Don't know how to merge two calandra together

I have a Mobil me account and started a new one tommatch my itunes ID. Problem I am having is I want to merge the old accounts calendar to the new one. HELP, I can't figure it out

There is no way to join clips in iMovie 08 unless they were originally pieces of the same clip.
However, voiceover should be working across multiple clips in your project. Basically, once you click on a starting point and the voiceover begins recording, it shouldn't stop until you stop it or it hits the end of the project. There can be multiple clips between the start and stop points when recording a voiceover.

Similar Messages

I don't know how to fuse two clips together

hi
i would like to make a voice over on a series of clips but i can't do it unless i can fuse them together. is that possible?
to clarify- at the moment i can do the voice over but it can only be done one clip at a time which would make voice over virtually impossible since some of the clips are very short and the voice would continuously be interrupted.
thank you

There is no way to join clips in iMovie 08 unless they were originally pieces of the same clip.
However, voiceover should be working across multiple clips in your project. Basically, once you click on a starting point and the voiceover begins recording, it shouldn't stop until you stop it or it hits the end of the project. There can be multiple clips between the start and stop points when recording a voiceover.

IWebsites. Can anybody help me? Don't know how to publish two dif. sites

Hi,
Can anybody help me? I don't know how to publish two different websites to two different domains.
I have www.windypoint.ca (website is up and running)
and I have www.oldfriend.ca (website is ready in iWeb, but can't publish to www.oldfriend.ca
How do I do that?
Any/Every tip will be appreciated!!!
Thanks, Marc

Are you publishing to .Mac or or straight to your domain name via ftp?
It is just that the process is different for the two.
If you are using .Mac, then you are publishing using this and re-direct to your domain name at your host. If you are publishing directly, then you publish to a folder and use ftp.
You need to separate your sites out first, by copying the domain.sites file and then publishing to a folder and then uploading via ftp in the normal way.

Does anyone know who to merge two ipods together???

I have an ipod photo, that i've had for a year and i now just got a mini with 900 songs. i really don't want to delete those but i might have to. Does anyone know how i can move those songs into my library??? Please help!!

Songs under copyright that you don't have any legal right to should be erased from the iPod not copied into your library.
You agreed not to post about illegal activities when you created your Apple user account.

How to merge two pdf together?

in my plugin,i use the this.insertPages api to meger to pdf file,and can work in the javascript debug window,but i do not know how to pass the parameter to the api in the plugin.
can you give me some information about that ?

If you can make it work in the console, then you use the same string in the plugin.

Don't know how to combine two images

I've brought two separate images together but the problem is I'm trying to get the first image of a person inside the bird cage which is the second image. please help!

Since you don't seem to want to supply your images I'll try to simulate what you have. You basically have two layers. A background layer an image of a sky with a floating cage. Your second layer above it is a cutout girl
Step 1 turn off visibility of the girl and use Photoshop selection tools to select the cage. Magic wand or color range maybe pen tool whatever works best for you.
Step 2 turn on the visibility of the girl layer target that layer, invert the selection and click on the add layer mask icon in the layers palette to add it ask a layer mask.
Step 4 the layer mask is the current target. Select white paint and a small hard brush paint white to bring the girl back.
step 5 if you paint too much of the girl back in and wipe out some bars switch to black paint and paint the bars back in. Its very easy to paint straight lines. Click once on the top of the bar with black paint move the mouse pointer to the bottom of the bar press shift and click. A straight line will be drawn.

How to merge two folders together

hi
i have a music folder on my desktop. under my "music folder" i have different genre's eg 'rnb folder' 'house folder' 'dance folder'
everytime i download new music i put it into which ever folder is dedicated to that specific genre.
to keep things short:
i want to merge my music folder on my desktop with my music folder on my external hard drive.(so that my new music will be on my hard drive as well)
how do i do that?tried holding the 'option key' and the 'option,alt' on my keyboard as the other threads have mentioned.nothing works all i get is the option to "replace" or "stop". no merge option.
running mountain lion osx10.8.4
if anybody has some tips.
check youtube vids and other websites doesnt give the "merge" option.

If you can make it work in the console, then you use the same string in the plugin.

How to Merge two Pics together?

This has probably been asked a thousand times, but I am new to photoshop.! I am trying to take a pic of me and combine it with another one of my friend so it looks like we are standing beside each other. How do I do this? I am using photoshop.com. Any info/advice will be greatly appreciated! Thanks!

THe key to merging 2 pictures is to have the angle and color of light the same, and taken from the same perspective. Many ways to do this, but start simple by just using the move tool to move one pictue into another. Use the erase tool to erase unwanted portion of the pic. Once you try this you will probably move to more complex methods.

