Domain file does not open my iWeb websites after upgrading to Mavericks

I just upgraded to mavericks so i could use Media Composer to edit my new movie.
I backed up my computer and saved my domain file (which is over 1 gig large, as it has several websites I manage)
I went back to my original CD of iLife and re-installed iWeb
I then copied my backup of my domain file onto the library>application support>iWeb folder
iWeb program opens
but my website and their pages/files do not show on the left hand menu.
I have read on here that i need iWeb 09 (version 3.0) instead of iWeb 08 (version 2.0) but I cannot find such version in the apple website
When I check for upgrades it looks like  my iWeb 2.0 (from my iLife 08) is the latest version.
Can someone help?
In the icon of the domain file which I backed up I see an image of the last page I updated before my back up.
I am assuming all the info is there but for some reason Mavericks is not allowing iWeb to see them?
Thanks in advance!

To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Optionsmenu to bring the this window:

Similar Messages

  • Outlook 2011 does not contact my kpn server after upgrading to mavericks

    Outlook is unable to contact my kpn server (mail) after i started using maverisck.
    Anyone else having the same problem and knows a solution for it?

    To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
    delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Optionsmenu to bring the this window:

  • When I click PDF file, the file does not open and  installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

    When I click PDF file, the file does not open and  installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

    Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

  • CS5: double-click on file does not open the file

    If Photoshop is closed, double-click on a file will always successfully launch Photoshop and open the picture.
    If Photoshop is running, double-clicking on a file will activate Photoshop, but very often the file does not open. It works from time to time though, and that seems to be on a random basis.
    Opening a file through the Open command will always work.
    I am working with 10.6.3 on a loaded Mac Pro.
    Did anybody experience this difficulty? Any help would be appreciated, before I take more drastic measures like reinstalling the software of worse than that. I've already done the usual maintenance operations.

    Marian Driscoll wrote:
    Caustic waltz, while brief, may have hit the nail on the head. If you do not want to continue this thread, you can search the forum for existing posts about Snow Leopard and file-program association confusion. Snow Leopard changed some things and that might be your issue.
    More simply, do your image files have extensions? (.PSD, .JPG, etc...)
    Hello Marian:
    While browsing through my Adobe account, I saw that you took the time to leave a comment two days ago. While it did not solve my problem, I will mark your comment as "helpful" for several reasons. It could have been a cause. And I will add politeness, courtesy and language precision. I'm an old guy and I quite value those elements.
    True, Snow Leopard changed changed the way files are associated to applications. Thank God! Here in our small office, we do a lot of cross-platform transfers and finally it works seamlessly. A good description of the new file identification system can be found here.
    Now, here are the reasons why Snow Leopard cannot be put at fault in my case:
    • If Photoshop CS5 is not launched, double-clicking on any psd, tiff or jpeg file will launch it and open properly.
    • If Photoshop CS5 is already running, double-clicking on any psd, tiff, or jpeg file will activate Photoshop CS5 but will not open.
    This points at either a bug or damaged Photoshop CS5, or maybe a damaged OS. Don't forget that out of maybe a hundred apps, this is the first time I meet with that problem. Of course, the easier course, but by no means guaranteed to work, is to presume that Photoshop CS5 is damaged or that its installation did not work properly. So I did the following things:
    • I deactivated Photoshop CS5 and uninstalled it.
    • I ditched all remaining files related to CS5, CS4, CS3, CS2, CS... yes I know, but then you know as well as I do0 that getting really rid of Photoshop is a daunting task. It took me almost two hours, but I am reasonably sure that the cleaning job was complete.
    • I reinstalled Photoshop CS5.
    Now everything works just fine at least for the time being. Time will tell, of course, but I think that the problem is solved.
    Regards

  • My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
    It seems to be Apple bug.
    Thanks for you efforts

  • Cant open doc files from the server on MacBook Air after upgrading to Maverick

    Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

    Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
    I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
    I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
    I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

  • ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

    iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

    Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
    That sounds like the probable cause you cannot add contacts.
    Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps).  Also contacts sync has nothing to do with iCloud behavior.  The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere.  Specific syncs are not relevant.

  • ITunes music not playing in iPhoto slideshow after upgrading to Maverick....Why?

    iTunes music not playing in iPhoto slideshow after upgrading to Maverick....Why?

    Yes, the tracks were purchased in the iTunes store. I'm sure that DRM is the culprit. Seems like an obvious answer now that I think about it.
    Thanks for the help.
    Mark

  • The jsp file does not open the new login window but opens the source code.....plz help

    When i try to log in to the log in link at the site https://efp.bpcl.in the log in page does not open but the firefox wants to ask with which program the firefox should open the file and when we give firefox or internet explorer than it opens the source code.Plz help...

    Those files are send as application/octet-stream and that makes Firefox display a download dialog.
    http://developer.mozilla.org/en/docs/Properly_Configuring_Server_MIME_Types

  • PDF files does not open in IE 8

    When I click on a link on a web page which is to open a pdf file in acrobat reader, it does not open and gives me a error mesage
    The instruction at "0x02d96433" referenced memory at "0x00000000". The memory could not be read
    and then it opens a blank new window.

