Don't have marvel.conf

We are doing an install of HTML DB on an application/web server with the necessary HTTP Server for forms and reports.
I have installed HTML DB on a linked computer that is running v9 - and the install went smoothly (after I figured out I needed to create the SYSAUX tablespace).
My problem is with the post-installation instructions. It talks about changing the password entry in marvel.conf. It isn't on the app/web server. We do have a dads.conf.
Is there another set of instructions for this situation?
Thanks,
Steve Howard

Well, in previous installation guides, customers were guided to create a new marvel.conf file so that it would be consistent with the configuration files created during HTML DB installation from the 10gR1 or 10gR2 Companion CD. That turned out to be a silly idea, and confusing for customers (as evidenced by this posting).
So in APEX 3.0, we only discuss marvel.conf in the context of an upgrade installation and if you were already using marvel.conf. In new installations, we document to just edit the existing dads.conf file:
http://download-west.oracle.com/docs/cd/B32472_01/doc/install.300/b32468/post_inst.htm#BHAFJJDA
Joel

Similar Messages

Black screen but the xorg.log.0 don't have any error

I have a motherboard asus m4a78t-e with ati radeon hd 3300 video chip
and monitor samsung syncmaster 2333 with vga and dvi port I use the dvi port.
I have a strange behavior when ArchLinux start
Firts at all, the grup, next the boot secuence and when start the xorg I have a black screen , at firts I thought that the xorg was the guilty but when I saw the xorg,log.0(I start in console mode) and didn't find any error
I started the xorg and again black screen.
then I pressed crtl-alt-f1 without see nothing in my screen
and logme in at root and wrote "shutdown -h now" and my pc turn off
all this with my screen in black(for me this mean that the pc is not frozen).
I started the pc with x system and black screen, again .
The monitor have vga and dvi port. I use the dvi port. Trying diferent things I discovered that my monitor have a function to change between vga and dvi port and when the x system star with the black screen I press the monitor button, change to vga and then press again to change vdi and buala I have my kdm screen.
The problem is that I must to do this every time that start my pc or restart the x system for example when I logout.
I use the last kernel 2.6.32-ARCH and xf86-video-ati 6.12.4-3 and xorg-server 1.7.3.902-1 I suse hal, don't have xorg.conf file. The problem started after the update the xorg version from 1.6 to 1.7 approximately 2 Months ago.
Any suggestion?

Your "Vout" is a control, not an indicator. Nothing ever writes to it. Your FOR loop just pumps hot air and does not produce any output.
Calling an output of the formula node "Vout" is completely independent and does not magically write to an array control with the same name.
(What's the purpose of "R2" and "R2 2", seems redundant. Also learn about autoindexing. All your terminals belong before the loop, they need to be read only once)
LabVIEW Champion . Do more with less code and in less time .

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

Forbidden You don't have permission to access / virtualhostname / filename .html on this server.

Hello Everyone
I've just configured Apache on my Newly upgraded Mountain Lion on Macbook Pro 13.
Steps i followed to activate apache, php and mysql on my macbook pro is as follows:
http://coolestguyplanettech.com/downtown/install-and-configure-apache-mysql-php- and-phpmyadmin-osx-108-mountain-lion
I've configured the Sites folder and tested the http://localhost and find it working.
I created one file to test php configurations and found that they are also working perfectly.
Now i m creating a virtualhost with the name "rishtey.local" in /private/etc/apache2/extra/httpd-vhosts.conf as below:
<VirtualHost *:80>
    DocumentRoot "/Users/YogeshMunjal/Sites/Matrimonial/"
    ServerName rishtey.local
</VirtualHost>
But whenever i try to access the virutal directory as: http://localhost/rishtey.local
it gives me following error:
Forbidden
You don't have permission to access /Rishtey.local/default_1.html on this server.
No matter if i am accessing php file or html file, error is same.
directory permissions are as below:
drwxrwxrwx@ 156 YogeshMunjal staff 5304 Dec 14 02:51 Matrimonial
have created httpd.conf file as well in the same directory as:
<Directory />
        Options FollowSymLinks
        AllowOverride All
        Order allow, deny
        Allow from all
</Directory>
Still nothing is working at all. please suggest the possible solution with it.
Thanks in advance for trying...

oh yes.. you are right... its accessible in
http:://rishtey.local/default_1.html
successfully... thanks for that... first of all
now issue is: when i access http://rishtey.local/test.php which contains just a tag to display php info only...
instead of rendering this php file, it just save the file in the download folder.
what could be the issue with it?

