Don't allow a report to start twice

Hi,
I want to start a report by a job every 10 minutes.
But if the last job has not finished
a: I don't want to start the next job or
b: the new report shout stop his work without doing anything.
Is it possible to check if the rport is started twice?
Thanks, Stefan

HI stephan,
Create a ztable and update this with a flag , since the ABAP memory or SAP memory
will stay till the session is active, and during every run you can check this flag from database in
PBO/AT SELECTION-SCREEN OUTPUT Else exit/STOP etc
You can also MODIFY this DB table to have only 1 record always to avoid unnecessary Memory Usage.
First time just check the flag and Clear this Flag from DB at the end of successful run again set it back with something like X
if you feel ABAP/SAP memory would work for you then you can go with that option aswell.
Hope this would serve your purpose.
You can use TBTCO for this purpose.
" You can use the Field CHECKSTAT which says Job status check indicator for subsequent job start
Cheerz
Ram

Similar Messages

  • I have a macpro quad, suddenly using flash it freeze and pink dots went all over the screen, I tried re-starting it but the same pink dots come at start up and don't allow the computer to start.  What can I do?

    I don't know what to do, I have clean the connections, also started it from disk and made a recovery but still creates the same problem.

    Either your video card has a problem or your monitor has.  This has nothing to do with flash, particularly since your picture is showing the problem at boot time.
    Check your connections.  Try reseating the video card (remove and plug back in).  Make sure dust is blown off of it.  And try a smc reset probably as a last resort.

  • Why does siri starts in the locked screen even if i don't allow it in the restrictions??

    Why does siri starts in the locked screen even if i don't allow it in the restrictions? if a thief got my phone he can hold 3 sec the home button and with siri he can call and do what every he wants..

    Thanks, you're my hero! :-)
    The problem wasn't about the Restricitions because they are really irrelevant. The Problem was that i didn't had this Option to turn Siri off in the Touch ID & Passcode-Menu because i had to activate Siri first.
    Here ist the way to deactivate Siri in the locked Screen:
    [1] Settings > General > Siri > turn Siri on
    [2] Settings > Touch ID & Passcode > ALLOW ACCESS WHEN LOCKED > turn Siri off

  • [solved] systemd service files don't allow quotes

    Why is it not possible to use quotes in
    ExecStart=
    section of systemd service files?
    For example, I can't use service file like this
    [Unit]
    Description=Pacman mirrorlist update
    [Service]
    Type=oneshot
    ExecStart=wget -O /etc/pacman.d/mirrorlist.backup "https://www.archlinux.org/mirrorlist/?country=DE&country=NL&country=PL&protocol=http&ip_version=4" && cp /etc/pacman.d/mirrorlist.backup /etc/pacman.d/mirrorlist && reflector --verbose -l 50 -p http --sort rate --save /etc/pacman.d/mirrorlist
    because systemd will not run it because of presence of quotes:
    Feb 26 08:48:36 nanoBox systemd[1]: [/etc/systemd/system/reflector.service:7] Executable path is not absolute, ignoring: wget -O /etc/pacman.d/mirrorlist.backup "URL=http...
    Feb 26 08:48:36 nanoBox systemd[1]: reflector.service lacks both ExecStart= and ExecStop= setting. Refusing.
    I can remove quotes and then the service will run, but the URL parsed to the command will be cut in half, ie it will stop on the first "&" sign and only DE mirrors will be probed.
    Is there some way around it other than creating a separate executable file and calling it from the service? I don't want to multiply unnecessary files if there's way around it.
    Last edited by Lockheed (2015-02-26 09:37:25)

    Lockheed wrote:
    Raynman wrote:"from command line" is you feeding a (command) string to a shell. Your assumption is that systemd will treat whatever you put in ExecStart exactly the same as your shell would.
    Not "is" but "was". Disappearance of that assumption was precisely the reason of starting this thread.
    I had to read this a few times, but I think you mean it as follows. You assumed you could copy from the shell to the service file and it would work the same way. Then you got an error (about the abolute path) so that assumption "disappeared". So far so good. But you didn't exactly figure out what was different, you formed a new assumption and based your thread on that:
    "systemd service files don't allow quotes" (title)
    "Why is it not possible to use quotes in ExecStart= section of systemd service files"
    "because systemd will not run it because of presence of quotes:"
    Like frank604 says, quotes were never the issue (in fact, they are one of the few things with special meaning for both the shell and systemd), yet you still seem to think they were:
    Lockheed wrote wrote:The actual wrong assumption on my part was that this command would run without quotes as service. It does not.
    It is a shame you only quote the first part of my last reply and ignore the questions in the second part. You did almost the same thing with my reply before that and I suspect you also didn't read the man page I mentioned the first time. You basically give me the impression that you think you have it all figured out (even though you come here looking for help) and my follow-up questions aren't worth your time. That usually makes me "move along" pretty quickly, but I'm trying one last time, because even though "The service now works", I'd like to see that you actually understand why it didn't work before.
    The only thing you really answered was "Changing paths to absolute made no difference.", but that shouldn't be, so when you mentioned empirical evidence, I basically repeated the question asking for some of this evidence (as in exact error messages for one or more modified ExecStart lines).
    When I take your service file and give wget an absolute path, systemd happily executes wget, but then wget complains because it gets "&&" and "cp" and "--save" etc. as arguments. Those errors are what I see in systemctl status/journal, no longer anything about an absolute path. This is because "&&" has no special meaning. You can use semicolons (";") to separate commands instead (explained in the man page section on command lines) or multiple ExecStart lines like frank604 used (which is cleaner IMO).

