"Don't have permission" to alter home folder.

I want to delete an item from folder DOCUMENTS in my home folder.  Message says that I don't have permission, and the INFORMATION window says that it is locked.  The lock checkbox is shaded out.  What is wrong?

Reset Home Folder Permissions and ACLs
http://www.fixkb.com/2011/08/reset-home-folder-permissions.html

Similar Messages

  • Can no longer access folders on my network. The folder can't be opened because you don't have permission to see its contents.

    Every since I nstalled maverick I have not been able to open folders through my home network. A dialoge box says
    The folder  can’t be opened because you don’t have permission to see its contents. I have always used an open network and never had issues. Now the strange part is I can open files if I use photoshop or illustrator to access them but I need to access all files not just select ones using a program.I have many shared folders on my network for everyone to access work files, none of them are working. I am running a dual system network with PC's and Macs.The files are, and always have been, located on an external drive attached to the primary PC as a shared drive.  PLEASE HELP

    https://discussions.apple.com/message/20971272#20971272

  • The folder "com.apple.TCC" can't be opened because you don't have permission to see its contents.

    I've noticed a folder with a 'no access' sign on it's bottom right corner - com.apple.TCC - and when i try to open it it says "The folder “com.apple.TCC” can’t be opened because you don’t have permission to see its contents."
    Does anyone know what this is and why i can't access it? No-one else uses this macbook but me.
    Also, as of this afternoon, I can't two finger scroll on any web browser?
    Thanks.

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use  another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • My MacBook Pro keeps saying The folder "Desktop" can't be opened because you don't have permission to see its contents.

    My MacBook Pro keeps saying The folder “Desktop” can’t be opened because you don’t have permission to see its contents.  I just took it in to the apple store a few weeks ago,  and since then I can't go into my desktop, I cant download anything to my computer. 

    Choose Home from the Finder's Go menu, click on the Desktop item, choose Get Info from the File menu, and give yourself read and write access in the Sharing & Permissions section.
    (92996)

  • You don't have permission to save the file "***" in the folder "Users"

    I changed name of Home folder according to this article: http://support.apple.com/kb/HT1428?viewlocale=en_US
    Everything was OK, but today I switch on Aperture 3, and when I'm trying to import some pictures, I have this message: 'You don't have permission to save the file "cichy" in the folder "Users".'... "cichy" is previous name of my Home folder. Any solution, how I can fix it?

    Thanks for quick answerr. Unfortunately I have OS X 10.8.4 - in article are 10 steps for OS X 10.5 or later, and 43 steops for OS X 10.4.11 and earlier... I didn't do step 28 - should I do the instructions for KeyChain?

  • Trying to reload firefox and getting this message, when moving to the applications folder: "The operation can't be completed because you don't have permission to access some of the items."

    Been having problems with Firefox/internet for several days, and all my updates seemed current. I decided to try to reload and have removed the other icons/download attempts from the app file. When I try to drag the icon into apps, I now get this message:
    The operation can’t be completed because you don’t have permission to access some of the items.

    * Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    * Trash the current Firefox application to do a clean (re)install.
    * Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder "Music" can't be opened because you don't have permission to see its contents."?

    I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder “Music” can’t be opened because you don’t have permission to see its contents".  Why cant i access the files from my old mac?  I tried the time machine and that isnt working either.  I have files that I need to use on my new mac, all my old programs and such.  I thought they said it was easy to get your files from one mac to another.  Please help.

    Your account names are probably different on the two Macs. If you know the UNIX command line, open a terminal window and run:
    $ id 
    You should see a line that starts with something like this:
    uid=501(your_user_id_here)
    now check the owner of the folder you copied over:
    $ ls -ld Music
    drwx------+ 8 some_user_id_here  staff  272 May 14 16:08 Music
    Do the IDs match? If not, you could change the ownership. Say your id is "johnsmith"
    $ chown -R johnsmith Music
    Now try and access it with iTunes.

