Don't buy U330! Wifi 'Local Only' Issue can't connect to internet anywhere!

If you are familiar with the local only problem, like I have become in recent weeks, you know the frustration of not being able to connect to the internet with your brand new computer when your ten year old laptop can surf the web with no problem.
Normally the 'local only' problem is restricted to Vista for its newer network configuration under ivp6, but after five weeks of attempt to solve the problem, I have concluded that the lenovo U330 and its components are to blame.
I hope someone here can help me stop advocating ban on purchasing U330 by helping me solve this problem.
Here is a list of things I have done so far....
Clean install vista
turn off ivp6 in all network components
go to regedit and set ....world = 0
Fix all DHCH word32 key to 0
uninstal ibm wifi connecting software
update the wifi driver from intel/lenovo
Still unsolved, I  installed windows XP and repeat step 2 - 6
Still unsolved, I installed Windows Vista 64 repeat step 4,5,6
There are few more procedures I went through to fix this problem. I have spent literally weeks trying to solve this problem.
Lenovo sold me a laptop that does not connect to following locations: Local library, school network, local church.
I understand this may be a Intel driver issue more than the lenovo laptop issue, but I don't care. I just want my internet to work.
I will appreciate it if someone can come up with a solution to my problem.  And please don't tell me to contact the computer administrator of my school/library/church/local library to upgrade their hub because my Lenovo is far too advanced for their network.

I am an engineering student and I have enough knowledge in computer hardware and software to know where left is from right.
My school network engineer spent over an hour to find a solution to this issue to no avail.
Therefore, if any potential customer whos knowledge in computers is below the network engineer's level should do themselves a favor and avoid purchasing U330 laptop.
I know it sound absurd, but this is the truth, and I really hope I can apologize to anyone I may offend when my problem gets solved.

Similar Messages

  • Wifi is unstable and can't connect to internet

    please help.other devices can connect easily but just recently this happens,others are normal and the same.the same number of users and good signal strength

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT5304 Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet  with cable or wifi ! can see network and router,. Help

    Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet  with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !  

    recently had update
    Care to share which update?
    Have tried many things
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

    If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • I do not have a home wifi setup. How can I connect my iMac to apple TV?

    I do not have a home wifi setup. How can I connect my iMac to apple TV?

    you need a wifi connection, it says on this manual
    http://manuals.info.apple.com/MANUALS/1000/MA1607/en_US/apple_tv_3rd_gen_setup.p df

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • After i update my ipad 2(wifi 3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    after i update my ipad 2(wifi+3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

  • If I'm connected in wifi with my Macbook, can I share the internet with Iphone? Thanks

    If I'm connected in wifi with my Macbook, can I share the internet with Iphone? Thanks

    If you are asking about the Internet Sharing feature on the Mac, the answer would be that this option is not available for normal wireless, but it might work for BlueTooth.  Might be worth a try that way.
    However, if the Mac had an Ethernet Internet connection, then you could create your own "private" wireless network to allow wireless devices to connect.

  • Wifi handoff issue and "not connected to internet"

    I have a house with a wireless router and a boathouse with a wireless repeater. DHCP from main router. When connected to "main", i can connect to internet to browse, mail etc. When I walk down to the pier, the stronger signal from the boathouse is not picked up, so I have to manually switch to the boathouse signal. Then when I try to browse, I get a pop up that says that safari is not connected to internet. Even though the wifi symbol is displayed, and in settings it indicates that I have switched to the new ssid. This never happened with my 3gs. Very annoying. Anyone experiencing this problem when they are in the proximity to 2 wifi signals?

    Sofar I have found (off internet),
    A)that if you go into sleep mode, the wifi shuts down or powers down.
    B)sleep mode must be disabled in order for wifi to continue.
    C)you can check this by going into wifi and seeing the iphone every 20 seconds or so looking.
    D)as far as handoff ,I still not to sure but I think BOOTH units must overlap each other in order to handoff from 1 to the other.
    Show much bs on the web that I have to filter the pages and there not enough time in the day to go thru it all.

  • Can't connect to internet on WiFi network

    I have a cable modem hooked to a wired router (Linksys) hooked to a wired/wireless router (DLink). My Windows laptops and PSP can connect to my WiFi network just fine, and up until about 2 days ago, my iMac could too. But now, it recognizes the network and I can connect to my other computers, but I cannot connect to the internet. When I used the diagnostics from OSX, sometimes they would say the internet was working (though it definitely wasn't) and sometimes it would say it wasn't. My signal strength is fine and I haven't changed any network settings on the computer or to the network itself. I think I just installed some updates from Apple, but I'm not sure. Please advise.

    I had the same problem on my G4 tower a few weeks ago. Drove me nuts! I finally got past it by accident. I had created a Home location in the Network preference panel. That one wasn't working. Could see the local network, but couldn't hit the internet to save my life. By accident, I switched back to the Automatic location that comes as a default. That one worked! Haven't had a problem since.
    I think the issue might be preference corruption of some kind. I'm not sure.
    Anywho, try creating or using a different location on your Mac and see if a fresh set of setting will get you through to the internet.
    Doc

  • My MBP wouldn't start this morning, it was just stuck on white screen with grey logo and fan running.  I replaced my magsafe power cord and resolved starting issue.  Now I can't connect to internet and iTunes won't load???  Help?

