catalina.core.StandardContext.addListener(StandardContext.java:2743)
at org.apache.catalina.core.StandardContext.addApplicationListener(StandardContext.java:1966)
at com.sun.enterprise.web.TomcatDeploymentConfig.configureApplicationListener(TomcatDeploymentConfig.java:235)
at com.sun.enterprise.web.TomcatDeploymentConfig.configureWebModule(TomcatDeploymentConfig.java:94)
at com.sun.enterprise.web.WebModuleContextConfig.start(WebModuleContextConfig.java:274)
at com.sun.enterprise.web.WebModuleContextConfig.lifecycleEvent(WebModuleContextConfig.java:172)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:149)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:5329)
... 62 more
Caused by: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack
at org.glassfish.web.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1509)
at org.glassfish.web.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1359)
at org.apache.catalina.core.StandardContext.loadListener(StandardContext.java:4806)
at com.sun.enterprise.web.WebModule.loadListener(WebModule.java:1599)
at org.apache.catalina.core.StandardContext.addListener(StandardContext.java:2740)
... 69 more
|#]
[#|2012-10-06T19:36:26.294+0400|WARNING|glassfish3.1.2|javax.enterprise.system.container.web.com.sun.enterprise.web|_ThreadID=17;_ThreadName=Thread-2;|java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack
java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:921)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:901)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:733)
at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:2018)
at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1669)
at com.sun.enterprise.web.WebApplication.start(WebApplication.java:109)
at org.glassfish.internal.data.EngineRef.start(EngineRef.java:130)
at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:269)
at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:301)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:461)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
at org.glassfish.admin.rest.ResourceUtil.runCommand(ResourceUtil.java:214)
at org.glassfish.admin.rest.ResourceUtil.runCommand(ResourceUtil.java:207)
at org.glassfish.admin.rest.resources.TemplateListOfResource.createResource(TemplateListOfResource.java:148)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jersey.spi.container.JavaMethodInvokerFactory$1.invoke(JavaMethodInvokerFactory.java:60)
at com.sun.jersey.server.impl.model.method.dispatch.AbstractResourceMethodDispatchProvider$ResponseOutInvoker._dispatch(AbstractResourceMethodDispatchProvider.java:205)
at com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:75)
at com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:288)
at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:108)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:84)
at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1469)
at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1400)
at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1349)
at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1339)
at com.sun.jersey.server.impl.container.grizzly.GrizzlyContainer._service(GrizzlyContainer.java:182)
at com.sun.jersey.server.impl.container.grizzly.GrizzlyContainer.service(GrizzlyContainer.java:147)
at org.glassfish.admin.rest.adapter.RestAdapter.service(RestAdapter.java:148)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Thread.java:619)
|#]
[#|2012-10-06T19:36:26.305+0400|SEVERE|glassfish3.1.2|javax.enterprise.system.tools.admin.org.glassfish.deployment.admin|_ThreadID=17;_ThreadName=Thread-2;|Exception while invoking class com.sun.enterprise.web.WebApplication start method
java.lang.Exception: java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack
at com.sun.enterprise.web.WebApplication.start(WebApplication.java:138)
at org.glassfish.internal.data.EngineRef.start(EngineRef.java:130)
at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:269)
at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:301)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:461)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
at org.glassfish.admin.rest.ResourceUtil.runCommand(ResourceUtil.java:214)
at org.glassfish.admin.rest.ResourceUtil.runCommand(ResourceUtil.java:207)
at org.glassfish.admin.rest.resources.TemplateListOfResource.createResource(TemplateListOfResource.java:148)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jersey.spi.container.JavaMethodInvokerFactory$1.invoke(JavaMethodInvokerFactory.java:60)