Help required in marvel.conf - servicenameformat

hi,
can some please guide me in the configuration of servicenameformat in the marvel.conf file.
I have host - test01
port - 1521
service name - rhino.acme.com
this fails. where about can I find out what is the correct configuration.
my database is working, my listener is running
rgds
alan

hi,
thanks, that did the trick. It was my mis-interpretation of the document.
it is now as you have pointed out and now opmnctl startall starts fine
rgds
alan

CF8.0.1 Standard (32bit) on Leopard 10.5.7 - Don't have permission to access /CFIDE/administrator/index.cfm

Attempting to install CF8.0.1 (32bit) on Leopard 10.5.7 server, keep getting error message "You don't have permission to access /CFIDE/administrator/index.cfm". Followed instructions from CF release notes "CF 8 update 1" part 2. Switched Apache from 64-bit to 32-bit mode (sudo lipo httpd -thin i386 -output httpd); using conf file (httpd.conf) in /etc/apache2. *Am confused by these instructions: (a) instructions for installing 64-bit CF8.0.1 on Mac OS X Leopard say to use "etc/httpd" for 32-bit installations. but (b) instructions found at end of document under Mac OS X Leopard say that you can configure 32-bit CF on Leopard, but you must use 64-bit Apache in 32-bit mode.... and the location for conf file (httpd.conf) is in "etc/apache2".
I'm attempting to install/run CF8.0.1 Standard (32-bit) via Apache2 (32-bit mode), but am unable to get access to /CFIDE/administrator/index.cfm to finish installation. File permissions for the CFIDE folder are System=RWX, Wheel=RX, Everyone=RX. What am I missing here?

I am having the same issue... Any help appreciated..

Error in marvel.conf file in Oracle Application Express 2.2

Hi All..
i have installed.. oracle 10g database , then installed oracle application server 10g 10.1.3
and then installing.. Oracle Application Express 2.2(APEX) , i have successfully installed APEX as instruction of documentation included in installation..
but i am getting error in.. marvel.conf file.. after creating marvel.conf file i am unable to stop or start Oracle Application Server or Oracle HTTP server ..
marvel.conf file Content as below..
Alias /i/ "D:\Oracle\Oracle10gAs\Apache\Apache\Images"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString Workshop2.jbdomain:1521:Ora10g ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apex
Allow from all
</Location>
i have also include path in httpd.conf
include "D:\Oracle\Oracle10gAs\Apache\modplsql\conf\marvel.conf"
after that i am going to stop or start HTTP Server i am getting error like thi..
"Syntax error on line 16 of d:/oracle/oracle10gas/apache/modplsql/conf/marvel.conf:
Invalid command 'PlsqlDocumentPath', perhaps mis-spelled or defined by a module not included in the server configuration"
Please.. Help..

I also have been puzzling around in the marvel.conf for hours yesturday, since I did not get the login-screen as well. Finally I found the solution (in the documentation of the DAD_README) : I removed the word "ServiceNameFormat", restarted the server and it worked. Maybe thes string is confusing the server.....
Jan.

