Domino Provision error: No message queue with that name

Hi,
Recently when we try the domino provisioning we often receive this error:
No message queue with that name.
This error is intermittent.
Does any one has any idea why?
Thanks

Hi Wushilin,
We are also encountering the same problem.
Are you still facing the same issue?
If you have solved the problem, can you share the solution?
Thanks!

Similar Messages

  • "404: No group with that name (wikigroupname) hosted on this server"

    I am running 10.6.8 as our wiki server. After rebooting the server, one of the wiki group seems to be not accessible. When try to access the web page it gives error "404: No group with that name (wikigroupname) hosted on this server", though it still exists in /Library/Collaboration/Groups/wikigroupname
    Do you know how to make it viewable again? I tried to create a new wiki "test" and then rsync /Library/Collaboration/Groups/wikigroupname to /Library/Collaboration/Groups/test, yet still can not see the old wiki group.
    Thank you in advance for you help.

    In all due respect Antonio, I believe that Francesc43 is fighting a flakey system. The 404 No Group is a problem that is confirmed by Apple according to others and very prevalent. At this point the only remediation appears to be a complete server rebuild and to avoid going beyond the "default" configuration for web domains.
    I have personally used only the 'any domain' default config, had the server working fairly well. I then added a FQDN and the server started giving 404s for all groups which previously worked and have data in the wiki. At the same time the simple web sites worked with and without the FQDN as expected. Then removing (not disabling) the default web domain config relieved the wiki 404s. Adding a new default domain config back in (via just hitting the "+" and "Save") recreated the 404's for the previously working wikis with no change to the groups. Removing the system created default domain config it alleviated the 404s.
    Adding a system generated default and a 3rd FQDN re-created the issue and then afterwords, removing all but the FQDN that worked could not alleviate the 404s. Regardless of the permutation of turning things on and off, deleting groups, removing webservices settings, putting them back in, restarting the server.. nothing. 404-DOA
    While the mystery seems to be related to a very fragile relationship with DNS on the server, the solution is again to erase the disk and start over. Wikis in 10.5 thus far are neither a robust nor a stable solution from 10.5 thru 10.5.5 in my experience.

  • Wiki - No group with that name hosted on this server?

    I tried to create a wiki for a group of users on my server. Unfortunatly I couldn't get it to work through the external website. Everytime I returns the error "404: No group with that name (team) hosted on this server". But when I went to the internal adres of the server "10.0.3.1" the wiki worked fine, although I selected the FQDN at "Enable the following services for this group on".
    I searched the forums but no solution helpt. I checked the MAC address, restarted teams, restarted webservices, rebooted the server. Because nothing helpt I recreated my opendirectory database. Filled it with all users again but it still doesn't work. However, when I go to server admin and then to "Sites" all my sites are gone, although they do work, I can't edit any of the settings. In Workgroup Manager at "Enable the following services for this group on" I can only select "NONE".
    It looks like Server Admin and Workgroup Manager are out of Sync and Server Admin also lost his previous settings. I tried to import an backup of the webservices, then the new sites appear for a few seconds and then disappear again.
    Any advise?

    It sounds like you have a DNS problem. You have one hostname/IP for the 'world' and another hostname/IP for your internal network. You need to reconcile that before you will get the wiki to work. Start with this in Terminal.app:
    sudo changeip -checkhostname
    Then do:
    sudo hostname

  • I want to move my iphoto libarary but i am getting an error message that says there is already a folder with that name - there is not.

    I want to copy my iphoto library to an external hard drive but when i drag and drop it there i get an error message that says there is already a file with that name - i am not sure what to do next?!  i have tried changing the name of the file - and searching for the same file name in the destination folder - nothing works!  i want to back up this library!  HELP!  This is the ERROR message:  The operation can’t be completed because an item with the name “iPhoto Library to MOVE ” already exists.

