Domain has no valid mail exchangers

Hello
I am not receiving my collegues email's. Instead they bounce back to them saying that the domain has no valid mail exchangers.

Take a screenshot of the error message and post it here,
Who provides your email?

Similar Messages

Follow up - DNS (internal domain has same name as external website)

Hi,
I am following up with on previous blog entry about resolving an domain internal name to an external website found here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4d97325b-ff3a-4f46-ba6e-dc3f4ff978e1/dns-internal-domain-has-same-name-as-external-website
On October 30, 2014
HayashiTech provided a response suggesting the use of netsh interface portproxy on the DC's to resolve this issue. There has been no feedback to this suggestion and I am very curious what opinions are out there for this suggestion as it appears to be the
best option provided yet.
Thank you in advance as well for all the great guidance I have found provided by Ace and his followers.

Interesting question. I've not seen that solution before, but having done a test on my lab setup it certainly seems to work as expected. Eg, using :
netsh interface portproxy add v4tov4 listenport=80 listenaddress=dc1.abc.com connectport=80 connectaddress=www.abc.com
on my DC where I've setup a working external domain name with the www record pointing to the website, and the non-www record pointing to the DC, requests to the non-www address are successfully being redirected to the www address (after confirming it didn't
happen prior to adding the portproxy).
So on the face of it that does look like a workable solution. I haven't used it myself in anger obviously, but the two downsides I can think of immediately to this solution are :
1) This operates as a proxy, so unlike the IIS method that Ace mentioned where it would tell the client to go to the www address instead (so the client connects direct), this method keeps your DC acting as a middle man, eg all communications to that address
go through your DC rather than direct from the client to the website. Depending on what they're doing on the website this may or may not be an issue for you.
2) Since the client is continuing to connect to the DC throughout, if you ever did need the have something on the DC responding to port 80 then you could have issues. That said, according to
https://technet.microsoft.com/en-us/library/cc731068(v=ws.10).aspx the portproxy listenaddress can be a FQDN rather than IP, so that could mitigate any issues there.

I am creating a form on LiveCycle Designer and I am trying to create a form that has a e-mail submit button. When the butten is utilized it attaches the form to the e-mail in an plain text .xml format rather than the pdf format. Is there a quick fix?

I am creating a form on LiveCycle Designer and I am trying to create a form that has a e-mail submit button. When the button is utilized it attaches the form to the e-mail in an plain text .xml format rather than the pdf format. Is there a quick fix?

Hi,
You have the choice between xml or pdf, in later versions of designer you can choose with a dropdown on the email button Object palette, the "Submit As";
In earlier version you had to edit the XML Source and change the format from xml to pdf (or vice-versa);
Regards
Bruce

" ! Cannot send message - Message has no valid recipient "

Android version 4.4.4
Sony Xperia Z3 Compact
When I use the pre-installed Messaging app I get the following error message for some but not all contacts
" [!] Cannot send message
Message has no valid recipient "
I can't work out what is is about the contacts that results in the error but today I had the error when trying to text to an iPhone and a Blackberry. Just to be clear, some contacts produce that error message every time; some contacts work properly every time.
It's becoming more than a little frustrating and at the moment I'm wondering why did I not just get another iPhone?
Anyway, all suggestions gratefully received...

It gets a bit weirder.
Taking the contact I tried to text earlier:
If I go to the contacts app, and select the messaging icon next to his mobile number, the text message which I compose is sent properly.
If I open the messaging app, select write new message and select his name, the text is not sent and the error message appears.
It's not at all satisfactory.

My Mac has stopped receiving mail. Mail is still coming through to my iPhone and my wife's iPad but is not appearing on my mac. I have mail from today on the phone but nothing newer than 18 Feb on the Mac. I have not touched any settings. Can anyone adv

My Mac has stopped receiving mail. I have a mac.com address. Mail is still coming through to my iphone and my wife's ipad but nothing is coming through to my imac.I have mail from half an hour ago on the phone but nothing newer than 18 Feb on the mac. Everythng was working fine until recently and I have not touched any settings! Can anyone help?

