Don't display attribute in a query

Hi!
I have an InfoObject with attribute.
When I execute query on InfoCube instead of attribute display '#'.
but there are filled fields for attribute in InfoCube.
What can I do?

Hi,
Activate you master data, by executing the Atribute change run. RSA1.
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b4/730276938a504cacc56b44fd3578e3/frameset.htm.
Hope this helps,
With Regards,
PCR

Similar Messages

How to display attributes in the query

Hi frnds,
I want to show the attributes of material ( mat group , mat type ), vendor ( Sort field ) in the report.
We loaded master data for material and vendor.
I dragged the char and the relevant attributes in the query designer and executed the query. But in the output the attributes values are not displayed.
What could the reason ?
Regards,
V N.

Hi all,
Thanks for the reply.
"Display attributes will also get displayed if you include the infoobject for which they are attributes."
Suppose for 0vendor the attr is 0sortl. By defualt it is display attr. I dragged in the query the 0vendor and its attr 0sortl and executed. It didnot displayed any values for this 0sortl
I changed it to Nav Attr. And rerun the query, it is displaying values.
In the first case i included Display attr and the infoobject for which it is attr in the query. Please explain me why it didnot displayed the values.
And after changing it to Nav attr it displayed the values.
Please explain me what happened actually.
Regards,
V N.

Problem extracting, query with display attributes, in RSCRM_BAPI.

Has anybody experienced that problem?
When I execute the extract, the job cancels itself after 2 minutes. Sometimes even shuts down the DEV server.
There is no Dump in ST22.
The only error I get is:
TRUNCATE TABLE "/BIC/0CZTEST" where ZTEST is the extractor
But when I execute the extract with the same query without the display attributes it runs just fine.
Help please...

Check Table("/BIC/0CZTEST") using T-code "SE14".
If necessary, drop and creat, again.
Good luck.

APD query key date with variable for time dependent MD display attributes

Hello,
In a APD I use a query as a source with a query key date that is filled with a customer exit variable.
When I run the query as a user, the time dependent MD display attributes look fine. However, when I use the query in an APD, I get no values for the time dependent display attributes.
Any suggestions?
Thanks

Hi,
Try to run query using RSCRM_BAPI Tcode, this you can also schedule in background
Thanks
Reddy

Show Display Attributes for LOV in af:query

ADF 11g (11.1.1.3.0)
Hi all,
I'm using an af:query that uses an LOV for a PERSON_ID column, with an EMPLOYEE view as the View Accessor.
Since the user experience may require the user to search for a particular employee, using either a "Combo Box with List of Values" or an "Input Text with List of Values" makes most sense, but those UI controls only display a the PERSON_ID when returning from the search pop-up. This is in contrast to using a Choice List, which would show, in addition to the original column (PERSON_ID), the selected Display Attributes (eg PersonID, FirstName, LastName).
It is possible to show the additional Display Attributes when using the "Combo Box with List of Values" or "Input Text with List of Values" controls for an af:query, and if so, how?
Thanks!

Hi user,
Take your base VO and create a transient attribute or an attribute derived from a reference entity as the display value (let's say "PerFirstName"). Then, create the list of values of employees on this attribute and set the return values "FirstName" > "PerFirstName" and "EmployeeId" > "PersonId". Define a view criteria to be used for your af:query component and add "PerFirstName" with '=' operator (this will render as a LOV).
Let me know if it helps...
Barbara

High Resolution Photos Don't Display

Hello,
We have a fully patched Lync 2013 installation with a fully patched Exchange 2013 installation. We've moved all users to the Unified Contact Store, and have had all users upload high-res photos. I can test this via the URL like this:
https://server/ews/Exchange.asmx/s/GetUserPhoto?email=[email protected]&size=HR648x648
I can definitely see high-res photos. Unfortunately, Lync doesn't display them! We get the old, low res AD photos that are horrible. I have read through everything I can find to ensure high-res photos are enabled in Lync, but they just don't display.
Any ideas on how to fix / troubleshoot this?
Thanks!
Nolan

Hi, depends what constitutes everything you could find =)
Can you confirm that the 'DisplayPhoto' attribute of your associated client policy is set to allow ALL photo's, and not just those from AD.
Use the below from Lync Management shell to query the attribute status against your client policies.
Get-CsClientPolicy | Select Identity, DisplayPhoto
Kind regards
Ben
Blog:www.gecko-studio.co.uk/
Twitter:
LinkedIn:
Facebook:
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
or queries.

