Don't have a Svhs cable converter

Hi!
I was given by a friend a Geforce4 MX440 AGP8X, as I had no graphics card of my own.
It works like a charm, but the thing is I want to connect it to the TV.
The Svhs port looks very strange, its got like 10 holes or something. I talked to a computer company and they say i need a converter that came with the card. Thing is my friend has moved, and i have no way to contact him.
Does anybody know how to solve this? I'd gladly buy a new cable like this, but the computer companies i've talked to say they don't sell them, except with the cards.
Thanks!
/David

http://www.msi.com.tw/program/about/w2b/index.php
     Hattelco AB
    Address:
    Fredsforsstigen 22-24 S-168-66, Bromma Sweden
    Telephone: +46 8 4452570
    Fax: +46 5 4452580
    Web: http://www.hattelco.se
    e-mail: [email protected]
       Santech Micro Group AB
    Address:
    Jupitervagen 10 194 27 Uppsland Vasby Sweden Sweden
    Telephone: +46 8 587 771 00
    Fax: +46 8 587 772 69
    Web: http://www.smg.net
    e-mail: [email protected]
       TD Tech Data AB
    Address:
    Fagerstagatan 18B 163 91 Stockholm-Lunda
    Telephone: +46 8 795 2000
    Fax: +46 8 795 2001
    Web:
    e-mail: [email protected]

Similar Messages

  • I have a Rs232/Rs485 converter(CV 24).How can I connect it from a rs485 to a rs232 cable?

    I have a RS 485(8 serial outputs) and a motor with a rs232 cable. I don´t have a comunication between the motor and the card...also I have a rs232/rs485 converter. How can I connect the converter to the card. Give me all the possible solutions.

    Hey bubuse,
    First of all make sure your motor is RS232. If you are using one of NI's 8 port RS485 cards (http://sine.ni.com/apps/we/nioc.vp?cid=1846〈=US) it should include a dongle that takes the connector out to individual 9-pin dsub connectors.
    From there, most RS232 cables have 9-pin dsub connectors and the converter should just plug in between the cables. Here is a link that shows the pinouts and voltage differences of both protocols.
    http://www.ni.com/pdf/manuals/371253a.pdf
    However, these devices rarely work well. If your motor is RS232 they I would suggest you purchase a RS232 board. NI has a new line of boards that are extremely fast and easy to use. They can hit custom baud rates and will show up as normal COM ports on your computer.
    In the long run you will have fewer problems.
    http://sine.ni.com/apps/we/nioc.vp?cid=13694〈=US
    I hope this helps out.
    JoshuaP
    National Instruments

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • I have a late 2011 model MacBook Pro running Mountain Lion.  I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV?  I used to run a cable from my mini display port to the HDMI input of a TV.

    I have a late 2011 model MacBook Pro running Mountain Lion.  I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV?  I used to run a cable from my mini display port to the HDMI input of a TV.  This feature seems to be lost in the Mountain Lion upgrade.  Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV?  There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

    Running a cable to the HDMI port is still supported. (and still works on mine).
    If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection.  Double check all cables.  If that doesn't work try a PRAM reset:
    http://support.apple.com/kb/ht1379

  • I have just download a book from itunes store but, i don't have an iPad to read it. Can anybody help me? Can i convert it? Thanks.

    i have just download a book from itunes store but, since i don't have an iPad, i can´t read it or even see it. Can anybody help me? Can i convert it? Thanks.

    Every purchase page for an ebook has a section that says "Requirements".  What does that say for your particular book?  That should give you the answer to your question.  Conversion is normally not possible.
    But there are some exceptions.  Please provide the Title of the book if you want further help.

  • Convert pdf to word doc-but don't have the export option.

    I want to convert a pdf (that I got from an email) into a Word doc so I can edit it the way I want to. However, for some reason now I don't have the 'Export' option in my File drop down list.
    Funny thing is, I've converted the document once already and have entirely forgotten how I did it obviously!
    I've made so many changes in my first conversion I want to start over.
    why don't I have the 'Export' option? Or ... when I do a 'save as' and chose 'word doc' it only does a copy - paste type save - where I can't make any changes. It's like it puts it into a text box or something.
    I have MSWord 2010.

    Hi Kelly,
    MsDennis1465 wrote:
    When I do the steps below, the Word doc that is saved is like a photo. I am unable to work with the document. Why does it do that? I have converted pdf’s before without that happening but I think I did it on a free 30-day trial of X Pro.
    This usually happens when you're dealing with a very poor quality scanned document that doesn't have enough data for the Acrobat OCR engine to actually process.
    As for Acrobat 6.0 Pro, I don't believe the Save as Word function was introduced until version 8.0, but it's been a few years and the memory of Acrobat 6 has faded a bit.
    -David

  • At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi - now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me! :)

    At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi -> now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me!

    Theres almost a trick to it for first time users, goto SETTINGS...General......Cellular (if Verizon) ....Personal Hotspot, turn it on.....turn on wifi on your Mac, select your Iphone.  Enter password.
    If you take too long doing it, youll need turn turn off and on real quick the "personal hotspot" slider on the Phone.......then go quick again thur the Mac.

  • What cables do I need to print wirelessly if i don't have an Airport Basestation?

