Domain Name change on 1 node of RAC
Is there oracle note for changing domain name on RAC?
Edited by: FrodoDot on Jan 9, 2010 5:55 PM
FrodoDot wrote:
Is there oracle note for changing domain name on RAC?
Edited by: FrodoDot on Jan 9, 2010 5:55 PMWhat oracle version?
If your RAC registered hostname + domain, this case like you change hostname
Check:
$ olsnodes
Changing Hostnames in Oracle RAC
http://www.pythian.com/news/482/changing-hostnames-in-oracle-rac/
1 node of RAC -> you may delete node/change hostname/add node
If domain, not registered in RAC... you may change it ... (no remove node or reinstall RAC)
Similar Messages
-
Connection Errors to Remote Desktop from OSX after Domain name change
We have an issue using Microsoft Remote Desktop from Macs in our school. All was well until we changed the domain name of our RDS servers and installed a new wildcard certificate. Connections work perfectly in Windows 7/8 and also iOS on iPads, but we cannot
get any Macs to connect having tried OSX 10.7 and 10.9. The error message says the connection failed to load but seems to add a spurious end to the connection string - TS/en-US/Default.aspx - but we cannot trace where this is being picked up.
We can get to the site in a web browser and sign in to receive the "browser not supported" message in Safari so traffic is obviously getting to the severs.
Has anyone else had a similar issue? We have spent days poking around with DNS etc but can't seem to make any progress here.Hi Jeremy,
I have tried removing connections and also re-installing the App. We have been using this App since January with no real issues until we made our domain name change - I really don't understand why it works fine in Windows and iOS but not OSX. We are doing
nothing different to what we have done from day 1.
Log file from our old connection when it was working looked like this:
[2014-Mar-24 10:41:43] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
redirectdrives=1
promptcredentialonce=1
authentication level=0
full address=rdsfarm.xxxxxxx.internal
session bpp=16
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=*
alternate shell=||OpenMind
gatewayusagemethod=2
alternate full address=rdsfarm.xxxxxx.internal
workspace id=rdsgw.xxxxxxx.internal
allow font smoothing=1
redirectposdevices=0
audiocapturemode=1
gatewaycredentialssource=0
remoteapplicationname=OpenMind 2.0
devicestoredirect=*
remoteapplicationmode=1
remoteapplicationprogram=||OpenMind
enablecredsspsupport=1
redirectsmartcards=1
redirectclipboard=1
span monitors=1
gatewayprofileusagemethod=1
gatewayhostname=rds.xxxxxxx.sch.uk
remoteapplicationcmdline=
The log file looks very different now, all I am getting is:
[2014-Jun-17 10:26:41] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-17 10:26:41] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=30 (AF_INET6) addr=fe80::21f:5bff:feb8:3f72%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.65 netmask=255.255.255.0
[2014-Jun-17 10:26:41] RDP (0): fw0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-17 10:26:41] RDP (0): client version: 8.0.24875
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-17 10:26:41] RDP (0): correlation id: 9f18df13-7c84-dc4b-a780-e6b77a280000
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-17 10:26:41] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Jun-17 11:44:15] RDP (0): *** Application terminated ***
[2014-Jun-18 09:51:37] RDP (0): *** Application terminated ***
[2014-Jun-19 12:00:19] RDP (0): *** Application terminated ***
[2014-Jun-19 12:15:32] RDP (0): *** Application terminated ***
[2014-Jun-19 12:16:21] RDP (0): *** Application terminated *** -
We have a CSS doing HTTP load balancing. There is no SSL termination done on this device.
will the domain name change have any impact on the load balancer?
thanks
sathappanIf you see the domain name in your CSS config, then yes there will be an impact.
Otherwise, no.
By default we do not check the domain name.
Gilles. -
Can anyone tell me which are the changes to do in the alui portal when the domain name change ? Which are the files to modify ? Does any tool exist to automate the task ?
ex : portal.toto.com became portal.titi.corporate.comI'm interested to any solutions too.
For instance, my solution was to find and change all configuration files with a command line like "find . -name "*.xml""...
But you have also to change configuration inside the portal, like all remote web services addresses
I think it's not so easy to change the domain name -
Domain Name Change Disabling Keys
I'm told that our domain name change from hhp.umd.edu to
sph.umd.edu will disable the Contribute keys.
