Domain name for iWeb in 'Lion?'

I wan to know how to manage my website on two different computers and after looking at other questions, a lot of people are suggesting to each other that all you do is to copy the 'domain name', locates in home folder-library-application support- iweb. however I cant seem to find the 'Library' in the home folder. does the Lion software have this. how do I access my domain for my website on Lion?

Your search in this forum would have found this :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html
And this :
https://discussions.apple.com/message/18937299#18937299

Similar Messages

Multiple domain names for iWeb on .mac account

I've managed to get the iWeb site I created uploaded onto a domain name i created (eg www.abc123.com). I had to change the domain name on my .mac account. The thing is it only allows you to enter 1 domain name. Now I have purchased 3 domain names, one for myself, one for my business and one for my mothers business. Is there a way round this because at the moment I can't get round it. Thanks.

Hi Ben,
If using .Mac hosting and other hostings as well you can have multiple domains pointed to different sites so that each site will have yourdomain.com. However on .Mac you can have only one CNAME, the other personal domains should be WebForward or WebForward with cloaking.
- WebForward: after you typed yourdomain.com in the browser you get forwarded to web.mac.com/username/ and web.mac.com/username/ will display in the browser
- WebForward with Cloaking (also called masking): after you typed yourdomain.com in the browser yourdomain.com will display in the browser and don't change while people browse through your website
- CNAME yourdomain.com will display instead of web.mac.com/username/ and while browsing through your website it will look like yourdomain.com/sitename/nameofpagepeoplelookatnow.html
If you're using Godaddy this is how to setup WebForwarding
http://help.godaddy.com/article.php?articleid=422&topicid=
and this is masking/cloaking
http://help.godaddy.com/article.php?articleid=424&topic_id=165&progid=GoDaddy
Regards,
Cédric

Domain name within iweb & hosting

*I recently purchased a domain name for a site that I will be working on.*
*There are two things that I would like to do:*
*1. Host the web site on my mac which is running OS X 10.5.6*
*2. Use iWeb '09 to develop the site*
*I would like to know how to go about hosting the site off my mac without having to run OS X 10.5 server.*
and
*How to set my registered domain (.com) address within iweb so when I publish the site it will only contain the domain name of the site in the URL field.*
Many thanks

This article may help:
_WWW FAQs: How do I host a real domain name at home?_
...which is a sub-article of this one:
_How do I host my own website at home?_
...which asks the qstn:
_Should I host my own web server?_.

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

How to change the name / IP address and domain name for BOE Server

Hello,
We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
I need your help
thank you

If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
Regards,
Tim

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

DNS Domain Name for SAP System

Hi,
I am installing BI7.1 , it is asking for DNS Domain Name for SAP System.
What to give i dont know please some one help
Thanks,
Jack

Hi,
Pls chk this link;
http://en.wikipedia.org/wiki/Domain_name_system
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Regards
CSM Reddy

How to set Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

You're looking for something completely different if
what you're after is to have your DHCP server (your
router) report your computer name.
yep - that's what I'm looking for but everything else didn't pan out so I'm following up the suggestion of our IT guy (which is that it reports the Netbios name).
I don't know what brand or model of router you're
using but with a Linksys brand router it reports the
yep - I've got a Linksys, about 2 years old (802.11b).
computer name, which is set on your Mac under Apple
menu --> System Preferences... --> Sharing. The
Linksys router will report the computer name
typically found under Status --> Local Network -->
DHCP Clients Table.
nope - I've got it set as "Michael Levin Laptop", but the Linksys router shows it (and all of the other Macs on the network) as "¸#Ð„ª"... Any way to debug this?
What you'll notice is that none of this has anything
to do with Windows. Today's basic networking is
platform agnostic.
I thought so; it was a desperation move, based on my IT person's suggestion...
Thanks,
Mike

Addon Domain Name for Exchange 2013.

Dear All,
I have one exchange Server 2013 ([email protected]) but my organization have more 5 domain name. Now we need add in the exchange server more 5 domain name for mail ID. It's possible in exchange server to add addon domain name for mail ID.
Md. Ramin Hossain

Yes Absolutely. You can add as many as you want, they are added under Accepted Domains.
Make sure you have already pointed the MX Records to your exchange server and after adding the domain to accepted domain you will start receiving the emails.
Where Technology Meets Talent

Netbios/Partial Qualified Domain name for Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

that did not work - I have a name entered in the
Sharing preference menu, and it does not show up.
Did you try setting the "DHCP Client ID" in the Network pane of System Preferences?
Even doing this may not work though... I know I had trouble getting a host name to show up correctly at my work. The DHCP server had picked up the previous name of my system and there didn't seem to be anything I could do from the client side to get it changed. The old system name was associated with my machines MAC address in the DHCP server and nothing I did from the client seemed to allow me to refresh the name the server had already latched onto. The network guys eventually had to delete the entry for my system off of the DHCP server and then allow my system to request a new IP address and refresh it's entry in the server. I have no idea how you might do something like this on a LinkSys router. I suppose the DHCP servers that run on these little personal routers are pretty rudimentary. I guess you might try doing some sort of reset on the router to see if it would reload client names. Or if you have your router configred to only allow connections from specific MAC addresses you might try deleting the entry for your Mac and then adding it back to see if that would trigger it to pick up a new client name.
sorry; I started a new thread because my question
is now much more focused. Someone told me the
Linksys router gets that info from the netbios name,
so I figured I should ask that specific question
with that specific subject title - maybe someone
knows how to specify this netbios name for a Mac,
but might not know or care anything about routers
and my specific problem.
It seems understandable that PCs would send their NetBIOS names to a DHCP server... but it seems to me that a Mac would send it's "sharing" name. I doubt that a LinkSys router would specifically request a NetBIOS name, but I don't really know... I don't have any experience with them. I suppose you could try turning on "Window Sharing" in system preferences to see it that made you Mac look more like a Windows box to the router. :^\
Steve

IWeb domain name for new website?