  • Don't allow adobe to store last opened file

    Hi all,
    We have an portal that shows personal information on a PDF.
    After we have closed the portal, the PDF can still be opened when you look at the last opened files in Adobe.
    Adobe must not save such files in its memory, is this possible? The PDF must only be opened from the portal! and never in Adobe without the portal!
    please help thanks in advance!
    kire, vanderhill

    We use the sap portal with internet explorer.
    Op 30 jan. 2012 om 20:37 heeft "Bernd Alheit" <[email protected]> het volgende geschreven:
    Re: Don't allow adobe to store last opened file
    created by Bernd Alheit in Adobe Reader - View the full discussion
    Adobe is a company. What software did you use?
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4174460#4174460
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4174460#4174460. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why Ipad don t allow to do tethering with blackberry???

    I have an Ipad 2 and I don t want to pay for internet twice.
    I like Apple, I have a Mac and 2 Ipad, but i m very disapointted with the fact that apple block lot of possibilities when android and other s system are more open.
    You can sell an applic that allow to do the tethering, why not?

    More "open" also means more open to malware and spyware.
    http://macdailynews.com/2011/08/24/apples-ios-unaffected-by-malware-as-android-e xploits-surge-76/
    I believe connecting an iPad to an iPhone with a tethering plan is supported and the same for Verizon's mifi service. There are no free rides with this.

  • Accidentally clicked 'don't allow access to my videos'

    Accidentally clicked 'don't allow access to my videos' when I fist started the software.  Subsequently can't access any of the videos or photos on my iPad and can't find any way to change this in the settings. Have tried deleting and re downloading the software but its hasn't prompted me with the question again.
    Thanks in advance for any help

    Settings-privacy-videos- turn on access for the desired app.

  • Don't allow to press "Enter" in JEditorPane

    Hi,
    I need not to allow to press "Enter" key in JEditorPane. I added keylistener to JEditorPane.How to implement this?
    public void keyPressed(KeyEvent e){
    int code = e.getKeyCode();
    if(KeyEvent.getKeyText(code).equals("Enter")){
    //Don't allow to press
    Please provide me a suggestion.
    Regards
    Senthil

    I am only providing an alternative answer but perhaps could have been a little clearer with my reply.
    ***For the benefit of those who don't know***
    e.consume() will consume that keystroke and thereby also accomplish what he asked.
    A Document filter would be a better implementation if he wants to block the newline but Senthil was also not clear as to weather he wanted to block the keystroke or the newline.
    @db A simple "Welcome to the forums, but ......." may also have been a better answer from you.
    I am not trying to start a flame war, just would like to become part of the community and provide some assistance where I can.

  • Is CA allowed to report like this? - Update

    CA says we owe a $583 bill plus around $90 interest. They are sueing us for a total of $1032. I don't remember the exact date we were served, but we had until the 12th (tomorrow) to answer (we answered last Tuesday the 2nd), but when I go look at the collections account on Credit Karma it's now reporting that we owe the $1032... no judgement has been entered yet. I've checked my district court's small claims index to see what was going on, it was updated on the 10th and I don't even see the claim on there yet. Are they allowed to report that we owe them that total?

    vca wrote:
    Update!I finally got a hold of L&I, they told me that they are reviewing the one bill I had pulled from a CA, and that if we had another bill we believed was connected to the claim that we needed to contact the doctor and have them bill the department directly. That was a little frustrating to read, because A no one ever called me back, it took a secured message to get a reasponse, and B I already asked the doctor to do this and they said it was too late to bill L&I, which was a lie, and they haven't been helpful at all in this. But armed with an actual communication from the deaprtment I called the doctor for the third time, and a new gal answered, she was so nice! She got all the claim info and said she'd send it off to L&I and that she'd notify the CA that the account is on hold until they receive payment from L&I. She said at this time it will all still be reporting on credit reports, I assured her that that was fine, I just wanted to get the bill sent to the right person. The CA is still reporting that we owe the prayed for amount even though when I check my courts website there hasn't been any update to the status of the suit, but oh well. If we have to go to court we have our defense. Now I just need to send a PFD letter to Transworld SystemsOnce its paid and settled I would file a motion in the court to dismiss the lawsuit, there would no longer be a basis for such a suit.