  • On tnsfr to applic folder, I get "The operation can't be completed because you don't have permission to access some of the items.

    i'm trying to update from 3.2, but when I try to transfer the download to the application
    folder I get the message, "The operation can’t be completed because you don’t have permission to access some of the items."

    See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    Trash the current Firefox application to do a clean reinstall.
    Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Leopard.  Did a full restore from Time Machine.  Now I can't access my other internal and external drives.  I get the following error: The folder "Capture Video" can't be opened because you don't have permission to see its contents.

    Leopard.  Did a full restore from Time Machine.  Now I can't access my other internal and external drives.  I get the following error: The folder “Capture Video” can’t be opened because you don’t have permission to see its contents.  I have repaired permissions pn the main harddrive.  When I try too click on a disk I get the previously stated error.  I can't even open up information to see what permission/access there is.  It simply will not let me see the content.  It shows the content of my main hard drive when I have clicked the other harddrive's name.

    Solved:
    sudo chflags 0 /Volumes/"FCP Time Machine BU"
    sudo chown 0:80 /Volumes/"FCP Time Machine BU"
    sudo chmod 775 /Volumes/"FCP Time Machine BU"
    sudo chmod -N /Volumes/"FCP Time Machine BU"

  • After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents.  Any ideas?

    after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents."  Any ideas?

    Are you restoring from a TM backup??
    Check the methods Pondini outlines to do restore.
    Q14-17
    http://pondini.org/TM/FAQ.html

  • My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

    My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

    Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc

  • Unable to access time machine backup. The folder "Documents" can't be opened because you don't have permission to see its contents.

    My MacBook Pro with 750GB storage refuses to startup due to a problem with logic board (unfortunately I'm in Singapore and there is no Apple store here and zero customer support).  I'm trying to access some of the files from the time machine back-up using my MacBook Air with 120GB storage, but I'm unable to open the backup.  I receive an error message "you don't have permission to see its contents". Unable to access time machine backup. The folder “Documents” can’t be opened because you don’t have permission to see its contents.
    I don't really want to migrate the data from the time machine to the MacBook Air as I simply don't have sufficient storage space on the MacBook Air.  The iPhoto library which I'm trying to access is 200GB, which is more than the size of the MacBookAir.
    Is there any way I can view the photos and documents stored on the time machine backup.
    Thank you very much.

    When you setup the Mac, you created a Admin user account with say name X
    You ran Migration Assistant and it migrated user Y from the Windows machine.
    User Y has different permissions than User X.
    User X can't normally access User Y's account.
    So what you do is log out of User X via the Apple menu and into User Y, this way you have permission to access the files.
    If you want to transfer files from User Y to User X account
    Transfer files between user accounts on the same machine instructions
    Finder > Go menu > Computer
    A window appears with your boot drive, double click on it to open
    Inside is Users folder, double click to open it
    Inside is your User accounts, double click on the one you want to send files too
    Double click on the Public folder drop the files into the DropBox folder,
    The permissions will change and can be used in the other user account when you log into it and moved to the appropriate folders.
    Applications are typically installed and kept in the Applications folder which is a global access folder all users can access to run them from, but not all users can modify unless they are a Admin user.
    Windows programs won't run on a Mac, but they can be instaled into a virtual machine program that is running Windows.
    Windows in BootCamp or Virtual Machine?

  • The folder "cores" can't be opened because you don't have permission to see its contents.

    HELP, I did something very stupid.  I used my installation disk  and went into the disk utility and change the Volume Scheme to partition  it to 1 volume & named it Macintosh.  The prior hard drive name was possiby Macintosh HD and I renamed it Macintosh (this wiped out all the previous information).  Unfortunately I did not use the Time Machine to backup my information, but I use my Iomega  500GB eGo USB 2.0/FireWire 400/FireWire 800 Portable Hard Drive to backup my information .  I tried to retrieve the backup and it says that I do not have permission since I changed the previous hard drive’s  name.  What can I do to restore my old hard drive information. Shown below is what it shows: The folder “cores” can’t be opened because you don’t have permission to see its contents. Much appreciated if someone could help me.

