Domain name and IP address - 11.5.8

Hi All,
We are running Oracle Application 11.5.8 on HP-UX (two node). Now we want to change Domain name and ip address of the server.
How can I do this. From where can I get the documentation for this task.
Thanks.

Hi, this job is very easy if you use autoconfig tool, for maore information you can read the note 165195.1 in Metalink.
Good Luck...

Similar Messages

Changing Domain Name and IP address of a server

We have an Oracle 10G server (running on Windows) that needs to have its domain name and IP address changed. I did a search on this forum and found similar threads to this one (e.g. Rename server name & change domain Just wondering if anyone has any other comments to make that haven't been mentioned previously.
Looks like on the server side, we just have to change the listener and tnsnames.ora file. Anything else we have to worry about? (Unfortunately this is something I've never done before.)

TomF:
Yeah I know the listner SHOULD be the only thing that needs to know the server's network information. However, databases are big, complex pieces of software, and I'm just a bit paranoid that there's some system variable that needs to also get changed that I might be overlooking.
You suggested I might need to change the global_name... Upon further research, I've found references to other variables that may need to change... local_listener, remote_listner, and dispatcher. (Note: I don't have the Oracle documentation handy so I can't verify how valid those are.)

Resolving local domain name and nameserver address

Hi,
Is there any way to get the local domain name (on Windows it would be NT domain name and on Unix based platform it is DNS server's domain name) and local DNS server address ?
Thanks,
Rohit

import java.net.*;
try
   InetAddress ip = InetAddress.getLocalHost();
   String fqdn = InetAddress.getCanonicalHostName();
   int firstDot = fqdn.indexOf(".");
   String domain = fqdn.substring(firstDot+1);
   System.out.println("domain: "+domain);
catch(Exception ex)
   ex.printStackTrace();
}

Change of Domain name and IP address - Urgent requirement

Hi,
The Oracle internet directory is installed as a separate component and we have a requirement for changing the ipaddress and domain name . Could any one please tell me what steps need to be done or any related documents for changing the domain name of OID.
thanks in advance.
regds,
hussain

Refer following for 10.1.2:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/host.htm#BABJGDBH
Hope this will help.
Thanks
Shail

Problem with external domain name and hosting

Hi I have my own domain name and hosting plan I want to use. However, I have trouble pointing my site from BC to my server.
I found the following information but in my case "create A-Records" is not available on the "Site Domains". Please advise.
Thanks.
Bonbon668
Point externally hosted domains to your Business Catalyst site
If you have chosen to use external DNS service for your domain name, create A-Records for both the www and non-www versions of your domain name. Then, point them to your site, which resides on one of the following IP addresses:

Hi
Can you please confirm that there is no “Create A records” option under “More Actions” ?

Domain name and search engines

Hi
There have been a few helpful postings about the importance
of having text on your frontpage for crawlers etc to improve your
search ranking. My question: how important is the domain name for
search engines? Is it worth investing a dime or 2 on a good generic
domain? If you needed to have 2 words (e.g. www.top-lawyer.com) is
it better to have them combined (e.g. www.toplawyer.com).
PS This is just an example...I am not a lawyer!

"Airborne Bob" <[email protected]> wrote in
message
news:[email protected]...
> Gareth:
>
> In my case, I have created my website at Domain Name
> www.LBIBeachRentals.NET.
> The .COM version was not available at the time I
obtained it.
>
> But I just purchased the .COM version this past Friday
because it became
> available and it's the more commonly accepted URL (and
as a preventative
> measure against someone else getting my rental people).
>
> Network Solutions tells me it's no problem.... they'll
just direct (or
> "point")the .COM to my .NET website. Is this okay in
terms of search?
> Are you
> saying I will somewhat diminish ranking by doing this?
>
> TIA for any advice on what I'm doing.
I think that your both confusing "domain names" and
"domain/web space
hosting" here.
Typically you register with a hosting company and receive an
amount of disk
space. bandwith etc and a domain name, say
www.thru-the-net.com
You create your web site and upload it to the serve and
people can access
your web site at www.thru-the-net.com
Now you realise that many people outside the US are entering
www.through-the-net.com so you get your provider to register
www.through-the-net.com for you as well and they POINT this
address to
www.thru-the-net.com. That is to say when people enter
www.through-net.com
the actually end up at www.thru-the net.com i.e. the same
place.
This is o.k. you can have as many variations as you want -
www.thru-the-net.com
www.through-the-net.com
www.thruthenet.com
www.throughthenet.com
www.thru-the-net.net
www.through-the-net.net
etc. all pointing to the same www.thru-the-net.com server.
This is o.k. and
the search engines don't mind this.
BUT
If you have SEPARATE web space for each of these domain name
variants and
just copy your entire site into each of these spaces, now the
domains are
not being forwarded. They are entirely stand alone domains
that are all the
same.
Search engines DON'T like these and see them as an attempt at
improving
ranking and therefore penalise all of them.
Sorry for being so long winded, but hopefully this makes
sense.
Regards
Phill

The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

Hello,
I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
There seem to be a couple of things wrong with the application,
1 if I drag the application icon onto the dock, it won't stay there
2 I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details. All that comes up is the main page of her website.
I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
Any ideas please?
she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

Migrate WSUS server from 2003x86 to 2008x64, new hardware, use same name and IP address?