Keyfigure display attribute not visible in the report

Hi,
I am facing a problem. I have keyfigures as display attributes in my master infoobject. Earlier I was able to see those display keyfigure attributes in my query and was able to use them in it. After that, few changes were done to the master infoobject (addition of few attributes and deletion of few - but none of them were what I was using). Now after the change, when I open the query in design mode, it gives me error saying that it can't access those attributes (only keyfigure display attributes) and repairs the query (removes those attributes). All the other attributes are visible.
I have already tried rsrv for the master infoobject (corrected the error) and rsrt for the query. After that also it doesn't solve the problem.
What could be the reason? Any pointers would be highly appreciated.
Thanks,
Saket

Hi,
Display keyfigure attributes are visible in the reports because I was using and running them in the reports before the change in that particular master infoobject. Only, keyfigures maintained as attributes can't be made navigational (hence can't be used for drilldown). Its only after the change, there is this error.
I had also checked the authorization for Keyfigure earlier, which I have. Therefore its not the problem.
Thanks for the help anyways! Any more pointers? Btw, I am working on BW3.5.
Thanks,
Saket

Display attributes tab in BEx Web

Hi,
I don't see display attributes tab after clicking context menu -> properties -> Characteristics(for perticular Char). I can see only one tab.
There should be three tabs according to help.sap.com...
http://help.sap.com/saphelp_nw04s/helpdata/en/d3/ea523ac1ea1d35e10000000a11402f/frameset.htm
Iam a frontend(portal) consultant and i don't have any exp with query design or data modelling.. I don't see any option to display these tabs..is there any property i can set in WAD.
according to help.sap.com..."Attributes tab page appears only when the characteristic has one or more attributes"...where to add attributes to characteristic.
is there any SAP standard query working with similar functionality? Plese suggest or forward documentation links.
Thanks,
Krishna.

Hi,
We can see the tab and add the attributes to display in Bex analyzer but attributes tab in not visible on Bex(context menu -> properties -> Char) .We are running on NW04s SPS10.
Thanks,
Krishna.

Error-Cannot set DISPLAYED attribute of the current item DUMMY.VIEW

HI ALL,
Im my form, I have three BLOCKS
1) CTL(Manual Data Block)
2) DUMMY(Manual Data Block)
ITEMS 1) msg 2) <view> 3) <cancel> 4) <Exit>
3) Audit Trial Log(Database Data Block)
ITEMS All Database columns of a table Audit_Trial_Log
CANVASES 1) CANVAS3------Block CTL---window1
2) New_Entries---Blocks Dummy and Audit Trial Log--New_Entries
In CTL block I have button <VIEW>. On when-Button-Pressed trigger I am setting "VISIBLE' properties false for items of datablock AUDIT Trail LOG and also for item of datablock DUMMY excluding for <VIEW> and <Cancel> buttons.
when-Button-Pressed trigger of <View>, I have done reverse setting i.e. previously visible items to invisible and vice versa. Also I am executing query on Audit Trial Log block. But when I click <VIEW> I get the following error
FRM-41016: Cannot set DISPLAYED attribute of the current item DUMMY.VIEW Even execute query fails.
Please help me......

before setting a current item to invisible you must navigate to another item, which is visible

