Domain Users are allowed by default to join domain

Hi everyone !
Recently i install Windows Server 2012 Standard
Configure Active Directory Domain Services
Create simple user "test1"
then i go to windows 7 client and join domain with this "test1" user.
and i shocked how is it possible that a simple domain user which is not a part of any domain admin or admin group and can join or rejoin domain successfully.
Help me to get out of this how can i restrict simple domain user to join domain and why it was by default ?

> then i go to windows 7 client and join domain with this "test1" user.
By default, EVERY user can join up to 10 clients to the domain.
> and i shocked how is it possible that a simple domain user which is not
 Why shocked? What's the issue when users join computers to the domain?
> Help me to get out of this how can i restrict simple domain user to join
> domain and why it was by default ?
Create a GPO, link it to the domain, move it up to above "Default Domain
Policy" and configure Computer - Policies - Windows Settings - Security
Settings - Local Settings - User Rights Assignment: Add Workstations to
the domain.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

  • SQL 2012 sp2 "The permissions granted to user 'DOMAIN\user' are insufficient ..."

    1st let me set the tone by admitting I am not real familiar with SQL, I'm more of an Operations Admin. So this is not a new question I think, although I am having difficulty finding an applicable solution.  Using SQL Server 2012 sp2 on a Windows
    2012R2 server.  This is configured to be a SCOM DB server; while on the SQL server itself I open IE and attempt to go to the following URL http://scomsql/reportserver_SCOM I get the
    following error.
    Reporting Services Error
    The permissions granted to user 'DOMAIN\user' are insufficient for performing this operation. (rsAccessDenied) Get Online Help
    SQL Server Reporting Services
    I have looked at the Reporting Services Config. Mgr. and it looks like the Report Mgt. URL is set for port 80 and no SSL is configured.  The rsreportserver.config file has the SecureConnectionLevel set to "0"
    My domain account is listed under Security\Logins and holds the 'Server Roles' of public and sysadmin, 'User Mapping' is DBO for the 'ReportServer$SCOM' and 'ReportServer$SCOMTempDB' and the role membership shows db_owner and public for these as well.
    Any assistance with getting this working would be greatly appreciated.
    # When I wrote this script only God and I knew what I was doing. # Now, only God Knows!

    Hi Wasisname,
    The Reporting Services error rsAccessedDenied occurs when a user does not have permission to perform an action. To troubleshooting this issue, please make sure that you have sufficient permission and the report server name is correct.
    In fact, reporting Services uses role-based security to grant user access to a report server, and there are two types of roles: Item-level roles and System-level roles. On a new installation, only local administrators have access to a report server. In order
    to grant access to visit the URL http://server:port/ReportServer to users, a local administrator must create a role assignment to define the tasks a user can perform. To solve this problem, please refer to the
    following steps:
    Start Report Manager by going to URL
    http://scomsql/reportserver_SCOM.
    Click Site Settings at the top right of the page.
    Click Security in the left pane.
    If a role assignment already exists for the user, click Edit.
    Otherwise, click New Role Assignment. In user, enter the user account.
    Select appropriate access, and then click Apply.
    The issue may be caused by the UAC or Internet Explorer security setting, please try to follow this steps:
    1. Open the Internet options of the IE and add the report server URL into trusted site in the Security tab.
    2. Run the IE as administrator.
    Besides, if the user need to have access to reports, folders, models and shared data sources, we can assign Item-level roles on the root node (the Home folder) or on specific folders or items.
    For more information about Configuring a Native Mode Report Server for Local Administration, please refer to the following document:
    http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.
    Wendy Fu
    TechNet Community Support

  • CR Add-on 2.0.0.7 Problem: Only Super Users are allowed access ...

    Hi Everybody,
    We have installed the latest ( to my best understanding) version of CR Add-on (2.0.0.7 , compiled for 64 bit , downloaded from Richard Duffy's blog) and we are receiving the error message "Only Super Users are allowed access to this function" .
    We've checked that the users are all Super Users and they have Professional and Addon licenses.
    The only relevant thread I've found in forums solved the issue by installing the latest version of CR Add-on, which we've did.
    The installation is  B1 2007 A SP001 ,PL 11.
    Any ideas will be highly welcomed.
    Thanks in advance,
    Simon

    We have the same issue, this happens when you go to Administration > Crystal Reports
    We can't see the reports in CR
    Please if you have a solution tell me.
    Thx and Regards,

  • When adobe XI is purchased how many users are allowed?

    when adobe XI is purchased how many users are allowed?

