Don't know how to setup a simple VLAN on the RVS4000

I'm sure it is my lack of knowledge of networks, but even after reading the manual (!) I don't understand how I can set-up a simple VLAN on my new RVS4000.
On my good old DrayTek it's very easy: it shows me a matrix of check boxes and all I have to do is click the ones that correspond to ports that can 'see' eachother. Something like this:
               Port 1   Port 2   Port 3   Port 4
VLAN 1    x                          x
VLAN 2                      x        x
VLAN 3             x                 x
VLAN 4
So port 1-3 can all 'see' port 4 (the Internet router) but they can't 'see' eachother.
Can anyone please show me the steps to take to accomplish this? Thanks a lot in advance!
Paul

OK, I will use it as a bookstand...
Since I obviously don't know enough about networks I will stay away from 'professional' products like the Cisco products.
The user interface and the documentation of these products are clearly made by nerds for nerds...
Thanks for your help.
Paul

Similar Messages

I don't know how to setup FF to open in last session of windows wont let me save current sessions like it used to ask me fairly disappointing can you help m? Phil

Question
i don't know how to setup FF to open in last session of windows wont let me save current sessions like it used to ask me fairly disappointing can you help m? Phil

''want FF to open in last session of windows -- won't ask me if I want to save current sessions like it before''
'''You can still have the old messages''', to make sure you get your tabs restored immediately, but with or without the messages and whichever way you respond to the message you can still get back your previous session through the History menu. (see item #31 "tabslost")
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#tabslost
You can make '''Firefox 6.0''' look like Firefox 3.6.*, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 6.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..

My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
Kind Regards

iTunes 11
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions.

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

I updated my I Phone 4 to the os 5.1.1 but lost all of my contacts. I believe it should still be stored in my laptop Apple file but don't know how to restore. I only see the restore option to the factory settings.

I updated my I Phone 4 to the os 5.1.1 but lost all of my contacts. I believe it should still be stored in my laptop Apple file but don't know how to restore. I only see the restore option to the factory settings. I have never used the I Cloud.

If you did not sync afterwards, follow this article to restore from your latest backup:
iTunes: Backing up, updating, and restoring iOS software

I don't know how, but I appear to have joined the Creative Cloud. How do I cancel membership?

I don't know how, but I appear to have joined the Creative Cloud. I don't need it & certainly don't want Adobe selling stuff to me. How do I cancel membership?

Hi Brain,
Please contact the support through call/chat for the cancellation request:
Contact Customer Care
Regards,
Sheena

Hi: When I open my iPhoto the popup shows up and I don't know how to correct it. Here is the popup "The current screen resolution is not optimal for iPhoto?" Can you help

When I open my iPhoto a popup shows up and I don't know how to correct it the popup:
"The current screen resoulation is not optimal for iPhotp"?
Can you help?

Go to the System/Accesability preference pane and enable the Zoom capability either with keystrokes or Magic Mouse:
See if that will work for you.
OT

HT1551 How do I view videos from my iPad on my HDTV? My photos stream on the screen saver, but I don't know how show videos I've taken on the TV. What doI need todo? Thanks.

I'm just setting up my AppleTV, and don't know how to transfer visuals from my iPad and iPhone to my HDTV with Apple TV. Would appreciate some help. Many thanks.

Airplay
http://support.apple.com/kb/HT4437?viewlocale=en_US&locale=en_US
Mirroring
http://support.apple.com/kb/ht5209

Don't know how to setup wireless D-Link router

I just bought a D-Link Wireless Router WBR-1310.
It is running, connect throught Ethernet to a high speed modem,
two computers are connected to the router with Ethernet cables (iMac on Mac OS 10.5.6 - G4 on Mac OS 10.4.11).
I don't use it in wireless mode because I don't understand how to do it (the manual mentions nothing about mac computers I don't understand why).
I want to disconnect my Ethernet cables (except the one between the modem and the router)
and use just the wireless mode for the 2 macs. What do I do?
I turned on AirPort on the iMac, disconnected the Ethernet cable but nothing works
(I loose the connection to Internet). When I select Airport it gives me a list of satellite names
and what not. I don't get it.
Should be easy, what should I do exactly.
I'm afraid to play around with the settings since everything works fine now with cables.
Thanks
Louis
Montréal, Québec
[email protected]