Search for display attributes in Web reporting

Hello,
When I execute a query in Excel, in the variable entry screen, I can search values for material, for example, using some display attributes as Colour or Size. I mean, I want to execute the report for materials whose colour is white. I can open the matchcode for Material, I select the value "white" for the Colour display attribute, and I get a list of all the materials with that colour. The report is executed for those materials.
However, when I execute the same report using Web reporting, I don't have the display attributes in the selection screen, to restrict the material. Once the report is executed, in the Navigational block, if I filter the material, there is an option called "Search for display attributes activated", where I can restrict per Colour, but only for one value.
I have two questions related to this topic:
1) Is it possible to have the functionality "Search for display attributes activated" in the variable entry screen, for Web reports, in the same way it is available in the reporting via Excel?
2) Is it possible to configure that functionality, in order to restrict several values for the display attribute at the same time (in my example, for Colours "white", "black" and "red" at the same time)?
Thanks very much for your help
Patricia

Hi Patricia,
Looks like you have some new navigational attribute requirements, don't you think? I'm sure that would solve your issue, though maybe you're trying to avoid using navigational attributes (it is usually said that using navigational attributes is slower).
Maybe you can do a test on BEx to check if your query is considerably slower when filtering directly by material code (by filtering on the selection screen using display attributes) or using a navigational attribute.
Match codes on web reporting have lost some functionalities compared to BEx (such as importing a list of values from a file, for instance).
Regards,
David.

Display attributes from "global" and other entities in a single screen

As far as I know, in OPM attributes of only one type of entity can be added to any given screen.
As per of functional requirements of my current project Ihave to display attributes from more than one type of entity in some of the screens.
I found a workaround for entities which has only one instance (singleton entity in version 10.1), but couldn’t figure out how to display attributes of entities which has multiple instances.
For example:
We have an entity called “the child” which has many attributes. There can be more than one child instances defined in a given assessment session.
This particular screen should have attributes which belong to the "global" and "the child" instances.
(The names of all the children should be displayed on the screen as check boxes so the user can select the children who are affected by the global attributes displayed on the screen.)
Is this achievble in OPM 10.1?
SP1D3R MAN

Displaying Global attributes and nested entity level attributes on the same question screen cannot be done in OPM 10.1 with out-of-the-box functionality. It would have to be a custom screen. (FYI, I'm not a programmer so I can't advise on how to build such a custom screen.)
Before building customisations, you should also consider whether you really need to use an old version of the product. OPA 10.1 was released early last year; the current version is 10.3.

Display results of MySQL query from AMFPHP by ArrayCollection in AS3 (Flash CS4)

Hi, i am using Flash CS4 (AS3) + AMFPHP + MySQL to do own flash frontend for Wordpress CMS. Everything is going fine but i`ve got one problem. Problem with properly display of result of query in AS3 by using ArrayCollection.
When i check my service in "amfphp/browser/" in web browser i`ve got this (with all needed data):
(mx.collections::ArrayCollection)#0
filterFunction = (null)
length = 2
list = (mx.collections::ArrayList)#1
length = 2 source = (Array)#2
That is the reason that i suppose that service work fine. Problem is when i try to display result in AS3. In actionscript i have got this:
function getNewsListHandler(result:Object):void{
trace(result);
This function displays: [object Object].
I know that "result" is an ArrayCollection type but i don`t know how to get rows and columns from this. I know that my data is there but i have no idea how to get it.
Clarify: I don`t know how to get to Arrays and simple data variables which are in ArrayCollection.
Could anyone help me with that problem. I would be gratefull
P.S. I tried also change query type in service.PHP for mysql_fetch_query but in that case i`ve got only one row (not all data).