  • I was just prompted (out of no where) that "CoreServicesUiAgent" would like to access your calendar. Don't Allow. Allow. - What's that for? Why did it show up and do I allow or not? I've googled this extensively and no one knows what it is. Thanks.

    This promt seems to relate to iCal - it is requesting access to my "calendar" but the icon shows the iCal icon infront of some icon of a house with a dial - maybe it is supposed to look like a safe dial protecting my house.
    There is a ? that launches the Help Centre. There is says the prompt is because something is tying to access the calendar and I need to give permission but I'm not running anything that would have needed access.
    Is it possible that one of the websites I was on prompted it? I didn't download anything - but I'm working in SmartSheet, which uses a calendar tool to track projects. Any chance that's trying to communicate with iCal in the background?
    But I can't see anywhere online where people know what the CoreServicesUIAgent is, and there's no more info about what/who I'd be giving access to my calendar.
    Help?
    Thanks,
    k

    Thanks, I'd done that before coming to Apple and didn't receive any additional information about whether it's safe to choose "Don't Allow" or "OK". I don't know what I'm in for if I choose either one. Can't afford to lose that calendar. I depend on it too much.

  • Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

    Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
    I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
    This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
    I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
    All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am  still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
    God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
    See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

    Problem here is you admit you cannot afford the service.
    And you want to blame Verizon for losing a job because you have no cell phone.
    If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
    No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
    Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
    Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
    Good Luck

  • Report server start error

    Hi,
    After I installed my Devsuit10g report server was starting fine without any problem by using this command 'rwserver server=servername'
    Then I have installed oracle 10g on the same machine, after that report sever start gives this error message as 'The procedure entry psoasys could not be located in the orapls10.dll'.
    I can see this .dll in both oracle devsuithome/BIN and oracleDB home/BIN.
    Now how to start the report server. I have no Oracle AS installed in this machine.
    Has anybody encountered this problem? any solution?
    Rgds

    Maybe this could help:
    set ORACLE_HOME=devsuitehome
    set PATH=devsuitehome/BIN;%PATH%
    rwserver server=servernamecheers

  • My daughter is 7 and I don't allow her to download anything on her iPod touch. I have to put in my password for anything to be downloaded. Recently when putting in my password, I am being ask to enter in an additional email address for verification purpos

    My daughter is 7 and I don't allow her to download anything on her iPod touch. I have to put in my password for anything to be downloaded. Recently when putting in my password, I am being ask to enter in an additional email address for verification purposes.  I need to know why this is.  I have 1 email address that I use and don't see a reason to create a additional email address.
    Can somebody tell me if this is normal?
    Thanks
    Steve

    For security and fraud prevention,  Apple has ramped-up the security requirements for purchases.
    Apple ratchets up App Store security | Apple - CNET News

  • I am looking for a way or a PDF annotator app to use in a tablet that don't allow deletion as I edit.

    Hi All, I am looking for a way or a PDF annotator app to use in a tablet that don't allow deletion as I edit. I need to use in a controlled process that don't allow user to delete or erase edits once a mistake is made or a rewrite is needed. Thank you

    See How to call Adobe Acrobat 9 APIs to OCR the PDFs through .NET reply 4.

  • How do i allow my photo (sunflower photo app) to save pics from the facebook app, it came up allow don't allow and i clicked don't allow by accident.  How do i now get it to come back to click allow??

    how do i allow my photo (sunflower photo app) to save pics from the facebook app, it came up allow don't allow and i clicked don't allow by accident.  How do i know do allow...already deleted fb app and re installed that didnt work?? How do i now get it to come back to click allow??
    Thanks x

    I have the same problem but in reverse. I clicked on don't allow in FaceBook when I was asked to allow it to access my photos and videos. I have been into the privacy settings as suggested by FaceBook and there is no link.

Maybe you are looking for

  • How to find out the stop words of an index?

    I am sure it's something very easy but: I want to find out the stop words that i am using in a particular index via SQL query? I had several indexes with diferent stoplists. Thanks

  • "Loading..." and lost Draft messages

    I was used to have a few hundreds messages in my Draft mailbox(es). The problem concerns my two Gmail accounts. In the Mail accounts setup, the "mailbox behaviors" where configurated as NOT "store draft messages on the server" = Draft message were st

  • "Partner function CA can only occur 1 times in procedure TA (Sales Document

    Dear Experts, I have a requirement where I need to capture the Partner function more than once.... Say  i need to capture the two or more commission agents in one sales order.... But when I enter the second comm agent the system triggers "Partner fun

  • Convert BAPI Return to Faults?

    Hi, For the development of Web Services, the use of Fault messages is preferred to report errors.  Proxies (Java and ABAP) can return Fault messages, that in turn can be returned through the Web Services. However, BAPI's are not able to return Fault

  • Help needed with String formatting

    Hi there, I have this string /C:/Documents%20and%20Settings/sickboy/workspace/Take%20A%20Note/bin/deployment/TOC.htmlI managed to get the last field with this file = ViewClass.getEditorPane().getPage().toString().substring(ViewClass.