Domain Level

What domain level does the domain need to be for you to be able to sign in with a domain account on a Windows Technical Preview for Enterprise pc? I installed Windows technical preview for enterprise on a pc and joined it to our domain which is 2003.
When I log onto the pc it doesn't create a profile, it only creates a Temp profile.

Yes, we have Windows Small Business Server 2003 and the domain level is set to 2003. So after joining the Windows Technical Preview for Enterprise PC to the domain it only creates a temp profile not a legit user profile.

Similar Messages

Domain Level and Backup AD as VM?

We're currently running Windows 2012 R2 Essentials (25 users license default) as the DC. We're thinking to have the 2008R2 as the secondary (backup) DC. Questions are:
1. We have AD recycle bin enable, would it cause any issues lower the domain level to 2008R2?
2. Can 2008R2 run as a VM on a Hyper-V (the host is 2008R2 and part of the domain, but not DC)?
Thank you,

Yes you can run a VM and promote it as a Domain Controller, however if your domain / forest functional level is set to Windows Server 2012 then you cannot have a Windows Server 2008 R2 as a domain Controller. For this you need to have Windows Server 2008
R2 domain functional Level.
Domain Functional Level and Forest Functional level cannot be downgraded. if it's already set to Server 2012 functional level then you cannot downgrade it to 2008 R2. Please go ahead and check what's ur Forest & Domain functional Level
https://technet.microsoft.com/en-us/library/understanding-active-directory-functional-levels(v=ws.10).aspx
https://msdn.microsoft.com/en-us/library/cc753104.aspx
https://msdn.microsoft.com/en-us/library/cc730985.aspx
Nirmal Madhawa Thewarathanthri
Sorry but you are wrong. I just lowered the levels to 2008R2.

Built-In Domain Level Groups dont have permissions on domain they should on 2012

Hello,
First this is a brand new domain environment with everything running server 2012 datacenter edition.
Second I've never seen anything like the following occur in a domain environment. What I had is what appears to be a bad 2012 AD structure however so far all AD tests come back good. The problem is the built-in domain level groups do NOT offer any level
of access that they should. For example if I add a user in the administrators group, they don't have any permissions that group is supposed to have. THe same with every other builtin, backup operators, server operators, account operators and on and on. The
only way a user gets that level of access is if I add them into the domain admins group. As you can imagine this is crazy and not a solution for my help desk crew. (having them all be domain admins that is) So while I could very well use delegation, I need
to find out why my builtin groups don't function as they should. Anyone have any ideas on what to check or where to look? I'm at the point of opening a case with Microsoft on this.
Thanks in advance

Because those builtin groups AREN'T domain level groups in the way you're thinking. The Administrators group on the server gives users administrator permissions on the server, but that doesn't mean permissions on the entire domain.
If you look in the user list in ADUC you'll see that while Domain Admins are a Global security group, Administrators is only a local group, eg local to the server (or more accurately since they no longer have local details, to domain controllers), so doesn't
grant permissions to anything outside of the domain controller. On all non DC's the machines have their own local administrators group which is independent of the domain one, and can have different memberships.
So if you only need a user to have permissions to the DC then administrators is fine, but if you need them to have access to the entire network, eg other servers and workstations, then they need to be members of domain admins. If you only want them
to have limited permissions then you need to grant those permissions either via a global/universal group, or by adding them to the relevant local group on each machine they need access to.

Domain level security issue with InfoPath Form

I have followed the article “Submitting Data from InfoPath 2007 to a SharePoint List” which can be found at
http://msdn.microsoft.com/en-us/library/cc162745.aspx.
But instead I am using SharePoint and InfoPath 2010.
I get the following error after deploying and running the form with its security level set to domain.
“A query to retrieve form data cannot be completed because this action would violate cross-domain restrictions. If this form template is published to a SharePoint
document library, cross-domain access for user form templates must be enabled under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint
Central Administration.”
How do I get this form working on the server and client using domain level security?
Extra Note: On an additional not the form works fine in SharePoint and InfoPath designer when the security level is set to Full Trust.

