Don't group ncmpcpp with terminal in dockbarX

hi there,
perhaps somebody has an idea on how to accomplish the following:
i'm using mpd+ncmpcpp to listen to my music. the panel i'm using is dockbarX (dockX standalone) which groups similar windows in one single icon - just like windows' superbar.
this actually is just the way i like it - with the exception of ncmpcpp which of course gets grouped with other opened xterm-windows. but i'd rather have an extra icon for it.
can somebody share his thoughts on this? maybe specify an alternative default terminal-emulator for ncmpcpp? how can it be done? with a bash-script?
any help is welcome. thnak you very much.
Last edited by mumo (2012-11-08 18:47:03)

hi,
dockX indeed supports .desktop-files to be pinned to it.
that's exactly the way i tried to accomplish this i created music.desktop which links to music.sh which again starts mpd+ncmpcpp. of course it gets grouped in the default terminal icon. and that's where i'm stuck i just do not have a clue on how to differentiate between those.
i have used urxvt for a while but i have to admit i have never figured out about its benefits^^ might it be easier to accomplish with urxvt?

Similar Messages

How can i delete contacts completely so that they don´t mix up with new addresses and groups?

how can i delete contacts completely so that they don´t mix up with new addresses and groups?
Alle geänderten Adressen oder Gruppen erscheinen immer wieder bei der Adresseingabe von mails.
Chaos!

Group Text with Android Doesn't Work

Hi- I had been using an iPhone for a few years, and decided to switch over to Android. It took some time to get my phone number disassociated from iMessage/iCloud, but I was eventually able to get that done. Since iOS8 came out, though, I'm starting to experience problems again. Specifically, whenever I group text with multiple iPhone users, everything works fine -- until my wife (an iPhone 6 user) is added into the group. When this happens, everything automatically switches back to iMessage and I stop receiving any messages.
Has anyone else experienced this? Are there any fixes?
Thanks

Just in case other people found my post by Googling, here is my fix I added to my post on the OpenOffice forum.
Re: Text to speech only reads the document title
by Trish8 » Sat Feb 14, 2015 9:58 am
I tried as many suggestions as I could from the plethora of suggestions above. I'm sure you are correct, it must be the Mac's problem. I took a chance and downloaded LibreOffice; Text to Speech now works the same as it does on TextEdit, the internet, and PdF. Thanks for all the help, I mean that sincerely. OpenOffice is a really fine product.
Patt

Can I group charts with objects in Numbers 3.0?

In Numbers 2.1 I could group charts with objects and text. I can't get this to work in Numbers 3.0. The objects will group but not the charts.
I used this to create marked-up charts in Numbers and paste them into a Pages document.
(I just purchased a new iMac and don't have the old Numbers on it.)

The only way around this is to print to PDF and open in preview, then use the rectangular selection tool to select the are you want to add to pages, then copy, then paste into Pages.
You can post feedback to Apple using the menu item "Numbers > Provide Numbers Feedback"
There are several features that were dropped and may be added back in... see this link:
http://support.apple.com/kb/HT6049?viewlocale=en_US&locale=en_US

Analytical Services failed to get user's parent group tree with Error

Hi,
We have a frequent errror during our weekly batch for an application.
The context:
- Essbase Administration Services we are using is version is 9.3.1.
- 8 applications are calculated during the week-end. The scripts executed are exactly the same for the 8 applications.
- For example let's say that 5 scripts are launched during the night in the batch for each application (script 1, script 2 ... script 5)
- App1 and App2 are launched alone and before the 6 others applications as these applications database are 3 x bigger (App1 is calculated alone, then app2 is calculated alone, then app3 to app8 scripts are launched in the same time).
The issue :
- We don't see any issue for app3 to app8, the calculation are executed without any problem from script1 to script5.
- But we have an error in App1 and App2 log when the bath execute script 4 and we see the following error in the server log **
"Analytical Services failed to get user's parent group tree with Error".
(** : we don't see any log for script 4 in the application log - it's like the server bypass script 4 to go directly from script 3 to script 5 )
Nothing special is done in script 4 but just an aggregation of the Year dimension (using a @SUM(@RELATIVE(Year,0)) calculation.
I think that there is may be a synchronization error with Shared Services but what is strange is that it's always for the same script 4 and the batch is launched at different time every week-end.
Can the issue be linked to the size of the database of applications (8 Gb) and difficulties for the processor to executes aggregation in a large database volume ?

Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

IOS 8 creating multiple group messages with same recipients

After updating to iOS 8.0, my iPhone 5s has started creating multiple group messages with the same recipients. For example, my phone has created three group threads with the exact same people in it. Different friends' messages go to different threads. It is terrible confusing and annoying. It has done this with several of my group messages. Deleting the duplicate threads have not worked. They keep recreating themselves when certain people text the group.
Any suggestions? This has been a problem for many of my friends as well.

Hi hkapn,
Do you and your wife use the same Apple ID and are connected to the same wifi network? Your phone ringing to multiple devices is called Continuity and is a feature of iOS8. https://www.apple.com/ios/whats-new/continuity/
Essentially, it allows you to use your iPhone cellular connection on all of your iOS8 devices: iPhone, iPad, Mac computers with Yosemite. On some devices the call will look like it is coming through FaceTime, but likely on your wife's iPhone it just looked like a regular call.
Since your iPhone was "hosting" the phone call through it's own cellular connection, you were able to pick it up after your wife answered, which caused your wife's phone to disconnect. This is called Handoff and is also a feature of iOS8.
You can turn off Continuity if you'd like, but you could also look into getting your wife her own Apple ID. I'm guessing you were sharing one so that you didn't have to make purchases twice. Also in iOS8, there is a feature called Family Sharing which allows you to link multiple Apple IDs and share purchases (among other things).
In regards to the group text message issue, as far as I can tell, splitting group messages is NOT a feature. I agree that there should be an answer to this already!

I can't make a group conversation with my friends help

Ok so I tried to make a group conversation with my friends but it says it failed to send help!! idk if it's because one of my friends doesnt have an I phone but I don't think that's the problem because I could txt him in a seperate conversation. Then I asked my friend to make it and she did but I havent gotten any of the txts please help

Hi Elle1018,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you're unable to send or receive messages from a particular contact, please follow the steps in the article linked to below.
iOS: Troubleshooting Messages - Apple Support
Take care,
Alex H.

Group texts with iPhone and Android

I made a group text with 17 of my friends, some on iPhone and some on Android. It started out as one group text, thenme and a couple of other people found that it was creating different group texts. These new group texts wouldnt have certain people in each, there turned out to be about a total of four different group texts going on. What is a probable cause of this? And is there a way to fix the problem without making everyone turn to a third party app?

Group texting is not one of the iPhone's stronger features. Group texting among a mix of iPhone and Android users is frequently a less than satisfactory experience. I'd go with the third party app. GroupMe is a nice cross platform app. It's free. It lets you mute certain groups if you don't want to be bothered for a while.

On Yosemite, pasteboard/clipboard no longer works with Terminal.

After upgrading to Yosemite, I can no longer copy text from other apps and then paste into Terminal. Nor can I drag a file from Finder to Terminal and get its path shown. With Terminal, clipboard/pasteboard now only works within its own sandbox.
Am I missing any new default options?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Phtoshop with Terminal Server

Hello.
We are using different products:
Photoshop
6.01
Photoshop CS
2.0
Photoshop CS
4.0
Photoshop   Elements
1.0
Photoshop   Elements
2.0
First question: Is it possible to run all of them with a terminal server? With terminal server I mean every user starts it's own session on the server when starting the programm. It doesn't matter on which kind of server (Windows, Citrix). We just want to know, if it is possible.
If we change our running systems to Windows 7 we have to change our products, too.
Adobe   Photoshop CS5
Adobe   Photoshop CS5
Adobe   Photoshop CS5
Adobe   Photoshop Elements 9
Adobe   Photoshop Elements 9
Can these programms be used with a terminal server?
Thanks a lot for the answer and the heldp.
David