at com.sun.jersey.server.impl.model.method.dispatch.AbstractResourceMethodDispatchProvider$ResponseOutInvoker._dispatch(AbstractResourceMethodDispatchProvider.java:205)
at com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:75)
at com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:288)
at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:108)
at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
at com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:84)
at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1469)
at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1400)
at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1349)
at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1339)
at com.sun.jersey.server.impl.container.grizzly.GrizzlyContainer._service(GrizzlyContainer.java:182)
at com.sun.jersey.server.impl.container.grizzly.GrizzlyContainer.service(GrizzlyContainer.java:147)
at org.glassfish.admin.rest.adapter.RestAdapter.service(RestAdapter.java:148)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Thread.java:619)
|#]
[#|2012-10-06T19:36:26.307+0400|SEVERE|glassfish3.1.2|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=17;_ThreadName=Thread-2;|Exception while loading the app|#]
[#|2012-10-06T19:36:26.342+0400|SEVERE|glassfish3.1.2|javax.enterprise.system.tools.admin.org.glassfish.deployment.admin|_ThreadID=17;_ThreadName=Thread-2;|Exception while loading the app : java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack|#]
[#|2012-10-06T19:36:26.603+0400|INFO|glassfish3.1.2|org.glassfish.admingui|_ThreadID=19;_ThreadName=Thread-2;|Une exception s'est produite :Erreur lors du déploiement : Exception while loading the app : java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack. Pour plus d'informations, consultez le fichier server.log.|#]
Edited by: fakhri_tn on Oct 6, 2012 8:51 AM
Edited by: fakhri_tn on Oct 6, 2012 8:55 AM -
Hi,
We are facing a problem which implies bad response time from the WL server.
Our configuration is : Sun E4500, Solaris2.6, Oracle 7.3.4, WL oci driver,
no perf pack, Javasoft 1.1.7B_05 vm on server side and IBM 1.1.7B on client
side (W98 clients).
When multiple users connect to the server (let's say from 15 simultaneous
connections) and work on our application, after few mins, the server process
logs and outputs tons of messages like :
Mon Nov 15 16:12:26 GMT 1999:<E> <RJVM> Ignoring message from a previous
generation: JVMMessage from 8803290290807054313C146.100.8.34
to -6807808847876022584C146.100.100.84 with CMD_ONE_WAY, prtNum=5, ack=30,
seqNum=3151
and
Got heartbeat for -6807808847876022584/-1838914476/0/9209 but did not find
reference
Got heartbeat for -6807808847876022584/-1838914476/0/8979 but did not find
reference
This is strangely related to a real degradation of the WL server response
times and sometimes to 'PeerGoneExceptions' thrown to the client (while the
server is still alive...).
This happens either for connections on the LAN or on the WAN (frame relay
network) so I don't think this is network related. As of now, weblogic
support told us not to care about it but after analysing the messages, there
seems to be a real problem here :
What seems to happen is :
- The server considers that the client is dead so it's closing the
connection. Eventually, the DGC cleans up references that were held by this
client.
- The server recieves a query from the 'still alive client' and re-opens the
connection with the SAME id.
- If there is a heartbeat from a DGC cleaned up object, the DGC informs that
it 'did not find reference'.
- It ignores the messages from the previously closed connection and tries to
re-establish everything.
We desperately need some feed back on what is causing the server to close
the connection while the client is still alive. I've seen somewhere in this
list that there are some internal parameters in the WL server
('weblogic.system.idlePeriodUntilTimeout' and
'weblogic.system.periodLength') which indicates the WL server when to
consider a client as 'dead'. This is defaulted to 1 min for the first and to
4 for the second which implies that there must be at least 4 minutes during
which the client doesn't emmit 'heartbeats' for the server to know it is
alive.
few remarks :
1/ the client is not swapping nor GCing too long so the client vm is
available to emmit these heartbeats.
2/ we couldn't reproduce it in our test environement except when making the
client swap for minutes which is not the case in the production env.
3/ this really seems related to multiple clients connected simultaneously to
the server.
Thanks a lot for your help.