Hi, Is this possible over a SharePoint "LIST"? I'm hitting brick walls and can't set the Security level on my form at all. Everything that I'm reading refers to Document Libraries but nothing about SharePoint List. It seems that this should work over a list,
but I'm hitting brick walls all the way around. Here is a copy of the question that I posed below under Todd.Wilder's post:
Hi,
Following this forum question/comment I am attempting to set the security on my Infopath form to Full Trust. But, I don't have the Security and Trust option. I can set the Trusted Location through the Trust Center but I can't find anywhere to set security.
I am using InfoPath 2010. What am I missing? Everything that I'm reading says that this is the problem and my error message is exactly like SomeGuy's message. One more piece to this is...this is a form over an Existing SharePoint List. I've found that I can
see the Security if I start InfoPath and start a New Blank Form, but by editing the form from a SharePont list, the option to edit Security is not there. HELP!!
I am following the instructions below that come from:
http://msdn.microsoft.com/en-us/library/ee526352.aspx
The InfoPath form designer automatically selects the appropriate security level (either Restricted or Domain) based on the features that you are using in the form. The security setting is always as restrictive as possible, starting at Restricted, to help
ensure a greater level of protection for you and your data. Users can manually override this automated setting to select a level of security that is more appropriate for the form by following these steps:
Click the File tab, and then click Form Options on theInfo tab.
In the Categories list, click Security and Trust.
Uncheck the Automatically determine security level (recommended) check box.
Select the desired security level.
Thank you,
~Tina~
~Tina~

How to get the domain level values in web ui pick list

Hi Gurus,
I was added one field through EEWB transaction and i was maintained the values in domain level.now my requirement is i was added this field in web ui.but i don't know how to get the values which are we maitained in domain level. pls send me the solution it is very needful for me..
Regards,
Bixamaiah.B

Hi Bussa,
Refer to the documentation on drop-down Boxes in UI here:
CRM Web Client UI Framework [original link is broken]
This should help you, but do get back if you face any issues in implementing the same.
Regards,
Padma Guda

2003 forest/domain level

I am currently looking at upgrading our domain from 2003 to 2012. I currently have 4 domain controllers spread out and all replication is healthy. I have two 2003 domain controllers and two 2008rs domain controllers. I need to know what
is the best practice for promoting a 2012r2 server to a DC and would that cause log on issues?
I've read some articles online that state all the current domain controllers should be fully updated before bringing in a 2012 domain controller. Can someone point me in the right direction? Are there articles I can read regarding this?
Thank you

Hi
CRMNoon,
If you want to have a 2012 forest and domain level you need to have 2012 DC's only.
Make sure your domain is healthy. Then when promoting a server 2012 R2 to a DC, you need to consider the current environment and which domain controllers are for the FSMO roles placement.
http://community.spiceworks.com/how_to/57636-migrate-active-directory-from-server-2003-to-server-2012-r2
Here is the link for Active Directory Migration from Windows Server 2003 to Windows Server 2012 R2:
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Know issues for upgrading Domain Controllers to Windows Server 2012 R2
https://technet.microsoft.com/en-us/library/hh994618.aspx#BKMK_KnownIssues

Constrained Delegation for MBAM Web User with 2003 Domain Level?

Hi,
i installed MBAM 2.5 in our environment and now stopped at the point where i should configure constrained delegation for the mbam web application pool account. I cannot find the delegation Tab in the user properties within Active Directory. Our domain is
(unfortunately) still running Windows Server 2003 Domain Level. Is it maybe related to this? Within my test environment (Domain Level 2012 R2) it is working fine.
Is there any other chance to configure constrained delegation in my situation?
Thanks
Stefan

I found an older MSDN blog post that may help in this situation. It states that the delegation tab does not show up until there is at least one value set in the servicePrincipaName attribute.
Delegation tab in ADUC not available until a SPN is set
Hope this helps,
David
MDOP on the Springboard Series on TechNet

ACS and Domain Level

Hello All,
Since I recently updated my MS AD domain lever from 2008 to 2008 R2, my ACS AD authentication no longer works. It appears the Cisco client does not support a 2008 R2 Domain Level. Has anyone ever reverted backwards ?
Cheers
Colin

Hi Colin,
Could you please clarify which version of ACS you are using?
For example, if this is ACS 4.2 appliance with a remote agent installed on the Windows server, then Windows 2008 is not supported:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp308532
If this is ACS 5.2, then Windows 2008 R2 should be supported:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/users_id_stores.html#wp1248491
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Block Cookies at Domain Level

In early Firefox I would set cookie rules at the domain level using the wildcard - for example - *.tubmogul.com would be accepted, blocked, or allowed for session.
In current 3.x and 4.x implementations this does not appear to be possible and I feel like I am spending a good portion of the day blocking the various "n.domain.com" where "n" varies by site and within a site.
Ideas?