I don't have Elements 1.0, so I can't answer for that version, though as I recall it was pretty closely related to Photoshop 6.0 or 7.0, so it should work.
For all other versions of Photoshop, I have brought them up over RDP and tested them, and they do run.
Note that OpenGL cannot be enabled over an RDP connection for Photoshop CS4 and CS5.x (not even with W7 SP1 and Server 2008 R2), so people expecting to use the several good features ONLY available when OpenGL is enabled may miss them. As with the other versions, the interactivity is generally diminished by remoting the relatively high bandwidth graphics operations across a link, because no matter how fast a link is it's nowhere near as direct as the PCIe buss to a local graphics card.
Generally speaking, Photoshop can be both extremely compute-intensive and put a lot of data out to the UI, so it's not a very good fit to running via Terminal Services. I certainly would prefer running it locally.
I do hope you have a good, responsive LAN between your terminal server and your clients, and a very healthy server.
-Noel

Hide a company to a windows group connect with trusted connection

I mean, how can I do, to create two groups in the windows active directory, and do users member of the first group and other to the second groups.
Now, when a user from the first group connect with client sap b1 with trusted connections doesn't see all companies (databases) but only those that I decide. The same thinks with the second group.
I don't want to use the 'sa' connections, because in the sap b1 8.8 the connections will be on server.

Not sure if understood correctly.
If you want to assign to each user only specific companies and you are using trusted connection to sql, you may modify
tmsp_getcomplist stored procedure in sbo_common for example as
USE [SBO-COMMON]
GO
/****** Object: StoredProcedure [dbo].[TmSp_GetCompList]    Script Date: 09/04/2009 10:01:56 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[TmSp_GetCompList]
--With Encryption
as
begin
set nocount on
declare @comps int
set @comps = 0
select @comps = count(1) from SRGC
if (@comps <= 0)
begin
     exec TmSp_RefreshCompList
end
declare @user as nvarchar(100)
SELECT @user = SYSTEM_USER
select * from SRGC
      where dbUser =   convert(varchar(50), CURRENT_USER)
and
(@user <> 'John' or (@user = 'John' and dbname = 'Demo') )
end
User John in this example will wee only demo company and the rest users will see all companies. Hope it helps.

Contacts don't accurately sync with Address Book

The contacts information on my iPod Touch don't totally match with the information in my Address Book on my iMac with Snow Leopard. I just totally Restored my iPod and reloaded everything from my iMac. Most of the contacts came over but not all. I'm missing a couple of groups and some individual entries. In a few cases, there are entries which I remember used to be there but they were previously deleted. They are not now in my Address Book but they did show up in the Contacts. It's like the sync dug back to an older version of the Address Book. Does anyone have any clues or hints?
BTW this is my first use of the Support Communities so please forgive any goofs.

Just to wrap this one up. After a couple of long sessions with Apple support we fixed it by exporting the Address Book and then importing the card images. I lost all my groups, but when I reassembled everything manually the problem was resolved. It appears that something was corrupted in the data. Some of this data came originally from my Palm Pilot and has been passed along through the years as a part of my conversion from Windows to Apple so any number of gremlins could have crept in. All looks fine now and I'm happily exploring my new iPad. I want to give special cudos to Marsha who stuck with me and finally got this squared away.

Change user type with terminal

Hi all,
I am trying to find the commands' to be able to change a 'Service' user from an Admin user to a standard user. I have found ways to do it via single user mode however i would like to be able to do this with terminal as i will be using remote desktop to change all the service users in my company. Any help would be great
Cheers

I can't take full credit for this. I found it at:
http://farbflash.de/cgi-bin/blosxom.cgi/?find=snippets
I did, however, know the command to look for.
The commands necessary to create an admin user are as follows:
sudo -s
niutil -create . /users/username
niutil -createprop . /users/username passwd \"\"
niutil -createprop . /users/username home /Users/username
niutil -createprop . /users/username shell /bin/tcsh
niutil -createprop . /users/username uid 520
niutil -createprop . /users/username gid 20
niutil -createprop . /users/username realname \"First Last\" - if this property is not created, the user won't appear in the loginwindow!
niutil -appendprop . /groups/admin users username - only for admin users!
These below are optional:
niutil -createprop . /users/username hint \"password hint\"
niutil -createprop . /users/username writerspassword username
niutil -createprop . /users/username writershint \"\"
niutil -createprop . /users/username writerspicture username
niutil -createprop . /users/username sharedDir Public
exit
There needs to be a valid home directory, shell, and/or SharedDir for the user. A home directory can be created as easily as:
sudo mkdir /Users/username
sudo chown username:staff /Users/username
Or if you want the default OS X user directory structure:
sudo cp -rp /System/Library/User Template/English.lproj /Users/username
sudo chown -R username:staff /Users/username
(/System/Library/User Template also has other localized language templates)
Additional info:
To change an admin user back to an ordinary user:
sudo niutil -destroyval . /groups/admin users username
Be careful to leave at least one accessible admin user, otherwise you will lock yourself out of your machine.
after changing netinfo:
sudo niutil -resync .
log out and in the user you changed.