Vincent Vandenschrick
Obbisoft.Michael,
We are running WL Server 404. This is the version we were advised to use for
production. We are not using the performance pack because when we turn it
on, the server behaves correctly for the first 15 mins of use and then,
stops accepting new connections and even closes the existing ones. This
behaviour seems to happen only when the server is used by multiple
concurrent users. So the only "stable" configuration we found to run the
server is Javasoft 1.1.7B (Sunsoft's jdk 1.1.7 produces a core dump after a
few minutes use) + perf pack disabled.
We have support calls open for most of these issues but I thought I would
ask the group to benefit from its experience.
Thanks for your help.
Vincent.
Obbisoft.
Michael Girdley a écrit dans le message
<[email protected]>...
Vincent,
What version of the Server are you running? Why are you not using the
performance pack?
Thanks,
Michael Girdley
BEA Product Manager
Vincent Vandenschrick <[email protected]> wrote in message
news:[email protected]...
Hi,
We are facing a problem which implies bad response time from the WLserver.
Our configuration is : Sun E4500, Solaris2.6, Oracle 7.3.4, WL oci
driver,
no perf pack, Javasoft 1.1.7B_05 vm on server side and IBM 1.1.7B onclient
side (W98 clients).
When multiple users connect to the server (let's say from 15 simultaneous
connections) and work on our application, after few mins, the serverprocess
logs and outputs tons of messages like :
Mon Nov 15 16:12:26 GMT 1999:<E> <RJVM> Ignoring message from a previous
generation: JVMMessage from 8803290290807054313C146.100.8.34
to -6807808847876022584C146.100.100.84 with CMD_ONE_WAY, prtNum=5,
ack=30,
seqNum=3151
and
Got heartbeat for -6807808847876022584/-1838914476/0/9209 but did notfind
reference
Got heartbeat for -6807808847876022584/-1838914476/0/8979 but did notfind
reference
This is strangely related to a real degradation of the WL server response
times and sometimes to 'PeerGoneExceptions' thrown to the client (whilethe
server is still alive...).
This happens either for connections on the LAN or on the WAN (frame relay
network) so I don't think this is network related. As of now, weblogic
support told us not to care about it but after analysing the messages,there
seems to be a real problem here :
What seems to happen is :
- The server considers that the client is dead so it's closing the
connection. Eventually, the DGC cleans up references that were held bythis
client.
- The server recieves a query from the 'still alive client' and re-opensthe
connection with the SAME id.
- If there is a heartbeat from a DGC cleaned up object, the DGC informsthat
it 'did not find reference'.
- It ignores the messages from the previously closed connection and triesto
re-establish everything.
We desperately need some feed back on what is causing the server to close
the connection while the client is still alive. I've seen somewhere inthis
list that there are some internal parameters in the WL server
('weblogic.system.idlePeriodUntilTimeout' and
'weblogic.system.periodLength') which indicates the WL server when to
consider a client as 'dead'. This is defaulted to 1 min for the first andto
4 for the second which implies that there must be at least 4 minutesduring
which the client doesn't emmit 'heartbeats' for the server to know it is
alive.
few remarks :
1/ the client is not swapping nor GCing too long so the client vm is
available to emmit these heartbeats.
2/ we couldn't reproduce it in our test environement except when makingthe
client swap for minutes which is not the case in the production env.
3/ this really seems related to multiple clients connected simultaneouslyto
the server.
Thanks a lot for your help.
Vincent Vandenschrick
Obbisoft. -
I did not find the right place for my question but Is Apple's products are shipped to the Gulf States by Aramex ?
An absolute URL will be a complete URL, it traces from the abosulte root of a file's location on a server...
http://www.thesite.com/assets/images/Front_Page_Rotating_Banner/banners.xml
A relative URL is anything short of including the http://domain..., and is read relative to wherever the file using it exists
assets/images/Front_Page_Rotating_Banner/banners.xml
In Flash files though, relative links need to be specified relative to the HTML page that embeds the swf. So if the swf is in a different folder than the html page that embeds it, the swf's targeting must be adjusted as if it were actually in the html file's folder. -
I deleted my iphoto app on my iphone 5s (iOS8.3) by mistake. And I did not find the same app in the App Store. How can I recover it?