Searching through the WSUS forums and reading the TechNET migration documentation, I have bits and pieces of information to make this a smooth transition...I think. I have a plan in mind but
would like the communities input on what I am thinking before moving forward and having it blowup in my face :). <o:p></o:p>
I have the following currently:<o:p></o:p>
A single WSUS 3.0 SP2 server, running on Server Win2003x86, using the default WID (susdb.mdf) on the same server. I have SQL 2005 Express installed on this server as well for other services
but this has no bearing on the WID correct?<o:p></o:p>
What I would like to do:<o:p></o:p>
I have a new server (a much better one) that I would like to move WSUS on to, that will be running Server Win2008x64 (I have to setup first). <o:p></o:p>
Steps that I would like to follow:<o:p></o:p>
1. I will go through and setup this new server with all M$ updates etc... under a new name (ex. wsusnew) and DHCP acquired IP address and then power it down. <o:p></o:p>
2. Get on my current WSUS server and backup all current WSUS settings, groups, DB etc... to a network location for temporary storage. Then power it down.<o:p></o:p>
3. Delete the current WSUS server computer object in AD, DNS entry I will leave because my intension is to give the same IP address to the new WSUS server.<o:p></o:p>
4. Start the new server, static assign the IP address from the old WSUS server to this new server and then change the name of (wsusnew) to the old servers name, which should be ok sense I deleted
the AD object in step 3.<o:p></o:p>
5. After the obvious restart, the new server will have the same name and IP address as the old server. <o:p></o:p>
6. Now that the new server is up (with same settings name/IP as old server), I will then go through and install the WSUS role on the server and restore my WSUS information.<o:p></o:p>
Questions:<o:p></o:p>
1. Step 2 above, is it possible to do this, without making replica servers? I kept reading about this as I was researching doing this, I would rather just copy the DB and folders and simply
put them in-place on the new server.<o:p></o:p>
2. Step 6 above, restoring of the data, what is the proper way to do this in the scenarioI described? <o:p></o:p>
Thank you to anyone who can provide me some information.
Jeff

Thank you for the reply, I will follow and let you know. Proabably be next week sometime before I'm able to try though. So look for a reponse then. Thank you again.
Jeff
OR...
You can use the much more simple, much more reliable, and much more proven method of:
Install new server as a replica of the old.
Replicate.
Configure new server as upstream server.
Point clients to new server.
Turn off old server after all clients have redirected to the new server.
For everybody that has tried the backup/restore the database procedure described above, they have encounted complications of one form or another.
WSUS has a built-in and fully supported comprehensive replication capbility. use it! :-)
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Microsoft MVP - Software Distribution (2005-2012)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin

How can I send an email to a group in my address book, but hide the individual names and email addresses?

how can I send an email to a group in my address book, but hide the individual names and email addresses?

You used to be able to do this through leaving unchecked the box in preferences "when sending to a group show all member addresses". However, that feature failed some time ago (two or three years?) and the only way to hide the addresses now is to put the group in the BCC field.

How to email a list of names and email addresses?

I have a group of about 60 people with various amounts of data in each of their Address records.
I want to send an email to the group with a list of the names and email addresses of everyone on the list. I don't know how to do this neatly. Got any ideas?
If I put the group name in "to" in Mail, each person gets a messy non-alphabetical list with commas. If I send a group vCard, I send more data than I want to send. If I make a printed list, I have to convert to a pdf file and send that which is not nearly a simple as a text list.
Is there any way to export fields of my choice from Address into either text or spreadsheet format?
I want to send a list like this, but with tabbed columns.
Steve Jobs [email protected]
Barack Obama [email protected]
yourname1 yourname2 [email protected]
Thanks,
Phil

Thanks, Thomas for the prompt response, but the pdf method has two problems.
First, it's got to be in landscape mode, or the email address word-wrap. That makes for a five-page list. I want to send a 60-line text list.
Secondly, there's no way to eliminate the label (work, home, other...) from the email address field.
I will use the pdf method if no one comes up with a better idea.