So I tried something else recently and it seems to have fixed the issue. My mail is now getting new mail again and refreshing after waking from sleep without having to restart mail. Give it a try and hopefully it will help you too.
First, make sure your Mailbox List is visible (Shift + Control + M). Then select all of your inboxes, mailboxes, and folders (not just the root folder for nested folders, make sure to select them all). Then under the "Mailbox" menu, select "Rebuild."
It may take a while to rebuild them all if you have a lot, but like I said it seems to have done the trick for me. I hope that proves to be more of a long-term solution.

How to use MobileMe family email acct created at my iMac on iPad 1 that already has free yahoo mail set up on it?

How to establish and use MobileMe family email acct created at my iMac on iPad 1 that already has free yahoo mail acct set up on it.

I don't know what the limit is for the number of email accounts that can be accessed with the iPad's Mail app if there is a limit, but it is definitely more than one email account.
Add the MobileMe account - at Settings > Mail, Contacts, Calendars, select Add Account. Select MobileMe and follow the prompts.

How do I edit and save a word document that has been e-mailed to my ipad

How do I edit and save a word document that has been e-mailed to my ipad and then re-send

Use the paid version (install and activate) of Microsoft Word.
https://itunes.apple.com/sg/app/microsoft-word-for-ipad/id586447913?mt=8

