Domain Names Not Appearing In Drop Down of Data Cleansing Task

For some reason, in several of my DQS data cleansing tasks, the domain names of the knowledge base I choose are not appearing. This is turn leads to an error message stating that "No domain field has been mapped to the input column...".
The task can see the DQS server and it can see the various knowledge bases on that server, but the domains are not appearing.
Has anyone else run into this issue?
Thanks!!
A. M. Robinson

I have just found the same issue.
For me, I believe it is because the domains are only used in matching rules, which the SSIS task does not support. Therefore they are not in the drop down as the SSIS DQS task cannot use them. Only map domains for data correction and you should be ok.

Similar Messages

  • Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

    created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

    You are using an older version of firefox, upgrade your browser to Firefox 8 and try
    * getfirefox.com

  • Rejected Quotation Should not appear in Drop Down List

    Dear All,
    While Making PO With Reference to RFQ.
    In ME21N while selecting Rejected Quotation should not come in Drop Down List
    Only Those RFQ with Accepted should come
    Regards
    Amey

    Can it be done in Standard Tcode.
    Are there any customisation for it
    Regards
    Amey

  • Children not appearing in drop down of dimension in multiple hierachy

    Hello,
    In 4.2 we had parenth1 and parenth2 and one dimension table (at least I think).  If parenth2 had multiple layers of children (children that were parents) you saw them in the drop down lists of the dimension for the second hierarchy.  In 5.1 it appears the architecture changed with dimensions and multiplie heirarchies.  I do not see children of children in my alternate hierarchies as before.  In looking in the dim"dimensionName"_H2 table I see the correct information.  The data seems to be in the tables but drop down lists for the dimension are not showing children of children if this makes sense.
    Ex.in 5.1  I'm expecting to see in  Hierarchy2 09 -> Child 099 ->Grandchild 0991
          but I'm only seeing Hierachy2 09 -> Child 099
    The Grandchild 0991does not appear. (Grandchild if you will of Hierarchy2)
    In Hierachy1 of the same dimension (or what use to be Parenth1 in 4.2) you see all parents and their children and children of their children etc.   Note:  this dimension is built using a dimension build ssis pkg.
    I know my explanation is probably wordy and confusing but hopefully someone can make sense out of it.  Any feedback, would be greatly appreciated!
    Vikki

    Hi Vikki,
    The way the memberselector shows the hierarchies to end-users is not changed from V4 to V5, so I think there might be something wrong in your dimension.
    Please try to copy the contents of the mbr<dimname> table to you membersheet to see more clearly what is going wrong, also try to process it from there (it will give you more hints compared to using a ssis package to import a dimension.
    Another idea is to look to Apshell, some dimension have multiple hierarchies, you could compare them to your own to see what is wrong.
    Alwin

  • Sql agent Operator not appearing in drop down box for job mail notification

    I have created a new sql agent operator but operator is not appearing in the drop down box when setting up email notification for job failure?
    SQL server 2008 r2
    windows server 2008 r2
    *Resolved deleted the existing job and recreated and then new operator was available in the dropdown box

    Hi ghw,
    Thanks for your post and glad to hear that the issue is resolved. Thanks for you posting your solution. That way, other community members could benefit from your sharing.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • LMS 4.2.3 variable name not show in drop-down list

    Hi all,
    I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
    There is a default threshold template called "CPU Utilization" and "Memory Utilization".
    After I choose either one, there should be one or two variable name in drop down list.
    But I only see "Select MIB Variable" in the list.
    I try to create a template with exact the same variable but still got nothing in the list.
    The strange thing is that no all the default template has this problem.
    I can see variable name under some template like "Device Availability" or "Port Availability"
    And this is not browser problem because I try both IE and Firefox.
    Any one how to solve this?

    Thanks for your advice.
    Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking  don't show me informations.[WS3550 2 devices and 2  WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
    SNMP, Credentials all is good.
    I try resolve this problem many days, but without results. Its semmes like a bug.
    ANy propositions?

  • ODBC driver does not appear in drop down list

    We created a system DSN using Unix ODBCConfig and the drivers
    supplied by IBM in its iSeries Access package. We are trying to
    connect to our AS400. We now have Coldfusion installed on SuSe 9.3
    Open Enterprise Server. Coldfusion runs fine. When we try to add a
    data source in the ColdFusion administrator, the system DSN driver
    that we configured does no show up in the drop down list. Did we
    miss a step? We have done this succesfully with coldfusion on
    Windows 2003 server.

    What version of ColdFusion are you running? I know with MX 7,
    your individual DSNs may not be listed, ODBC or otherwise, only the
    driver types. You are prompted to provide a valid Data Source name,
    then to select a valid driver type, which in your case would be
    ODBC Socket.
    Phil

  • Photoshop layer names not appearing in DVDSP

    DVDSP 4.0.3, Photoshop 7.0, MacBook 2GHz, OS 10.4.10
    Once I've brought my .psd file in to SP and added it to a layered menu, the layers appear, but their names do not, and I can't turn them off and on either. For example, in the inspector, under the 'General' tab of a layered menu I am unable to select which layer I want to show. The odd thing is that the correct number of layers appear- I made 9 layers in Photoshop, and 9 layers appear in the inspector, but under their name is just a '-' and I can't select the check-box under 'show.' Likewise when I create a button- can't select any individual layers. I've experienced this problem with three different psd files. Anybody seen this before?