Hello!
I am new to iWeb and have created a website and now have questions about publishing it. The site I am creating is a replacement for an existing website that I did not make. I want the domain name to be the same as the existing site (cscfarm.com) and just to replace the old one with mine. Now, I would rather not join mobile me because I don't want the confusing url name and I already have permission to use cscfarm.com. My question is, do I have to get the FTP address from the person that currently runs the website? And if so, since I am using iWeb '08, how/where do I enter the FTP address to publish the website? I know that if I had '09 or higher I could do it through iWeb but I believe '08 is different. Am I going to need professional help for this or should I just get iLife '11 OR is it really not as hard as it seems? Any help/suggestions is appreciated!! Thanks so much!

Hi There,
BC does NOT host your domain.
You will need to keep it with your current Domain Registra or transfer it to another domain registra if you wish to close your account with Weebly. This has nothing to do with BC.
The EPP code is just a means to veritfy ownership of the domain and ensure such a transfer is approved by the owner of the domain.
In terms of BC all you do in the domain manager is to point all traffic or just web traffic to BC depending on your requirements/use of email etc.

Personal Domain Names in iWeb/MobileMe?

Why is it that MobileMe will now not accept UK domain names? I have a .co.uk domain name and can no longer use it with the new MMe.
When I first started to use iWeb and .Mac I purchased a UK domain name and had it entered in the personal domain name section and .Mac accepted it with no problem at all and I had my site redirected using the CNAME option for a long time.
Now .Mac has become MobileMe, it will no longer accept UK domain names, only domains ending in .com, .net, .org etc. Due to this, I can no longer use the personal domain name option of my MMe account and I did not want to re-direct to my domain using web forwarding so have had to publish my site to a folder and ftp up to my host server space. Now I don't mind doing this, as it does not take that long and the whole site loads more quickly anyway, but I would just like to know why MMe does not now accept UK domain names now when .Mac always used to?
This is irritating because it means that I am not able to use my MMe account to the full and as I live and work in the UK it did seem more appropriate to purchase a UK domain name rather than a .com or a .net.
Perhaps Apple should look at this again, as not accepting UK domain names excludes a lot of British users!!

What the heck is wrong with some people on this site! The guy was simply asking for advice!
I got a similar snotty reply from someone in a post I made in which I was simply asking for advice from other users.
I thought this was a SUPPORT Forum? Sheesh!
Anyway, I am glad that Ethmoid posted about MobileMe and the problem with it and .co.uk domains. I was thinking of signing up to MobileMe and using iWeb for my blog and having it redirected to a .ie domain. But if this problem keeps up then it looks like I won't.
Happy happy forum!

Creating the default personal domain name to iWeb from Wordpress.

I have a wordpress blog (that I do not want to use) that also serves as the administrator for my domain name and I am trying to get iWeb to be the default home page and not the Wordpress blog. I have changed [edited in Custom DNS Records] the DNS protocol at Wordpress to "CNAME blog web.me.com." and also configured the personal domain in MobileMe to reflect my domain name.
So far I am not having any success with the online instructions and cannot seem to find any further information on how to make iWeb the home page.
Am I missing some steps here?
Anyone have any insight into setting up iWeb with a personal domain, specificially with Wordpress as the domain administrator?
Thank you!

The first step is to configure your personal domain name in MobileMe which you have done.
You then need to go and alter your DNS records and what you want to do is create a new CNAME and direct this to web.me.com and that is it. Your domain name will be your alias and web.me.com will be your host and as long as your site is published to MobileMe, then your domain name should point to your host at MobileMe.
I don't know why you have blog in there under your CNAME? All you need is a new CNAME that points to web.me.com and nothing else and that should work.
Also, rather than changing back to MobileMe from WordPress, why not invest your time and energies into finding a new and alternative hosting company? You don't have long with MobileMe and you do realise that it will be gone at the end of June, so perhaps now would be a good time to look at the alternatives?

Domain name and iweb not working 100%

I’m a real novice.I made a site using iweb 09.with a domain name bought from fasthosts.co.uk.I pointed fasthosts at webme.com,but I can only see my site if I type nigeljames.net if I type http://www.nigeljames.net I get nothing,probably something simple but a fundamental flaw for me

If you have used CNAME forwarding, then you need to go to the DNS settings at fasthosts and point your domain name to @, CNAME forwarded to web.me.com and then www CNAME forwarded to web.me.com and this will then work.
Normally, you would have to cancel the A settings and then set up two CNAMES, one being your domain name represented by the @ and www, which is your sub domain. Set both up and then forward them to web.me.com, your host being MobileMe.

Domain name for iWeb in 'Lion?'

Similar Messages

Maybe you are looking for