Don't have permission to access my files after using Migration Assistant with my PC?

The transfer took over 6 hours, so I would appreciate any help other than suggestions to just try it again! At first I couldn't find where Migration Assistant put my files, but I found them in /users/(Windows user name which is actually different than Mac username). Lion made that step a little tricky, since it doesn't seem too eager to navigate me to the root of my hard drive. The folder icons have red symbols in the lower right hand corner of them, and when I try to access them, I receive the following message: The folder “Desktop” can’t be opened because you don’t have permission to see its contents.
Any help is really appreciated!

Try holding alt or option key when starting iPhoto to choose a new Library.

Similar Messages

Relocating music files after using migration assistant and time machine

Hello
I recently purchased an i7 MBP because my previous 15 in was stolen. Luckily I had a time machine backup of the old machine - my previous MBP was the Intel 2 Core Duo model just before the refresh to the i5/i7s
So far what I did is ran migration assistant to bring my files over
Everything seems to be fine, except when I got to iTunes much of my music is listed but I get the exclamation mark symbol next to most of the music and movies and apps
I am trying to figure out how to fix this and relocate my files
I know I could access my time machine backup by browsing other time machine disks, but I can't browse the music folder in a previous backup because I don't have the permisson to access it
Any suggestions would be greatly appreciated!!

Victor:
If you correctly transferred your music files the problem is with your iTunes Library file.
Open iTunes and quickly press the option key. A window will show to ask you to select the library file. Browse for it and it should fix the problem.

I can't find my migrated files after using migration assistant

I can't find my migrated music folder despite the migration assistant saying it had been successful. After looking in system preferences > user groups I see no other account for me to access. This is my first mac, and therefore a complete novice to this system therefore any help would be gratefully appreciated. Thanks.

This is my first mac
Did you try migration from a Windows based computer?
If so, try this support article > iTunes: How to move your music to a new computer

Trying to copy folders from a time machine back up but the operation can't be completed because you don't have permission to access certain files

Good morning,
I am trying to compy some folder from my time machine back up onto my desktop and I have changed the privilige for my back up to read and write...but it;s still not letting my copy the files. How come?

See Pondini's TM FAQs for starters.

I cannot install Firefox 4: I get the message that I don't have permission to access some files

I am the system administrator. How can I fix my permissions?

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

TS1394 My pictures file is locked. Don't have permission to access iPhoto library after Yosemite upgrade. How do I dump the new Pictures file and restore the old?

Just upgraded to Yosemite 10.10.1 iPhoto gives me a permissions error when I try to access the photo library. When I track down the "Pictures" folders, the new "blessed" Pictures folder (with camera on the folder) is empty. The previous Pictures folder, now a generic folder named "Pictures" is found at MacHD>Users>Guest, with a no access red circle/white bar in the lower right corner. Get info tells me that "Guest" has read/write privileges, but not me, logged on with administrator password. Logging in as "Guest" does no good, the folder is no longer findable. Disk Utility Permissions repair and restart, both as Guest and with the administrator password are fruitless. I cannot alter the locked Pictures folder. Will moving the "blessed" pictures folder to the trash and restarting possibly fix this? If not, then how? Thanks.

Try holding alt or option key when starting iPhoto to choose a new Library.

Hi, I have a macbook pro with a new hard drive installed. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files'

hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.

See E-10 in the first link.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

Can't move any files... "The operation can't be completed because you don't have permission to access some of the items."

This is a strange one... I just recently did a complete format/reinstall of Lion because of very poor performance after upgrading.
So I'm on a totally fresh system, no TimeMachine restore or anything. I've installed all my apps from scratch - no prefrence file backups or anything. Everything is fresh.
Yesterday I tried to copy a file from one folder to another and I got the error "The operation can’t be completed because you don’t have permission to access some of the items". Checked file permissions... repaired disk permissions... made sure I was logged in as admin (I only have one account)... everything looks good.
This is now happening when trying to copy any files anywhere on my machine... Very frustrating.
There's a couple strange side-effects I've noticed:
- I can move & copy files just fine in terminal... without sudo...
- The little lock icon in the bottom right of the Get Info window doesn't do anything - I can't unlock it. I can still edit the permissions for the file/folder but I can't select the "apply to enclosed items..." option.
Does anybody know what the heck is going on?

jsd2 wrote:
Try creating a new admin user account, logging into it, and then creating some new items on the Desktop and elsewhere. Does the same thing happen there?
Ok the strangeness continues!
I created a new "TestAdmin" account, but it doesn't show up in the Users & Groups prefrences sidebar... The /Users/testadmin folder was created, but the account doesn't show up in the prefrences or login window...
I tried a reboot to see if the account would show up and it still doesnt.... However after the reboot I am now able to copy files again!
I'm paranoid that the problem will show up again since I have no idea what fixed it. I tried rebooting previously after repairing permissions which didn't solve the issue so it's not like I haven't rebooted since it started.
And now I have the issue of not being able to create user accounts.
A little dissapointed with Lion to be honest... the new features are cool but there are so many little bugs it really feels half-baked.

