Domain trying to validate against an incorrect server

Hi Guys,
I have a hosted exhcange cluster that has many many many domains all administered by a DC where each domain is an OU under a main OU called Hosting.
For some reason, a few mailboxes of a certain OU (not all the mailboxes) are tryong to validate against the domain associated with that OU. Meaning that if for example, The people in that OU has a domain called abcd.com and my mailserver is myexchange.com,
Those specific mailboxes are triying to connect to abcd.com and not to the mail server. I can't think of anything that might cause such a bizzare error. Any ideas?

Still I think, I need more info/not able to understand the real issue :)
1. Are you facing the autoconfiguration issue for other mailboxes also?
2. Do you have Outlook anywhere enabled? If so, do an outlook connectivity test through
www.testconnectivity.Microsoft.com
3. if the domain name selection box is grayed out, still you can enter the name like domainname\username and password
Regards from Visit ExchangeOnline |
Visit WindowsAdmin
1) No, only some mailboxes on this specific domain.
2) The connectivity test passed succesfully
3) It shoudln't be connecting to a domain to begin with, it lists their domain as the server it tries to connect to! it should be connecting to the exchange server and no the client's FQDN.

Similar Messages

Trying to configure a Win 2003 Server to use TLS server authentication . . .

I am trying to
configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
Method 2: By using the Certificate Request Wizard
The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
You want to request a certificate from an Enterprise Certification Authority.
You want to request a certificate that is based on a template where the subject name is generated by Windows.
You want to obtain a certificate that does not require administrator approval before the certificate is issued.
To obtain a certificate, follow these steps:
Click Start, click Run, type mmc, and then click OK.
On the File menu, click Add/Remove Snap-in.
Click Add, click Certificates, and then click Add.
Click Computer account, and then click Next.
If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
computer, and then type the name of that remote computer in the Another computer box.
Click Finish.
In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
Snap-in dialog box.
Under Console Root, click Certificates (Local Computer).
Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
On the View menu, click Options.
In the View Options dialog box, click Certificate purpose, and then click OK.
In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
In the Certificate Request Wizard that starts, click Next.
In the Certificate types list, click Server Authentication, click to select the Advanced check box,
and then click Next.
In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
I get as far as step 11 and I get the error message:-
The wizard cannot be started because of one or more of the following conditions:
- There are no trusted certification authorities (CAs) available.
- You do not have the permissions to request certificates from the available CAs.
- The available CAs issue certificates for which you do not have permissions.
This is covered in KB 927066 – see below:-
To resolve the problem, follow these steps:
Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
To do this, follow these steps:
Click Start, click Run,
type Dsa.msc, and then click OK.
In the left pane, click the Users container.
Verify that the CERTSVC_DCOM_ACCESS group is in the right
pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
Domain Users
Domain Computers
If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4.
Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
do not have sufficient DCOM permissions.
Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
authority.
Click Start, point to Program,
point to Administrative Tools, and then click Component Services.
Expand the Component Services node.
Expand the Computers node.
Right-click the My Computer node, and
then click Properties.
Click the COM Security tab.
Under Access Permission, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
Remote Access permissions, and then click Cancel.
Under Launch and Activation Permissions, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
Remote Activationpermissions, and then click Cancel.
Click Cancel, and then close the Component
Services console.
Settings may be incorrect if any one of the following conditions is true:
The CERTSVC_DCOM_ACCESS group does not exist.
The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
net stop certsvc
net start certsvc
Repeat steps 1 through 3 to verify that all the settings are correct.
Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
The only part of the above instructions which I have not been able to complete is:-
“you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

Hi Nick,
Have you successfully set up an enterprise CA?
If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
Best Regards,
Amy

Server failed to start: The domain path does not match the running server

Hi,
I've configured Eclipse to run my local weblogic - which actually is working fine.
The server starts as intended and reaches state RUNNING.
As soon as this happens, OEPE tries to validate the server and compares the identified server's configuration to the expected configuration.
This finally results into the error message shown in the subject -- though server is still running.
!MESSAGE Server watcher[Oracle WebLogic Server 11gR1 PatchSet 1 at localhost]:The domain path does not match the running server.
Domain RootDirectory retrieved from the MBean of running server is: N:\Oracle\MIDDLE~1\USER_P~1\domains\MYWEBL~1\
Domain RootDirectory of this server: N:\Oracle\Middleware\user_projects\domains\myWeblogicServer
Obviously this seems to be an issue with the length of the directory and file names. The domain's configuration and all its start scripts do not have any 8+3 pathes, like USER_P~1 for user_projects. Nevertheless the MBean of the server returns such a "truncated" path which in turn is invalid for OEPE.
Fix: When setting up the domain in Eclipse, try using that 8+3 representation of the domain's location. Then the comparison will succeed...
My Question: Where do we need to ask for a fix in OEPE? The 8+3 path is still a valid one ...
Best Regards
Philipp

