Domain machine not presented with login option
I finally got around to digging into windows10 again after we were able to get our DA working on our Domain added windows 10 machines. I logged in and was interrupted as us techs normally are. The machine went idle and I went to log back in and NO
domain credentials options would display. Just the pretty blue screen with accessibilities and restart options. Has anyone else seen this on their domain added machines? Win10 9926 recent build, cisco anyconnect vpn installed. Firewall policy applied. We also
are using a SSRPM with a offline gina but again, I had already logged in but once it went idle no go.
One of my associates has also experienced this on VM and physical machine without any applications installed. So far only fix for him and myself was to do refresh PC.
What I tried was the ole F8 but nada, insert media to get safe mode with advance troubleshooting and not much luck there. The machine will boot fine, the scenery window appears but once you click to go to a login prompt, no prompt boxes at
all. Is there a service which might be getting whacked?
Any directions if this should happen again would be most helpful.
Best Regards,
I finally got around to digging into windows10 again after we were able to get our DA working on our Domain added windows 10 machines. I logged in and was interrupted as us techs normally are. The machine went idle and I went to log back in and NO
domain credentials options would display. Just the pretty blue screen with accessibilities and restart options. Has anyone else seen this on their domain added machines? Win10 9926 recent build, cisco anyconnect vpn installed. Firewall policy applied. We also
are using a SSRPM with a offline gina but again, I had already logged in but once it went idle no go.
One of my associates has also experienced this on VM and physical machine without any applications installed. So far only fix for him and myself was to do refresh PC.
What I tried was the ole F8 but nada, insert media to get safe mode with advance troubleshooting and not much luck there. The machine will boot fine, the scenery window appears but once you click to go to a login prompt, no prompt boxes at
all. Is there a service which might be getting whacked?
Any directions if this should happen again would be most helpful.
Best Regards,
Similar Messages
-
Local Machine not present in local configuration store
Having trouble getting Lync 2013 installed on a Windows Server 2012R2 OS.
Pool consists of Lync Server and SharePoint Server. Using Enterprise version so Databases are on separate SQL 2012 server. All machines domained. Logged in as myself who has domain admin creds.
Topology published without issue - all machines entered as FQDN using "servername.domain.net". Databases created in and showing in SQL MGMT Studio.
Moving on to Deployment Wizard and running through the steps:
Step 1 of Lync 2013 Deployment Wizard - Install Local Configuration Store
> Install Local Configuration Store
Import-CSConfiguration -FileName "C:\Users\MYNAME\AppData\Local\Temp\CSConfigData-2015_02_12-14_39_58.zip" -Verbose -LocalStore
> Enable local replica service
Enable-CSReplica -Verbose -Confirm:$false -Report "C:\Users\MYNAME\AppData\Local\Temp\Enable-CSReplica-[2015_02_12][14_39_53].html"
Creating new log file "C:\Users\MYNAME\AppData\Local\Temp\Enable-CSReplica-d761588e-475f-4b27-9345-d9ff17390a52.xml".
Enable replica service for the Lync Server computer.
Creating new log file "C:\Users\MYNAME\AppData\Local\Temp\Enable-CSReplica-[2015_02_12][14_39_53].html".
Enable-CSReplica" processing has completed successfully.
Detailed results can be found at "C:\Users\MYNAME\AppData\Local\Temp\Enable-CSReplica-[2015_02_12][14_39_53].html".
> Replicate-CsCmsCertificates
Logging status to: C:\Users\MYNAME\AppData\Local\Temp\ReplicateCMSCertificates-[2015_02_12][14_39_53].html
Task Status Completed.
Step 2 of Deployment Wizard - Setup or Remove Lync Server Components
> Bootstrap-CsComputer
Logging status to: C:\Users\MYNAME\AppData\Local\Temp\BootstrapFull-[2015_02_12][14_47_42].html
Checking prerequisites for bootstrapper...
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Host name: LyncServer.domain.net
WARNING! Host not found in topology. All roles will be uninstalled.
Disabling unused roles...
Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\MYNAME\AppData\Local\Temp\Disable-CSComputer-[2015_02_12][14_47_49].html"
Checking prerequisites for roles...
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Checking prerequisite PowerShell...prerequisite satisfied.
Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
Checking prerequisite VCredist...prerequisite satisfied.
