Don't get result when I put empty column in addition

Hi all !
I've got some difficulty to get a total when I put empty column of a table in an addition in my sql query. All the data type are the same.
Some one can help me with that please
Thanks in advance
Eric

Thanks Richard.  My 5.1 mixdown type is Front+Rear+LFE.  I can see why I may not hear a center channel solo as my 5.1 amp does not have HDMI inputs and the MAtrox Mini Max only offers HDMI audio out or RCA 2 channel stereo out (which is what I have to use).
However, with the meter levels showing plenty of audio in the center channel, I thought I'd at least hear it in the finished Blu Ray.  Could it be some setting in Surcode?  I basically get 4.1 with all speakers except the center giving sound.  If I put my ear up to the center channel I can hear slightly some sound.  My other home theatre system does the same.  I can find very little info on this from surcode manuals and they haven't responded to my emails.
I have 6 stereo tracks I created from the original audio using Audition and imported them into Premiere and set the master to 5.1 with the 6 channels as standard.  The 5.1 mappings for channel assignments (device mappings for the Matrox player) match the rest of the sequence.
Are you familiar with surcode?  Like I say I can hear the LS and RS, L&R, and LFE perfectly in the authored BD-RE (and it sounds wonderful even without the center channel), but I get nothing (or next to nothing) out of the center channel.  I have some future projects coming up where this would not be acceptable.
I am a long time NLE editor going back to the 90s, but those were all DVDs and this is my first Blu-Ray and Surround sound project.
Any more helpful suggestions?  It is much appreciated.
Thanks
Steve

Similar Messages

  • I don't get notifications when I get a call so it ...

    Hey 
    I get the yellow thingy when somene calls but how the hell can I answer when I don't get the pop-up box? So it just closes automatically lol and I have to call back. Always.
    So yeah the pop-up box would be REALLY bloody great for me.
    Thanks!

    https://support.skype.com/en/faq/FA3501/what-is-a-​status-setting-and-how-do-i-change-it-in-skype-for​...

  • Can someone help please. I recently boughYou have no bookmarks.t a IPad Air, when I go to Utube on Google I don't get sound, when I go to the same site on Safari I get sound? Thank you. Mark

    I recently bought a iPad air, when I use Google and go to Utube I do not get sound, when I go to the same site using Safari I do get sound? Can someone explain please, thank you. Mark

    Hello there, Mark.
    The following Knowledge Base article offers up some great recommendations for troubleshooting issues with apps downloaded from the App Store:
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/ts1702
    In your case you may also want to close all apps that are running during the "Restart the App" step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Printed photos from Aperture 3.2.1 have lines through them - don't get that when printing from iPhoto

    I recently downloaded Aperture 3.2.1 and after editing a couple photos (love that process!), tried to print them.  Both had horizontal lines across the entire photo.  I don't have this problem when printing from iPhoto.
    As an FYI, I have this problem when printing from PSE too, but worked around it by importing edited photo back into iPhoto and printing from there.  I don't want to do that with Aperture, because they have much better printing choices.
    I have a Canon MP 500 & a Canon IP 4300 - same issue with either one.
    I contacted Canon tech support and got this reply:
    We appreciate your correspondence regarding your PIXMA MP500. I am sorry that lines are printing through photos printed from aperture.
    If aperture is the only program the issue occurs with then the print setting in aperture will need to be changed. You will need to use the icc profiles for the paper you are using. For details changing the print preferences in aperture please goto: http://www.redrivercatalog.com/profiles/how-to-use-icc-color-printer-profiles-ap erture-3-canon.html
    I looked at the link and basically had a brain freeze.  It was very complex, and I was concerned that it was for Red River papers - I use HP paper.
    I called HP to get their instructions for icc color printer profiles - complete zero.  They said it's a printer issue and would be happy to sell me a HP printer.
    Please, can anyone help a struggling Aperture newbie?  I'm so frustrated.
    Thanks - Jma

    Hello Kirby,
    Your recap is correct.  I ran Apple Software Update and both programs are up to date.  I looked on Canon's site and there are no new firmware updates for either printer.
    When I select "print" in Aperture, I've selected the Canon MP500.   Under the "Rendering" section, the color profile offers six different selections that include the MP500.  I've tried them all.  They all have lines through them.  There is a note, in grey, beneath the Color Profile box, that says to "Turn off color management in the printer driver".  I have absolutely no idea how to do that, and I've googled it, to no avail
    Under "Render Intent" I've tried both selections - Relative Colorimetric and Perceptual.  Still, lines through both.
    This is really discouraging.  Both printers work perfectly fine - with iPhoto, so it's hard for me to justify buying a new printer.  And how do I know I wouldn't have the same problem with a new printer?
    Fingers crossed that this can be resolved.  I have several photos I'm supposed to be printing for gifts.  And if the problem is in Aperture or PSE, won't the lines still be there even if I use one of the online printing companies?

  • Does an object get cloned when you put it in a Map?