Oracle vm 2.2.1 domain has crashed

Hello
We are facing actually a problem. We have installed ovm 2.2.1 and installed 3 (A15, A16, A17) windows virtual machines on a HP Proliant DL380 G7 server.
A17 machine restart unexpectedly when the load is high on the network
Part of logs are:
/var/log/messages:
Sep 25 15:22:18 xxxxx avahi-daemon[7250]: Interface tap23.0.IPv6 no longer relevant for mDNS.
Sep 25 15:22:18 xxxxx avahi-daemon[7250]: Leaving mDNS multicast group on interface tap23.0.IPv6 with address fe80::c40f:d1ff:fe14:ce79.
Sep 25 15:22:18 xxxxx avahi-daemon[7250]: Withdrawing address record for fe80::c40f:d1ff:fe14:ce79 on tap23.0.
Sep 25 15:22:18 xxxxx kernel: xenbr1: port 2(tap23.0) entering disabled state
Sep 25 15:22:18 xxxxx kernel: device tap23.0 left promiscuous mode
Sep 25 15:22:18 xxxxx kernel: type=1700 audit(1348586538.915:90): dev=tap23.0 prom=0 old_prom=256 auid=4294967295 ses=4294967295
Sep 25 15:22:18 xxxxx kernel: xenbr1: port 2(tap23.0) entering disabled state
Sep 25 15:22:20 xxxxx kernel: xenbr1: port 3(vif23.0) entering disabled state
/var/log/xen/xend.log:
[2012-09-25 15:22:18 8235] WARNING (image:490) domain 10_xxxxx: device model failure: pid 11149: died due to signal 11; see /var/log/xen/qemu-dm-10_xxxxx.log
[2012-09-25 15:22:19 8235] WARNING (XendDomainInfo:1907) Domain has crashed: name=10_xxxxx id=23.
[2012-09-25 15:22:19 8235] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=23
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2230) Destroying device model
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2237) Releasing devices
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2250) Removing vif/0
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vif, device = vif/0
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2250) Removing vbd/768
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/768
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2250) Removing vbd/832
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/832
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2250) Removing vbd/5696
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/5696
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2250) Removing vbd/2048
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/2048
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2250) Removing vbd/5632
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/5632
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2250) Removing vfb/0
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vfb, device = vfb/0
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2250) Removing console/0
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = console, device = console/0
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:117) XendDomainInfo.create_from_dict({'vcpus_params': {'cap': 0, 'weight': 256}, 'PV_args': '', 'features': '', 'cpus': [[], [], [], [], [], [], [], [], [], [], [], []], 'paused': 0, 'domid': 23, 'shutdown': 0, 'VCPUs_live': 12, 'PV_bootloader': '/usr/bin/pygrub', 'actions_after_crash': 'restart', 'vbd_refs': ['0b8eb7e0-91cb-1dd8-93ba-92b1a3ff26b3', 'cd42c91a-1f15-053e-78c4-d2ea9876e6d9', '16e4af8e-048d-7be9-5fc1-e14070ff3551', '4b836ae6-2352-73f0-94e8-b570764113b4', '9a5ce3cb-8a63-60ed-c8b1-ef00d666fe06'], 'PV_ramdisk': '', 'memory_dynamic_min': 8589934592L, 'name_label': '10_xxxxx', 'VCPUs_at_startup': 1, 'HVM_boot_params': {'order': 'c'}, 'platform': {'videoram': '4', 'hpet': '0', 'stdvga': '0', 'vnclisten': '0.0.0.0', 'loader': '/usr/lib/xen/boot/hvmloader', 'vncconsole': '1', 'serial': 'pty', 'vncunused': '1', 'xen_platform_pci': '1', 'monitor': '0', 'boot': 'c', 'rtc_timeoffset': -967, 'vncpasswd': 'XXXXXXXX', 'pci': [], 'pae': '1', 'vpt_align': '1', 'hap': '1', 'viridian': '0', 'acpi': '1', 'localtime': '0', 'timer_mode': '0', 'vnc': '1', 'nographic': '0', 'pci_msitranslate': '1', 'apic': '1', 'usb': '0', 'guest_os_type': 'default', 'device_model': '/usr/lib/xen/bin/qemu-dm', 'keymap': 'fr', 'pci_power_mgmt': '0', 'xauthority': '//.Xauthority', 'isa': '0'}, 'PV_kernel': '', 'console_refs': ['db501a0b-36a5-a080-dab2-d42bace0b21b', 'eba3a0c2-a3ff-00cf-4e40-7c6b433801a1'], 'online_vcpus': 12, 'blocked': 0, 'on_xend_stop': 'ignore', 'memory_static_min': 0, 'HVM_boot_policy': 'BIOS order', 'shutdown_reason': 3, 'VCPUs_max': 12, 'start_time': 1348534061.3324931, 'memory_static_max': 8589934592L, 'actions_after_shutdown': 'destroy', 'on_xend_start': 'ignore', 'crashed': 0, 'memory_dynamic_max': 8589934592L, 'actions_after_suspend': '', 'is_a_template': False, 'PV_bootloader_args': '-q', 'is_control_domain': False, 'uuid': 'c33d113b-46b3-91d3-0984-8c8b192e23c3', 'cpu_time': 22146.567213627, 'shadow_memory': 76, 'dying': 0, 'vcpu_avail': 4095, 'notes': {'SUSPEND_CANCEL': 1}, 'other_config': {}, 'auto_power_on': False, 'running': 0, 'actions_after_reboot': 'restart', 'vif_refs': ['ee5890ab-345b-479b-1504-f3a9405d4dbf'], 'target': 0, 'vtpm_refs': [], 's3_integrity': 1, 'devices': {'cd42c91a-1f15-053e-78c4-d2ea9876e6d9': ('vbd', {'uuid': 'cd42c91a-1f15-053e-78c4-d2ea9876e6d9', 'bootable': 0, 'devid': 832, 'driver': 'paravirtualised', 'dev': 'hdb', 'uname': 'file:/var/ovs/mount/58F85FD535AC460495D6CD8D56EF0E94/running_pool/10_xxxxx/JDEdwards.img', 'mode': 'w'}), 'eba3a0c2-a3ff-00cf-4e40-7c6b433801a1': ('console', {'location': '14', 'devid': 0, 'protocol': 'vt100', 'uuid': 'eba3a0c2-a3ff-00cf-4e40-7c6b433801a1', 'other_config': {}}), 'ee5890ab-345b-479b-1504-f3a9405d4dbf': ('vif', {'bridge': 'xenbr1', 'mac': '00:16:3E:03:AF:B3', 'devid': 0, 'type': 'ioemu', 'uuid': 'ee5890ab-345b-479b-1504-f3a9405d4dbf'}), '4b836ae6-2352-73f0-94e8-b570764113b4': ('vbd', {'uuid': '4b836ae6-2352-73f0-94e8-b570764113b4', 'bootable': 0, 'devid': 2048, 'driver': 'paravirtualised', 'dev': 'sda', 'uname': 'file:/var/ovs/mount/58F85FD535AC460495D6CD8D56EF0E94/running_pool/10_xxxxx/Backup.img', 'mode': 'w'}), 'db501a0b-36a5-a080-dab2-d42bace0b21b': ('vfb', {'vncunused': 1, 'other_config': {'vncunused': 1, 'vncpasswd': 'XXXXXXXX', 'vnclisten': '0.0.0.0', 'vnc': '1'}, 'vnc': '1', 'uuid': 'db501a0b-36a5-a080-dab2-d42bace0b21b', 'vnclisten': '0.0.0.0', 'vncpasswd': 'XXXXXXXX', 'location': '0.0.0.0:5901', 'devid': 0}), '0b8eb7e0-91cb-1dd8-93ba-92b1a3ff26b3': ('vbd', {'uuid': '0b8eb7e0-91cb-1dd8-93ba-92b1a3ff26b3', 'bootable': 1, 'devid': 768, 'driver': 'paravirtualised', 'dev': 'hda', 'uname': 'file:/var/ovs/mount/58F85FD535AC460495D6CD8D56EF0E94/running_pool/10_xxxxx/System.img', 'mode': 'w'}), '16e4af8e-048d-7be9-5fc1-e14070ff3551': ('vbd', {'uuid': '16e4af8e-048d-7be9-5fc1-e14070ff3551', 'bootable': 0, 'devid': 5696, 'driver': 'paravirtualised', 'dev': 'hdd', 'uname': 'file:/var/ovs/mount/58F85FD535AC460495D6CD8D56EF0E94/running_pool/10_xxxxx/MSSQL.img', 'mode': 'w'}), '9a5ce3cb-8a63-60ed-c8b1-ef00d666fe06': ('vbd', {'uuid': '9a5ce3cb-8a63-60ed-c8b1-ef00d666fe06', 'bootable': 0, 'devid': 5632, 'driver': 'paravirtualised', 'dev': 'hdc:cdrom', 'uname': '', 'mode': 'r'})}, 'PV_superpages': 0})
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2327) XendDomainInfo.constructDomain
[2012-09-25 15:22:20 8235] DEBUG (balloon:181) Balloon: 3208900 KiB free; need 4096; done.
[2012-09-25 15:22:20 8235] DEBUG (XendDomain:452) Adding Domain: 24
[2012-09-25 15:22:20 8235] DEBUG (XendDomainInfo:2528) XendDomainInfo.initDomain: 24 256
Any idea ???