This Apple doc can help you get familiar with the Photos app that the iPhone uses:
Migrating from iPhoto for iOS to Photos on iOS 8 - Apple Support -
I did not find facetime in iphone5. How to install please help me to install facetime
I did not find facetime in iphone5. How to install please help me to install facetime
What country did you buy the phone in?
What iOS version does it have?
As has been said, Facetime is banned in some coutnries and so is not available on iPhones and cannot be insatlled.
Also, before iOS7, the iPhone had no Facetime icon, it was built into the Contacts App. -
I have a problem with itunes account did not find a solution.
Good morning
I have a problem with itunes account did not find a solution.
The problem: your apple id has been Dasabld
I can not if download applications from the iTunes store
Hoping to help me solve the problem
Note my English is very weak
I want to re-activate the iTunes account
Thank youTo Contact iTunes Customer Service Use this Link...
Apple Support iTunes Store Contact -
Did not find repository information for controller
Hi Experts,
We are getting following error in Production system. Could you please tell what can be the root cause behind it. I know when someone deploys this error comes. But in Production No one is deploying any Application.
Please tell me what can be any other problem.
Exception occured during processing of Web Dynpro application /material_wd/ChangeRawMeridianApp. See exception stacktrace for details.
[EXCEPTION]
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Did not find repository information for controller ChangePackManualCompView
at com.sap.tc.webdynpro.progmodel.components.Component.getController(Component.java:572)
at com.sap.tc.webdynpro.progmodel.components.Component.getController(Component.java:548)
at com.sap.tc.webdynpro.clientserver.uielements.adaptbase.AbstractAdapter.findViewElement(AbstractAdapter.java:124)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.handleUIElementEvent(HtmlClient.java:2037)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.updateEventQueue(HtmlClient.java:550)
at com.sap.tc.webdynpro.clientserver.phases.TransportIntoDataContainerPhase.execute(TransportIntoDataContainerPhase.java:48)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:97)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:512)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1549)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1363)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:154)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppProcessing.doService(DispatchHandlerForAppProcessing.java:35)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:114)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:80)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:618)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:649)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingPortal(ApplicationSession.java:584)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:311)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:743)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:258)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:259)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToDispatcherContext(ExecutionContextDispatcher.java:146)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.dispatch(ApplicationHandle.java:275)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:71)
at com.sap.tc.webdynpro.portal.pb.impl.LocalApplicationProxy.sendDataAndProcessActionInternal(LocalApplicationProxy.java:962)
at com.sap.tc.webdynpro.portal.pb.impl.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:297)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1638)
at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:361)
at com.sap.portal.pb.PageBuilder$PhaseListenerImpl.doPhase(PageBuilder.java:2062)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:220)
at com.sap.tc.webdynpro.clientserver.phases.PortalDispatchPhase.execute(PortalDispatchPhase.java:52)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:97)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:512)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1549)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1363)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:154)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppProcessing.doService(DispatchHandlerForAppProcessing.java:35)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:114)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:80)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:618)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:649)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:570)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:309)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:743)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:258)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:259)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToDispatcherContext(ExecutionContextDispatcher.java:146)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:486)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:243)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)Hi,
Some one might be deployed WDJ application with controller name ChangePackManualCompView which is already exist in some other application with diff name space
Did not find repository information for controller
Thanks,
Sreeni. -
I did not find my submitrequest id while start the GLLEZL interface from backend.
Hello experts
I have write a package to start the interface for General Ledger-Import(GLLEZL).