    I have just found the same issue.
    For me, I believe it is because the domains are only used in matching rules, which the SSIS task does not support. Therefore they are not in the drop down as the SSIS DQS task cannot use them. Only map domains for data correction and you should be ok.

  • Postfix relay=none, ... status=deferred (Host or domain name not found...

    Hi,
    I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
    I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
    First of all, after computer restart, I don't think postfix starts automatically
    Running 'sudo postfix start' gives me:
    postfix/postfix-script: starting the Postfix mail system
    Looking at '/var/log/mail.log' I find:
    Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
    Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
    Running 'sudo postfix check' does not give me any errors
    Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
    Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
    192.168.1.5
    Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
    Running 'ps aux|grep postfix' gives
    AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
    _postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
    root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
    _postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
    Running 'postconf inet_interfaces' at first gave me
    inet_interfaces = localhost
    which I changed to All in '/etc/postfix/main.cf'
    I looked at http://www.postfix-book.com/debugging.html
    Running 'telnet localhost 25' gives me
    Trying ::1...
    telnet: connect to address ::1: Connection refused
    Trying fe80::1...
    telnet: connect to address fe80::1: Connection refused
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    220 AMs-MBP.local ESMTP Postfix
    quit
    221 2.0.0 Bye
    Connection closed by foreign host.
    But running 'telnet 10.1.2.233 25' gives me
    Trying 10.1.2.233...
    telnet: connect to address 10.1.2.233: Operation timed out
    telnet: Unable to connect to remote host
    Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
    PING 134.169.9.107 (134.169.9.107): 56 data bytes
    ^C
    o
    + 134.169.9.107 ping statistics ---
    28 packets transmitted, 0 packets received, 100% packet loss
    I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
    Please, does anyone have an idea of how to fix this?
    TIA,
    Elle

    Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
    Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
    I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

  • Technical details of permanent failure: DNS Error: Domain name not found

    I have tried to test eprint and keep getting an error.   DNS Error: Domain name not found
    I can print thru my network fine, but I get this error with eprint.  My eprint address ends in hpeprint.co
    Is this correct?

    Found the problem. The printer display shorten my eprint address and dropped the "m" from com. Now to enjot my HP eeprinter.

  • When i queue a file for export the encoder is changing my settings to ACC Audio & my settings are not in the drop down

    when i queue a file for export the encoder is changing my settings to ACC Audio & my settings are not in the drop down. Help

    There's something else going on. When you search, the search box searches the Spotlight database that it created when indexing. It doesn't search the computer again. I suspect a hosed index. System Preferences->Spotlight->Privacy->delete all volumes and readd them back in. That should reindex the computer and all attached HDs. BTW, by default there are many places Spotlight doesn't return information from, mainly the various Library folders and the System folder. If you want to find everything, do this:
    Click on the Desktop, CMD+F, click on Kind button, select Other, drill down to File invisible, check it, continue down to System files, check it, and click OK. Now, click on + button, click on the left-hand item and select System files and select are included, click on the plus button, click on the left-hand item and select File visibility and select visible or invisible, select File Name, save the search, drag its icon to the Dock, and use to search your entire Mac—currently starts with By Name, but Contents is available. I use this instead of CMD+F or CMD+spacebar for all searches.

  • What happened with my photoshop? the layers name disappear and every drop-down function getting smaller?

    What happened with my photoshop? the layers name disappear and every drop-down function getting smaller?

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • TS3276 the images (attachments) are automatically resized (smaller) when I send them to a customer. My email screen does not show a drop down menu box where you can leave as actual size. Is there a setting elsewhere that can be set.

    Any suggestions on problem I have. I receive images, say a file that is 3 mgs through email on Safari mail and when I try to resend it or forward it or any other larger file, when it sends the file is reduced by about 1/3. My screen does not show and drop down menu with a feature to keep actual size or reduce that is suggested when I looked up solutions to the problem.  I can't find a setting anywhere in mail that I can change to make sure my files are kept at actual size. I figure a setting got changed -don't know how - but it happened about a month ago. Caused problems as I work in graphics can't send files to clients as they come out too small. Any suggestions on how to fix.
    Thanks

    What email program are you using? And what do you mean by "Safari mail"?

  • How can I remove apps from my itunes library in version 11.0.0.163? The checkbox is no longer there in the new version and I do not see a drop down menu.

    In the new iTunes version 11.0.0.163 I tried to delete a free app but it still shows after I deleted it from all my Apple devices. The checkbox in the previous version of iTunes does not seem to be present in the new version and I do not see a drop down menu. And there are no Help menu choices either. I guess, I will otherwise wait for the new update to iTunes as of 12.10.2012.

    With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
    This screenshot is from a Mac, but it should be similar on a PC :

  • I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps

    I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...

    I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
    First close Photoshop.
    Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
    It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
    Gene

Maybe you are looking for