if it is really urgent, contact Oracle support. you are paying for it.
here you are not paying for any body. so be patient for volunteers responses.
we cannot simply understand why performance will be degraded after upgrade.there could be many factors involving.
metalink provides good doc to debug this problem. please go through it.
about memory increasing and all, we cant decide on that.
generate AWR report and use ADDM and follow those recommendations.
If you dont know how to generate statspack report or AWR report dont ask here,instead search in this forum (before asking) or in google.

"Files shared by these updates has no valid signature" How can I download I-tune software update

I have a problem with installing the version 5 of the I-Pad software. It says "Files shared by these updates has no valid signature. It will not be installed.
Thanks,
Annie

Which "software updates" are you trying to download? For iTunes? iPod Nano? Did you download the Windows version?

The latest update of Mail over the weekend has stopped my Mail from Working

The Latest update of mail has stopped my Mail from launching.
It comes up to tell me that it needs to import my Mail and then says - An error occurred during the import. Make sure you have enough available space in your home folder and try again.
I have plenty of space more than 150gig.
I have also tried deleting the com.apple.mail.plist and the Mail folder to get a new instalation but it still says the same thing!
Can anyone help please?

What update of Mail? Do you mean the 10.7.2 System update? And if so did you download and install the Combo Update?

The 'reply' and 'new message' bar has disappeared from mail on my iPad since I upgraded my Macbook Pro from OSX10.5 to 10.6. How do I get it back?