Cisco Security Manager some firewalls don't have global policies assigned for the base definitions

Hello Experts,
In CSM 4.6 I noticed, some firewalls don't have global policies assigned for the base definitions like (SSH/SNMP/syslog/AAA,etc).
Unfortunately in Cisco CSM each policy has to be applied individually, it's easy to miss one policy or another. Is there any better way to verify and get the list of devices, which does not have SSH/SNMP/syslog/AAA
Thanks,

Sorry if this comes to late, I just now came across this thread. I have rtorrent and rutorrent sunning successfully on my x64 Arch Linux install.
Try putting the "SCGIMount /RPC2 127.0.0.1:5000" line in your httpd.conf file right after the LoadModule lines (it's line 124 for me).
I seem to recall it not working when I put it at the end of the file.
Best of Luck!
Martian

You don't have permission to access /cwhp/LiaisonServlet on this server.

Our CiscoWorks server rebooted and afterwards we received the following error message.
You don't have permsiion to access /cwhp/LiaisonServlet on this server.
I have recreated the SSL certificate.
I have stopped and restarted the Daemon service. No help.
I have attached a screenshot of the services running on the server.

I had the same issue, here's what TAC had me do, and calling the perl environment specifily for the configssl.pl scripts
Log into console as a local administrator and run this command
...\CSCOpx\setup\support\resetcasuser
Set the password manually (think its option 2 from the menu)
Now perform this procedure:
1) Stop LMS application
> net stop crmdmgtd
2) remove server.* under NMSROOT\MDC\Apache\conf\ssl
3) Toggle SSL, you will be asked to fill in some fields, the only one
that is mandatory is the Hostname which should match what you use to log
into the server (http://:1741).
NMSROOT\bin\perl NMSROOT\MDC\Apache\bin\ConfigSSL.pl -disable
NMSROOT\bin\perl NMSROOT\MDC\Apache\bin\ConfigSSL.pl -enable
4) Run this step only if you are NOT using SSL mode (https://...).
NMSROOT\bin\perl NMSROOT\MDC\Apache\bin\ConfigSSL.pl -disable
5) Start LMS application
> net start crmdmgtd
6) Ensure that the following files are created under
NMSROOT\MDC\Apache\conf\ssl
server.crt
server.key
server.pk8

Don't have permission to access /idc on this server.

Hi,
I just installed Content Server on Red Hat Enterprise.
It installed without an error and it's running, I can see it using ps aux.
My Server Instance Name and Server Instance Label are: idc2
This is the configuration in httpd.conf
LoadModule IdcApacheAuth "/home/ucm/idc2/shared/os/linux64/lib/IdcApache22Auth.so"
IdcUserDB idc_db "/home/ucm/idc2/data/users/userdb.txt"
Alias /idc "/home/ucm/idc2/weblayout"
+<Location /idc>+
+     Order allow,deny+
+     Allow from all+
+     DirectoryIndex portal.htm+
+     IdcSecurity idc_db+
+</Location>+
When I try to http://localhost/idc I receive this error:
Forbidden
You don't have permission to access /idc on this server.
I checked the userdb.txt, it's in the right possition and it contains:
anonymous                    Public

Hi !
Under Debian it works perfectly if you add the same lines into +/etc/apache2/sites-available/default+ file between the <VirtualHost *:80></VirtualHost>
tags.
Maybe it could work as well under Red Hat.

Forbidden - You don't have permission to access /i/doc/start.htm

I installed APEX 3.0.1 on an 11.5.10.2 technology stack (Oracle Applications 11i), but am getting an error when trying to access apex help. The error I am getting is “Forbidden - You don't have permission to access /i/doc/start.htm on this server.” Moving around in help, I get this in other “/i/doc” files. Everything else seems to work fine. My apache configurations for the applications are:
in wdbsvr.app:
[DAD_apex]
connect_string = %s_weboh_twotask%
password = <password>
username = apex_public_user
default_page = apex
document_table = wwv_flow_file_objects$
document_path = docs
document_proc = wwv_flow_file_mgr.process_download
reuse = Yes
enablesso = No
stateful = STATELESS_RESET
nls_lang = AMERICAN_AMERICA.AL32UTF8
custom_auth = Basic
in httpd.conf:
Alias /i/ "/oraapps/prod/prodora/iAS/Apache/images/"
AddType text/xml xbl
AddType text/x-component htc
Any help would be appreciated.
Thanks.
-Scott