Checking prerequisite SqlNativeClient...prerequisite satisfied.
Checking prerequisite SqlClrTypes...prerequisite satisfied.
Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
Checking prerequisite UcmaRedist...prerequisite satisfied.
No databases discovered, skipping Install-CsDatabase...
No roles discovered, skipping Enable-CsComputer...
am now stuck as the Step 3 shows "Local Machine not present in local configuration store"Hi Dee McClanahan,
I suggest you should check whether or not the names are spelled correctly in the topology builder.
If this is not the case, I suggest you can create and publish a new topology.
To remove the published entry run:
remove-CsConfigurationStoreLocation
In addition, I’m a little confused about what you say “Pool consists of Lync Server and SharePoint Server.”
Do you mean that you installed Lync Server and SharePoint Server on the same box ?
Best regards,
Eric -
Hi,
i am getting following error, while taking RMAN backup.
ORA-01580: error creating control backup file /backup/snapcf_TST.f
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options
DB Version:10.2.0.4.0
while taking datafiles i am not getting any errors , i am using same mount points for both (data&control files)[oracle@localhost dbs]$ oerr ora 27054
27054, 00000, "NFS file system where the file is created or resides is not mounted with correct options"
// *Cause: The file was on an NFS partition and either reading the mount tab
// file failed or the partition wass not mounted with the correct
// mount option.
// *Action: Make sure mount tab file has read access for Oracle user and
// the NFS partition where the file resides is mounted correctly.
// For the list of mount options to use refer to your platform
// specific documentation. -
ORA-27054: NFS not mounted with proper option
I was trying to take RMAN backup from RHEL 5 for a database residing on fedora 13
but the NFS share is getting me the following error
ORA-19504: failed to create file "/backup/weekly/1qmp0vv3_1_1"
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options
Additional information: 3
thanxHere the 10gR2 doc link
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/app_nas.htm#sthref976
Otherwise, as already suggested, there're a numbers of notes in Metalink you should look at, it could really be a bug which may require an upgrade (10.2.0.1 is out of date anyway).
Nicolas.
Too late, but glad you fixed it, thanks for your feedback.
Edited by: N Gasparotto on Oct 13, 2011 1:36 PM -
SAP BS 7.0 SR1 : sapinst not working with '-nogui' option
Hello all,
I'm installing SAP BW (BS 7.0 SR1)
I have a big problem with the new sapinst
When i try to lunch ./sapinst -nogui i have an error.. and sapinst exit
If i try to lunch ./sapinst without option, it work great !
System Os: RHEL5.2 x86_64
RDBMS : Oracle
Variable environment **
export PATH=/opt/IBMJava2-amd64-142/bin:$PATH
export JAVA_HOME=/opt/IBMJava2-amd64-142
export JCE_POLICY_ZIP=path_to/jce.zip
Error with sapinst -nogui execution ***
root@luqn2 IM_LINUX_X86_64# ./sapinst -nogui SAPINST_USE_HOSTNAME=ciBWQ-vip
[==============================] \ extracting... done!
inflated: US_export_policy.jar
inflated: local_policy.jar
inflated: Readme.txt
ERROR 2009-11-13 13:18:10.662 syxxcfsmgt.cpp:206
CSyFileSystemMgtImpl::getNode(const CSyPath &/tmp/sapinst_exe.2332.1258114688/jre/bin/../jce) const
FSL-02015 Node /tmp/sapinst_exe.2332.1258114688/jre/bin/../jce does not exist.
Opened sylib701_1.so
exe dir is /tmp/sapinst_exe.2332.1258114688
MessageLib initialized successfully.
Working directory changed to /tmp/sapinst_exe.2332.1258114688.
Opened /tmp/sapinst_exe.2332.1258114688/iaguieng701_1.so
Working directory changed to /mnt/SAPCD/SP_BW/InstMst_7.01_SR1__NW_ERP_CRM_SRM_ SCM/IM_LINUX_X86_64.
getspnam() returned NULL.
checking existence of account user="root" uid="0" succeeded with true.
inserted account (root, 0, USER) into the accountcache.
receiving and sending on port 21200
Environment variable SAPINST_JRE_HOME set to value '/tmp/sapinst_exe.2332.1258114688/jre'.
We need to support remote functionality .