    I recently bought an Epson Stylus NX230 with wireless capabilities but I am unsure about how to enable AirPrint feature because I don't understand the terminology in the manuals. Firstly, I don't know how to join my printer to my network (or if I actually need to do this) or  if I am mising a cable somewhere...I don't have the Airport BaseStation, so I am wondering if I have to buy this or if I can get a cable that supports my quest for wireless printing!
    I can print when the printer is attached using a USB, I have wifi enabled on my MacBook etc etc...! I understand how to add a printer via System preferences, so I really think it's a cabling issue!
    Please explain in non-tech speak if you have an answer for me

    Hi,
    You don't need any special cables to connect. You can use either VGA, DVI or HDMI cables they will work absolutely fine. There's no difference between an American and a British MacBook
    Regards,
    Gábor

  • I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

    I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

    What are you getting on the TV?  Are you getting a completely blank screen, or are you getting a message similar to 'no input detected'?  Or are you seeing the spiral galaxy desktop?  If you go into System Preferences -> Displays then do you have an 'Arrangements' tab?

  • Reset an Apple TV 3 but I don't have a micro usb cable right now. What to do?

    So, I want to reset an Apple TV 3 but I don't have a micro usb cable right now. What to do?

    I have mini USB cords but no micro USB cords. The instructions on the Apple website assume that the customer has a micro USB by stating, "Connect one end of the micro-USB cable to the back of your Apple TV, and the other end to one of your computer's USB ports." As a customer, I understand by the language used that I should have the micro USB included with the Apple TV. If we are to supply our own micro USB cables, a re-wording of the instructions would alleviate any misunderstandings. Apple should start out by writing, "You will need to obtain a micro USB cord separetely from the Apple TV."

  • TS1409 What if I don't have the Apple Component AV Cable or Apple Composite AV Cable to connect my iPod to? Do I have to buy one to watch videos on my iPod?

    What if I don't have the Apple Component AV Cable or Apple Composite AV Cable to connect my iPod to? Do I have to buy one to watch videos on my iPod?

    Hi there,
    I am assuming you have an ipod nano 6th gen (the small one with a touch screen)
    unfortunately, the ipod nano 6 gen can not play videos whatsoever unless you hack it so even with a cable it does not work.
    I hope this helps cus im new
    (if other generation ipod nano, just reply and i will help again )

  • Don't have a cable because of apple store what should I do?

    So i went into trinity Leeds apple store and took an iPad and the cable in and as it got replaced I was told that I had never brought in the cable which I did and now I am stuck without the cable and cannot use the iPad the person who helped me offered me a cable for £15 but I said no as I shouldn't have to pay for their mistake.. What should I do?

    Speak (nicely) to the store manager and explain.
    You don't have to use an Apple cable - there's cheaper ones on ebay and in some electronics stores.
     Cheers, Tom

  • TS1967 Hi !  I have connect my new i pad with usb cable to my pc but i don't have internet to it. What can i do?

    Hi !
    I have connect my new i pad with usb cable to my pc but i don't have internet to it.
    What can i do?
    Thanks
    M.Tintikaki

    Connecting the iPad to a computer via a cable does not provide Internet access to either.
    What are you attempting to do?

  • If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

    Hi I'm from Australia.
    If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

    Any specific recommendations for a standalone ADSL modem though?
    Always a good idea to use the modem that your service provider supplies or recommends....often free....since you know that it will be supported in the event of connection difficulties.
    I have made the mistake of choosing the "best" modem based on test reports....only to find out later that the ISP would not offer any support when I was having connection difficulties.
    The ISP blamed the modem. The modem support folks blamed the ISP.

  • How can I use pdf pack to convert cubase documents  (music scores)  into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

    How can I use pdf pack to convert cubase documents  (music scores)  into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

    Hi mariab,
    What format are those music scores (I'm not familiar with cubase documents). But, it may be that Adobe PDF Pack doesn't support that format. In that case, Acrobat is the way to go. You can then print your files to PDF as you'd like. You're welcome to try Acrobat for free for 30 days to see whether it's going to work for you. If you decide it is, and you'd like to use it going forward, you could convert your PDF Pack subscription into an Acrobat subscription.
    Best,
    Sara

Maybe you are looking for

  • How do I disable "up next" on itunes 11 (or at least make it play the next song in my playlist and not some random one)

    ITunes 10 was great and I heard nothing but horror stories about 11 so I didn't upgrade until I got my new computer and pushed my music over.  In fact, I accidentally hit update and disconnected my computer from the Internet to stop it from happening

  • BUG: Code Insight

    JDeveloper 11g Preview 2 on Windows XP Code Insight is not refreshing properly. Two use cases: 1) Light grayed out indicator that member variable is not in use in a source file does not reliably disappear if you copy and paste exact member variable n

  • Substitution for Section Code to Bus Area

    Hi Peers I want to do one substitution in MIRO for the Business Area field.   If i enter the Section code as 123, the sysytem should pick the business area as 555. How can i do it. Plz explain me the steps in detail. Regards Rajaram

  • Public process in 3A4

    Is it valid to have public processes in 3A4 PIP like 3A7 and 3A8?

  • CRM2015 IFD Internal and External Domains

    I am trying to setup CRM2015 with IFD. My internal domain is xr.local and external domain name is somethingelse.com. When going through the directions and searching through the forums I see similar questions regarding with no real information on the