    When you call the put method on a Map, does it clone the object you're "putting" in the Map, or does the Map just hold a reference?
    Thanks for any help!

    Everything is a reference (except the primatives like int, obviously). Java never does any of the nastiness of C++ where it will sometimes copy an object, and sometimes this and sometimes that. Everything except the primatives is a reference, and all method parameters are passed by value. Period.

  • I don't get tones when a message arrives

    For some reason I no longer hear a tone when a message arrives on my iPhone 5.  Occasionally I do get a tone, but usually not - any suggestions?

    Check to make sure you do not have the 'Do Not Disturb' feature turned on.  Swipe up from the bottom of the screen and make sure the crescent-shaped moon icon is not highlighted.  If so, turn it off.  Make sure you do not have your phone set to vibrate and that your volume is loud enough to hear the tone alert.

  • HT5622 I don't get sound when I get a text

    can not get sound with text

    Hi, Doug.
    I would recommend closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.  Test the results after processing these steps.
    If the issue persists, make sure the Ring/Silent switch is not switched to silent.  Also, make sure there is an assigned tone to messages under Settings > Sounds. 
    Cheers,
    Jason H. 

  • Color corrections don't get processed when burned in DVD Studio Pro

    I am working on an FCP project that has alot of darkened day for night clips. I export using compressor at best quality, and project looks great in viewer in DVD Studio Pro, but for some reason when I burn the final DVD and watch it, all the darkness changes are gone, and the footage is in it's original state. What is causing this? How can I burn a DVD that looks like what I am exporting?? Other thing is that when I burn a quicktime of the same project to a DVD using toast, the color changes remain, and they look more accurate- I thought Quicktime would be lower quality than Compressor?

    I have acutaly been using this technique on a recent project, and have a few additional observations:
    One is that, even if you use a black background in your menu, and map your button colors to black, not all players generate the overlay colors the same way, and the black patches sometimes appear lighter then the background, particularly on software players, since computers are generating RGB vs. YUV.
    Another detail is that when a button is activated, the overlays disappear, and all the button graphics embedded in the background are visible while the player switches to the new menu. I have however used the following workaround for this: Generally players will display a freeze frame of the background of the menu while switching to the jump target, usually the first frame or loop point of a menu with motion assets. By creating each menu as an animation where the buttons fade up in the first few frames, I can create a "clean" background for use as the freeze frame displayed during the switch.
    This particular disc hhas a tight bit budget, and lots of menus, and so I am creating very short motion assets (1 second) and setting them to "still" at end. I haven't acutally checked this on a player yet, to see whter the still or the beginning of the asset gets used as the freeze frame, I'll post back with the answer after I have tested it.

  • I have a catalog of 13.000 pictures, I have done an editing and done several sets. When I put the stars in a set, and chose to show the pictures with attributes it says there is no picture. Why ?

    So the problem is that I have a set of images with stars, and when I chose the filter, it does not show the pictures. I need this kind of workflow to edit such a massive ammount of pictures. I'm a documentary/street photographer and I mix the things.
    Any possible solution?

    Rated in Italian is Valutazione. No it does not work, that's the problem!

  • Quicktime files get squished when I put them back in iMovie

    I cannot for the life of me figure out why this is so. I am using quicktime pro in order to make a couple of "picture in picture" shots. Then I try importing the new clip into iMovie, but it doesn't look the same. Either one, two or all of the clips are squished together or not centered.
    Does anyone have an idea why this may be so?

    I cannot for the life of me figure out why this is so. I am using quicktime pro in order to make a couple of "picture in picture" shots. Then I try importing the new clip into iMovie, but it doesn't look the same. Either one, two or all of the clips are squished together or not centered.
    iMovie works natively in the DV compression format. So if you are playing around in QT Pro in some other format and them importing the files to iMove, they are being reconverted to DV compressed frames at specific frame sizes that may throw off any x/y-axis offsets you may have applied at other dimensions. In this case, it is generally best to do all your editing of individual clips in the editor, output the edited files in your targeted compression format, and then create your "picture-in-picture" scaled off-set display as the final step in QT Pro.

  • I don't get sound when I record video, but I do on download video recorder apps

    So I tried to record a video yesterday for Vine app, and there was no sound, and I thought that's weird, so I tried it on the normal video recorder app, and no sound. I downloaded a video recorder app, and the sound works on that... so what's wrong with my phone? How do I fix that?

    Hello there, Mark.
    The following Knowledge Base article offers up some great recommendations for troubleshooting issues with apps downloaded from the App Store:
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/ts1702
    In your case you may also want to close all apps that are running during the "Restart the App" step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How to get result behave differently for one column?