The needed policy files are not present in the used JVM (/tmp/sapinst_exe.2332.1258114688/jre/bin)
JCE_POLICY_ZIP points to a file, assumeing that we have a jar archive.
Try to extract it with a jar call ....
A child process has been started. Pid = 2343
Node /tmp/sapinst_exe.2332.1258114688/jre/bin/../jce does not exist.
Unable to init; unknown execption was thrown .... SAPInst will terminate now...
Very strange error, and nothing on the web explain that problem
I had read a lot of sapnote but nothing to help me
Thank a lot for your answer
Best regards
Benoit.
Edited by: SYLVAIN DUSSART on Nov 14, 2009 12:56 PM
Edited by: SYLVAIN DUSSART on Nov 14, 2009 12:59 PMHi,
Here the solution:
Be careful, is very important to have a good policy zip file from Sun's web site
If the zip do not contain exactly
1 folder jce
All other files in the folder jce
That will not work !
For example, if you zip contain all file directly in the zip, without the jce folder, you sapinst will not start.
In fact, my jce zip folder was not like jce the zip folder on Sun's web site..
Best regards,
Benoît. -
Grouping Checks, All element from a group present with all option available in group
Respected Techie....May i get help on this how to design a query for below condition, if possible.declare @myTable table (PT varchar(50), MK varchar(50), MO varchar(50),
YR varchar(50), REMARKS varchar(50), PART varchar(50))
Table Structure:-
insert into @myTable values ('Battery' ,'Dodge','Ram 50', '1989', 'Four Wheel Drive', '51C') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Battery' ,'Dodge','Ram 50', '1989', 'Rear Wheel Drive', '51X') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Battery' ,'Dodge','Ram 50', '1989', 'Rear Wheel Drive', '51C') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Battery' ,'Dodge','Ram 50', '1989', 'Four Wheel Drive', '51X') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Air Filter','Dodge','Colt', '1990', 'Four Wheel Drive', '46264') -- This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Air Filter','Dodge','Colt', '1990', 'Four Wheel Drive', '875') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Air Filter','Dodge','Colt', '1990', 'Front Wheel Drive','46264') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Air Filter','Dodge','Colt', '1990', 'Front Wheel Drive','875') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Bull Bar' ,'Ford','F-250', '1997', 'Four Wheel Drive', '1330371971') --All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
insert into @myTable values ('Bull Bar' ,'Ford','F-250', '1997', 'Four Wheel Drive', 'NR-301') --All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
insert into @myTable values ('Bull Bar' ,'Ford','F-250', '1997', 'Rear Wheel Drive', 'NR-301') --All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
insert into @myTable values ('Controls', 'Cadillac','Chasis','1992', 'Rear Wheel Drive', 'CK620158') --Removed from output, as group by PT,MK,MO,YR contain only 1 remarks and 1 distinct part
insert into @myTable values ('Controls', 'Cadillac','Chassis','1992','Rear Wheel Drive', 'CK620159') --Removed from output, as group by PT,MK,MO,YR contain only 1 remarks and 1 distinct partThank You Very MuchIt would certainly help with some more details on the business rules.
I am puzzled over these two rows:
insert into @myTable values ('Bull Bar' ,'Ford','F-250', '1997', 'Four Wheel Drive', 'NR-301')
--All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
insert into @myTable values ('Bull Bar' ,'Ford','F-250', '1997', 'Rear Wheel Drive', 'NR-301')
--All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
Overlooking the fact that the part number in the comment does not match, how this is different from parts 51C and 51X which also has a Four Wheel Drive and a Rear Wheel Drive?
I guess the real question is how do I know what "all available options" are? I would kind of expect a table which defines this.
And please don't forget to tell us which version of SQL Server you are using!
Erland Sommarskog, SQL Server MVP, [email protected] -
VM Machines not communicating with each other on Hyper-V 2012
In Hyper-V 2012 on Server 2012 I have created two VM's Server 2008 64-bit & Server 2012 64-bit.
The problem is both VM's are not communicating with each other.
Regards
Ganesh ParteHello,
seems this belongs to the Hyper-V networking configuration settings. Please ask this in http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
and also describe how you have the network settings configured in the Hyper-V MMC.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
Why is the Ken Burns icon not present with the crop option on imovie10
I do not have a tab labeled Ken Burns after I enter the crop mode with imovie10.
