Don't know how to show different scene graph

I need your help.
That's what i want to do :
I have two scenegraph which need to be in a same virtual universe (sharedGroup).
I want to show one scenegraph in a Canvas3D and the other scenegraph in another Canvas3D.
when i try to do something, both scenegraphs appairs in both Canvas3D.
Please helpe me !!!

So are you saying that there is not a little picture of the album on the left side of the name of the song?
If it is not there then maybe you don't actually have the album art.
If you want album art for your songs then I suggest using the program which is a widget.
Here's the link if you want to take a look at what I am talking about:
http://www.apple.com/downloads/dashboard/music/amazonalbumart.html
You just type in the name of the album and then it will show up and then you just click apply to iTunes.
Hope this helps!
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.
Macbook   Mac OS X (10.4.8)   MacBook

Similar Messages

  • My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..

    My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
    So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
    I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
    Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
    I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
    Kind Regards

    iTunes 11
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions.

  • I forgot my iPad passcode, it has a different apple id than my laptop and I don't know how to restore it.

    I forgot my iPad passcode, it has a different apple id than my laptop and I don't know how to restore it. i don't want to lose my pictures.

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I recently downloaded Ios 7 and all the songs that i have purchased before but deleted off my itunes because i didn't want them showed up. I don't know how to delete them off my ipod and i really don't want them there

    I recently downloaded Ios 7 and all the songs that i have purchased before, but deleted off my itunes because i didn't want them, showed up. I don't know how to delete them off my ipod and i really don't want them there. Is there a way to get them off? The songs dont show up in my itunes on my computer, just on my ipod with a download button next to them. I don't want them there anymore because i don't like that kind of music anymore and i don't know how to get them to go away.

    There is a similar setting for Videos on that Settings screen, so if you leave that 'on' you may have similar happening in the Videos app

  • I have the new iPad . I don't know how my sister's apple ID was set. I have all under my iTunes account but when i need to update my apps, a different apple ID come up! how do i change that?

    I have the new iPad . I don't know how my sister's apple ID was set. I have all under my iTunes account but when i need to update my apps, a different apple ID come up! how do i change that?

    Hi maggieanntb, your sister's Apple ID came up because an app(s) was downloaded using her account. To prevent that from happening, you would have to delete the app(s) that were downloaded on her's, and re-download them using your own Apple ID.

  • HT1178 My Time Capsule is only blinking amber. My computer tried to backup but I don't know how to tell if it did in fact back up the data. How can I tell if it backed up and why doesn't the light show green?

    Just purchased a Time Capsule. Had to call Comcast to disable the WIFI and have internet connection. The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it. After connecting, my computer tried doing a backup for the first time and it appeared that it was backing up and finished although I don't know how to check to make sure that it did backup. How do I check and shouldn't the light on the time capsule be blinking green and the airport utility show green?

    TM will show it has done a backup.. Look at the info.. when was the backup completed??
    If you want more details install the widget.
    A1 here.
    http://pondini.org/TM/Troubleshooting.html
    The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
    There is an error.. probably trivial.. firmware update, default password..
    Open the airport utility and find out what the error is.
    Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
    Here is additional TC.. it is blinking amber with faults.
    Click the fault. eg default password.
    You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
    I ignored my errors and now it is green..

  • In updating my iPod to 6.1.2, I received an error during the update.  Now, ipod is not rebooting.  Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture.  I don't know how to reset so that I can restore my backup

    In updating my iPod to 6.1.2, I received an error during the update.  Now, my ipod is not rebooting.  It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture.  I don't know how to reset so that I can restore from my backup.
    A similar thing happened when I updated the ios on my ipad.  But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

    i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

    Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
    Power down the system and restart with the drive connected, go to DU and see it it is seen.

  • HT204053 I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and

    I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?

    Heya Katie!!
    So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
    But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
    When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
    Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
    And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!!

  • Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

    Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

    Thank you again for all of your help!! I really appreciate it!
    I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
    Thank you for letting me know about my contacts! How do I know if I have the contacts app?
    Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
    How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
    Sync Contacts:
    Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
    Sync Calendars:
    Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

  • I have an ipod classic 6th generation which has a 160gb MK1626GCB HDD in it. This drive has failed so I bought a new one. I don't know how I've managed it but I've ended up with a 160gb MK1634GAL. Can I just get a different ribbon so it fits?

    Hello I hope somebody can help. I have an ipod classic 6th generation which has a 160gb MK1626GCB HDD in it. This drive has failed so I bought a new one. I don't know how I've managed it but I've ended up with a 160gb MK1634GAL. The connectors on the hdds are different on the hdd end but look the same on the mb end. Can I just get a different ribbon so it fits? Ive looked for one and have found a couple of different ones and the seem to be specific to the ipod although I cannot find one specific for the 160g. Can anyone shed some light onto this?

    Your computer is called an iMac.
    Did you turn proxies on?  If so, you should turn them off.

  • Screen just froze up in middle of netflix show...has the image on screen.  Don't know how to get rid of it,start over.

    screen just froze up in middle of netflix show...has the image on screen.  Don't know how to get rid of it,start over.

    I was able to reboot...thank goodness..because this morning the screen was still frozen on the Netflix movie...full screen and no options to do anything.  So the first option was not going to work for me.
    By the time I got to work the dead battery was showing...even though it had been plugged in all night...
    So then I looked at the Apple website to make sure I knew which was the Sleep key...and then did the reset and it worked.  It's at 2% right now and I assume it's charging....I cleared out the Safari cache and closed it up.
    Option 2, the reboot with Sleep and Home buttons worked...once I held them long enough!
    Many, many thanks.
    Carole

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • Hi:  When I open my iPhoto the popup shows up and I don't know how to correct it.  Here is the popup "The current screen resolution is not optimal for iPhoto?" Can you help

    When I open my iPhoto a popup shows up and I don't know how to correct it the popup:
    "The current screen resoulation is not optimal for iPhotp"?
    Can you help?

    Go to the System/Accesability preference pane and enable the Zoom capability either with keystrokes or Magic Mouse:
    See if that will work for you.
    OT

  • How do I turn on the notification for pop-up blocker? I accidentally clicked the option saying "do not show this notification again." I want the notification so I have the option of seeing the pop-up or not, but don't know how to turn this back on.

    How do I turn on the notification for pop-up blocker? I accidentally clicked the option saying "do not show this notification again." I want the notification so I have the option of seeing the pop-up or not, but don't know how to turn this back on.

    Type "about:config" in the location bar.
    Filter for "privacy.popups.showBrowserMessage"
    Change this to true by double clicking the preference (or right click and choose Reset)

Maybe you are looking for

  • Employee Interaction Center

    Dear Colleagues, In Customer Interaction Center (CIC), search is possible based on Customer(Activity Partner). But in general Scenario, in Mobile Sales, Sales Representative will assigne some activity to Person Responsible (CIC agent). Now CIC agent

  • Can't Click Flash Display Settings on Mac

    Hello All, I need to Disable Hardware Acceleration in the Display Settings Dialog.  I right click, choose settings, but I cannot click anything.  Any Ideas? I have checked out the the thread on "Unable to click in flash player settings box" but nothi

  • Duplicate e-mails

    Hi All, I am getting one strange problem. I am using javamail to send some notification to all of my applicatio users. But I don't know some of the users are getting 200-250 copies of same e-mail and I am not able to find out what could be the reason

  • Paging record with sql server

    i'd like to paging my web with jsp and my database is sql server. as far as i know, to paging record in jsp are use 'LIMIT' but sql server does not support that. this syntax is only for MySQL. How to paging record but with sql server as database...pl

  • Not able to connect to My SQL from CIM in ATG 10.2

    Hi, I have installed ATG10.2 and trying to configure MySQL database with cim. I have given all the details as per the documentation. After creating the database connection for production_core, i have tried to test the connection but it says that   >>