    Are you following the instructions here:
    http://support.apple.com/kb/HT1229?viewlocale=en_US

  • Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

    I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
    I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
    So if the file is there why can't spotlight/finder find the file??
    If it helps I get this from the terminal when checking if indexing was enabled.
    $ mdutil -s -a
      Indexing enabled.
    /Volumes/Data:
    2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
      No index.
    /Volumes/Time Machine Backups:
      Indexing and searching disabled.
    /Volumes/Time Machine Backups/Backups.backupdb:
      Indexing enabled.

    Hi Danielle,
    Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
    Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
    I hope this is able to help.
    Anna L
    Applications Engineer
    National Instruments

  • A file with that name you specified already exists.

    I'm using Deamweaver 8.0.1 on a Mac. My server is right next
    to me and is also a Mac. Both Mac's are on OSX10.4.6
    I connect to the server vis AppleTalk local network.
    I guess I'm having a premission problem but whenever I try
    and synchrnize I get an error like this:
    Started: 6/14/06 8:39 AM
    admin.php - error occurred - An error occurred - cannot put
    admin.php. A file with that name you specified already exists.
    File activity incomplete. 1 file(s) or folder(s) were not
    completed.
    Files with errors: 1
    admin.php
    Finished: 6/14/06 8:39 AM
    I can manually copy files without error or insedent...
    I have tried coping the entire site to the server, mannually,
    again. I have deleted the site reference in Dreamweaver, quit and
    then re-launch Dreamweaver and create a new site.

    Update
    I changed over to FTP connection with the host, just incase there was some weird wrong with my server. And FTP works fine from the command line, but Dreamweaver is seems goofed.
    I "tested" the connection from the manage sites menu, its ok. The trouble remains when i upload files. Now, Dreamweaver says "error occured - An FTP error occured -- cannot put [file name] Access Denied. The file mau not exist or there could be a permission problem."
    I have full access to the vsftp.conf file and I've allowed,
    write_enable
    local_mask
    Any thoughs? Its entirely possible there is a simple explanation. I had this working before. Its just not working now.
    Xtian

  • Photos in my from my iPhone have same numbering as photos from my dig camera.  They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name.  Help?

    Photos in my from my iPhone have the same numbering as photos from my digital camera.  They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name.  How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future?  I'm really hoping I don't have to go through and manually rename every single picture.  Thanks.

    How are you backing up the photos?  The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
    You can use a backup application that does incremental backups.  Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro.  The lower cost version, Synk, will do the same job.  Other similar apps can be found at MacUpdate.com.  
    OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name.  I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg.  File renaming apps can also be found at MacUpdate.com.  Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
    OT

  • A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

    A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.  I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name.  I have also deleted the account entirely from my address book.  I have have run repair permissions and also full defrag in iDefrag.  Still the problem persists.  Any suggestions?

    Hello CarolineLongEaton,
    I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
    If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
    https://discussions.apple.com/thread/6116927
    If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
    dofromon

  • The application could not be installed because an application with that name already exists at the s

    The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.

    1.   I am trying to install:  Adobe - Download free trial version
    AdobeAcrobat
    XI Pro <http://www.adobe.com/go/tryacrobatpro/>
    Operating system:  Windows 7
    Current software:  see attachment
    <Removed by Moderator>

  • Message Queue with SP executing xp_cmdshell not working in after DB migration

    We are in a Database Migration Project.
    DatabaseA is set to be migrated. It currently resides in ServerA. In DatabaseA lies an SP, which calls XP_CMDSHELL in it. This SP is being called by a messageQueue.
    In ServerA, we do have a Local Windows System user as the application login. ( ServerA\LocalLogin). This login  does not have any sysadmin privileges and only is a member of db_datareader and a custom executesp roles of the DatabaseA.
    This database Needs to be migrated to ServerB. when migrating this to ServerB, the only change is that the LocalSystem user is replaced by a Domain User. The application is supposed to connect to the DatabaseA via the Domain User. (Domain\DomainUserB)
    However, Once the database is migrated to ServerB, we get the following error related to the message queue:
    The xp_cmdshell proxy account information cannot be retrieved or is invalid. Verify that the '##xp_cmdshell_proxy_account##' credential exists and contains valid information Message Queue Service Broker
    This error never happen to come in ServerA and  is no proxy_accounts are configured in it. The logins (ServerA\LocalLogin and Domain\DomainUserB)  are identical in terms of privileges. What would be the problem ? Why is this error popping only in
    ServerB ? How can i overcome this without creating a proxy account ?
    Security Context of the MessageQueue is  ExecuteAsUser with a principal of dbo.
    Both the servers are SQL Server 2008, and Windows Server 2008.