The Ken Burns and other options will show up when you have a project defined and select a clip in the "timeline" of the project.
HtH
Ben -
VDI Setup - trusted domain user not able to login
Two fold question:
Setup is as follows:
1 RDS server - Windows Server 2012 R2 STD - hosts all services except virtualization
1 Hyper-V server - Windows Server 2012 R2 STD - hosts all VMs
Domain A - Windows Server 2012 STD
Domain B - Windows Server 2012 STD
Domain A has Group A setup with users allowed to login to VDI infrastructure. Works without a problem.
Domain A has Group B setup which has users from Domain B. Group B has been added to the RDS server (CAP and RAP) and also to the virtual desktop collection.
User from Domain B logs into the RDWeb to connect to machine.User is able to login and see the pool. When User from Domain B tries to connect to a machine in the pool, the user gets the error specifying that he may not have permissions to connect to the
RD server. I have verified all setting and permissions.
When I attempt to assign User from Domain B a Private VD, i receive the following error:
" The security identifier could not be resolved. Ensure that a two-way trust exists for the domain of the selected users. Exception: The network path was not found "
I have confirmed trust is established and working properly. I also upgraded both the RDS and Hyper-V server to R2, since this error was also caused by adding the domain local group to the collection prior to R2. This error does not appear anymore when adding
the domain local group to collection, but only when attempting to assign user a VD.
Please help, and I am not able to find anything remotely close to this issue using the common search engines.
Thank you in advance.I have been able to get this working.
- I created a brand new virtual desktop collection and assigned the domain local group with members from Domain B to the collection
- I created two seperate Global security groups on Domain A (where the RDS and VDI server reside). Each group was assigned its respective Virtual Desktops (one for VDs for Domain A and one for VDs for Domain B)
- I created 2 seperate RAPs. One for each Gloabl security group that has the VDs.
Not sure what the trick was, but it is working now. -
Time Machine not working with Verbatim USB2TB External HDD
MacBook Pro
15-inch, Mid 2010
8GB Ram
OS 10.8.2
No updates available ATT.
Problem with Time Machine using Verbatim USB2TB (Verbatim # 96865) external hard drive in regular and safe boot. According to the Verbatim website, this external drive is compatiable with MAC OS 10+ and can be formatted to the specific Mac filesystems.
The following list of events below happen irregardless of running in regular or safe boot, so I noted my last attempt at a backup while in Safe Boot.
Before this last attempt, I successfully zeroed out the data on the drive in regular boot.
As you will see below, the drive works just fine until Time Machine gets it grimy digits on it and kills it like South Park kills Kenny.
---- Begin ----
Started in Safe Boot
Connected and powered on the external drive.
Erased the drive and formatted it to Extended Journaled. Partition was successfully created.
Verifying partition map for “SAMSUNG HD203WI Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Checking Core Storage Physical Volume partitions
The partition map appears to be OK
Verifying volume “Big2TB”
Checking file systemChecking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Big2TB appears to be OK.
Successfully copied over 2.8 GB of random data. (Screenshot)
Deleted the data and then emptied the Trash.
Started Time Machine backup.
Time Machine Created a backup folder on the external drive.
Time Machine started to transfer data then hung at 452.1 MB of 257.66 GB.
Backup failed.
--- Console ---
1/13/13 11:57:59.988 AM com.apple.backupd[1558]: Starting manual backup
1/13/13 11:58:04.581 AM com.apple.backupd[1558]: User continued after being warned of changed destination volume identity
1/13/13 11:58:04.623 AM com.apple.backupd[1558]: Backing up to: /Volumes/Big2TB/Backups.backupdb
1/13/13 11:58:04.628 AM com.apple.backupd[1558]: Ownership is disabled on the backup destination volume. Enabling.