I installed APEX 3.0.1 on an 11.5.10.2 technology stack (Oracle Applications 11i), but am getting an error when trying to access apex help. The error I am getting is “Forbidden - You don't have permission to access /i/doc/start.htm on this server.” Moving around in help, I get this in other “/i/doc” files. Everything else seems to work fine. My apache configurations for the applications are:
in wdbsvr.app:
[DAD_apex]
connect_string = %s_weboh_twotask%
password = <password>
username = apex_public_user
default_page = apex
document_table = wwv_flow_file_objects$
document_path = docs
document_proc = wwv_flow_file_mgr.process_download
reuse = Yes
enablesso = No
stateful = STATELESS_RESET
nls_lang = AMERICAN_AMERICA.AL32UTF8
custom_auth = Basic
in httpd.conf:
Alias /i/ "/oraapps/prod/prodora/iAS/Apache/images/"
AddType text/xml xbl
AddType text/x-component htc
Any help would be appreciated.
Thanks.
-Scott

Forbidden --You don't have permission to access /pls/htmldb/htmldb on this

Hi ,
I have recently installed htmldb 2.0 on oracle 10g. When I am trying to access the URL ,
http://hostname:7777/pls/htmldb
getting the following error:
Forbidden
You don't have permission to access /pls/htmldb/htmldb on this server.
Can you please help me how to resolve this error.
TIA

Jes,
Thank you so much for your help. My current dads.conf file looks like the following:
<Location /pls/orasso>
SetHandler pls_handler
Order deny,allow
Allow from All
AllowOverride None
PlsqlDatabaseUsername orasso
PlsqlDatabasePassword @Bdfw2X+sa2pQQU1rQTzjmc==
PlsqlDatabaseConnectString cn=test10g,cn=oraclecontext NetServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode SingleSignOn
PlsqlSessionCookieName orasso
PlsqlDocumentTablename orasso.wwdoc_document
PlsqlDocumentPath docs
PlsqlDocumentProcedure orasso.wwdoc_process.process_download
PlsqlDefaultPage orasso.home
PlsqlPathAlias url
PlsqlPathAliasProcedure orasso.wwpth_api_alias.process_download
</Location>
# HTMLDB Configuration#
Alias /i/ "D:\OraInfra\Apache\Apache/images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword %html_db_public_user_pwd%
PlsqlDatabaseConnectString testas.nrtc.coop:1521:test10g.nrtc.coop
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
We are using Oracle Application server 10g HTTP server with HTMLDB. My error_log says:
[Wed May 31 11:13:12 2006] [notice] FastCGI: process manager initialized
[Wed May 31 11:15:22 2006] [notice] FastCGI: process manager initialized
[Wed May 31 11:17:57 2006] [error] [client 10.1.0.34] [ecid: 1149088676:10.1.0.34:4652:4380:1,0] mod_plsql: /pls/htmldb/htmldb_admin HTTP-403 ORA-1017 ORA-01017: invalid username/password; logon denied\n
[Wed May 31 11:19:05 2006] [error] [client 10.1.0.34] [ecid: 1149088745:10.1.0.34:4652:3448:2,0] mod_plsql: /pls/htmldb/htmldb HTTP-403 ORA-1017 ORA-01017: invalid username/password; logon denied\n
[Wed May 31 11:26:28 2006] [error] [client 10.1.6.60] [ecid: 1149089188:10.1.0.34:4652:440:2,0] mod_plsql: /pls/htmldb/htmldb HTTP-403 ORA-1017 ORA-01017: invalid username/password; logon denied\n
[Wed May 31 11:55:47 2006] [notice] FastCGI: process manager initialized
[Wed May 31 11:56:36 2006] [error] [client 10.1.0.34] [ecid: 1149090996:10.1.0.34:2820:2308:1,0] mod_plsql: DAD '/pls/htmldb' is disabled because of misconfiguration. Please refer to the log entries during server startup for more information.
[Wed May 31 12:03:00 2006] [notice] FastCGI: process manager initialized
[Wed May 31 12:03:46 2006] [error] [client 10.1.0.34] [ecid: 1149091426:10.1.0.34:2068:1564:1,0] mod_plsql: DAD '/pls/htmldb' is disabled because of misconfiguration. Please refer to the log entries during server startup for more information.
[Wed May 31 12:03:50 2006] [error] [client 10.1.0.34] [ecid: 1149091430:10.1.0.34:2068:568:1,0] mod_plsql: DAD '/pls/htmldb' is disabled because of misconfiguration. Please refer to the log entries during server startup for more information.
[Wed May 31 12:06:55 2006] [notice] FastCGI: process manager initialized
[Wed May 31 12:10:06 2006] [notice] FastCGI: process manager initialized
[Wed May 31 12:16:22 2006] [notice] FastCGI: process manager initialized
[Wed May 31 12:17:59 2006] [notice] FastCGI: process manager initialized
[Wed May 31 12:19:13 2006] [error] [client 10.1.0.34] [ecid: 1149092353:10.1.0.34:5260:5944:1,0] mod_plsql: DAD '/pls/htmldb' is disabled because of misconfiguration. Please refer to the log entries during server startup for more information.
[Wed May 31 12:20:22 2006] [error] [client 10.1.0.34] [ecid: 1149092422:10.1.0.34:5260:4660:1,0] mod_plsql: DAD '/pls/htmldb' is disabled because of misconfiguration. Please refer to the log entries during server startup for more information.
Any ideas
Thanks
Michael