Is that correct and if so, how do I get new keys that are
usable with the new domain?
thanks for your assistance.
danielI have a related question. I have about 20 different
connections that I have set up manually. Now that our domain login
has changed the connections are no longer there. Where is that
information stored. I'd like to recover it. -
Domain name change broke oms/agents/grid control
We merged with another company and the domain names changed for all servers last weekend. I fixed all servers (tnsnames, listner.ora and db_domain parameter), so sqlplus works and all processes work.
My question is: which parameters do I need to change in the agents and the oms for gridcontrol to work again. Where are those parameters? Is there any documentation I can follow?
Thanks.Hi.
if the domain name from EM GC has changed you need to migrate the repository
and reinstall the oms.
*T
Oracle® Enterprise Manager
Grid Control Installation and Configuration Guide
10g Release 5 (10.2.0.5.0)
E10953-11
September 2009
Oracle® Enterprise Manager
Advanced Configuration
10g Release 5 (10.2.0.5)
E10954-03
Edited by: tbrinkmann on Feb 16, 2010 6:00 AM -
App server domain name changed
Hi All,
Our App server domain name changed so we did following ways to take the changes to effect. When starting the Middle-tire gives error
Old name=koredm104715.in.company.com
New name=ias-instance id=koredm104715.apac.company.com
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cmd chgiphost.bat -mid
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cmd /c chgiphost.bat -mid
Oracle Home set to C:\Oracle\Product\OraMidTier10gR2
Starting Change Hostname/IP...
Enter fully qualified hostname (hostname.domainname) of destination
(koredm104715.APAC.company.com)>>koredm104715.APAC.company.com
Enter fully qualified hostname (hostname.domainname) of source
(koredm104715.in.company.com)>>koredm104715.APAC.company.com <----------- Issue is here as source should be koredm104715.IN.company.com
Enter valid IP Address of destination
(10.47.32.43)>>10.47.32.43
Enter valid IP Address of source
(10.47.32.43)>>10.47.32.43
Source and destination hostname/IP are identical.
Continue? (y/n) y
Change Hostname/IP completed successfully.
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cd..
C:\Oracle\Product\OraMidTier10gR2\chgip>cd..
C:\Oracle\Product\OraMidTier10gR2>cd opmn\bin\
C:\Oracle\Product\OraMidTier10gR2\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
==============================================================================
opmn id=koredm104715:6200
5 of 7 processes started.
ias-instance id=OMT_10gR2.koredm104715.in.company.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
WebCache/WebCache/WebCache
Error
--> Process (pid=3152)
failed to start a managed process after the maximum retry limit
Log:
C:\Oracle\Product\OraMidTier10gR2\opmn\logs\WebCache~WebCache~1
ias-component/process-type/process-set:
WebCache/WebCacheAdmin/WebCacheAdmin
Error
--> Process (pid=4924)
failed to start a managed process after the maximum retry limit
Log:
C:\Oracle\Product\OraMidTier10gR2\opmn\logs\WebCache~WebCacheAdmin~1
C:\Oracle\Product\OraMidTier10gR2\opmn\bin>Edited by: Lokanath Giri on १९ जनवरी, २०१२ १:५८ अपराह्नHave you checked your web cache log files for errors? Also check the %ORACLE_HOME%\opmn\log directory as there are many log files which can be helpful resolving your issue.
Thanks,
EJ -
Internet Email Domain Name Change
Mangagement wants our email domain name changed because of it's length. Another government agency handles hosting for us now and can't change it for us. I have paid for a new name using a company on the internet and now have to switch it over. I see, in console one, that I can create a second name in Tools -> Groupwise System Operations -> Internet addressing and then set one of them to preffered. Can I do this and then set the new name as preferred? I would like to allow email that is addressed to the old email domain name to flow to the users for 30 days. Looks like I will need to change the foriegn ID in the gwia and also the name in the internal groupwise domain properties. Is there anything else that needs to be done? Is this the best way to do this? Thanks
On 7/30/2012 3:36 PM, dgonnse wrote:
>
> Mangagement wants our email domain name changed because of it's length.
> Another government agency handles hosting for us now and can't change
> it for us. I have paid for a new name using a company on the internet
> and now have to switch it over. I see, in console one, that I can
> create a second name in Tools -> Groupwise System Operations -> Internet
> addressing and then set one of them to preffered. Can I do this and
> then set the new name as preferred? I would like to allow email that is
> addressed to the old email domain name to flow to the users for 30 days.