1/13/13 11:58:05.156 AM mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
1/13/13 11:58:06.336 AM com.apple.backupd[1558]: Forcing deep traversal on source: "MainMan" (mount: '/' fsUUID: 8A3A5598-7C8B-3753-ABA8-D980E60299A3 eventDBUUID: 23107488-4BC9-49FB-818D-226AE695DE06)
1/13/13 11:58:23.346 AM com.apple.backupd[1558]: Backup content size: 246.45 GB excluded items size: 12.21 GB for volume MainMan
1/13/13 11:58:23.368 AM com.apple.backupd[1558]: Found 910640 files (234.23 GB) needing backup
1/13/13 11:58:23.370 AM com.apple.backupd[1558]: 281.08 GB required (including padding), 2 TB available
1/13/13 11:58:23.388 AM com.apple.backupd[1558]: Waiting for index to be ready (100)
1/13/13 11:59:23.443 AM com.apple.backupd[1558]: Waiting for index to be ready (100)
1/13/13 12:00:02.530 PM WindowServer[114]: CGXGetWindowInfo: Invalid window 1045
1/13/13 12:00:02.530 PM Dock[259]: CGSBindWindow: Unable to obtain window information
1/13/13 12:00:02.531 PM Dock[259]: CGSGetWindowTags: Invalid window 0x415
1/13/13 12:00:02.531 PM Dock[259]: find_shared_window: WID 1044
1/13/13 12:00:02.531 PM Dock[259]: CGSGetWindowTags: Invalid window 0x414
1/13/13 12:00:02.532 PM Dock[259]: find_shared_window: WID 1043
1/13/13 12:00:02.532 PM Dock[259]: CGSGetWindowTags: Invalid window 0x413
1/13/13 12:00:04.481 PM WindowServer[114]: CGXGetWindowType: Invalid window 1066
1/13/13 12:00:04.481 PM Dock[259]: find_shared_window: Invalid depth WindowID 0x42a
1/13/13 12:00:04.481 PM Dock[259]: CGSGetWindowTags: Invalid window 0x42a
1/13/13 12:00:04.482 PM Dock[259]: find_shared_window: WID 1065
1/13/13 12:00:04.482 PM Dock[259]: CGSGetWindowTags: Invalid window 0x429
1/13/13 12:00:04.482 PM Dock[259]: find_shared_window: WID 1064
1/13/13 12:00:04.482 PM Dock[259]: CGSGetWindowTags: Invalid window 0x428
1/13/13 12:00:23.497 PM com.apple.backupd[1558]: Waiting for index to be ready (100)
1/13/13 12:01:23.549 PM com.apple.backupd[1558]: Waiting for index to be ready (100)
1/13/13 12:01:44.830 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[1541]) Exited: Killed: 9
1/13/13 12:01:44.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1541 [xpcd]
1/13/13 12:01:49.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
1/13/13 12:01:49.000 PM kernel[0]: macx_swapon SUCCESS
1/13/13 12:02:15.000 PM kernel[0]: USBF: 7419.448 AppleUSBEHCI[0xffffff8008e26000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 5, EP: 2)
1/13/13 12:02:21.000 PM kernel[0]: USBF: 7425.451 AppleUSBEHCI[0xffffff8008e26000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 5, EP: 0)
1/13/13 12:02:27.000 PM kernel[0]: USBF: 7431.454 AppleUSBEHCI[0xffffff8008e26000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 5, EP: 0)
1/13/13 12:02:58.000 PM kernel[0]: USBF: 7462.473 AppleUSBEHCI[0xffffff8008e26000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 5, EP: 2)
1/13/13 12:05:37.068 PM WindowServer[114]: CGXGetWindowInfo: Invalid window 1196
1/13/13 12:05:37.068 PM Dock[259]: CGSBindWindow: Unable to obtain window information
1/13/13 12:05:37.068 PM Dock[259]: CGSGetWindowTags: Invalid window 0x4ac
1/13/13 12:05:37.069 PM Dock[259]: find_shared_window: WID 1195
1/13/13 12:05:37.069 PM Dock[259]: CGSGetWindowTags: Invalid window 0x4ab
1/13/13 12:05:37.070 PM Dock[259]: find_shared_window: WID 1194
1/13/13 12:05:37.070 PM Dock[259]: CGSGetWindowTags: Invalid window 0x4aa
1/13/13 12:06:34.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:06:39.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:06:44.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:06:50.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:06:55.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:07:01.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:07:11.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:07:17.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:07:22.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:07:27.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:07:27.000 PM kernel[0]: jnl: disk1s2: do_jnl_io: strategy err 0x5
1/13/13 12:07:27.000 PM kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 389120 bytes to the journal!
