Don't execute a step in the Operator

Hi,
I'm using a IKM file to Oracle(SQLDLLR) and IKM SQL control Apend, it's an obligation.
In the operator there is a step called delete previous error which take a lot of time , you can watch a movie and the step still running.
Can someone provide me with a solution to use does KM and use Flow Control and don't pass through this step.
Thanks

On the Flow tab, where you select the IKM, did you try setting FLOW_CONTROL = No. That should bypass the error checking part and hence the step you mentioned.
The step that you mentioned belongs to the CKM.

Similar Messages

  • Ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either.  Any suggestions?

    ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either.  Any suggestions?

    Does it light up at all? If not, you could have a battery issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • HT1414 I just tried to reset my iPad...then couldn't reset it.  I don't know how to install the operating system on it again

    I just tried to reset my iPad...then couldn't reset it.  I don't know how to install the operating system on it again

    Is this how you reset?
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.

    While deploying sharepoint hosted app i am getting error "Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact
    your administrator.". From the developer site i remove the app manually and after deploying i am getting the same error again.
    Harminder singh

    I was trying to install SharePoint 2013 on premise development environment and encountered the following issues while deploying the app using Visual studio 2013.
    Please refer these articles for configuration settings.
    http://blogs.msdn.com/b/how24/archive/2013/06/14/prepare-your-sharepoint-2013-farm-for-app-development-and-debugging.aspx
    http://www.codeproject.com/Articles/515677/MyplusFirstplusSharepoint-HostedplusAppplusinplus2
    http://blogs.technet.com/b/mspfe/archive/2013/01/31/configuring-sharepoint-on-premise-deployments-for-apps.aspx
    http://aanuwizard.com/2012/12/07/article-14-from-30-system-account-can-not-deploy-or-purchase-an-app-in-sharepoint-2013-rtm/
    Error 1:
    Error occurred in deployment step 'Install app for SharePoint': The System Account cannot perform this action.
    Error 2:
    The local SharePoint server is not available. Check that the server is running and connected to the SharePoint farm.
    Error 3:
    Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
    Solution:
    For error 1, follow these instructions:
    a. Create a new domain account DOMAIN\myApp_Admin
    b. add DOMAIN\myApp_Admin to local admin group
    c. add DOMAIN\myApp_Admin to Farm Administrators group
       Central Admin site --> Site Settings --> People and groups
       Add DOMAIN\myApp_Admin
    For error 2 & 3, follow these instructions:
    1. Grant DOMAIN\myApp_Admin accont a sysadmin server role on SQL server
    2. Open SharePoint Power Shell and execute Add-SPShellAdmin <DOMAIN\myApp_Admin> command.
    3. Grant DOMAIN\myApp_Admin a db_owner rights to web application Content database that you would like to use for debugging SharePoint 2013 app.
    4. Make sure following roles are assigned for SharePoint_Config database
       SharePoint_Shell_Access
       SPDDataAccess
       public
    5. Make sure following roles are assigned for SharePoint_Content database
       db_owner
    5. Make sure following roles are assigned for SharePoint_AdminContent database
       public

  • Participant 'weblogic' does not have permissions to execute the operation ?

    Hello,
    We have modelize our Business process, this process can start with
    An Automtaic task based on an event recevied from a web services or via a start event with an iniator task.
    The deployment of this process was ok.
    But when we try to run this process in the "Business Process Workspace" we get the folowing message : "Participant 'weblogic' does not have permissions to execute the operation. "
    The users has the corresponding role of the lane so it should be right ?
    Thanks
    Grégoire.

    Hi Heidi,
    The Application list does contain the process link.
    However, in the admin role association's page, the roles of the process are not present, and as such cannot be assigned. I've tried adding a role according to the naming convention but I assume they must be associated explicitly to the process by the deployment process...
    We have loads of roles related to processses that have since been undeployed.
    So what do you advise? Should we try to undeploy and redeploy the process? This was already been done and, as far as I know, with the same result.
    Thanks
    Miguel

  • Ignore errors in the Operator steps

    Hi
    Is there a way to ignore errors in an Operator task step without checking "Ignore Errors" box located on the Definition tab of that step? So far the only way I can run it is to check that box and execute the interface by right clicking the Operator task and selecting rerun, but that way I can't schedule it.. Thanks for you help..

    Hi,
    In your interface,go to Control tab give 100% in Maximum number error allowed.
    I am not sure whether this is what you are looking for.
    Thanks,
    Guru

  • Trying to reload firefox and getting this message, when moving to the applications folder: "The operation can't be completed because you don't have permission to access some of the items."

    Been having problems with Firefox/internet for several days, and all my updates seemed current. I decided to try to reload and have removed the other icons/download attempts from the app file. When I try to drag the icon into apps, I now get this message:
    The operation can’t be completed because you don’t have permission to access some of the items.

    * Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    * Trash the current Firefox application to do a clean (re)install.
    * Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • The operation can't be completed because you don't have the necessary permission.

    My wife and I share files on our home network all the time. the problem is when I create files on my Mac Pro or Macbook Pro (.doc, .tif, .jpg, .psd, .png, etc) and place them on her Mac Mini. she can not edit them. She gets the message: "The operation can’t be completed because you don’t have the necessary permission."
    The only way I know how to fix the problem is to delete the file from her Mac, change the permissions on my Mac (via Get Info), and then re-copy the file back to her computer. The problem is there are hundreds of files, in different folders on her Mac, so using a batch command with Get Info (Cmd, Option I) is not an option.
    First of all why are all the files I create "Read only" for "staff" and "everyone" in first place?
    Is the problem with my computer or with hers?
    Is there a way for her to overide the permissions so I dont have to spend days or weeks going through every file I have created on my Mac?
    Here is a screeen shot of one file:
    Here is a Screen shot of the Folder on her MacMini that I drop files into:

    She needs to connect to the file server with your name and password. Then she'll have the same access you have. I assume that's what you want.

  • Can't move any files... "The operation can't be completed because you don't have permission to access some of the items."

    This is a strange one... I just recently did a complete format/reinstall of Lion because of very poor performance after upgrading.
    So I'm on a totally fresh system, no TimeMachine restore or anything. I've installed all my apps from scratch - no prefrence file backups or anything. Everything is fresh.
    Yesterday I tried to copy a file from one folder to another and I got the error "The operation can’t be completed because you don’t have permission to access some of the items". Checked file permissions... repaired disk permissions... made sure I was logged in as admin (I only have one account)... everything looks good.
    This is now happening when trying to copy any files anywhere on my machine... Very frustrating.
    There's a couple strange side-effects I've noticed:
    - I can move & copy files just fine in terminal... without sudo...
    - The little lock icon in the bottom right of the Get Info window doesn't do anything - I can't unlock it. I can still edit the permissions for the file/folder but I can't select the "apply to enclosed items..." option.
    Does anybody know what the heck is going on?

    jsd2 wrote:
    Try creating a new admin user account, logging into it, and then creating some new items on the Desktop and elsewhere. Does the same thing happen there?
    Ok the strangeness continues!
    I created a new "TestAdmin" account, but it doesn't show up in the Users & Groups prefrences sidebar... The /Users/testadmin folder was created, but the account doesn't show up in the prefrences or login window...
    I tried a reboot to see if the account would show up and it still doesnt.... However after the reboot I am now able to copy files again!
    I'm paranoid that the problem will show up again since I have no idea what fixed it. I tried rebooting previously after repairing permissions which didn't solve the issue so it's not like I haven't rebooted since it started.
    And now I have the issue of not being able to create user accounts.
    A little dissapointed with Lion to be honest... the new features are cool but there are so many little bugs it really feels half-baked.

  • Can't save multiple folders to external drive. Get: "The operation can't be completed because you don't have permission to access some of the items." when dragging large folders to mac os extended journalled external drive from OS 10.6.8

    Hi
    I am feeling  VERY desperate!
    After losing an external drive [dont ask....]  -   I got  another one :  2TB WD formatted properly [ OS extended journalled for mac ] ready for action to move  my thousands of files and images and ppts in hundreds of folders across from the laptop to this drive because I travel a bit with the laptop and this is too risky not to back up at home.
    But this message came up after starting on moving folders across [** and not straight away, sometimes after moving  a folder  when  4 of 6 gb of files across  then the message comes up  = very frustrating]:
    "The operation can’t be completed because you don't have permission to access some of the items."
    I am  dragging mixed sometimes large complex folders to this  os extended journalled external drive from my mac book pro OS 10.6.8  - it would take decades to move items one by one or even folder by folder and really confusing. 
    I have  dragged-copied  various small folders and files across successfully, but it is only working 50:50 and I can't leave machine with the idea of things copying eg: overnight - it just won't work....
    I have been browsing google and find some people describing in CODE how they overcome this 'message'   .... but  I  [and I guess some other viewers of this in future & also in desperation]  would need  instructions for beginners....  to try this type of thing.  I don't know any code.
    How can this be happening - I feel ANGRY at APPLE !!!!  for not posting easy fix instructions yet re; this, or better still  updating software so it doesn't happen [ that I can find at least  !!! ] .   There seem to be hundreds of people stuck with this stupid message and inability to back up their projects etc.
    Can anyone help ?
    Many thanks
    Julie
    15 August 2011

    hi Samberl
    thanks a lot for the fast reply.
    I was dragging folders from main folders on the laptop-desktop  onto the external drive icon - to copy them across....
    Your suggestion sounds very promising -  I didn't know about 'cloning'.
    Yes the idea is to backup the laptop -    I thought I would just move it all now, new - and then keep saving/dragging physically   across to the new drive myself each day or two...
    Would this be the sizeof the internal hard drive = c.500 gb  ?   =   under the HD icon on desktop is written  : 
    " 499.76gb , 311.5 gb free  " 
    I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
    I have found CCC [carbon copy cloner] googling - looks good.
    When CCC site says it backs up  the hard drive - would this  mean all my files  [over 100 gb] that are mostly  in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon,  would all copy across successfully [wherever they are in the computer ]  ?
    thanks again, hope you can clarify these things and then I will go for it. 
    It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
    Julie