Are there pepes out there using ipads to make group music with children who have profound and multiple learning difficulties? I am and I'd love to share the ideas.

Are there pepes out there using ipads to make group music with children who have profound and multiple learning difficulties? I am and I'd love to share the ideas.
I am the music teacher in a Special school in London UK currently working with Drake Music who are a charity that go into schools to enable music making through music technology. Our purpose is to enable a group of 7 children who have profound and multiple learning difficulties to play instruments on the ipads or through the soundbeam and to be able to play and jam together with me underscoring on the guitar. We're having a lot of fun and we're all learning a lot about what can be achieved using the amazing ipad technology. If you're doing a similar project I'd love to hear from you and we can swap notes!

See Recover your iTunes library from your iPod or iOS device.
You can use iTunes to easily manage multiple devices by having each sync with selected playlists. I don't personally have any recommendations for other software but perhaps others might.
tt2

Issue with Terminating Event - Reg

hi Gurus,
This might be a simple issue, but am not getting hold on a simple solution for my issue.
I'm working on ECC 6.0.
I have a custom workflow in which I have step1(A dialog task - Asynch) with a terminating event "COMPLETED" and then step 2 (A background task). once step1 is completed by user A, i am sending this WIACTUAL_AGENT to the step 2 in modifying some custom table data.
My issue is if user A finished the task(step 1) manually, then also the Term. event COMPLETED is getting triggered and hence the work item in user A's Inbox is disappearing. And then it's picking up user A as WIACTUAL_AGENT and sending to step 2. But, i need to distinguish or some how find out if the Termin. event occurred thru' execution of the workitem or manually performing the job. I looked into the workflow log for both the cases, and i don't find any clue with which i can differentiate that the Termin. event occurred thru' executing witem Vs. performing manually.
Anybody has any idea on how to find this out. Coz, depending on whether the action is done manually or thru' witem, i 'll be modifying the custom table data accordingly. Currently, for both the cases, when the Term. event occurs, the WIACTUAL_AGENT is same user A and hence it always is treating that the action is done thru' witem only, even though its done manually. This is because, when executed manually also, the step1 witem is ending with container element WIACTUAL_AGENT filled with user A and hence its proceeding with background task in step 2.
Any thoughts on how to tackle this issue. Your suggestions / input is really appreciated.
Thank you in advance. Pl let m

Hi Venu,
I have quickly created a sample workflow in my system.
Here is what I did:
1) Workflow will tigger to my inbox whenever Change master is created.
2) Created a custom task with object type ECM and method 'EDIT' with termination event 'Deleted'.
3) created fork step type with 2 branches and necessary branches 01.
4) one branch will execute the task created above
5) another branch will wait for the event "Deleted" of ECM
6) I have created a container element flag ( of type XFELD ).
7) In the wait event binding I am passing X to worklfow container element flag.
7) I have created change master from transaction CC01.
8) Received the worklfow and deleted the document via worklfow.
9) I checked the worklfow log and found that the flag container element is not populated
10) I have created one more change master from transaction CC01.
11) Received the worklfow but deleted the document outside the workflow.
12) I checked the worklfow log and found that the flag container element is populated with 'X' this time.
I think you can use that flag to differntiate whether the transaction was done outside worklfow or within the workflow.
Hope this helps.
Thanks.
Krishna.

Don't group ncmpcpp with terminal in dockbarX

Similar Messages

Maybe you are looking for