Don't use a wildcard with *. Only specify the domain, that includes all sub domains: tubmogul.com

Authorization at domain level

Hi all ,
I have a requirement wherein I have a put an authorization at domain level.
The authorization group and object have been created.
How to find the exit where i can use thse objects for the domain.
Domain is BANKN .
Pls help .
Thanks
Supriya

Hi all ,
I have a requirement wherein I have a put an authorization at domain level.
The authorization group and object have been created.
now i need to put an auth check for all the transactions that use this domain ...
For eg in FK03 , enter ant vendor and company code , go to 'DISPLAY VENDOR : PAYMENT TRANSACTIOn' . if that user is auth then he should be able to see the bank acc number ellse 'XXXXXXXXXX' ...
This is the scenario .
How to find the exit where i can use thse objects for the domain.
Domain is BANKN .
Pls help .
Thanks
Supriya

Tables in SAP that store records at domain level.

Hi can anyone please tell what the tables in SAP that store contents at Domain level ?

Check fm DDIF_DOMA_GET
table DD07L,DD07T

Retreiving description at domain level

Hi,
I`m creating a custom infotype and for one of the fields , I do have to select values through F4 help. On selection of the value, the description is to appear next to the field.
The value for this field and its description is stored at domain level.
In create mode, I do get the description coming up on the screen using the FM 'AM_READ_TEXT_ON_DOMAIN_VALUE'. But when I save it and then try to display information for this infotype, then I find that the description does not appear on the screen.
Can anyone help out regarding this.
Regards,
Farhana

Hi,
The screen number is all the same, only the status would vary as "MOD' for change mode and 'DIS' for display mode, if I`m right.
In change mode, I do get the description only when I press Enter on the Codevalue field.
Is there any way where I can get it fetched once I launch the Edit /Display screen?
Your reply would really be helpful.
Thanks in advance.
Regards,
Farhana

DDIC domain level interval validation

Hi guys
playing around with DDIC and validation I have a few questions:
on domain level it is possible to define an interval: lower limit and upper limit, but in my test application it is not being validated wether an entered value is inside the range.
when using single values it is being validated.
1) is it possible to define ranges at all and get that validated automatically by framework
2) is it possible to change error message
for example: "The Entered Value Can Only Contain Numerical Characters" when entering characeters instead of numbers...
regards
stefan