How to merge two images together

hi,
I sell mobile phone cases and want to produce my own images. I have taken images of the case and have taken the background off. I have found an image on the internet of the phone and want the phone to be merged into the case.
could someone please help me to do this.
thanks

In Editor, go to the expert tab.
Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer.

Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!

Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!

settings >>>>notifications>>>>Mail >>>>allow notifications >>>off (your choice )
settings>>>sounds>>>new mail>>>>none ( will kill rings )

Hi. I tried switching my Apple ID email address to my new email address and I don't know how to switch it for iCloud and iTunes. Please help!! It seems like Apple thinks I have two separate accounts, when I just tried to simply change it!

Hi. I tried switching my Apple ID email address to my new email address and I don't know how to switch it for iCloud and iTunes. Please help!! It seems like Apple thinks I have two separate accounts, when I just tried to simply change it!

Settings > Store > Sign Out.
Sign in with the correct ID.

How to merge two conflicting contact on iPhone and on laptop?

How to merge two conflicting contacts?
When syncing my iPhone w/ my Mac laptop, it seems that Apple does not provide an option that allows you to merge the data from two conflicting contacts. For example, you have a contact on your iPhone for Andy Summer and a contact on your laptop for Andy Summers - one contact contains only Andy's name and email address, the other contact contains only Andy's name and his mailing address. I'd like to be able to merge the data from these two contacts into one and save it to both, but the Conflict Resolver in the syncing program (I think it's in iTunes) does not offer an option for merging the two.
Does anyone have any knowledge about 1) how to merge data from two conflicting contacts, or 2) some other way to keep the data from each so that I don't have to choose one over the other?

Jawad,
First of all,You need to make teaming on both the interfaces on the server side.Which mode do you want to use? Active-Active or Active-Standby.
Server side :Active-Active - You need to configure the switch side to be a etherchannel/LACP. It can be done by the commands on the cisco 4006.
Server side :Active-Standby - You need nothing to do at the switch side.
Note: Seems PAGP is a proprietary of cisco. Server shouldn't know that. To be bound with mode "on" of "lacp" should be fine. It depends on the server side as well.
HTH
Thot

Hi!!I have some problems with the synchronization of my system, and I don´t know how I can solve this!

My system consists of differents vi´s.Some of them are used to read analogic inputs and digital inputs, using the serial port.
The values that I read, go through differents vi to be proccesed, and at the end, these values are written in a file, all the values in the same file.
My problems of synchronization are:
1. I have one vi per input, and all of them use the same serial port. How can I synchronize them to avoid serial port conflicts? (using queues??) And how can I do, to get differents number of samples/sg with every vi? I have to introduce them in differents loops?
2. The other problem is that, for example, I want to read 8 samples/ s but I only want
to write two samples every second. How can I do to avoid stoping the data flow?
Maybe, my problem is that I want to see the system like
one block, and I am ignoring that, although all the system works like a block, every part works using a different "speed". I don´t know how tools can I use to combine two ideas, working like an only system( data dependence, some vis need the data of others vi to be able to work) and working getting differents numbers of samples/s.
I have seen that there are synchronization vis. I am going to glance at them, maybe I find something interesting but I amsure that your help will be very useful?
Thanks in advanced!!
Graci

I think you are pretty much on the right track with Queues. I have implemented a very similar system myself using queues. I have even different systems connected to the serial interface, but I can synchronise them all easily using the following method:
1) Make a VI for opening the serial port and reading the data. The data (parsed to extract the numbers required) are then stored in an array (Shift register). If the pre-determined time delay is reached (say 5 seconds) the values are averaged and written to a Queue with a defined data type. Save the VI as a VI template.
2) Make a VI which starts an instance of this template VI for every channel you require. You can use VI Server to set values on the new front panel before you set it's property to "running". Setting a timer value for all can help ensure that the X-Axis of your timing values (if you require) are synchronised. The clue here is to define and initiate a QUEUE per channel. (RS-232_1, RS-232_2 and so on). The QUEUE name needs to be passed to the VI Template before running so that each VI running in the background has an individual link to the main program.
The second part of this VI simply uses an array of QUEUES, polling them one after another with a timeout of, say 5 ms. If data is found, append accordingly to an XY-Graph.
I also add in some "Auto termination" in the VI template (MAx number of values allowed in the QUEUE for example) to allow for the background processes to find out if the front-VI is still running or not. There are many different ways to do this, shoose the best for your application.
With this approach, it's not even important what instrument is connected as long as data is written in a specified format into a known QUEUE. I have also developed systems where I can transparently (almost) drop in VI Templates for instruments with similar functionality (output data) from different suppliers.
I would post an example, but the time it would take me to clean it up is too large. Sorry. If you have any further questions, don't hesitate to ask further questions.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess.

Don't know how to merge two calandra together

Similar Messages

Maybe you are looking for