Domain name and session

Hi ,
We have deployed our application on tomcat server built on struts framework.
We have also set the domain name and are redirecting the domain name to Static Ip
where our application is deployed with URL Masking option enabled.
Everything is working fine in Firefox.But in IE6 and IE7 we are facing issues related to sessions.
Example:
it works when we access directly
http://156.78.78.89:8000/myapp/login.do?method=display
     when i redirect this with a domain name(with URL masking enabled) like
     http://www.mydomain.com It does not work.
     I am not able to login into application(using sessions of this) or use shopping cart(using cookies)
Cookies are getting disabled and there is no session maintainance.
Is it problem with struts config or tomcat server?
I am unable to take my application live because of this issue.
Please help me to solve. Thank you for your time and consideration
email:[email protected]

Hi BKBK,
I'm using CF10 and aplicaction.cfc

<cfset THIS.name= "GuarderiasGMX2"/>
<cfset THIS.applicationTimeout = createTimeSpan( 0, 1, 0, 0 ) />
<cfset THIS.sessionManagement = true />
<cfset THIS.sessionTimeout = createTimeSpan( 0, 1, 0, 0 ) />
I don't use cookies to set the session. I only use cfcookie for kill the session on the application.cfc when the user sign out.
<cffunction
name="onRequestStart"
access="public"
returntype="boolean"
output="false"
hint="I initialize the page request.">

<cfset var local = {} />



<cfif structKeyExists( url, "killSession" )>

<cfloop
index="local.cookieName"
list="cfid,cftoken,cfmagic">

<cfcookie
name="#local.cookieName#"
value=""
expires="now"
/>
</cfloop>

<cflocation
url="index.cfm"
addtoken="false"
/>
</cfif>
Regards

Get the pc name with domain name and add it to my properties file using commands

i want to get the pc name with domain name and add it to my properties file using powershell .
sid

function Get-Environment{
[environment]|Get-Member -Static -MemberType Properties |
ForEach-Object{
if($_.Name -ne 'StackTrace'){
$v=[scriptblock]::Create("[environment]::$($_.Name)").Invoke()
New-Object PsCustomObject -Property ([ordered]@{Name=$_.Name;Value=$v[0]})
Get-Environment
Get-Environment | Out-String | Out-File environment.txt
¯\_(ツ)_/¯

I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?

I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?

This may help.
Can't connect to the iTunes Store
What happens whenyou try to connect? Error messages?

Get Attachment Name and from address of mail in bpel process

Hi All,
I am using UMS Adapter to poll email server and getting the attachment and saving it to local disk.
In Payload from UMS adapter i am getting href of the attachment but I am not able to figure out as to how to get Attachment Name and From Address of a mail in my Bpel process.
please guide me in getting them .
Thanks in Advance
Divyanshu

1. Double click on your composite receive activity.
2. Go to Properties tab in your receive activity.
3. Click "+".
4. Window that pops up,scroll down and select "jca.ums.from" and store it in some variable say fromAddress (Make sure before adding this property u create fromAddress variable of string data type).
5. Click OK.
6. In the same way add property for "jca.ums.msg.content-description" from drop down and assing it to some variable.
you are good to go.
Hope this helps.
Regards,
Karan
Oracle Fusion Middleware Blog

RE: 1) Changing name and IP address of an AIX 4.2 Server 2)Using NAT

Daniel,
you (normaly) just have to :
1) edit the $FORTE_ROOT/fortedef.sh fileand change the value of variable
FORTE_NS_ADDRESS
2) shutdown and restart forte environment
3) put the new values in the control panel of the client and run !
It worked on our site with the same configuration (Aix 4.2)
Good luck
De : Daniel[SMTP:[email protected]]
Répondre à : Daniel
Date : vendredi 18 juin 1999 13:08
A : [email protected]
Cc : Jose Ignacio
Objet : 1) Changing name and IP address of an AIX 4.2 Server 2)
Using NAT to reach forte
Hello Forte Users :
    I have 2 questions to make:
    1)
    I've installed a Forte Server Central Node (Release 3.0.F.2) in an
IBM RS/6000 with OS AIX 4.2
    (The name of the server is Name_1 and the IP address is
125.125.50.50 with mask 255.255.255.0)
    Nowadays we had to change the name and IP address of this server
lets say to Name_2 and 125.125.60.60 with mask 255.255.255.0.
    After that we try to find any reference to old name and IP address
in the forte directory and all of its subdirectories changing them to
the new ones.
    After these changes we found than forte could'nt start the nodemgr
server.
    We have too many reasons to avoid installing FORTE again.
    Does anybody know if I have to change anything more to make
nodemgr server work.
    2)
    The second question is about NAT (Network Address Translation).
    To reach a Forte Server Central Node from a Forte Client we have
to pass through a Firewall and NAT.
    We are researching and at this moment we can not reach the server
from the client, has anybody any suggestion to correctly configure
Forte (Client and Server) to use NAT between them.
    If anyone could help me I would be very pleased.
    Thank you very much in advance,
    Daniel GonzáLucas (EAM Sistemas Informáticos SL, Spain,
e-mail: [email protected])
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

>> 15 Mins is not enough for completely the replication.
>> use repadmin /syncall /aEpd   - for force replication.
>> Wait 3 hrs minimum.
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

Domain name and IP address - 11.5.8

Similar Messages

Maybe you are looking for