  • I get this error code when trying to update from an older version of Firefox: The operation can't be completed because you don't have permission to access some of the items.

    While trying to upgrade from a previous version of Firefox, I get this error code: "The operation can’t be completed because you don’t have permission to access some of the items."
    == installing ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.

  • I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?

    I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?

    Isn't that only used when a PC will not boot?
    What options does booting with this give me?
    Thanks
    JK MCP
    Hi,
    USB recovery disk was used to recover your system when it encounter problem. You can try to use it to fix your problem instead reinstall system. However, there is no method to keep your program whenreinstall system.
    Roger Lu
    TechNet Community Support

  • Error occurred in deployment step 'Add Solution': Operation is not valid due to the current state of the object

    hi,
      when i was trying to deploy a SP  solution from my vs 2012 solution. this error  is displayed.
    i tried many things like
    1) get the wsp and apply power shell cmds to add and deploy, here also it failed:
    Add-SPSolution -LiteralPath d:\mywsp.wsp
    Install-SPSolution mywsp.wsp -GacDeployment -AllWebApplications -Local
    2) restart the timer services and  do  iisreset and  reboot the server. etc .as mentioned in one of the  the below  blogs:
    http://sharepoint1on1.blogspot.in/2014/04/sharepoint-error-occurred-in-deployment.html
    http://suehernandez.wordpress.com/2011/03/31/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
    http://www.dotnetsharepoint.com/2014/04/error-occurred-in-deployment-step-add.html
    http://social.msdn.microsoft.com/Forums/en-US/63adde23-03cf-4b65-923e-1219da94a780/error-occurred-in-deployment-step-add-solution-operation-is-not-valid-due-to-the-current-state-of?forum=sharepointdevelopmentprevious
    http://www.shakirmajeed.com/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
    but even after doing all these steps, the  error still persists!. and am not deploying into a remote server, the dev env is in a VM, where sp 2013, vs 2012, sql 2012  are installed.
    just wanna share one  note:   there is a isue in my search admin component. index was reset due to some reason. and from that time onwards my search full/incremental crawls were not working!
    will this cause an issue in my wsp deployment ? i hope  it wont, still  asking...
    can anyone help me how to resolve this error.because this is a  show stopper for me for the last few days!
    help is highly appreciated!

    This issue cause because of feature activation failure while WSP deployment.
    when you create a WSP using visual studio, it creates WSP package with default deployment configuration settings.
    Please restrict feature activation configuration, this will help you to troubleshoot this issue.
    - Click on Project in WSP and press F4, it will open "Project Properties"
    - set "Active deployment Configuration" - as "No Activation"
    - you can activate this features in required sequence after deployment using Activate-SPFeature
    If my contribution helps you, please click Mark As Answer on that post and Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • Error_27_Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.

    I created a SharePoint 2013 farm solution project in Visual Studio 2013 (running on the same machine where SharePoint 2013 server is running) with
    event receiver.  I added web.config at project root level to store connection string (I'm working off external SQL DB) and got the following error during deployement:
    Error 27
    Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.
    When I commented out the ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString; the error went away.  Am I missing something or not supposed to add my own App.config to SharePoint project solution? 

    Hi,
    From your description, you might want to store your connection string in web.config and there is an error during deployment.
    It is recommended to store the configuration data of SharePoint solution in either property bags or hierarchical object store.
    The links below will provide more information about this:
    http://blogs.msdn.com/b/zwsong/archive/2012/03/27/where-should-you-store-your-sharepoint-solution-s-configuration-data.aspx
    http://msdn.microsoft.com/en-us/library/ff647766.aspx
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they
    help and unmark them if they provide no help. If you have feedback for TechNet
    Subscriber Support, contact [email protected]
    Patrick Liang
    TechNet Community Support

  • On tnsfr to applic folder, I get "The operation can't be completed because you don't have permission to access some of the items.

    i'm trying to update from 3.2, but when I try to transfer the download to the application
    folder I get the message, "The operation can’t be completed because you don’t have permission to access some of the items."

    See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    Trash the current Firefox application to do a clean reinstall.
    Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Maybe you are looking for