CREATE OR REPLACE Package body XXGL_INT_BUDGET_PKG is PROCEDURE UPLOAD_BUDGET_JV(P_BUDGET_ID IN NUMBER) IS lv_request_id NUMBER; irun_id number; errbuf VARCHAR2(2000); BEGIN SELECT gl_journal_import_s.NEXTVAL INTO irun_id FROM DUAL; dbms_output.put_line(irun_id); INSERT INTO gl_interface_control (status, set_of_books_id, je_source_name, group_id, interface_run_id) VALUES ('S', 1001, 'Spreadsheet', null, irun_id); /* Launch the concurrent request */ lv_request_id := fnd_request.submit_request( 'SQLGL', 'GLLEZL', '', '', FALSE, to_char(irun_id), '1000', 'NO', '', '', 'NO', 'NO', 'Y', chr(0), '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', ''); dbms_output.put_line('req_nu - '||lv_request_id); IF (lv_request_id = 0) THEN errbuf := fnd_message.get; fnd_file.put_line(FND_FILE.Log, errbuf); gl_message.write_log('LEZS0001'); IF (fnd_concurrent.set_completion_status('ERROR', errbuf)) THEN NULL; END IF; ELSE gl_message.write_log('LEZS0000', 1, 'REQ_ID', to_char(lv_request_id)); IF (fnd_concurrent.set_completion_status('NORMAL', NULL)) THEN NULL; END IF; END IF; IF lv_request_id = 0 THEN UPDATE XXGP_GL_BUDGET_STG SET attribute1 = 'ERROR IN RUNNING PAYABLE IMPORT PROGRAM',attribute2 = lv_request_id,status='ERROR' WHERE BUDGET_ID =P_BUDGET_ID; ELSE UPDATE XXGP_GL_BUDGET_STG SET attribute2 = lv_request_id, attribute1 = 'PROCESSED',status='PROCESSED' WHERE BUDGET_ID=P_BUDGET_ID; END IF; end UPLOAD_BUDGET_JV; Procedure xx_glbudget_int_prc(p_budget_id number,errbuf out varchar2,Retcode out varchar2) is cursor BUDGET_CUR IS SELECT a.BUDGET_ID,a.BUDGET_NAME,a.FIN_YEAR,a.BUDGET_FREQUENCY,a.BUDGET_TYPE,a.ORG_ID,a.BUDGET_CATG,a.BUSINESS_LINE,a.COST_CENTER, a.BUDGET_AMOUNT,a.CREATED_BY,b.LINE_NUMBER,B.LINE_ID, b.STATE,b.BUDGET_ACTIVITY,b.PROJECT,b.AMOUNT,b.WD_TOWN,b.CODE_COMBINATION_ID, b.STATE_NAME,b.CODE_COMBINATION FROM XXGPIL_BUDG_HDR a,XXGPil_budg_lines b where a.budget_id=b.budget_id and a.budget_id=p_budget_id; /*AND APPRVL_STATUS='Approved'*/ lv_status varchar2(50); lv_sob_id Number(15); lv_user_je_source_name varchar2(25); lv_user_je_category_name varchar2(25); lv_cur_code varchar2(15); lv_actual_flag varchar2(1); lv_err_flag varchar2(2); lv_flag varchar2(2); l_fnd_user number(15) := 5581; BEGIN BEGIN for rec in budget_cur loop insert into XXGP_GL_BUDGET_STG(status, set_of_books_id,User_JE_Source_name,user_je_category_name,currency_code, actual_flag,ACCOUNTING_DATE,DATE_CREATED,CREATED_BY,entered_dr,entered_cr, accounted_dr,accounted_cr,segment1,segment2,segment3,segment4,segment5,segment6,segment7,segment8,segment9,segment10,BUDGET_ID,LINE_ID) values('NEW','1001','Spreadsheet','Budget','INR','A',trunc(sysdate),trunc(sysdate),rec.created_by,rec.amount,rec.amount,rec.amount,rec.amount, rec.ORG_ID,rec.STATE,rec.BUSINESS_LINE,REC.BUDGET_ACTIVITY,REC.COST_CENTER,'000000','0000','000000','000000','00000000',REC.BUDGET_ID,REC.LINE_ID); end loop; END; /* END OF INSERTING DATA FROM XXGP_BUDG_HDR AND LINES TABLE TO XXGP_GL_BUDGET_STG TABLE */ DECLARE CURSOR GL_CURR IS SELECT status, set_of_books_id,User_JE_Source_name,user_je_category_name,currency_code, actual_flag,ACCOUNTING_DATE,DATE_CREATED,CREATED_BY,entered_dr,entered_cr, accounted_dr,accounted_cr,segment1,segment2,segment3,segment4,segment5,segment6,segment7,segment8,segment9,segment10 