1/13/13 12:07:54.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:08:21.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:08:21.820 PM com.apple.backupd[1558]: Error: (-36) SrcErr:NO Copying /Applications/Adobe/AdobePatchFiles/{CFA1AAD1-DC10-413D-875E-2F5B8A78CB3B}.zip to /Volumes/Big2TB/Backups.backupdb/numeroeins/2013-01-13-115805.inProgress/376C91 FB-29D6-47F1-A29B-67D94CBD01BA/MainMan/Applications/Adobe/AdobePatchFiles
1/13/13 12:08:23.122 PM com.apple.backupd[1558]: Stopping backup.
1/13/13 12:08:23.122 PM com.apple.backupd[1558]: Error: (-8062) SrcErr:NO Copying /Applications/Adobe/AdobePatchFiles/{CFA1AAD1-DC10-413D-875E-2F5B8A78CB3B}.zip to /Volumes/Big2TB/Backups.backupdb/numeroeins/2013-01-13-115805.inProgress/376C91 FB-29D6-47F1-A29B-67D94CBD01BA/MainMan/Applications/Adobe/AdobePatchFiles
1/13/13 12:08:23.136 PM com.apple.backupd[1558]: Copied 817 files (572.1 MB) from volume MainMan.
1/13/13 12:08:23.136 PM com.apple.backupd[1558]: Copy stage failed with error:11
1/13/13 12:08:23.174 PM com.apple.backupd[1558]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Big2TB/Backups.backupdb/numeroeins size:37
1/13/13 12:08:33.228 PM com.apple.backupd[1558]: Backup failed with error: 11
1/13/13 12:08:48.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:09:15.000 PM kernel[0]: disk1s2: I/O error.
---- End console ---
Attempted to copy over 2.8 GB of random data again. Failed.
Now the drive is completely useless until it is erased. Also will not eject properly anymore. Force eject took 3 minutes.
--- Console ---
1/13/13 12:19:00.248 PM mtmfs[1555]: filesystem unmount attempted from stopFS
1/13/13 12:19:31.946 PM fseventsd[44]: disk logger: failed to open output file /Volumes/Big2TB/.fseventsd/0000000000048e11 (Invalid argument). mount point /Volumes/Big2TB/.fseventsd
1/13/13 12:19:31.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:19:32.187 PM fseventsd[44]: disk logger: failed to open output file /Volumes/Big2TB/.fseventsd/0000000000048e11 (Invalid argument). mount point /Volumes/Big2TB/.fseventsd
1/13/13 12:19:32.910 PM WindowServer[114]: CGXDisableUpdate: UI updates were forcibly disabled by application "Disk Utility" for over 1.00 seconds. Server has re-enabled them.
1/13/13 12:19:35.129 PM WindowServer[114]: reenable_update_for_connection: UI updates were finally reenabled by application "Disk Utility" after 3.22 seconds (server forcibly re-enabled them after 1.00 seconds)
1/13/13 12:20:05.375 PM fseventsd[44]: disk logger: failed to open output file /Volumes/Big2TB/.fseventsd/0000000000048e11 (Invalid argument). mount point /Volumes/Big2TB/.fseventsd
1/13/13 12:20:05.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:20:05.390 PM fseventsd[44]: disk logger: failed to open output file /Volumes/Big2TB/.fseventsd/0000000000048e11 (Invalid argument). mount point /Volumes/Big2TB/.fseventsd
1/13/13 12:20:37.153 PM fseventsd[44]: disk logger: failed to open output file /Volumes/Big2TB/.fseventsd/0000000000048e11 (Invalid argument). mount point /Volumes/Big2TB/.fseventsd
1/13/13 12:20:37.153 PM fseventsd[44]: disk logger: failed to open output file /Volumes/Big2TB/.fseventsd/0000000000048e11 (Invalid argument). mount point /Volumes/Big2TB/.fseventsd
1/13/13 12:20:37.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:20:48.102 PM diskarbitrationd[49]: mds [34]:20995 not responding.
1/13/13 12:21:04.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:21:04.451 PM com.apple.kextd[11]: Can't create kext: invalid CFBundleVersion in identifier cache entry entry 339.