I don't want to detail all the steps re wireless set up but. 1.The scheme for a Mac is different only in the interface presentation and some minor features. You can certainly get it going on a Mac.
2. Get hold of a manual for a router that does describe a Mac set up, by download or otherwise and read it to get the general scheme.
3. Since it is running via the ethernet cable I assume you have the basic ADSL transmission parameters set so it is just a matter of the wireless signals to and from the device and encryption, and then setting the encryption passphrase up in each client card in the computers.
4. Note the default IP address of the router, and the default administration user name, and default admin password. These should be on the soleplate or in the literature.
5. Use a browser to browse to said IP address. just http:// then the number set , not www.
6. Enter admin username and password into pop up box. Do not worry about any 'certificate' warnings. It is a bit of hardware in your house you are going to not a dodgy site.
7. A website like page will come up. Go through the tabs to get to the one on Wireless and Security. Don't worry about opening pages. It usually needs a specific action to save any change.
8. You will need to set up probably the country of use,an SSID (station name) maybe stuff about the channel to use. The router will most likely pick suitable defaults for Canada etc if you bought it at home.
There is little good from not setting a station name or hiding it. Getting that is childs play for a Hacker. Not much use either restricting access to specific hardware (specified by the MAC codes of the device cards)
9. Choose to set up an 'Infrastructure 'network. That is one with security. Choose to set up WPA2 personal encryption. WEP is to easy to break. 'Enterprise' security needs a dedicated password server.
10. Now the passwording. The device both uses this as a password proper and then as an encryption key for the traffic. Some routers have a so called easy push button way of setting a password, WPS. My simple mind prefers the direct route After establishing the form of th security pick a passphrase to enter in the WPA2 passphrase box. I use a piece of poetry, stripped of all punctuation and spaces. Can contain non alphanumeric characters. Bfore entering it, write it down. Draw several parallel lines on paper then cut them with verticals number the boxes from 1 to 63. Then enter the passphrase to total 62 characters. More it wont work. Less is less secure. You can pad the end or start if your poetry does not quite fit.
11. At the completion of the page click to save it.
12. Now set the passphrase into the wireless sets on the computers. How will depend upon the OS used by the computer. Read the help.

HT4910 I don't know how to back up my files into the cloud

I am signed into the cloud but I can't figure out how to back up my files

Welcome to the Apple Community.
You can't use iCloud to back up files on your computer..

I am using iCal 8.0 and I don't know how to include event times along side the event in the monthly view. help. :)

I am using iCal Version 8.0 (2026)
I have read through responses to a similar question as I am posing, but the recommendations that I've found don't seem to be in the iCal preferences/ general tab.
Two great solutions that don't seem to be in my preferences winder are:
1. A respondent recommended checking the box 'show event times' on the general/ preferences tab, but that box does not appear in my window
2. A second response i found recommended that 'I check box for 'Show time in Month view.' in Under General/ preferences, but that option is not appear either.
Any other thoughts please

The grouped yellow pages are a Section (Chapter).
If you have logical divisions within your documents that fall on page boundaries, do the sensible thing and actually divide them with:
Menu > Insert > Section Break
…where you want the separation. Both before and after.
Moving or removing individual pages is like ripping pages out of a book and/or reshuffling them. It makes sense to relocate or remove entire sections, which are pages connected by their content, but not the individual pages within those that have continuing text both before and after them.
Peter

I cannot open Adobe Acrobat Pro. There is a pink "X" on the Uninstaller. I don't know how to cancel UNINSTALL, if that is the problem.

I am using a MacBook Pro OS X 10.9.5

For general browsing on an older powerPC Mac, you'd need to get a supported browser, one that sees current or recent updates for security reasons; so that is one thing. You could get and install anything from the internet.
But you probably do not have a virus.
tech guides
http://www.thesafemac.com/tech-guides/
adware removal guide
http://www.thesafemac.com/arg/
A good browser for a powerPC computer running up to 10.5.8, is TenFourFox. Or iCab. Or SeaMonkeyPPC. With some of these you can set up an email account, & those may be more secure than older Mac Mail. You can also be sure the settings in a browser or email client application do not automatically open attachments or downloads, until you determine what they are through investigation.
If you got an idea to download free applications from untrustworthy sites, or wanted to clean up your mac, etc using some dubious software, then an 'adware' may be installed. Some kinds of items you may seek to download or that were attachments on an email, can be dealt with in several ways. Safe browsing, near paranoid use of email, and if you use a web-based email, use a secure browser to visit it, login online, and do not have unnecessary cookies or features set in the browser.
What OS X version does your PowerBook have running?
What are you using for a web browser? Safari is unsupported.
Good luck & happy computing!

I recently bought my 1st iPhone. It is a 2nd hand iPhone 3Gs. I have inserted the Sim card from my BlackBerry Storm 9500, but I don't know how to access my Contact List on the Sim card. I would greatly appreciate some guidance / advice please?

I recently bought my 1st iPhone. It is a 2nd hand iPhone 3Gs 16gb. I use Vodafone. The iPhone Version is 4.3.5 (8L1), Model is MC131B,
I have inserted my Sim card from my BlackBerry Storm 9500, but I cannot seem to find a way to access my Contact List the Sim card.
Also, I have synced my iPhone with iTunes on my MacBook, but my music doesn't show up at all on my iPhone. Any suggestions please?
I would greatly appreciate some guidance / advice please? Many thanks in anticipation...

You can import the contacts from SIM.
It is covered in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen.

Don't know how to setup a simple VLAN on the RVS4000

Similar Messages

Maybe you are looking for