    Hi,
     Maybe you can refer to the following link
    to try to solve your problem, thanks.
    http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html
    | SQL PASS Taiwan Page |
    SQL PASS Taiwan Group
    |
    My Blog

  • XSLT Mapper file does not open in design view

    XSLT mapper file in the composites exported from weblogic EM as a jar and imported in JDeveloper 11.1.14 does not open in design view. There is no option of design view itself in the tab structure. It is viewable only in source view.
    Please suggest, how do I view the desgn view of the xslt mapper?
    Thanks,
    Promiit

    When you export composites from Weblogic EM in jar format, the resulting files are differently formatted from what was used for deployment.
    So, basically, the XSLT file, you are trying to open in Jdeveloper has lost the "mapSources" and "mapTargets" sections, which are generally present in the header section of the jdeveloper-generated XSLT file. Try to manually hand-crack those sections and you should be good to go.
    Hope it helps !

  • In Dropbox, mobile index.html file does not open in Ipad with ios7

    Before upgrading to ios7 the index.html file opened to text.  Ios7 was to correct this, but the file will not open in a browser.

    I don't think this is a Flash Player problem, but possibly something wrong on your website.
    Try asking in the Dreamweaver forum.

  • Double clicking Illustrator (.ai) file does not open a file with opened app.

    Hello,
    I have an Illustrator CS5 (15.0.2) running on Windows 7 Pro. Here are the symptoms: when double clicking the Illustrator file once the application is already open, the file will not open. You will see an hourglass for a few seconds, but no file contents are displayed. However, if I were to close Illustrator application and then double click on the file, Illustrator will open the file correctly. Additionally, if I go to File -- Open and manually select the file, it also opens the file correctly. Only double clicking the file once the Illustrator application is already open does not work.
    Has anyone seen this issue and knows how-to fix it?

    Right click on a .ai file and choose properties, check to see what application is set to open .ai files. Try running in 32 bit mode.

  • Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

    I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

    Linda Feltner wrote:
    > I cannot import or open vector files in Freehand 10. I
    just get large
    > Xs instead of the image. I have a MAC OS 10.3.9,
    Freehand 10. I'm
    > trying to import some small files that are either .ai or
    .eps files
    > (all are vector) that open fine in Illustrator 10 (so I
    know they
    > work), but I can't use them in that program. I've tried
    adjusting in
    > Freehand Preferences the 'convert editable EPS files" ,
    on and off. I
    > tried adjusting the 'Embed...." selection on and off.
    Can anyone tell
    > me what thing I'm doing wrong. I have two files, they
    are map
    > boundaries, that need to scale and adjust their color
    and line width
    > over an aerial map. This can't be difficult, but I must
    be
    > overlooking something. Many thanks in advance. Linda
    >
    Freehand can't convert EPS files into editable vectors. I
    usually run
    EPS files through Illustrator and then into Frehand. If you
    don't have
    Illustrator you can convert the EPS into a PDF and that
    Freehand will
    sometimes convert into editable vectors (though it does
    involve a lot
    more clean up than going through Illustrator.)

  • SMS does not open in iphone 3g after installing os4

    After installing OS4, the SMS box does not open for hours. I end up trying 80-100 times before it opens. I have tried restoring the phone and re-installing. Also notified apple help desk. I bought this phone in India for USD800. The so called upgrade has rendered my phone useless. Never again will ever buy an Iphone. Feel like smashing this trash on jobs' head......

    It's funny how multitasking doesn't work on the 3G iPhone with iOS 4, but it works PERFECTLY on a jailbroken iPhone running OS 3 (and with previews!) Pathetic.

Maybe you are looking for

  • Can you change the color of a row in a SUD

    Is it possible to change the color in a selected row in a SUD? I have multiple tables in my SUD were the user can select multiple rows from each table. The problem is that when the user selects rows in another table the last one selected in the previ

  • CS4 cutting and pasting from illustrator expands appearance

    I'm working within CS4 taking a few simple vectors and pasting into ID, Everything seems to work except a few images which the strokes are converted to fills. The illustrator file has multiple artboards but other items cut and paste perfectly. Is the

  • Transfer iphoto library from MacBook to iMac

    I need to know the best way to move my iphoto library from my MacBook to my iMac. I have over 4000 pictures on my MacBook, and I tried to upload them to MobileMe but it takes forever the way I am doing it. (I am probably not doing it correctly, I hav

  • "Lock table overflow" error msg when trying to change a repot program

    hi ABAP experts, We are getting the following error msg "Lock table overflow Choose 'Display object' or 'Cancel'.". Click the question mark on the same error msg window, then the detailed error msg would like this: Message no. MC603 Diagnosis This ta

  • Migrating SVN Settings to SQL Developer 3.1EA3

    I had SVN set up in SQL Developer 2 and it was working just fine. When I installed SQL Developer 3, I migrated the settings from SQL Developer 2, but the SVN settings did not move over with it. In addition, when I attempt to set up SVN in SQLDev3, it