    This morning I was just getting the white screen with logo and status bar with fan running.  I thought it was an issue with the power adapter so I went out and replaced it.  MBP will start now, but won't connect to internet.  I have full wi-fi signal.  Also, when I try to launch iTunes, it just quits right away.  Please help? 
    -A

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I have a wifi signal on my iPad 2 but it can't connect to internet

    iPad 2 has wifi signal, but unable to connect to internet. I am also going through an AirPortExtreme.

    I've done that several times. Still no connection. Also all of the menu items are greyed out while in Airport utility. I've reloaded it and still can't seem to get BaseStation. 2 Days ago Comcast went down. When it came back on, I wasn't able to use the iPad.Comcast reset the signal several times.This is   a brand new airport, but I exchanged it being as I was not able to connect or even get a signal.  At least right now the iPad has a signal ,after much hit or miss actions on my part.I feel like I'm chasing my tail. Very frustrating.Any help would be appreciated. You can probably hear me screaming at my computer at this point. I also did a search on the iMac,also brand new, to locate BaseStation...nothing. That's after using the cd that came w/ the AirPort.

  • Can't connect to internet unless on Wifi...

    K, so I'm trying to figure out why I can't connect to the internet unless I'm using wifi...
    My mobile nework just doesn't work.  I have the unlimited email and web plan.
    One of my coworkers has the same phone, same plan as I do, and she can access the web anywhere, so I don't think it's location.
    Ugh, so frustrating...

    Hi retta666,
    Data connection
    Settings for connecting to the Verizon data network are already preconfigured on your
    device, and your device is ready to connect to the Internet.
    Turning the data connection on or off
    Turning your data connection off can help optimize your battery life. It can also save money
    on data charges. However, when your data connection is turned off, you may not always
    receive automatic updates to your email, social network accounts, and other synchronized
    information.
    Press HOME > MENU and then tap Settings > Wireless & networks.
    Select the Mobile network check box to turn on the data connection; clear the check box
    to turn off the data connection.
    Enabling data
    Data connection settings for connecting to the Verizon data network are already preconfigured on your device. Try turning the data connection on or off. Turning your data connection off can help optimize your battery life. However, when your data connection is turned off, you may not always receive automatic updates to your email, social network accounts, and other synchronized information. By trying to make the adjustment, it can refresh the setting to allow you internet access. 
    The steps are by Pressing HOME, MENU and then tap Settings, Wireless & networks. Then select the Mobile network, check box to turn on the data connection  or clear the check box to turn off the data connection. 
    Thanks,
    edw@vzwsupport

  • Nokia N8 Can't connect to internet via WIFI

    HI!
    I have some problems to connect to internet via wi fi! I can connect to my wifi adaptor on my pc(hot spot)  with no issues but it wont be able connect to the internet I checked this issue whit a sony ericrson xperia x8 and theres not any problem but my N8 cant connected to internet.
    Solved!
    Go to Solution.

    alucard3 wrote:
    Resolved by unofficial but efficiently hotfix.
    http://www.n8fanclub.com/2012/12/wlan-connectivity​-software-update-for.html
    Hi am having the same problem but the link above does not work?
    Thanks
    ledders

  • HT4623 How come I can not use WIFI to update the new IOS in my iPhone 5 ? the screen pop up " you no longer connection to Internet " . And I won't be able to download any Apps using Wifi, the screen popup " can not connect to iTunes stores " ..

    I can not use Wifi at home to download Apps . The screen pop up " can not connect to iTunes Store " ?? I am using iPhone 5 . I used to be able to download any Apps before .
    I can not even download the new IOS which Apples sent to my phone to update . ???? Please help !!!
    My husband is using IPhone 5 and his phone is fine , he can use WIFI to download any apps or update any software from apple . Does that mean my phone have problem , not my WIFI right ???
    Now, I have to use my data plan to download any Apps which waste my money :( Thanks a lot !!

    Hello phonphon,
    We've got an article that can help restore your phone's connection to the iTunes Store while on your WiFi network.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

Maybe you are looking for

  • For SharePoint 2013 App, how to request permission to host web for only 2 lists?

    I find app permission requests are not granular enough. I see that there can be permission properties (key/value). Is there any way to request permission to more than one list. It's not comforting for a site admin to grant an app permission to ALL li

  • I want to export a group of photos from iphoto.

    I want to export a group of photos from iphoto. I want them to stay in the same order that I put them in. So far when I export, the photos sort according to date or name. I want them to stay in manual sort the way I set them up in the album. I also w

  • ISE and NAC Agent

    Hello, we currently run NAC for our wired (OOB), wireless (IB) and VPN (IB) enviroments. We are looking at migrating over to ISE for our wireless enviroment as a first step, with follow-up projects to move the VPN and wired clients over. I have been

  • Invoice Matching - Best Business Practice

    As far as I know matching invoices to PO or to a receipt is done in AP. A colleague of mine is stating that matching should always be done at the purchasing level and that she has never seen it done in Payables. Other than the user's guide, would any

  • Dynamically change data type of a field

    Hello, I'm trying to dynamically create a SQL statement which will insert record sin to my SQL data base. I dynamically bring field name sand values. then concatenate them in a string and then Execute the SQL string in a native SQL eXEC statement. It