    Hi Shamil,
    In addition to other post, please make sure the following things.
    1. Check that if the service account that SQL Server is running under has enough
    local security policies rights on the current server.
    2. Make sure the non-sysadmin user has a database user in the master database and GRANT your non-sysadmin user the rights to execute xp_cmdshell. 
    In order to do that, you can run the below scripts:
    USE master;
    GO
    CREATE USER [Domain\user] FOR LOGIN [Domain\user];
    GRANT EXECUTE ON xp_cmdshell TO [Domain\user];
    Reference:
    http://www.databasejournal.com/features/mssql/xpcmdshell-for-non-system-admin-individuals.html
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Can you talk to WebLogic Message Queues with C/C++

              Just curious, can you talk to message queues in WebLogic with C/C++, or do you jave
              to use the JMS API to get to it?
              We have some existing C/C++ code we need to communicate with and we are considering
              using message queues to do it. We have tried it with MQSeries and it works fine,
              but could we do the same thing with WebLogic. We already have WebLogic in production
              and would like to avoid having to also buy MQSeries just to integrate to the C/C++
              code and messaging is a lot easier than dealing with JNI.
              Any advise would be greatly appreciated!!!
              

    Hi Chuck,
              Here are some options:
              www.codemesh.com provides a C++ JMS wrapper (via JNI), one customer has instead
              recommended "Jace" http://sourceforge.net/projects/jace/
              Alternatively use RMI over IIOP to invoke an EJB that in turn calls JMS (WebLogic
              understands IIOP).
              Alternatively use HTTP/WebServices/SOAP.
              Personally, I think RMI/IIOP is an interesting option, post to the rmi-iiop newsgroup.
              Tom
              Chuck wrote:
              > Just curious, can you talk to message queues in WebLogic with C/C++, or do you jave
              > to use the JMS API to get to it?
              >
              > We have some existing C/C++ code we need to communicate with and we are considering
              > using message queues to do it. We have tried it with MQSeries and it works fine,
              > but could we do the same thing with WebLogic. We already have WebLogic in production
              > and would like to avoid having to also buy MQSeries just to integrate to the C/C++
              > code and messaging is a lot easier than dealing with JNI.
              >
              > Any advise would be greatly appreciated!!!
              

  • Error - ipi, message queue operation failed

    we are trying to startup bmq but its finished with error.
    Please could you help us ?
    BEA MessageQ, V5.0 RP8, Wed Mar 29 13:13:49 EST 2000
    Copyright (c) 2000 BEA Systems, Inc. All rights reserved.
    ************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
    gcp, group control process for group 102 is running
    ************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
    qe, queuing engine is running
    ************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
    ipi, message queue operation failed
    ************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
    gcp, initialization failure
    ************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
    qe, caught signal 15
    ************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
    qe, queuing engine is exiting
    ************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
    gcp, group control process for group 102 is exiting

    Could you please provide the init file and the OS information,
    Also, Please enable the DMQIPI_TRACE to get more trace if possible, thanks.
    Regards,
    /Lingtao
    Edited by: Lingtao on Mar 6, 2012 2:51 AM

  • How compatible is Sun ONE Message Queue with IBM Websphere MQ and at what version levels?