    Hi RSC-CFDL,
    You can install Acrobat XI software on up to two computers. These computers can be you office computer and home computer.
    Regards,
    Sumit

  • Some external Users are getting Duplicate Emails from our domain

    Some external Users are getting Duplicate Emails from our domain. I have Exchange 2013 and is properly configured. A user reported me that, I sent one email to the other domain's user, and it was delivered twice after 1 or 2 hours.  I checked the Message
    track log on exchange servers and email was resubmitted and sent from the edge server after 2 hours.
    I have no idea why this is happening? can you please help me on this issue.

    Hi Aleem,
    Maybe some hidden rules cause this, I suggest use MFCMapi tool to double check whether there is any hidden rules exist.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • How many concurrent users are allowed for an Azure Virtual Machine?

    How many concurrent users are allowed for an Azure Virtual Machine?
    Please share the details with the Azure VM size. Currently I have Standard VM of size D13(4 cores, 28GB RAM)

    Hi SanPSK,
    Thanks for posting here.
    I suggest you to check this article for Azure VM size
    https://msdn.microsoft.com/en-us/library/azure/dn197896.aspx
    For the concurrent users on VM - A maximum of 2 concurrent connections are supported, unless the server is configured as a Remote Desktop Services session host.
    Girish Prajwal

  • Domain Users are not able to log in to Domain Computers - Administrators are able to do so

    I have Primary Domain Controller and Secondary one, The users can log in to both as I have changed the locally Policy to allow Domain users to log in. 
    But I am having problem with users who can not log in to computers joined the domain. I noticed that ONLY Administrators allowed to log in locally in the Policy and if want to add users, i will not be able to do so as Adding Users or Group is Disabled. 
    Advise is appreciated. 

    Hi,
    Please follow the below steps for checking whether either "Allow Logon Locally" or "Deny Logon Locally" is enabled in the default policy, 
    1. Go to start -> run -> tupe GPMC.MSC, to open Group Policy Management Console.
    2. In the  Group Policy Management Console,right click and edit the default policy and navigate to the node "Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment".
    3. In the "User Rights Assignment" node, check whether the options "Deny log on locally" or "Allow Logon Locally" are
    defined and groups added to those options to confirm the logon problem of domain users.
    NOTE: Also check the local policy, as you have mentioned "I have Primary Domain
    Controller and Secondary one, The users can log in to both as I have changed the locally Policy to allow Domain users to log in." 
    Regards,
    Gopi
    www.jijitechnologies.com

  • Why domain users account allowed to logon to servers directly?

    I'm using Windows Server 2008 R2 with ADDS.
    By default, normal user account (domain users) should not be allowed to logon to Server directly, I mean the physical server or via RDP. They should get the message:
    "You cannot log on because the logon method you are using is not allowed on this computer"
    I had checked the GPO, under the Computer Configuration -> Windows Setting -> Local Security Policy -> Local Policy -> User Rights Assignment -> Allow Log on Locally, here only contains:
    Administrators, Account Operators, Backup Operators, Server Operators, Print Operators
    And, nothing set on the Deny Logon Locally.
    But, tested that, those accounts with just Domain User Group are able to logon to Server!?
    How or where should I check, to not allow normal user account to logon to server directly?
    Thank you.

    Hi,
    >>By default, normal user account (domain users) should not be allowed to logon to Server directly, I mean the physical server or via RDP.
    By default, standard domain user accounts can log onto workstations and member servers, and they can’t log onto domain controllers unless we allow them to do so via group
    policy.
    By default, standard domain user accounts can’t remote desktop onto other computers unless they have been added to Remote Desktop User groups of the computers.
    Regarding allowing log on locally, the following article can be referred to for more information.
    Allow log on locally
    http://technet.microsoft.com/en-us/library/cc756809(v=ws.10).aspx
    Regarding remote desktop user groups, the following article can be referred to for more information.
    Configure the Remote Desktop Users Group
    http://technet.microsoft.com/en-in/library/cc743161.aspx
    >>How or where should I check, to not allow normal user account to logon to server directly?
    We can utilize group policy setting
    Deny logon locally to prevent users from locally logging onto the targeted computers.
    Regarding this setting, the following article can be referred to for more information.
    Deny logon locally
    http://technet.microsoft.com/en-us/library/cc957048.aspx
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards,
    Frank Shen

  • The permission granted to user "Domain\user" are insufficient for performing this operation(rsAccessDenied)