I haven't been able to reproduce this and 8+3 representation of the domain's location shouldn't be required.
Can you provide more information:
- is this a network drive?
- what is your OS: XP, Vista, Win7?
- what is the Windows file system type, is it FAT or NTFS
- Can you try install WLS on C:, e.g. C:\Oracle\Middleware\user_projects and see if it still happens?

I am trying to remote into a Windows Server 2003 from a Windows 7 machine and having issues

I am trying to remote into a Windows Server 2003 from a Windows 7 machine. It says "The terminal server has exceeded the maximum number of allowed connections".
My first stop in trying to solve this problem was here:
[URL="http://www.howtogeek.com/howto/windows/command-line-hack-for-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"]howtogeek.com[/URL]
And it says:
[I]
[INDENT]This problem happens because Windows only allows two remote terminal services connections when you are in administrative mode, and you’ve either got two people already on that server, or more likely, you’ve got a disconnected session that still thinks
it is active.
The problem with this error is that you have to actually get on the server console to fix the problem if the server isn’t in a domain. ([B]If you are in a domain, then just open Terminal Services Manager and log off or disconnect the sessions[/B])[/INDENT][/I]
So it seems to suggest that all I have to do really is to run the Terminal Services Manager but I cannot find it.
This web site from mssqltips.com [URL="http://www.mssqltips.com/sqlservertip/1981/remote-desktop-error-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"](click here)[/URL] says all I need to do is first execute "mstsc /
admin" from the command line. But, when I do that, I get a message when I try to remote to the server, that says this: "To log on to this remote console session, you must have administrative permissions on this computer".
So, what now? What do you suggest?

Hi Bobby,
Yes, it is by design. By default, Windows Server only accepts two concurrent administrative sessions (Administrative Mode). It means that only two administrators can work on the server at
the same time.
If you would like more concurrent sessions, you need to purchase RDS CALs, install Terminal Services related server roles with proper configurations on the server.
Remote Desktop for Administration (server 2003)
http://technet.microsoft.com/en-us/library/cc785186(v=ws.10).aspx
What Is Terminal Services?
http://technet.microsoft.com/en-us/library/cc782486(v=ws.10).aspx
Terminal Services Configuration
http://technet.microsoft.com/en-us/library/cc787078(v=ws.10).aspx
Purchase client access licenses
http://technet.microsoft.com/en-us/library/3660ac5a-7468-48d3-b7e8-5529de8fb6c5
Thanks.
Jeremy Wu
TechNet Community Support

ERROR: "info.plist does not validate against DTD"

Hi! I got this error if anyone has it solved Please HELP.
I am trying to package a WRT widget using Nokia WRT extension for Adobe Dreamweaver. This is the place for info on the extension: http://www.forum.nokia.com/Tools_Docs_and_Code/Tools/Runtimes/Web_Runtime/
I figure developer from here who use DW to develop mobile content might know the error.
When come to the step of 'Package Nokia WRT Widget' I got this error: info.plist does not validate against DTD
and a page of error info shown like this:
DTD validated at: Wed Jun 17 2009 19:03:00 GMT+0800 (Malay Peninsula Standard Time)
DTD used for validation: http://www.nokia.com/DTDs/plist-1.0.dtd
Line
Column
Message
Explanation
Source
2
95
DTD did not contain element declaration for document type name
3
16
Attribute "version" exists, but can not be used for this element.
3
21
element "plist" undefined. Did you mean "applet" or "strike"?
4
7
element "dict" undefined. Did you mean "strike" or "input"?
5
7
element "key" undefined. Did you mean "strike" or "blockquote"?
6
10
element "string" undefined. Did you mean "strong" or "strike"?
7
7
element "key" undefined. Did you mean "strike" or "blockquote"?
8
10
element "string" undefined. Did you mean "strong" or "strike"?
9
7
element "key" undefined. Did you mean "strike" or "blockquote"?
10
10
element "string" undefined. Did you mean "strong" or "strike"?
11
7
element "key" undefined. Did you mean "strike" or "blockquote"?
12
10
element "string" undefined. Did you mean "strong" or "strike"?
13
7
element "key" undefined. Did you mean "strike" or "blockquote"?
14
9
element "true" undefined. Did you mean "textarea" or "tr"?
Can anyone knows what this means and how i can solve it?
Please help. Thankyou.
note: I am new here and knows that keep asking quesion without giving back is not good but I have a deadline here and wanted to finish the job. I will read some other post and try to help in return when I am able to do so.