     

    Hi,
    Just check the "Troubleshooting Installation Problems section " at http://docs.sun.com/source/816-6453-10/windows.html#34247.
    If you still have problems in installation , you can post your question in the Sun ONE message Queue forum
    at http://softwareforum.sun.com/NASApp/jive/forum.jsp?forum=24

  • I am trying to update the extension manager 6.0.8 i am getting an error u44m1p7  any help with that pls

    i am trying to update the extension manager 6.0,8 i get an error (u44m1p7) any help with this issue please

    That the CS6 version
    Extension Manager 6.0.8 update
    December 10, 2013
    Macintosh | Windows
    Photoshop: Basic Troubleshooting steps to fix most issues
    Troubleshoot Update Errors
    Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
    Explanations of error codes:
    U = Updater.
    44 = Install Update Error
    M1 = Automatic
    M2 = Standalone mode
    P = Patcher
    6 = Done With Errors
    7 = Installation Failed
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Error while restoring database with different name on subscriber

    Hi all,
    I am using merge replication in sql server 2008R2. Yesterday I wanted to create a test environment, so
    I did:
    1. on publisher I restored from backup production db with another name ( lets call it TEST and new files
    .mdf, .ldf and no switch KEEP_REPLICATION). After this step original replication between production
    dbs worked fine.
    2. on subscriber I did the same: restore as new db TEST with new
    files .mdf, .ldf and no switch KEEP_REPLICATION.
    Unfortunately I noticed, that after second step replication stopped. SQL agent replication job on Subscriber
    is gone.
    Why restoring db with new name did affect original replication?
    Finally the most important: replication was set up by external company and I have to bring it to live now
    but I don't know this subject so good. How can I do it?
    Assuming, that there is no data change on subscriber in replicated tables is it enough when I select ‘reinitialize’
    on Publisher and Subscriber?
    Thanks in advance
    Artur

    Hello,
    Sorry for late response, but I was out of the office during last week.
    Regarding problem 1: restoring replication. I contacted guy who made originally our replication and he recreated subscription agent. So this is solved.
    problem 2: why did it happen?
    Lydia, in link which you provided I found only info about restoring db in replication, but I didn't want to restore replication.
    I checked SQL Server and Server Agent logs and there were no entries on that time. The only entries are regarding db restoring. Below:
    09/11/2014 12:45:59,Backup,Unknown,Database was restored: Database: Logik_ATData_TEST<c/> creation date(time): 2012/04/27(13:55:41)<c/> first LSN: 21392:66:267<c/> last LSN: 21392:227:1<c/> number of dump devices: 1<c/> device information: (FILE=1<c/> TYPE=DISK: {'D:\MSSQLBackup\Dzienny\Logik_ATData_PROD\Logik_ATData_PROD_backup_2014_09_10_231001_6391536.bak'}). Informational message. No user action required.
    09/11/2014 12:45:59,Backup,Unknown,Restore is complete on database 'Logik_ATData_TEST'. The database is now available.
    09/11/2014 12:45:59,spid72,Unknown,CHECKDB for database 'Logik_ATData_TEST' finished without errors on 2012-04-26 22:50:05.490 (local time). This is an informational message only; no user action is required.
    09/11/2014 12:44:53,spid72,Unknown,Recovery is writing a checkpoint in database 'Logik_ATData_TEST' (13). This is an informational message only. No user action is required.
    09/11/2014 12:44:53,spid72,Unknown,Starting up database 'Logik_ATData_TEST'.
    09/11/2014 12:44:51,spid72,Unknown,The database 'Logik_ATData_TEST' is marked RESTORING and is in a state that does not allow recovery to be run.
    09/11/2014 12:44:51,spid72,Unknown,Starting up database 'Logik_ATData_TEST'.
    In Windows application log there were also no other entries, besides these above.
    I also could not check job history, because the job was gone in SSMS jobs list, while the subscription was present in SSMS Replication with info, that last successful synchronization was at 12:42 (there is a 5 min. sync period).
     I also don't understand how the job was deleted, because according this manual (http://www.mssqltips.com/sqlservertip/1803/auto-alert-for-sql-agent-jobs-when-they-are-enabled-or-disabled/) I have 2 triggers in sysjobs table and every time, when
    job is deleted/disabled I got @ notification. In this case I got no @.
    My SQL Server version:
    Product_Version Product_Level Edition
    10.50.2550.0 SP1 Standard Edition (64-bit)
    Any idea what happened?
    Thanks,
    Artur

Maybe you are looking for