The 'reply' and 'new message' bar has disappeared from mail on my iPad since I upgraded my Macbook Pro from OSX 10.5 to 10.6. How can I get it back?

Updating your Mac's OS X version won't have affected how the Mail app (I assume that it's the Mail app that you are using, not Safari) shows on your iPad. If you don't have the menu bar showing in the Mail app then try closing the Mail app via the iPad's multitasking bar and see if it shows when you re-open it : iOS: Force an app to close
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Into my download stack which appears to be a Facebook login page to someone who is not me but has my e/mail as the primary account,should I be concerned?

I have clicked on a link received in my e/mai which has put a download into my download stack which appears to be a Facebook login page to someone who is not me but has my e/mail as the primary account,should I be concerned?

I would do the following just to be safe.
Change your email password so anyone trying to use your email address won't be able to or delete that email address from where ever you got it after getting a new one.
I would trash the download.

Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.

I have bopped around the forums here for a while now, and while other people seem to have had the same problem as I am having in the past, I come to find that all of the solutions that have worked for others, do not in fact, work for me.
I am running Flash Professional CS6 On an Acer Aspire. 4 Gigs of RAM, 500 Gigs of HD.
The exact problem that I am having is as follows:
I record a sound bit in Audacity, Export the sound as and MP3 File on my main computer Hard Drive.
go to File>Import>Import to Library, I locate the file that I had created, then select it to be imported to my Library.
I then create a new layer in my timeline, Label it as sound, place a new key frame into the timeline layer at the place in the animation that i hope the sound would start, set the audio sync to stream instead of event, then press CTRL+ENTER, which initiates the Test Movie function.
At this time, the "Output" box Pops up and it states,
"Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored."
No sound is played and i cannot, for the life of me, figure out why. I have tried all the troubleshoots that i can find online. I checked the publishing settings and nothing is being Overridden, I've attempted to untick the "export device sounds" option, but it is grayed out and cannot be toggled. I have attempted switching the MP3 format sound clip to a WAV format sound clip. I have attempted to re-recording the sound clip and re-importing the clip to the library. I have checked my computers speakers and everything is in working order and i have even checked to see if other projects sound works.
I pulled up a previous project that i had finished a while back that had loads of sound imported the exact same way and it all works exactly as i expect it too. The sound plays, there is not "Output" box claiming an issue. It seems that the issue, whatever it might be, is stuck to this project itself.
I have even started a new project, imported and placed both the MP3 and the WAV files into the sound layer created, CTRL+ENTER, and it works just fine without problem.
If there is anything that i might have accidentally messed up in this projected that you know about, like settings that may have been changed that would cause such an annoying and seemingly unfixable issue, please let me know. I really do not want to loose this project over such an utterly stupid error.

I've moved your question to the Flash Pro CC forum.

Using Access/VBA to tell if a PDF has a valid e-signature in it?

I'm using VBA in Access 2010. Is there a way to find out if a PDF document has a valid e-signature in it?
I'd also like to be able to do the same thing in Outlook 2010, but Access is the main thing...
ajw

Hi
>> Is there a way to find out if a PDF document has a valid e-signature in it?
I'd also like to be able to do the same thing in Outlook 2010, but Access is the main thing...
As far as I know, Access and Outlook did not provide such method. But I think you are able to achieve this goal through some 3<sup>rd</sup> party PDF component.
Hope this will help you
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cant Download Firefox because it has no valid digital signature

When I try to download firefox 4.0 I can either run or save the setup file, when I "Run" I get an error message saying I cannot download because the creator (FireFox) has no valid digital signature, when I download the setup file to my desktop and try to run from there I get the error telling me the file is Corrupt?

ok no problem so what i did was i went to the cmd prompt and typed in ipconfig( to get there on vista type cmd in the search in the start window then press enter, in xp type cmd in the run box.) when you press enter you will then need to scroll down and check out what your ip address is. proper ip addresses end in something like ...1.1 or 0.1 if it has any other number then that you need to reset your ip address in your network settings which can be accesed in control panel. and if you have the option click the box that says get ip address automatically. hope that works!

Domain has no valid mail exchangers

Similar Messages

Maybe you are looking for