Domain not working with AFP anymore

I have Lion Server on a Mac Mini Server with VPN and WEB services enabled... Everything was working fine, then all the sudden I cannot access my AFP shared Drives or my server via my domain. My Domain is hosted through GoDaddy, and the A Host Record is set to my IP address (Main IP not internal Network IP). This is how it was setup before and it worked, and now its not working...
I used to be able to type in www.domainname.com and it would bring up a login so I can remotely access my server files, but now it doesn't work at all... even though the Web and FIle Sharing services are running and nothing has changed...
Any ideas?

I have checked and double checked and my Ports are open and services are running, and my domain is pointed to my IP address (External IP), but I still cannot seem to bring up even the server side pages via the internet. I don't know what changed, but it was working and now its not... Very fustrated...

Similar Messages

My logitech mic does not work with Audition anymore

My Logitech mic does not work with Audition anymore. I had to reformat my hard drive and re install Audition, it is not working any more, I have test the mic with another software and it work fine. help please.

Fixed. Switched card into different slot, not sure exactly what made it work, but it does now.
Go ahead and delete thread if you like.

AIM not working with iChat anymore

(First of all, I'm not sure why this forum only says iChat 3, because when I click on about iChat, I have version 4)
I used to use iChat with AIM and now it has stopped working. It still works with my gmail chat account, but it won't log into my AIM account ever. It always tries logging in a bunch of times and disconnects and then says "you have tried to log in too many times in a short while." It has been doing this for a couple months, but I haven't bothered to try to fix it until now. (I moved to England recently-- I'm not sure if it coincided with that or not but I don't see why it should).
Any ideas?

Hi
Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443.
Log back in again.

KDE Microblogging plasmoid not working with twitter anymore

Can anyone get twitter working with KDE microblogging plasmoid? Since yesterday evening it stopped updating in my case and now when I try to log in I just get an error instead of my feeds.

Box0 wrote:http://bcooksley.blogspot.it/2012/10/tw … lanet.html
Ahh I had a feeling that it might be due to a change in the twitter api. But I can't get it to workn with the new feed either.

External SSD drive not working with mavericks anymore!

The second I upgraded to Mavericks and used my external SSD drive, my external drive stopped working. I also doesnt want to initialize anymore either in disk utility! Can someone from apple please tell me whats going on?

These are user forums and are not monitored by Apple.
Lewis

HP Photosmart R725 not working with iPhoto anymore

When I originally purchased my camera in January it worked perfectly with my iPhoto software on my iBook G4, a couple weeks ago it stopped loading the camera and photos. The application opens when I plug the computer into the USB port, while off and when I turn it on iPhoto opens but the camera does not appear on the list and it doesn't upload photos automatically, or at all. Also, if i unplug my camera from the USB while it's on the camera will pop up in the list but when I try and plug it back in, iPhoto stops responding on me and I have to force quit the application. I've tried different methods of turning on the camera while plugged in and unplugged and opening iPhoto in different ways. I'm wondering if it's the software as there are no more updates outside of purchasing the whole iLife package. If anyone has any insight into this problem please let me know. I love my camera but this is just ridiculous cuz I have several photos saved and have no way of loading them. I've tried updating as I have version 5.0.4, but no luck, probably cuz I'd need to buy iLife, but I just wanna get this to work. Or if anyone knows of problems with the camera itself that I'm not aware of please feel free to share that information so that I can make a better decision as to what to do. Thanks.

Hi there,
As a last resort maybe you should try using Apps > Image Capture to download your photos into a folder on your desktop and import the folder into iPhoto...
Open Image Capture and check preferences...
Good luck, Rick

Mini-DVI does not work with DVI anymore only VGA output

Hi,
I recently started to get problems with external LCDs. It used to work just fine, but now I can only use a mini-DVI-VGA adapter to get any output. This gives me much worse results than digital and makesme a little worried, other things might also stop s
working.
A quick search here and on google didn't give me any ideas how to fix this.
So any help is much appreciated!
Cheers
GerHi

Have you tried a new DVI adapter?

My printer does not work with firefox but does work with explorer

While using ebay I tried to print out a mailing label, and fox fire does not work with it anymore. My printer does work with internet explorer ?

What printer? Does the page appear correctly in Print Preview? What happens when you try to print?

Projectm doesn't work with amarok anymore.

Not the most urgent issue in the world. I was just wondering if this happened to anyone else.

projectm is not working with amarok anymore because the package has been split in libs, xmms plugin and libvisual plugin. also as projectm now requires libvisual 0.4.0 it cannot be built for arch yet. many apps including amarok are not yet properly ported to libvisual 0.4.0 so we stick with 0.2.0.
amarok 1.4.1 in particular has libvisual 0.4.0 support but as a matter of fact crashes a lot when it is enabled. tpowa patched it back to use libvisual 0.2.0 because of that.
in essence, projectm currently does not work with amarok.

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

I have the latest itunes and I use Windows and suddenly after working fine for years, itunes will not synch with OUtlook anymore. Any ideas?

I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

My 4th gen iPod Touch does not work with Ford sync since updating OS

When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

Have lots of issues with Fords MySync and here's some info that might help....
Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
http://www.ford.com/syncmyride/
or call 1-800-392-3673 Opt 3
A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
Good Luck

Adobe Flash Player does not work with Safari. What can I do?

Hi,
I have a MacBook Pro, Retina, 15 inch, late 2013, 2 GHz Intel Core i7, using OS X 10.9.4. I have installed Adobe Flash Player. In my System Preference, in the advanced settings, it is set to install updates also tells me that I have the NPAPI Plug-in (version 14.0.0.145) installed but not the PPAPI Plug-in. Is this the reason why it does not work with Safari (keeps telling me to download the app, which I did but still does not work)? Is there any way I could fix the problem? Please, help.
Thanks.

If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
          When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
          Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
          Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
          Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
          Allow (or Enable) plug-ins
Then click the button marked
          Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
          Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is off

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is turned off.. Any ideas?

Thanks Rudegar,
I only synch and do not stream off of my 1st Gen AppleTV
I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
Will keep working on other fix options (factory reset, etc.)
Thanks again

Import via Drag & Drop not working with LR CC (after Update from 5.7)

I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
This does not work with LR CC anymore.
The longer way via "Import" works fine.
Any suggestions?

With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
What works with your setup doesn't work with mine.
I attached a screenshot:
As you can see (cursor) i can't import the file from the file explorer on the right.
(The file is not already in the catalogue and i am in the library tab grid view mode).
Using Windows 7 x64 prof Service Pack 1

Domain not working with AFP anymore

Similar Messages

Maybe you are looking for