FROM XXGP_GL_BUDGET_STG where status='NEW'; BEGIN FOR rec in GL_CURR LOOP lv_flag := 'A'; lv_err_flag := 'A'; BEGIN SELECT distinct Status into lv_status from XXGP_GL_BUDGET_STG Where status = 'NEW'; EXCEPTION When no_data_found Then lv_status := null; lv_flag := 'E'; lv_err_flag := 'E'; FND_FILE.PUT_line(FND_FILE.LOG,'The status is not correct so change the status'); FND_FILE.PUT_line(FND_FILE.LOG,'The data is inserting'|| lv_status ); END; BEGIN SELECT set_of_books_id into lv_sob_id from gl_sets_of_books where set_of_books_id=rec.set_of_books_id; Exception When no_data_found Then lv_sob_id:=null; lv_flag := 'E'; lv_err_flag := 'E'; FND_FILE.PUT_line(FND_FILE.LOG,'The SOB is not correct change SOB ID'); End; FND_FILE.PUT_line(FND_FILE.LOG,'The data is inserting'|| lv_sob_id ); BEGIN SELECT user_je_source_name into lv_user_je_source_name FROM GL_JE_SOURCES WHERE user_je_source_name=rec.user_je_source_name; EXCEPTION WHEN no_data_found THEN lv_user_je_source_name := NULL; lv_flag := 'E'; lv_err_flag := 'E'; FND_FILE.PUT_line(FND_FILE.LOG,'The SOURCE NAME is not correct change It'); END; FND_FILE.PUT_line(FND_FILE.LOG,'The data inserting is'|| lv_user_je_source_name ); BEGIN SELECT user_je_category_name INTO lv_user_je_category_name FROM GL_JE_CATEGORIES where user_je_category_name=rec.user_je_category_name; EXCEPTION When no_data_found Then lv_user_je_category_name:=NULL; lv_flag := 'E'; lv_err_flag := 'E'; FND_FILE.PUT_line(FND_FILE.LOG,'The Category name is not correct Change it'); FND_FILE.PUT_line(FND_FILE.LOG,'The data inserting is'|| lv_user_je_category_name ); END; BEGIN SELECT currency_code into lv_cur_code from FND_CURRENCIES where currency_code=rec.currency_code; Exception When no_data_found Then lv_cur_code:=null; lv_flag := 'E'; lv_err_flag := 'E'; FND_FILE.PUT_line(FND_FILE.LOG,'The Currency code is not correct '); End; FND_FILE.PUT_line(FND_FILE.LOG,'The data inserting is'|| lv_cur_code); BEGIN SELECT distinct ACTUAL_FLAG into lv_actual_flag from XXGP_GL_BUDGET_STG where budget_id=p_budget_id and status='NEW' and actual_flag in ('A','B','E'); Exception When no_data_found then lv_actual_flag := null; lv_flag := 'E'; lv_err_flag := 'E'; FND_FILE.PUT_line(FND_FILE.LOG,'The Flag is not correct'); END; FND_FILE.PUT_line(FND_FILE.LOG,'The dat inserting is... '|| lv_actual_flag); IF lv_flag = 'A' THEN INSERT into GL_INTERFACE ( STATUS, SET_OF_BOOKS_ID, USER_JE_SOURCE_NAME ,USER_JE_CATEGORY_NAME, CURRENCY_CODE,ACTUAL_FLAG, ACCOUNTING_DATE, DATE_CREATED,CREATED_BY, ENTERED_DR,ENTERED_CR, ACCOUNTED_DR,ACCOUNTED_CR,segment1, segment2, segment3, segment4, segment5) VALUES ( lv_Status, lv_sob_id, lv_User_JE_Source_name, lv_user_je_category_name, lv_cur_code,lv_actual_flag,rec.ACCOUNTING_DATE, rec.DATE_CREATED, 1318,rec.entered_dr, rec.entered_cr, rec.accounted_dr,rec.accounted_cr, rec.segment1, rec.segment2, rec.segment3, rec.segment4, rec.segment5); END IF; --call to start General-Import Journals interface-- lv_flag :=null; lv_err_flag:=null; END LOOP; UPLOAD_BUDGET_JV(p_budget_id); --COMMIT; END; End; END XXGL_INT_BUDGET_PKG;
Following is the code i used to run the package:
DECLARE
L_errbuf
varchar2(240
L_Retcode
varchar2(240
XXGL_INT_BUDGET_PKG