    Hi,
    I have 3 columns in a Bex report say A, B and C.
    C = A % B.
    Results for columns as desired :
    Result of A = Summation of all values of A
    Result of B = Summation of all values of B
    <u><b>Result of C = Result of A % Result of B.</b></u>
    But at present result for C = Summation of all values of C.
    How to achieve the result for C as desired i.e Result of A % Result of B?
    Plz note formula for column C is already there and equal to A% B.
    All help appreciated and rewarded by points.
    Thanks,
    Gaurav
    Message was edited by:
            Gaurav
    Message was edited by:
            Gaurav

    Gaurav,
    Just interested ..
    Isn't your scenario something like this?
    A     B     C (%)
    2     4     50
    2     8     25
    4     12     75  (Result)  this is right 4%12
    Would n't the Result of percentages C be equal to Result of A % Result of B?
    Maybe I am missing something completely.
    Mathew.
    Message was edited by:
            Mathew Muthalaly

  • Shared Reminders: How do I stop getting emails when changes are made?

    My wife and I both have iPhone 5's that we bought 2 weeks ago. We are sharing a calendar and a "Grocery" list in reminders. I have everything set up where it is working properly but I keep getting emails when a change is made to the grocery list. I don't get emails when there are changes to the calendar.
    I want to stop getting emails when there are changes made to our grocery list but I am not sure how to do it. We both have icloud accounts and we both have checked the box under preferences in my calendar for "in app notifications" for icloud invitations. When I open Reminders in icloud I don't see a preferences for reminders.
    If it helps , or makes any difference, my wife has a yahoo mail account and I have a hotmail account. She does not get emails about changes being made.
    thanks

    Did you try to switch Push "off" and fetch to "manually"? This way no mail is delivered until you choose to open the mail app. The moment you open Mail on your device, your mail account will be checked and if any, mail will be delivered.
    Fetch New Data
    This setting lets you turn Push on or off for MobileMe, Microsoft Exchange, Yahoo!, and any other push accounts on iPhone. Push accounts deliver new information to iPhone whenever new information appears on the server (some delays may occur). You might want to turn Push off to suspend delivery of email and other information, or to conserve battery life.
    When Push is off, and with accounts that don’t support push, data can still be fetched—that is, iPhone can check with the server and see if new information is available. Use the Fetch New Data setting to determine how often data is requested. For optimal battery life, don’t fetch too often.
    Turn Push on: Choose “Mail, Contacts, Calendars” > Fetch New Data, then tap to turn Push on.
    Set the interval to fetch data: Choose “Mail, Contacts, Calendars” > Fetch New Data, then choose how often you want to fetch data for all accounts.
    To conserve battery life, fetch less frequently.
    Setting Push to OFF (or setting Fetch to Manually on the Fetch New Data screen) overrides individual account settings.
    page 203 iPhone_User_Guide
    Message was edited by: Ingo2711

  • I really don't get it

    Hi,
    I have a logical problem, I can't understand what is happening. I have Linksys router (Network A) close to the modem to which I connected an Airport Express AE (Network B) through LAN wire going to my room. I use AE for wireless printing and airplay. If I check internet speed with speedtest.net I have with network A 2.5 Mbps, and with Network B 5.5 Mbps (so far so good).
    Now what I don't get. When I want to watch live and free TV channels with internet with network A everything works perfectly and with network B image and sound are having huge problems ... as if the connection is poor. No other apps running or what ever that can decrease network speed.
    If I use the same network B to watch same channels through the iPhone - no problems again ... and it's the same app (well one is on computer the other on iPhone). If I watch TV on the computer with other apps - same problem remains (Network A works nicely, Network B unwatchable).
    Any idea? Any suggestion? I feel a bit stupid for not getting where's the problem. If it was in the app then why it works perfectly with Network A and if it's the network why it works nicely with iPhone? And if it's combination of two with my computer ...
    Thanks in advance,
    Ivan

    Hi,
    I have a logical problem, I can't understand what is happening. I have Linksys router (Network A) close to the modem to which I connected an Airport Express AE (Network B) through LAN wire going to my room. I use AE for wireless printing and airplay. If I check internet speed with speedtest.net I have with network A 2.5 Mbps, and with Network B 5.5 Mbps (so far so good).
    Now what I don't get. When I want to watch live and free TV channels with internet with network A everything works perfectly and with network B image and sound are having huge problems ... as if the connection is poor. No other apps running or what ever that can decrease network speed.
    If I use the same network B to watch same channels through the iPhone - no problems again ... and it's the same app (well one is on computer the other on iPhone). If I watch TV on the computer with other apps - same problem remains (Network A works nicely, Network B unwatchable).
    Any idea? Any suggestion? I feel a bit stupid for not getting where's the problem. If it was in the app then why it works perfectly with Network A and if it's the network why it works nicely with iPhone? And if it's combination of two with my computer ...
    Thanks in advance,
    Ivan

  • Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!

    Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!

    Hannahjadepurnell wrote:
    From giffgaff.
    i Don't actually mean when you put it In the phone. I mean when you try to take the slot out of the phone with the pin. As soon as I pulled it out it bent.
    That makes less sense as the sim tray a fairly stiff metal and should be pulled straight out once released. You didn't answer the question about where is was bought. Is is a real iPhone?

Maybe you are looking for