> Looks like I will need to change the foriegn ID in the gwia and also
> the name in the internal groupwise domain properties. Is there anything
> else that needs to be done? Is this the best way to do this? Thanks
>
>
assuming there's no po/user/domain overrides of IA settings, that should
work ok. -
Question about RAC 10g on server running AIX and domain name changes
We have several 10g clusters running on IBM p-Series AIX servers, and our company is changing the domain name for our network. I am concerned that if we do not change the domain names in the TNSNAMES.ora file and also the /etc/hosts file on each server, the cluster will no longer function. We are using CRS (version 10.2.0.3) and ASM within each cluster.
Does anyone know where I can find information about changing the domain name that was set up as part of the CRS and database installs for RAC? Does anyone have experience doing this, and would be willing to share a few insights? Thanks in advance for any advice you can give!You may be able to use the VIPCA utility for RAC to change or modify the public and private settings for your domain names on AIX. Also, the Oracle 10g DBCA "Database Configuration Assistant" should be of use to change your settings for your RAC environment.
Also, see here for a good IBM Redbook that covers Oracle 10g RAC on AIX platforms:
http://www.redbooks.ibm.com/redbooks/pdfs/sg247541.pdf
Regards,
Ben Prusinski
http://oracle-magician.blogspot.com/
Regards,
Ben Prusinski
http://oracle-magician.blogspot.com/ -
Hello,
We have 3 Nodes RAC 11gR2 (11.2.0.2.3) on Redhat Enterprise Linux 5.5.
We will move the servers from one datacenter to another. This means we will have to change the IPs and domain name of the nodes.
In our environment, we are using:
- Role separation method: grid user as grid infrastructure owner and Oracle user as the RAC database owner.
- Non shared Oracle Home and Non shared grid infrastructure home.
- No Grid Naming Service (GNS)
- No IPMI
- Voting Disk and OCR are shared in ASM; ASM disk group Name: OCRVOTE
- SCAN resolves through DNS.
- 3 Nodes clusters: below the content of /etc/hosts;
-bash-3.2$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost6
# Oracle RAC Configuration
# Public
10.119.144.136 db01.lds.com db01
10.119.144.138 db02.lds.com db02
10.119.144.140 db03.lds.com db03
# Public VIP
10.119.144.137 db01-vip.lds.com db01-vip
10.119.144.139 db02-vip.lds.com db02-vip
10.119.144.141 db03-vip.lds.com db03-vip
# Private
10.119.144.193 db01-priv
10.119.144.194 db02-priv
10.119.144.195 db03-priv
-bash-3.2$
- Oracle Home value: /opt/app/oracle/product/11.2.0/db_1
- Grid Home value: /opt/11.2.0/grid
- ADVMAIN is the global database name.
- advmain1, advmain2, advmain3 are the database instance names.
- advcluter is the cluster name.
When installing the grid infrastructure,we used the FQDN including the domain name...
Could you provide me please the steps to change the IP and domain names addresses to have an operational environment.
Thank you,
Diegossolbach wrote:
If it is just the SCAN, this can be changed. (srvctl modify scan).
The services could be dropped and recreated.
Important thing is, that your public hostname does not contain the domain.
Regards
SebastianSebastian,
How can I check the public hostname does not contain the domain? I have checked the OCR Dump file and didn't found Public string ...
Thanks,
Diego -
Domain name changes when sent to external mail ids
Here's the problem...
We are sending PO's as pdf's to the vendor..
If the vendor domain name is vendor.com and mine is company.com.
SAP sends a mail
To [email protected] ;[email protected]
CC : [email protected]
When the mail reaches the vendor it shows as
To [email protected] ;[email protected]
CC : [email protected]
the domain name of person2 gets changed though person2 does get the mail...and when the purchase manager at the company looks at it in his inbox - it looks as it should be.
I checked SOST it shows the correct mail id.This is not specific to a particular domain occurs with all domains .
Has anyone encountered such a problem before.
Regards
RaniHello Navjot,
if you have some basis background you can check TCode SCOT there you can see if the mail connect for external mails is configured correctly. There shoud be at least a node for SMTP communication. If there is such node check that sending s not restricted to certain adresses. Furthermore you could check over the menu if the default domain is set properly.