    Hello All, 
    I believe this is a very frequently-asked question in SSRS, maybe the more famous one. For many times, I solved it for others.
    But today, I spent one afternoon on this issue, unresolved. 
    My environment: SSRS 2008R2, DB in local default instance(SQL2008 R2)
    My windows account and one of my service accounts(launching my SSRS) are both in local admin group. 
    After configuring the  SSRS, in local server, open IE(run as administrator, using my domain service account) to access "http://localhost/reports". It pops this error: 
    The permissions granted to user 'Doamin\myServiceAccount' are insufficient for performing this operation. (rsAccessDenied)Get Online Help
    Going back to my desktop, Open IE using my windows account to access "http://servername/reports", seeing the the same error and saying my windows account doesn't have sufficient permission on that server
    On Server side, use SSMS to connect local report service, and try to check who is in "system administrator" in SSRS instance, it pops up the error as below, 
    The permissions granted to user '' are insufficient for performing this operation. (rsAccessDenied) (Reporting Services SOAP Proxy Source)
    If using IE to reach "http://localhost/reportserver"(Web Service page), both my windows account and service account work--it doesn't complain anything. 
    Checked all things I know, still seeing this error. Notice my windows account and my service account are both in local admin group.
    Anyone can share some thoughts on this?
    Derek

    Figured out finally.
    In rsreportserver, we put in our custom code of security control as below.
    <Security>
                    <Extension Name="Windows"Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization,
    Microsoft.ReportingServices.Authorization"/>
                      <!--<Extension
    Name="Windows" Type="XXX.ReportingServices.Authorization.Authorization, XXX.ReportingServices.Authorization"/>-->
                </Security>
    When I flipped it back to native mode, it works. 
    Thanks all your replies.     
    Derek

  • Users are able /not able to join Flexconnect APs

    Hi Community ,
    I have 2504 controllers(.6) at central office and remote APs have joined the Controllers . Flexconnect is Up and working . Problem is I can see some users are able to connect to some flexconnect APs but not to some other APs in the remote side .
    What is the reason for this type of behavior ?

    You don't happen to have a topology do you? Are you saying you have 6 x 2504's? Why so many? Flex APs are they doing local switching? Do you have VLANs identified on all the FLEX APs? Are the FLEX APs connected to a switch port that allows trunking if they are doing local switching?  How are the clients authenticating central or local AAA server? 
    Really need a L2/L3 topology even pencil sketch to help answer this.
    ~ Please rate helpful post ~

  • How many concurrent users are allowed in 8.1.7

    Hi All,
    I need to find out how many users can log into a 8.1.7 database. Can anybody help me with this?
    Its a 8.1.7 database running on Sun 5.9
    Any help would be very appreciated.

    What Joel said is true but you may also need to set a couple of init.ora parameters for sessions, processes. Oracle provides a couple of parameters that can be used to limit connections: license_max_sessions, license_max_users, and license_sessions_warning.
    See the Oracle 8.1.7 Reference manual for details on the parameters.
    HTH -- Mark D Powell --

  • How many user licenses are allowed under Creative Cloud TEAM?

    I have at least five employees, maybe a few more, who would be using the various applications available. Much of the time they would all need to be working in the same application simultaneously. Three of them are on Macs, two are using PCs. How many subscriptions to Creative Cloud Team do I need to cover this? From the information I have sifted through, I see that one user license means that there is some way an individual user is identified and that user can install the software on two different machines. Is that correct? Then, how many actual different "users" are allowed on one subscription of the TEAM?
    I also see information regarding "seats" and "devices". I suppose "seats" is another term for individual user? And "devices" is whatever machine, be it computer, iPad, etc.
    All I want to know is the Team version going to cover my needs or do I need to go to Enterprise? Or what?

    You can buy as many number of seats as you wish to. Each seat is assigned to one User by sending an invite & the the User accepts the invite from his mail.
    Each seat has 100 GB of storage space. Each User can activate CC twice. Hence the users can use the same app at the same time as they will be logged with their own Adobe ID .
    Creative Cloud Help | Creative Cloud for teams
    http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html
    Regards
    Rajshree

  • Difference between Domain\Domain Users and Everyone Group in SharePoint

    Hi,
    In SharePoint 2013, is Everyone Group an AD group ? Please help with details.
    Thanks
    srabon