1/13/13 12:21:14.854 PM com.apple.security.pboxd[1518]: CGSGetWindowTags: Invalid window 0x7b5
1/13/13 12:21:14.854 PM com.apple.security.pboxd[1518]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
1/13/13 12:21:15.372 PM com.apple.security.pboxd[1518]: CGSCopyWindowColorSpace: Invalid window 0x7b5
1/13/13 12:21:22.606 PM WindowServer[114]: CGXDisableUpdate: UI updates were forcibly disabled by application "com.apple.security.pboxd" for over 1.00 seconds. Server has re-enabled them.
1/13/13 12:21:23.060 PM com.apple.quicklook.satellite[1657]: bootstrap_look_up2 failed with 0x44c
1/13/13 12:21:23.081 PM mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
1/13/13 12:21:23.090 PM WindowServer[114]: reenable_update_for_connection: UI updates were finally reenabled by application "com.apple.security.pboxd" after 1.48 seconds (server forcibly re-enabled them after 1.00 seconds)
1/13/13 12:21:23.000 PM kernel[0]: Sandbox: sandboxd(1658) deny mach-lookup com.apple.coresymbolicationd
1/13/13 12:21:26.021 PM com.apple.security.pboxd[1518]: CGSReleaseWindow: Invalid window 1973
1/13/13 12:21:26.021 PM com.apple.security.pboxd[1518]: _NXTermWindow: error releasing window (1000)
1/13/13 12:21:27.775 PM sandboxd[1658]: ([1657]) QuickLookSatelli(1657) deny mach-lookup com.apple.PowerManagement.control
1/13/13 12:21:52.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:21:57.967 PM fseventsd[44]: disk logger: failed to open output file /Volumes/Big2TB/.fseventsd/0000000000048e11 (Invalid argument). mount point /Volumes/Big2TB/.fseventsd
1/13/13 12:21:57.967 PM fseventsd[44]: disk logger: failed to open output file /Volumes/Big2TB/.fseventsd/0000000000048e11 (Invalid argument). mount point /Volumes/Big2TB/.fseventsd
1/13/13 12:21:57.000 PM kernel[0]: disk1s2: I/O error.
1/13/13 12:21:58.229 PM com.apple.kextd[11]: Can't create kext: invalid CFBundleVersion in identifier cache entry entry 339.
1/13/13 12:21:58.000 PM kernel[0]: jnl: disk1s2: close: journal 0xffffff800908acc0, is invalid. aborting outstanding transactions
--- End Console ---
---- That's all folks! ----
Any help would be great!The external drive is malfunctioning, or the data cable is bad, or you have another malfunctioning device on the bus, or there's an internal hardware fault.
-
Time machine not connecting with new time capsule
Will someone please help? I have just recently joined the MAC family and purchased a new Macbook along with a new time capsule. It took unbelievably long to get things running (ie wireless access with 2 other PC based desktops and a PC laptop and shared network printing with an USB connected printer to the time capsule)- I thought macs were supposed to be easy?! Anyways, the only thing that I cannot figure out is how to properly set up time machine. I follow the instructions and turn time machine on, choose my backup disc (which is the time capsule), but when I click "use for backup", I keep getting the "connection failed- server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again" What am I supposed to do now? What is there to check when all of the other computers are able to access the internet (including the Macbook) and wirelessly print. The stupid timecapsule router function is working but the backup portion of it is not???!!!! Please help someone who is about to give the mac and the time capsule to the first person walking down the street - it has been a frustrating 2 days.
First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
▹ System Preferences... ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click
Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back. -
HARD DISK PROBS / TIME MACHINE not behaving with TC ? READ THIS!!!!
I had many probs with the hard disk and now have a happy healthy TC working great with time machine, so I though I'd share my experiences with others hoping it will save you my huge pain !
i,
I've spent hours and hours trying to get the harddisk to work properly. Set-up was easy-peasy and the Airport works great for the internet. However, when trying to use time-machine and the hard disk it was a nightmare !!! Each attempt at the back-up failed after about 4 gig with a 'unable to mount volume' error. If I re-tried, it failed. Following some of the tips on the forums, I deleted the back-up file created by time machine on the hard drive and the initial back-up started successfully but failed after about 4 gig again (I had 96 gig to back-up). There are various fixes flying around -
*_ensure you have a name for your computer - should be short and no spaces or funny characters. Same goes for your name of the timecapsule. Some people are saying you should use an ethernet cable for your first back-up but that should not matter at all.*_ I took mine back to the apple store in the end - a mac genius downloaded all the latest patches (only came out 19th march) for the time-capsule firmware, time machine software and airport express. Still didn't work, so conclusion was the time-capsule was knackered !!! SO MY RECOMMENDATION IS TO GET APPLE TO REPLACE IT BUT MAKE SURE YOU TRY THE ABOVE FIRST.