Kind Regards
Roman -
Hi
i have installed oracle 11g grid ( both rdbms repository and OMS on the same linux server 5.5) but now my domain name has changed slightly ...
do I need to change anything ?
does this require full reinstallation of grid ?
oracle v 11.2.0.2
I am trying to install the agent thru grid wizard but its coming back with a warning ..
WARNING : Expected result: The management server must be reachable from the target node via HTTP(S). Actual Result: HTTP url http://mygrid_server.old_domain_name.cm:4889/agent_download/ is not reachable from the target node Check complete. The overall result of this check is: Failed <<<<
RECOMMENDATION : If there is a firewall configured between the management server and target node, ensure that the HTTP(S) ports of the management server are open
thanks
Edited by: user9198889 on Dec 29, 2010 9:59 AMAssuming the hostname changed on the host where the OMS and repository reside due to the domainname change, I would reinstall. You could update the emoms.properties file and reboot the OMS but not sure that would do the trick.
you can get details on updating the emoms.properties via emctl here: https://support.us.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=1111894.1&h=Y
Let me know.
Thanks -
Not able to start the listener in oracle 10g after the domain name changed
Hi
I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
oracle@ptcr4d00:~> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /opt/oracle/10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.2.0 - Production
System parameter file is /opt/oracle/10g/network/admin/listener.ora
Log messages written to /opt/oracle/10g/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
I have posted the contents of the tnsnames.ora and listeners.ora
TNSNAMES.ORA
TC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENERS.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/10g)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
Could you please help me to resolve this issue ?
Regards
ManiHi
Please find the content of the /etc/hosts below
# IP-Address Full-Qualified-Hostname Short-Hostname
#127.0.0.1 localhost
9.124.114.49 PTCR4D00
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
9.124.114.49 PTCR4D00 PTCR4D00
Regards
Mani -
I have just change the DNS domain name of my ISE from CLI and restarted the appliance (its a 3395 appliance)
However,, when i log in via GUI it doesnt reflect the new dns name.
Any ideas please?let's see my task as follows;
1.change ip domain-name =xxx
2.ISE will ask you to restart app service then answer yes
3. i make "write memory"
4. i reload the ise
you choose check the dns name in forward zone and reverse zone too.
These are what i do if i require to change ise information
Sent from Cisco Technical Support Android App -
Unity/Domino Domain Name Change
I have a Unity server integrated with a Domino message store. We are changing our domain name. The cisco documentation I have found says that you have to rebuild Unity when moving to a new domain. We aren't moving to a new domain just changing the name. Credentials, SID's, QID's are all staying the same we are just changing the domain name. Does anyone know if I will have to rebuild unity given this change or can I simply change the domain name on the unity box?
Thank you in advance!Java is correct here. I understand that your reaction may be that you can rename a domain and then just reboot member computers twice for the changes to take effect; however, Unity is not a standard member computer. The AD information is not just membership info for the server but part of data that is propagated into SQL and etc. So, you will need to rebuild because essentially this, to Unity, is the same as moving the server to a new domain. You can use the following guide to step thru the process:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge080.html
The key is to make sure you get a DiRT backup and then rebuild to the exact same version of Unity including ES, patches, etc. Then you'll be able to complete the procedures and restore the system via DiRT restore.
Hailey
Please rate helpful posts!
Maybe you are looking for
-
No data query runs longer time
I have a table with 50 million records, partitioned based on date. if i do the query select * from test where trade_date = '01-mar-2010' brings the records in less than a second. works perfect but if there is no data for any given date in the table,
-
Hi, For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your
-
How to install SQL Developer Data Modeler 3.1.1 for Mac OS X?
How do I install SQL Developer Data Modeler 3.1.1 for Mac OS X? I downloaded the file "datamodeler-3.1.1-703-macosx.gz" from OTN, but there is only a single file inside this archive - "datamodeler-3.1.1-703-macosx". What am I missing here? Thanks in
-
100% cpu when scrolling over 2 pages
When I scroll down or up in a PDF document and that two pages appears at the same time ( the bottom of page 1 and the top of page 2 ), the scrolling become very slow, and the cpu pop to 100%. I noticed that on all computers. If you want to see an ext
-
IDM Workflow - Reading values of Multiselect
Hi, I have some user ids in the multselect box - in the left side list box. Once the user selection is done, the user ids will be moved to right hand list box. There is a launch button in the page. When i click the launch button the values of list bo