Thanks for fast reply,
arr_coll:ArrayCollection = new ArrayCollection ({col1:"data1",col2:"data2"}, {col1:"data3",col2:"data4"});
you would get the data like
var resultstr:String = arr_coll[1][1].col2;
trace(resultstr);
//results in data4
could you explain me how it was happen (arr_coll[1][1].col2)? It`s not clear to me. I thought in this case rather something like this :
var resultstr:String = arr_coll[1]['col2'];
It should give me "data4". I know it wasn`t but i don`t understand ArrayCollection in level which is needed to use your advice in my case. Could you clarify "arr_coll[1][1].col2" a bit?
What would it look like when you would have something like this:
arr_coll:ArrayCollection = new ArrayCollection ({col1:"data1",col2:"data2"}, {col1:"data3",col2:"data4"},{col1:"data5",col2:"data6"},{col1:"data7",col2:"data8"});
and you would want know f.e. position in ArrayCollection of "data6". How would you code this? arr_coll[1][2].col2?

How to display result of database query in JFrame?

How to display result of oracle database query in JFrame?
This is part of my code:
String username, password;
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
OracleConnection conn = DriverManager.getConnection(String url, String username, String password);
Statement s= conn.createStatement();
ResultSet q= s.executeQuery("SELECT A, B, C FROM TABLE X");
Forget what url, username & password are. Is there any problem with my code?
What should be next if I want to display result of the query in a table in JFrame?Thx !

How to create JTable with unknown no. of rows? How to get no. of rows of a query?
I saw the demo of creating JTable on java.sun.com but the the table has a certain no. of rows which is not applicable to my case.
Suppose the result of query is a table with 3 attributes so there are 3 columns in the table.
R contains the result of the query.
Should it be something like this if I want to create JTable of the query?
How to make n rows of {R.getString(1),R.getString(2),R.getString(3)};?
public SimpleTableDemo() {
super(new GridLayout(1,0));
String[] columnNames = {"A",
"B",
"C",
while (R.next())
// content of a row
Object[][] data = {R.getString(1),R.getString(2),R.getString(3)};
I can't run it because I still can't debug my code which is said before.
Thx!

Select the same attribute in a query more than once

Hi Experts,
My requirement is to select the same attribute in a query more than once.
How can I acheive this?
Expecting an early solution..
Pilliga

Hi,
Create a calculated attribute that just displays the "same attribute".
(Note: you will need to uniquely name this object).
For example, if you wish to display Emp Name twice in the same query, then create a calculated attribute called Emp Name2 and select it and Emp Name in your query and the same info will be displayed twice in your results set.
Cheers,
Tanish

ADF BC : "Attributes selected in query with no column type found! ..."

hi
Using JDeveloper 10.1.3.3.0, I have this "Selected in Query" attribute, "Never" updatable, in my Entity Object.
The Entity Object is based on the SCOTT.EMP table and the attribute, called "BonusInfo", is defined using the expression " '[bonus info ' || (SAL * 2) || ']' ".
see http://verveja.footsteps.be/~verveja/files/oracle/NoColumnTypeFoundApp-v0.01.zip
While creating this Entity Object, I got a "Business Components" dialog that says:
"Column type is not specified for this attribute. Specifying column-type and precision results in better query performance at runtime. Do you wish to set column type to VARCHAR2(255)?"
I clicked "Yes".
I also created two View Objects based on this Entity Object.
In the "Create View Object" wizard "Step 4 of 7: Attribute Settings" I got a "Business Components" diaglog that says:
"Attributes selected in query with no column type found! Specifying column-type and precision results in better query performance at runtime. Do you wish to set default column type for these attributes?"
I clicked "Yes".
Testing the query in "Step 5 of 7: SQL Statement" showed "Query is valid.".
question:
Why do I keep getting the message ...
"Attributes selected in query with no column type found! Specifying column-type and precision results in better query performance at runtime. Do you wish to set default column type for these attributes?"
... in the View Object Editor if I click on different attributes?
(I don't get such a message the first time I click on an attribute after opening the View Object Editor, but after that it keeps popping up each time I click on a different attribute, no matter what I answer "Yes", "No" or "Cancel".)
many thanks
Jan Vervecken

Jan,
BC needs the column type and precision so that we can allocate the correct JDBC buffer size; otherwise we would just allocate 2k per string.
Blaise

Don't display attribute in a query

Similar Messages

Maybe you are looking for