New time-capsule was attached to my imac, started up great first time. My initial back-up ran through perfectly first time through wireless - it took 15 hours but I did have 96 gig to back-up. time machine sees this no problem so it looks like everything is fine. _*I ALSO NOTICED THAT THE TC WAS MUCH MORE QUIET AND LESS HOT.*_
Good luck !!Hi,
Well, The external drive you have problem with is from a third party vendor :-)
I just looked up your model and we need to start over.
How do you connect it to your computer?
Is it plugged in to the router via ethernet and you access it over WiFi.
The drive needs to be setup as per supplied instructions.
The manufacturer says it is Time Machine compatible but from my experience I know this is not switched on by default.
The main reason why you cannot access it is you basically have to set it up for your use and most likely authenticate to it.
At this stage I'm quite sure there is no much wrong with that drive. It just need setting up.
Let me know if you have any instructions from Seagate which you can follow. -
SAP SYSTEM Option not present in Installation Option while running Inst Mas
Hi Gurus,
I am getting problem while installation of Solution Manager 7.0 EHP1 & or ECC6.0 EHP4 ready
I Start with SAPINST on Win 2003 SP2 server 32 Bit Ent. Edition , JRE 1.4.2_17,
After running SAPINST from Installation Master SAP Solution Manager 7.0 EHP1(5103441) & Inst. Master SR1 SAP NW7.0 EHP1 (51038620)
I seen only two options 1. Standalone Engine --> Solution Manager Dignostic Agent.
2. Software Life Cycle Options --> which has JAVA Add-on, system copy, application server .. etc additional options
So my problem : Is I am doing anything wrong or I these installation DVD's are only for additional components?
How could I start my Installation i.e. Central system instance
BR,
Darshan>
> As per your query you can go through as per installation guide then there are no issue for installation. I >hope you will be able to install it.
>
As said earlier installation on 32 bit is not possible for Solman EHP1 and EHP4 system, check installation guide for more details.
Thanks
Sunny -
NVision Report not generated with email option in the Run Report page
Hi ,
I want to send the nvision reports through email to the users, I tried it by setting the email option in the drop down of the "Type" after giving "Run Report" and then specifying the email ids. The issue is i am getting emails , but the report is not generated which otherwise generates, and hence no attachement is seen on the email .
Anybody faced this issue ?? Please help
Regards,
KanchanaHi again!
You are absolutely right! I will mark as solved in 5 mins (can't do it now, thread to fresh it seems).
thanks
Manfred -
The "Organize Bookmarks" menu is not present with the new version of Firefox.
With the new version of Firefox, "organize bookmarks" is no longer present under the Bookmarks menu. Therefore, I am unable to export my bookmarks.
I found it. "Organize Bookmarks" is now "Show All Bookmarks".
Maybe you are looking for
-
Error while connecting to ECC tables from Crystal
Hello, I am trying to create a crystal report on the SAP ECC tables directly, when I try to create a new connection from u201CSAP Table, Cluster, or Functionu201D option in crystal reports 2008 I get this error" Logon Failed. Details: you don't have
-
Just updated to Lion today, 11/22/11. I did not realize things likes reading a Word document would not be supported. "You cannot open this because PowerPC applications are no longer supported." How am I supposed to read and open Word documents fro
-
Credit memo request for inter company bill-problem in acct posting
Hi Guru's, Problem occured when intercompany prices were missing therefore was corrections made manually.but some invoices were blocked (no accounting docs generated).Strange is that one invoice got accounting docs and not blocked (same correcti
-
Is there any way to power up the MacBook without opening the lid?
Does anybody know if there are key combinations (external keyboard) or a way to enable the Apple Remote to power up a MacBook? I have an external display, keyboard, and mouse connected and would like to be able to startup the MacBook without opening
-
Creating sitemap for webpage in new iWeb...
I am having a lot of trouble getting a sitemap to generate for my website that I built using iWeb. It will only generate a map for the very first page and none of the rest of them. Has anyone else had this issue? www.mtbtrailreview.com