    Hi All,
    Domain Users, Authenticated Users, or Everyone
    Domain Users
    The Domain Users is the only real group of the 3 listed above.  By that I mean you can add and remove members from this group.  Domain Users is a Global Group in the domain, and it can only contain users that are members of same domain the Domain
    Users group resides in.  By default all users created in the domain are automatically members of this group.  However, the  default Guest account in the domain is NOT a member of Domain Users, instead it is placed in the Domain Guest group.
    Because Domain Users is generally considered the most secure group of the three listed above.
    Authenticated Users
    Authenticated Users was first introduced in Windows NT 4.0 SP3.  This is a built-in group and cannot be modified.  The Authenticated Users group contains users who have authenticated to the domain or a domain that is trusted by the computer domain. 
    Authenticated Users contains all manually created user accounts in all trusted domains regardless of whether they are a member of the Domain Users group or not.  Authenticated Users specifically does not contain the built-in Guest account, but will contain
    other users created and added to Domain Guests.The Authenticated Users group also includes the local computer account (computername$) and the built-in SYSTEM account. 
    Everyone group
    The Everyone group includes all members of the Domain Users, Authenticated Users group as well as the built-in Guest account, and several other Built-in security identifiers like SERVICE, LOCAL_SERVICE, NETWORK_SERVICE, etc.  NULL session connections (aka
    anonymous logon) used to be included in this group but were removed in Windows 2003.  This is a built-in group that cannot be modified.Because the Everyone group contains the Guest account, and several other Built-in security identifiers like SERVICE,
    LOCAL_SERVICE, NETWORK_SERVICE, etc. is generally considered the least secure of the three groups.
    Short Answer is there isn't much to worry about unless folks are logging I with a guest account or you have removed a bunch of folks from the domain users group
    -Ivan

  • Domain Users cannot RDP but Admin group users can

    Hi guys, need your urgent help. I have worked day and night on this issue. Basically the domain users if rdp to the server, it will get disconnected right away after place in domain account with password. However if logged on using console, I am getting
    the below error message:
    You cannot log on because the logon method you are using is not allowed on this computer. Please see your network administrator for more information.
    I have checked few items to remediate the issues:
    1. Done checked - Allow Log on through Remote Desktop Services RDP users group are in.
    2. Domain users are added to local RDP users group.
    3. KB 2667402 installed.
    4. Restarted the RDP service. 
    Please take note this server have RDS installed as well as Citrix client version 7.
    Evan Ting

    Hi Evan,
    Do you have any progress?
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Enable and Disabling the Network Adapter with domain user (Standard User)

    Hi Guys. 
    We setup a active directory in our organization. Added client systems(Windows 7 and Windows 8) to the Domain. Domain users are accessing the system with standard users permission. I don't want to give Administrator permissions. But user should able
    to Disable and Enable network Adapter without giving the administrator permissions. Please suggest . 
    Thanks in advance for the help :)

    Hi,
    According to your description, my understanding is that you want the standard user has the permission to disable/enable network adapter.
    I recommend you to implement this function by group policy:
    User configuration - Administrative Templates – Network - Network connections
    Enable this policy:
    Ability to enable/disable a LAN Connection
    Besides, you may consider of joining users to Network Configuration Operators Group, detailed information you may reference:
    A Description of the Network Configuration Operators Group
    http://support.microsoft.com/en-us/kb/297938
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • Error Individual check for creating the object WBS Element required

    Hi Expert, I've a requirement to create WBS elements using BAPI. And I am using BAPIs in the following manner. CALL FUNCTION 'BAPI_PS_INITIALIZATION' CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI' EXPORTING i_project_definition = g_pdwbs TABLES it_wbs_ele

  • Ways to use the Content option in table sources

    how many ways we can use the (Logical table sources->Content tab). tell me in which situations we use the aggregation levels.are those only with detail tables? anybody explain me more elaborately? Edited by: user12077461 on Dec 31, 2010 6:16 AM

  • Report Server Error REP-1:

    Hi, I am trying to run a oracle report from an oracle form. The very first time when I try to run the report, I get a peculiar error, the report server just says: Error REP-1: . Nothing specific. From the second time onwards its working perfect. Not

  • Could not reserve record (2). Keep trying ?....

    This has to be a classic Oracle forms problem. I would like to replace that useless message by a more user friendly message when a user tries to update a record which is already locked by another user. I found the following solution in here using the

  • How can I queue multiple videos to be exported?

    When I export a video (to .mp4) I've noticed there is a queue button. Does this allow you to edit mutiple videos and queue them up to be exported one after another? If so this would be helpful as I edit about 5 videos at a time and have to manually e