    I am panicking now and I am so afraid that I lost all my information by what I did.
    Don't be upset. From what you've said, I don't see any reason to believe that you lost anything. You did make a lot of mistakes, though, starting with having only one backup and not testing it.
    I did not use any software when I did the backup.
    Yes, you did. You can't do anything with a computer without using software. Possibly what you mean is that you used the Finder. That's software. Or it may have been something else.
    Hopefully you can help me , but if you can't,  do you think if I contact someone at Apple can?
    I'll try to help you as time permits, but it might make you feel better to make an appointment at the "Genius Bar" of a local Apple Store. They aren't really geniuses and I can't promise they'll help you with this problem, but it doesn't cost anything.

  • Time Capsule Says: "The folder "Data" can't be opened because you don't have permission to see its contents."

    I have a new Mac 27 with two users.  Both are admins.  For the second user, it will not allow me to access the "Data" file on Time Capsule but instead tells me "The folder “Data” can’t be opened because you don’t have permission to see its contents."  I have tried all manner of "fixes" suggested on the internet without success.  Can anyone tell me how to fix this problem?  Many thanks.

    Are you trying to do both at once? There is an issue with TC where if you have one login user accessing the drive, another user cannot use it. You need one to log out so the other can log in. It is ok from another computer I think.. just you cannot maintain two logins from the same computer.

  • The folder ".Trashes" can't be opened because you don't have permission to see its contents.

    I cleaned out my hard drive right before upgrading to 10.9.2 and now I discovered I was a bit too heavy with the spring cleaning. I want to restore my iphoto library from the trash on my external hard drive but when I try and open it ( first I un-hid it ) I get the error
    The folder “.Trashes” can’t be opened because you don’t have permission to see its contents.
    So how do I get permission?

    Open the AppleScript Editor and run the following:
    tell application "Finder" to quit
    if (do shell script "defaults read com.apple.finder AppleShowAllFiles") is "1" then
    do shell script "defaults write com.apple.finder AppleShowAllFiles 0"
    else
    do shell script "defaults write com.apple.finder AppleShowAllFiles 1"
    end if
    delay 2
    tell application "Finder" to run
    Select the .Trashes folder in the Finder, choose Get Info from the File menu, give yourself read and write access in the Sharing & Permissions section of the window, repeat this process with the 501 folder if needed, move the library out, and run the script again.
    (105513)

Maybe you are looking for

  • Hyperlinked JSP Page does not refresh contents

    I have a very typical problem. In my application whenever I call a jsp page using hyperlink without any querystring attached to it the page called does not refresh. However when I press refresh on the browser it does refresh the contents. Basically i

  • Using path variable to CI under transaction file for DBTABLOG archiving

    Hello Colleagues, I have to configure DBTABLOG archiving among others under transaction file. Here you have to configure archive path to the filesystem. E.g.this is the path to the development system: DEV23015\Interfaces\Outbound\Archiving_IDOCs\<FIL

  • Will this fit my Mac

    I will upgrade my Harddrive but I don't know if this one Seagate Momentus SpinPoint ST1000LM024 1 TB will work? I got a Macbook Pro 13" medio 2009 150 GB.

  • Only 1 video out of several available to sync?

    Just wondering if I'm doing something wrong here. I'd like to sync all the videos I've been taking with my Iphone4 back to iTunes. When I check the "movies" tab in iTunes, only one video from my phone is available to sync. Any suggestions?

  • Please solve my query

    Sir,  I want to do the certification In Exchange server 2013. I am doing the preparation for 70-341 and 70-342 codes from these dumps: Microsoft.PracticeTest.70-341.v2013-08-21.by.Mo.105q  but there are many wrong answers in this Dump. Please give me