Hi,
For the lower and higher limits we can go for the Select-Options component.
We can use the standard component WDR_SELECT_OPTIONS for this.
And if you are not using the select options and if you are trying to have two different input fields one for lower and opther for higher limit then we need to handle the validations by ourself.
You can have you own messages also. The message you are getting is from the standard table T100. try to use the other methods of the Message component in order to throw your own message.
Try to have the sample code -
Here I have considered the message container.
Here I have created an input field for 'CONNID' and I'm checking wether it is intitial or not. I have taken antoher context attribute 'TEXT' for haveing the own message and to the Textview UI element I have bound this TEXT to have my own message.
method wddomodifyview .
if wd_this->text = 'YES'.
data:
   lr_text type ref to cl_wd_text_view,
   v_connid type s_conn_id.
data:
    elem_context        type ref to if_wd_context_element,
    stru_context        type if_mesg=>element_context ,
    item_connid         like stru_context-connid.
* get element via lead selection
elem_context = wd_context->get_element( ).
* get single attribute
elem_context->get_attribute(
    exporting
      name = `CONNID`
    importing
      value = item_connid ).
        data:
          elem_context1   type ref to if_wd_context_element,
          stru_context1 type if_mesg=>element_context ,
          item_text      like stru_context-text.
*       get element via lead selection
        elem_context1 = wd_context->get_element( ).
lr_text ?= view->get_element( 'TV1' ).
if item_connid is initial.
       item_text = 'Please enter value'.
      lr_text->bind_text( path = 'TEXT'   ).
elseif not item_connid is initial.
   select connid
   up to 1 rows
   from sflight
   into v_connid
   where connid = item_connid .
   endselect.
   if sy-subrc ne 0.
      item_text = 'Please enter correct value'.
      lr_text->bind_text( path = 'TEXT'   ).
   else.
      item_text = ' '.
      lr_text->bind_text( path = 'TEXT'   ).
   endif.
endif.
wd_this->text = ' '.
elem_context1->set_attribute(
      value = item_text
      name   = 'TEXT'
endif
If you want to validate the lower and higher limits-
if item_connid-low GE <<number>> and item_connid-high LE <<number>> .
Use the message container compoenent and throw the message.
Else.
Proceed further.
endif.
Using the message container methods- Here I'm validating the Airline Id (CARRID) for the valid values -
method onactionclick ( or your event handler).
data:
    elem_context    type ref to if_wd_context_element,
    stru_context    type if_mesg=>element_context ,
    item_carrid     like stru_context-carrid,
    l_current_controller type ref to if_wd_controller,
    l_message_manager    type ref to if_wd_message_manager,
    l_str type string,
    l_carrid type s_carr_id,
    l_msg type symsg,
    l_parm type syst-msgv1.
* get element via lead selection
elem_context = wd_context->get_element( ).
* get single attribute
elem_context->get_attribute(
    exporting
      name = `CARRID`
    importing
      value = item_carrid ).
l_current_controller ?= wd_this->wd_get_api( ).
l_message_manager = l_current_controller->get_message_manager( ).
if item_carrid is initial.
    l_str = 'Please Enter the Carrier Id'.
* report message
    l_message_manager->report_error_message(
        message_text             = l_str
else.
    select single carrid                        " Airline Carrier Id
        from scarr
        into l_carrid
        where carrid eq item_carrid.
    if l_carrid is initial.
      concatenate l_parm item_carrid into l_parm.
      l_message_manager->report_t100_message(
          msgid                    = 'BC_BOR'
          msgno                    = '159'
          msgty                    = 'E'
          p1                       = l_parm   ).
    endif.
endif.
endmethod.
Here I'm validating only the lower values this not using the select options. here i have taken an input field and validated it.
If you use the select-options then after we populate the ranges table in that then we need to the validations as specified above.
Regards
Lekha

Domain level performance tuning.

Hi all,
In 10g version the Domain level performance setting can be done in Domain.xml file .In which file the Domain level performance settings can be done for *11g version* .
Any suggestions?
Thanks,
karthik

In 11g, there is no concept of multiple domains.
You can fine tune the parameters using EM.
Login EM. Navigate to SOA Infrastructure. From the SOA Infrastructure menu, choose Administration -> BPEL/Mediator/HWF, to set parameters each of the engine. You can also use MBean browser.

Thread configuration in domain level

Dear All,
We have created a new domain and while allocating threads like dspengine threads and dspinvoke threads, they are not getting reflected even after restarting the server.
Please let me know the dependencies on these threads so as to increase the thread configuration.
Thanks,
Karthik

Hi Raja Ram,
First, Execute the activity 'Maintain conversion and scrambling Rules'.
You will see a new screen, Now on the left side you have a create button, click on it. Name the rule as you want.
Now a rule is created and you would see a different screen on the right side with many tab strips.
Go to first tab strip 'Attributes' and choose
Classification : Scrambling Rule
Rule type       : Field Related
Check the check box for maintain consistent scrambling and enter any Identifier (Ex: IDENT1).
Go to second tab strip 'Parameters' and create two parameters
IM_PARAM     1     ANY     TYPE     <domain name>
EX_PARAM     2     ANY     TYPE     <domain name>
Go to third tab strip 'Source code' and enter the scrambling logic between the comments 'Begin your code here' and
'End your code here'.
Go to fourth tabstrip 'Table Assignment', choose radio button 'Domain level assignment'.
Click on the create button on the bottom grid and enter the <domain name>.
Save the rule and proceed.
Regards,
Naveen.

Domain Level

Similar Messages

Maybe you are looking for