.XX_GLBUDGET_INT_PRC(101001,L_errbuf,L_Retcode
DBMS_OUTPUT.PUT_LINE
(L_errbuf||' AND '||L_Retcode
I did not find my request in oracle applications GL responsibility.
Please help.
Thanks in advance.
YashWelcome to the Apple Community.
Unless you mistakenly logged into his account then the most probable explanation is that he is using your ID. As for yours not showing up, have you enabled Find my phone on your device.
The best thing to do would be to change your password, this will stop him seeing any of your information. Of course this would cause a problem for him if he is using your account since he will get locked out of using his devices when you do this. It could be interesting, he may need to admit what he's been doing and ask you to release his devices so he can use them. -
System did not find a valid bill of material
Hi All,
I have a requirement in which the client needs to supress the standard SAP message(information) which appears at the time of creation/change of sales order.
Message :The system did not find valid bill of material.
I am working on user exit : MV45AFZZ--> USEREXIT_MOVE_FIELD_TO_VBAP.
Could you please help me with any structure/table where we can pass any parameter field in order to supress this message?
Thanks
KishanXVBAP for detail table
vbap for header table.
also,you need to use user
exit MV45AFZB USEREXIT_SOURCE_DETERMIN -
I did not find iPhoto in mac book pro
i bought a mac pro and i did not find the backages of iphoto and imovie
It would be helpful if you indicated the exact MBP you have.
If it is a new MBP it should be included. Check the App store account and download them. If there is a problem, give Apple support a call. (all new MBPs come with free 90 day telephone support)
Ciao. -
Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I want the solution quickly
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.
Maybe you are looking for
-
TS4062 my iPhone suddenly will no longer sync using a USB cable to my desktop computer
When I connect my iPhone V to my desktop to sync, I hear the tones that my computer saw the iPhone connect on the USB port. However, iTunes no longer sees the phone and will not sync anymore. HELP.
-
Hello to the Board I'd be most grateful is someone could please help me get my wireless connection up and running on my HP dv2000. I have installed network manager which connects fine when using wired connection. When I click the network manager ico
-
CRM Ondemand- R14-Change Fields in the Related information Applet
Could some one help me as how could I change the display fields in the related applet eg. I am in Company (Account) --> Contact applet and I want to change the display values in the child Contact list applet.Please guide me with config steps. Thanks
-
Help w/ BorderFx for iPhoto
I download BorderFx for iPhoto 2011 and I see it the file on my hard drive, but for some reason it is not showing up in iPhoto as an export option. I tried reinstalling it and restarting my computer and nothing. Any help is much appreciated. Lori
-
Can you help me find my special characters?
I have used special characters without any hitch in the past. But now I can't bring them up at all. Not in Pages, or in Mail. Can anyone suggest a solution? I'm using a rather old 12" iBook G4.