Hi pziecina,
Thanks for your reply,
I suspect my problem is the installation or setup of my system or software. as the result i tested is not by doing any scripting at all. All I did is following one of their example exactly (http://www.forum.nokia.com/Tools_Docs_and_Code/Tools/Runtimes/Web_Runtime/Dreamweaver_Exte nsion/QuickStart.xhtml) and package strightaway without modifying the code. because I want to make sure i got the extension install correctly. even so by packaging one of their ready make example already yield this error.

Plants are needed to validate against company in Component Tab - IW31

Hi Experts ,
Module PM , T Code IW31 ,
Plants are needed to validate against company in Component Tab and need to populate error message in status bar . Thereafter user possible to correct whatever the error and save it .
Can you please help me to solve this issue.
Component Data is populated in Data grid (Data Table). These user exits are not fired within a loop( Not repeating with line of components).
Is there way to read whole table ?
Already i tried BADI -IW O1_ORDER_BADI and
exit -
PRM0003 User field: Maintenance plan
WO10001 Create a PM sub-order
WO10002 PM maintenance order: Customer check for order release
WO10004 Maintenance order: Customer check for order completion
WO10005 Maintenance order: Cust.-specif. determination of profit ctr
WO10006 Maint. order: Fcode exclusion through cust. enhancement
WO10007 Maint.order: Customer enhancement - permits in the order
WO10008 Cust. enhancement: Determination of tax jurisdiction code
WO10009 PM Order: Customer Check for 'Save' Event
WO10010 Maint. order: Cust. enhancement for determining WBS element
WO10012 Maintenance order: Priority handling on central header
WO10015 Maintenance order: F4 Help for user fields on operation
WO10016 PM Order: Cust. enhancement to check operation user fields
WO10017 Determine external order number by customer logic
WO10018 Maintenance order: User fields on order header
WO10020 Maintenance order: Automatically include task list
WO10021 Automatic task list transfer when creating order from notif.
WO10022 Determine calendar from user exit
WO10025 PM/SM order: Finding responsible cost center
WO10026 User check on setting status 'Do not perform'
WO10031 Hide personnel number in PM/SM order
WO20001 PM order: User exit to pass routing to order
EXIT_SAPLCOMK_004 (Enhancement - CNEX0013)
COZF0002
COZF0001
Thanks,
Rehan

Hi,
I am not completely clear with ur question, i think system will give message if component is selected from other company code, but if ur looking for something specfic ..check the below
CNEX0037 : Check a newly assigned component.
CNEX0038: Check a changed component.
regards
pushpa

An Active Directory error 0x51 occurred when trying to check the suitability of server

We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
when opening up Exchange Management Console on one of the exchange 2010 server.
"An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
response: The LDAP server is unavailable.'
dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message.
If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
to point it to the correct domain controller using power shell?

I fixed it for myself.
Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller

Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit

1.I want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
2.I have followed the steps too as described here in these two forum links:
1.http://cn.forums.oracle.com/forums/thread.jspa?threadID=2245015
2.Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit
3.I am giving my installtion steps..
I have installed JDK: 1.7.0.
I have succesfully installed web logic version wls1035_generic.jar.
I have also installed the FMW version 11.1.1.2.0 using all four disks(Install and donot configure.)
I have also installed patch version 11.1.1.3.0.
But When I am trying to run config.bat then It Stops at Creating Domain at 0%,nothing happens, process is sleeping:
It creates domain of size 9.23 mb and after a long time of approx 900 min It displays "DOMAIN CREATION FAILS".
I have also checked the path ..It doesnt contains any special characters.
Any ideas???