I don´t have sound in Vintage B3 Organs, why?

I don´t have sound in Vintage organs. Don´t know why.

Winblowz99 wrote:What is your sound card? What driver does it use? Is the driver loaded (and in your rc.conf)? Is ALSA setup?
How do I check all that things?
The sound card is part of the mother board

I have a 27 in. iMac with the latest version of Snow Leopard. When Lion comes out, will it be software I purchase and download online? I am trying to prepare for cost and don't have a point of reference, having been a Windows guy until last summer.

I want to know what to expect in terms of moving from one OS to another. Having been a Windows guy until last summer, my only experience is going from one version of Windows to another, which is usually a fairly costly purchase. I will want to go to Lion, but as a retired teacher, my income is fixed. I am not looking for a specific price, I am sure that is unknown, but I would just like to know help Apple does these things so I won't be sadly surprised.

Historically Apple has sold OS X upgrades via DVD media however with the advent of the Mac Apple Store that throws another possibility into the mix. That's about as much as I can say as these forums don't allow us to speculate about future products. As for the cost historically Apple has priced OS X upgrades between $29-$129, the last upgrade (Snow Leopard) was only $29 but that was an exception. Again we cannot speculate on these forums about that. The good news is that Apple is unlike Microsoft which makes OS upgrades expensive and complicated. The choice with OS X is do you want a server version (most users don't need one) or a single computer license. The users that buy server versions tend to have a number of Macs they manage from a server, most consumers don't have this issue.
Keep reading the news, as you know Apple has announced a Summer release for Lion.
Upgrades on OS X are usually very simple. I've upgraded from Tiger to Leopard to Snow Leopard and each transition has been very easy. With any major OS upgrade there are some basic rules to follow, for example always, always, always backup prior to any update. When Lion is released to the general public post again for what to do to prepare or even do a Google search on "How to prepare for OS X upgrade" and you will find a number of articles that will provide some suggestions and valuable insight. You can also re-post here and users will be happy to assist.

Itunes says I don't have an internet connection but I can access the internet. I turned my firewall off. How do I get onto itunes store

I can't access my itunes store, it says I don't have an internet connection but I do. I tried updating to the newest version of itunes, turned off my firewall, checked to make sure itunes was allowed in my internet options. what else can i do?

Hello bigblue8
Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Don't have marvel.conf

Similar Messages

Maybe you are looking for