The operation can't be completed because you don't have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

The operation can’t be completed because you don’t have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section?

I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

Yes- it is a Mac. I went through adobes system requirements and re- downloaded supportive software. The notice seems to happen near the end of the down load with the messages above. I'll look into your suggestion. Thank you- appreciated.

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc

The File could not be found or you don't have permission to access it.

I teach Acrobat in a junior college. For an assignment students are to share an Acrobat portfolio file via Acrobat.com. So far two students have attempted to do that, I have clicked the link in the email message generated by Acrobat.com, and in each instance the error message in this discussion heading appeared.

Michelle,
I don't sign in. The moment Acrobat.com opens, it displays the error
message, "The File could not be found or you don't have permission to
access it." So, I'm guessing that the automatic sign-in email address is
different than the one used when sending me a shared file notice.
People use Acrobat.com to share files with individuals, most of whom
don't have Acrobat.com IDs. Those non-members gain access smoothly.
There shouldn't be a bouncer at the door to refuse entry to those who
have Acrobat.com IDs but who happen to have multiple email addresses.
You need to simply allow entry to all persons receiving invitations to
download files whether or not they have an Acrobat.com ID.
Jeff
=========

File Vault: You don't have permission to access /~anybody/ on this server.

I tried it on several machines without success:
403 Forbidden
You don't have permission to access /~anybody/ on this server.
Apache/1.3.33 Server at localhost.local Port 80
I can reach the main site on the computer but not the user site if user was setup with File Fault.
I did control permissions and tried this issue on other machines with clean installed 10.4.x
:::[Wed Apr 4 13:19:17 2007] [error] [client 192.168.0.10] (13)Permission denied: access to /~anybody/ failed because search permissions are missing on a component of the path:::
NO SOLUTION. IS THIS A BUG?

If I log in to a FileVault user's account, change the group of that user's home folder to "www" and allow group "---x" permissions, it is possible, from another account, to access "http://127.0.0.1/~filevaultuser". I'm not in a situation where I can test access from a different machine, and my system is PPC, not Intel, but I don't think that should matter. I'm not sure why it is not working for you.
Note that for it to work requires that the user is logged in (otherwise, because of how FileVault works, the "~/Sites" folder doesn't exist), and the permissions along the path "/Users/filevaultuser/Sites" have to allow "www" access. If the user is not logged in, access may fail for a couple of reasons. First, because the "Shared" folder doesn't exist - the home folder is encrypted - leading to a 404 error. Second, the permissions of "/Users/filevaultuser" may be "drwx------" by default (access only for the owner), leading to a permissions error.
It might help to recall that when a FileVault user's home folder is stored in an encrypted disk image "/Users/filevaultuser/filevaultuser.sparseimage", and when they log in, "/Users/filevaultuser" is moved to "/Users/.filevaultuser", and "/Users/.filevaultuser/filevaultuser.sparseimage" is mounted at "/Users/filevaultuser". I.e. the path "/Users/filevaultuser" refers to two different folders depending on whether or not the user is logged in.
..."it writes that if I'm looged in as the user which is using File Vault it should work - but it doesn't."...
I think that statement refers to 10.3 - lower in the article, it says that for Tiger, the "Public" folder won't be visible after logging in. It could also be referring to some changes made to personal file sharing that were made between 10.3 and 10.4, rather than a filevault specific issue.
Just to reiterate, I don't think enabling web sharing for a user that needs the security of FileVault is really a good idea. It might be better to give that user a second non-FileVault account, where they can place their materials. That way, the homepage would be available even if they are logged out.

Deleting a file that I "don't have permission to access"

I have ended up with an alias on the root level of my drive. The alias points to another computer that is no longer on the network and never will be again. The file cannot be trashed, I am informed I "don't have permission to access some of the items".
Could someone please tell me how to get rid of that file.
Thanks.

You can try this procedure:
http://support.apple.com/kb/HT1526?viewlocale=en_US
or this solution:
Open Terminal (Application-->Utilities-->Terminal)
1) paste:
*sudo rm -i*
(enter a single space after command)
2) then drag the file into the Terminal window (this is a shortcut to typing the file path,)
3) then press enter
4) enter your password
5) if the file is indeed the one you want deleted, then enter "y' (this deletion cannot be undone)
Message was edited by: leroydouglas

I'm trying to compress a file but I get an error that "I don't have permission to access dovecot." How do I get this permission?

I'm trying to compress a file but I get an error that "I don't have permission to access dovecot." How do I get this permission?

I ended up doing just as you said and downloading the program seperately. However, I'd like to point out that after I downloaded the server.app to my MBA it did allow me to compress it. For some reason it wouldn't let me do it from the server so I could airdrop it over. I'd only get the error previously mentioned. Must be a server thing eh?

Don't have permission to access my files after using Migration Assistant with my PC?

Similar Messages

Maybe you are looking for