Hi John,
As per ur suggestion , I have successfully installed FMW 11g in Windows server without Domain Fail.
1). Installed JDK 1.6u29
2). Installed WebLogic 10.3.3
3). Installed FMW 11.1.1.2
4). Installed FMW 11.1.1.3 Patch
Now According to the Business need ,I want to install FMW 11.1.1.2 in Linux 32 Environment. Can U please guide me the versions of Java, Weblogic, FMW and its patch so that I can Install it in Linux 32 bit without Domain Fail.
Deepak Jha

Error installing OAM against Sun Directory Server 6.3: No such object (32)

Hi folks,
I'm getting error installing OAM 10.1.4.3.0 (Linux, 64 bit) against Sun Directory Server 6.3. I've followed Oracle troubleshooting doc (http://download.oracle.com/docs/cd/E15217_01/doc.1014/e12493/trouble.htm#BABBAAFH), and replaced every occurrence of cn=userRoot with cn=my_company_name inside iPlanet5_oblix_index_add.ldif. I still get the same error "ldapmodify: No such object (32)" for every entry in the file. Has someone managed to get it to work?
Thank you, Roman

Hi folks,
I got it to work, here're the steps:
1. After loading the schema file, follow the article (http://download.oracle.com/docs/cd/E15217_01/doc.1014/e12493/trouble.htm#BABBAAFH, not the doc 552157.1 as it states incorrect info, sorry
Notoriuos) to edit the index file (iPlanet5_oblix_index_add.ldif) and replace all occurrences of "userRoot" with "your_company_name" (which is your ldap suffix without the c=us part as in
o=your_company_name, c=us) using vi command:
:%s/userRoot/your_company_name/g
2. run ldapadd (not ldapmodify! as all but the one last object listed on the dn: line might already exist under cn=config), here's example:
$ ldapadd -x -h your_ldap_host -p your_port -c -f IdentityServer_install_dir/identity/oblix/data.ldap/common/iPlanet5_oblix_index_add.ldif -D "cn=directory manager" -w directory_manager_passwd
3. If done right, you should see smth like this:
adding new entry "cn=obactionname,............... per every entry in the index file
HTH
Roman

Client still trying to use obsolete Software Update server

I was experimenting with Mac OS X Server, including the Software Update Server and setting up managed client computers. After some testing, I decided that Mac OS X Server was too complex for our needs and switched the server back to standard Mac OS X. I also removed the server from the Directory Access settings on my client machine, and rebooted.
I thought this was enough to clean up my client machine, but it is still trying to access the Software Update Server on my test server. I can tell this by running softwareupdate from the command line:
dalba ~> softwareupdate --list
Software Update Tool
Copyright 2002-2005 Apple
2007-03-07 09:29:24.219 softwareupdate[353] Loading CatalogURL http://purr.local:8080/index.sucatalog
2007-03-07 09:29:28.804 softwareupdate[353] loader:didFailWithError:NSError "can’t find host" Domain=NSURLErrorDomain Code=-1003 UserInfo={
NSErrorFailingURLKey = http://purr.local:8080/index.sucatalog;
NSErrorFailingURLStringKey = "http://purr.local:8080/index.sucatalog";
NSLocalizedDescription = "can\U2019t find host";
can’t find host
I can't figure out where this setting is being stored so that I can erase it. I've already tried using the Restore Default feature of Software Update Enabler <http://www.wiretapped.net/~proton/suenabler/>, but that hasn't fixed the problem, even after resetting all three preference domains (Current User on This Computer, Current User on Any Computer, and All Users on This Computer) and restarting. I've searched through /Library/Preferences for the string "purr.local" and didn't get any hits.
Any clues as to where this setting is being stored, or how to erase it?
--Stuart
PowerBook G4 17" Mac OS X (10.4.8)

I think I just solved my own problem.
There are settings in /Library/Managed Preferences that aren't reset by Software Update Enabler. In particular, I had a file named "/Library/Managed Preferences/samalone/com.apple.SoftwareUpdate.plist" that contained the obsolete server setting for Software Update. In my case, I don't want to have managed preferences anymore, so I just deleted the entire /Library/Managed Preferences folder and restarted.
--Stuart

Unable to validate against XML schema-URGENT!!!!

Hi,
I'm new to JAXP. I've been trying to validate an XML document against a Schema. But the error I get is as following:
java Schema org.xml.sax.SAXNotRecognizedException:
Property: http://java.sun.com/xml/jaxp/properties/schemaLanguage
at org.apache.crimson.parser.XMLReaderImpl.setProperty(XMLReaderImpl.java:272)
at org.apache.crimson.jaxp.SAXParserImpl.setProperty(SAXParserImpl.java:190) at Schema.main(Schema.java:20)
I understand that this problem is because my system is using the old default Crimson parser.
could some one please help me out with installing and using the latest Xerces parser.
1. I have jdk 1.4.2
2. I have JWSDP 1.4( can the jar files there help or do I have to download the jar's from apache?)
3. please let me know the full trouble shooting process including where should I place the jar files or how should I set the classpath.
4. would this affect validating against a DTD(which works fine now)
thanks in advance.
cheers
R43

JAXP SAXParser produces the error
java Schema org.xml.sax.SAXNotRecognizedException:
Property: http://java.sun.com/xml/jaxp/properties/schemaLanguage

I am trying to download iOS 5.1 on my iPhone and iPad. Both times it tries connecting to the software update server and just hangs there. I've tried doing both over wifi and get error message. What do I do?

I cannot download the ios 5.1. I'v tried doing it through itunes after downloading the latest itunes. It says that my phone and ipad both have new updates and tries to coonect to update software server. That is where it hangs up and just keeps trying to connect but never does. Then when I try to update my devices over wifi, it tries and thens gives me a download failed message after a few minutes. What do I do?

This has solved loads of people who have this issue and have used an alternate DNS setting. Below are instructions for both iPhone OTA and on you Mac
If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
You can use OpenDNS
208.67.222.222
208.67.220.220
or
You can Google Public DNS if you want
8.8.8.8
8.8.4.4
I have actually repointed my routers DNS so all my devices now point to OpenDNS servers

Path does not exit - While trying to save file on SharPoint Server 2013 from client machine

Hi,
I have installed Microsoft SharePoint Server 2013 Enterprise Edition on my testing Lab environment (On VM Workstation 10) on Windows Server 2012 with SQL server 2012, I can access all files stored at SharePoint Server from any physical machine, I can share
a single file among different people to work simultaneously, but here i stuck on saving any file from client machine to directly on SharePoint Server, Attached is the snap shot, whenever I try to save any file directly It says Path Does Not Exist, If I drag
and drop any file directly to SharePoint I do not see any error message.
I read from different posts that I need to Enable Desktop Experience Feature on Server 2012, which I installed but no positive result gained :(
I will appreciate for any possible help?
Ali

Hi Ali,
Please try disabling the protected view per the link below and test the issue again:
http://social.technet.microsoft.com/Forums/en-US/b8381a19-3394-406f-8adb-1976f45460ef/path-does-not-exit-while-trying-to-save-file-on-sharpoint-server-2013-from-client-machine?forum=sharepointgeneral
You could simply type the url as http://sp/sites/sitename in the Filename place.
Regards,
Rebecca Tu
TechNet Community Support

My creative cloud subscription is over, and I'm trying to open up Adobe Photoshop CS6 which I got from my Adobe Creative Suite 6 Design & Web Premium - Education Edition, but it keeps trying to validate my creative cloud when I know it's expired. What do

My creative cloud subscription is over, and I'm trying to open up Adobe Photoshop CS6 which I got from my Adobe Creative Suite 6 Design & Web Premium - Education Edition, but it keeps trying to validate my creative cloud when I know it's expired.
What do I do? Help ):

How do I prevent Creative Cloud from taking over my CS6 perpetual license?
https://forums.adobe.com/thread/1584746

Trying to Validate the name of a file with a Validator

Hi, Im trying to validate an file name that is sent with a form
I want that the Validator Checks if the filename ends with some extensions (.jpg ,etcc) for only addmit one type of files (images)
I ve build my own Pluggable Validator , but I dont know how to extract the filename from Validator.
Can anyone help me??
the Code is something like this
where
package jmar5439.webpage.validator;
import javax.servlet.ServletContext;
import javax.servlet.http.HttpServletRequest;
import java.io.Serializable;
import org.apache.struts.action.*;
import org.apache.commons.validator.ValidatorAction;
import org.apache.commons.validator.*;
import org.apache.commons.validator.Field;
import org.apache.commons.validator.GenericValidator;
import org.apache.commons.validator.util.ValidatorUtils;
import org.apache.commons.validator.Validator;
import org.apache.struts.validator.Resources;
import org.apache.commons.logging.LogFactory;
import jmar5439.webpage.action.InsertRoomAction;
import org.apache.commons.logging.Log;
public class ImageFileValidator implements Serializable {
// public ImageFileValidator() {}
public static boolean validateImageFile(Object bean, ValidatorAction va,
Field field, ActionMessages errors,
HttpServletRequest request, Validator validator) {
String value = null;
if (field.getProperty() != null && field.getProperty().length() > 0) {
value = ValidatorUtils.getValueAsString(bean, field.getProperty());
String file = new String(value);
file = file.toLowerCase();
if (!GenericValidator.isBlankOrNull(value)) {
try {
if (!file.endsWith(".jpeg") || !file.endsWith(".gif") ||
!file.endsWith(".jpg")) {
errors.add(field.getKey(),
Resources.getActionMessage(request, va,
field));
return false;
} catch (Exception e) {
errors.add(field.getKey(),Resources.getActionMessage(request, va,field));
return false;
return false;
return false;
I ve declared
<form-property name="file"
type="org.apache.struts.upload.FormFile"/>
in struts-config file and
<field property="file"
depends="imagefile">
in validate file.
Thanks

I ve solved like this
package jmar5439.webpage.validator;
import javax.servlet.ServletContext;
import javax.servlet.http.HttpServletRequest;
import java.io.Serializable;
import org.apache.struts.action.*;
import org.apache.commons.validator.ValidatorAction;
import org.apache.commons.validator.*;
import org.apache.commons.validator.Field;
import org.apache.commons.validator.GenericValidator;
import org.apache.commons.validator.util.ValidatorUtils;
import org.apache.commons.validator.Validator;
import org.apache.struts.validator.Resources;
import org.apache.commons.logging.LogFactory;
import jmar5439.webpage.action.InsertRoomAction;
import org.apache.commons.logging.Log;
import org.apache.struts.upload.FormFile;
import org.apache.commons.beanutils.PropertyUtils;
import java.lang.reflect.*;
public class ImageFileValidator implements Serializable {
// public ImageFileValidator() {}
public static boolean validateImageFile(Object bean, ValidatorAction va,
Field field, ActionMessages errors,
Validator validator,
HttpServletRequest request) {
Log log = LogFactory.getLog(ImageFileValidator.class);
//log.info(form.toString() );
String value = ValidatorUtils.getValueAsString(
bean,
field.getProperty());
if (!GenericValidator.isBlankOrNull(value)) {
try {
FormFile file = (FormFile) PropertyUtils.getSimpleProperty(bean,
"file");
String filename=file.getFileName().toLowerCase() ;
//log.info("Filename:" + file.getFileName());
if (filename.endsWith(".jpeg") ||
filename.endsWith(".jpg") ||
filename.endsWith(".gif")) {
log.info("return true");
return true;
} else {
errors.add(field.getKey(),
Resources.getActionMessage(request, va,
field));
log.info("return false");
return false;
} catch (NoSuchMethodException ex) {
errors.add(field.getKey(),
Resources.getActionMessage(request, va,
field));
return false;
} catch (InvocationTargetException ex) {
errors.add(field.getKey(),
Resources.getActionMessage(request, va,
field));
return false;
} catch (IllegalAccessException ex) {
errors.add(field.getKey(),
Resources.getActionMessage(request, va,
field));
return false;
//return false;
// log.info("Entra0");
/* if (field.getProperty() != null && field.getProperty().length() > 0) {
// log.info("Entra");
// value = ValidatorUtils.getValueAsString(bean, field.getProperty());
value = ValidatorUtils.getValueAsString(bean, field.getProperty());
String file = new String(value);
file = file.toLowerCase();
if (!GenericValidator.isBlankOrNull(value)) {
// log.info("Entra2");
try {
if (!file.endsWith(".jpeg") || !file.endsWith(".gif") ||
!file.endsWith(".jpg")) {
errors.add(field.getKey(),
Resources.getActionMessage(request, va,
field));
//log.info("Entra3");
return false;
} catch (Exception e) {
errors.add(field.getKey(),Resources.getActionMessage(request, va,field));
return false;
return false;
// return true;
} else {
return false;
Remember to visit
http://www.lloguerjove.com
and
http://www.alquilerjoven.com

Domain trying to validate against an incorrect server

Similar Messages

Maybe you are looking for