Don´t RAWS, which are saved as smartobjects get saved automaticly?

Hi, now in english:
I´m working with CS4 on a mac.
I have a problem: I´m using several CR2-files composed as smart objects in one big psb-file.
After getting along for such a while with that technique I get the Error
photoshop smart object parseThe original Smartobject could not been edited because no parser or file format could open the file' (my translation)
I´m afraid of losing all which I worked on the files...
Some days ago I deleted the cache of Camera Raw, is this a possible problem?
Because sometimes while using CR PS shut down...
Do I have to save these files?
Help!!!
Thank you

Hi Jason,
I have tested in my lab, and got same result with you. below is my test and results.
1. log on with user1>> click "IE" and select "Run as different user">> type user2's credential >>change proxy, click "OK". open "internet option" again, the change was not saved.
2. log on with user2, check proxy in IE, the change was not saved.
Then I tested on "Home Page", zone settings, , I found the changes can be saved.
I have done further test on other applications, such as notepad (enable/disable status base), calculator (View >> standard/scientific/programmer/statistics), the change can be save from "Run as different user".
since this is a behavior of IE, I suggest you submit a post in IE forum and IE experts may give you explanation on that.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • How can I delete old movies that I already purchased, which are saved in my account? Actually I don't want them to be viewed by others who use same account, so is there any solution to delete them? Please advise. Thank you

    How can I delete old movies that I already purchased, which are saved in my account? Actually I don’t want them to be viewed by others who use same account, so is there any solution to delete them? Please advise.

    Delete Purchases = No.
    But there is this...Hiding and unhiding purchases
    iTunes Store  >   http://support.apple.com/kb/HT4919

  • Apple TV doesn't show photos which are saved on the Apple TV

    I have copied all my iPhoto library to my apple tv and have been using it for a while. Now my Apple TV won't sync because of the a supposed Firewall issue. I have no firewall set up. My Apple TV shows that I have no photos in the library but iTunes shows there are 55 GB of photos. This is very frustrating. Sometimes it shows the photos just fine but won't let me stream my movies or TV shows. Now I can stream those which are not saved on my apple tv but I can't see the photos which are.
    Any Ideas? What is the deal with the Firewall issues? This is happening once a week but the other times it works great.
    Please help!

    Changing your wifi channel is merely a suggestion at this stage, but it's certainly worth giving it a try.
    What you are trying to do is find a channel that is free from interference, which usually involves finding a channel that no one around you is using, so it really could be any that's best, you might have to try a few. You are probably best avoiding channel 11 which many routers seem to have as a factory setting.
    Other types of interference such as that from microwaves and cordless phones can interfere with multiple channels.
    Depending on where you are you may not be able to use certain channels such as 12 & 13 in the US.
    You should not need to adjust any other devices.

  • Does ACR save JPEG & TIFF files like RAW files are saved?

    I know ACR saves RAW file edits to side-car files, not permanently changing the original file. Does ACR do the same for JPEG and TIFF files when they are opened, edited and saved? Thanks.

    I wonder if Kelby could have been confused by the fact that the metadata describing the Camera Raw settings is being stored back into the JPEG file.  The key is that the JPEG file is indeed re-written, but the actual image data is not changed.
    Here's an experiment you can try for yourself:
    1.  Start Photoshop, and choose File - Open As...
    2.  Change the type to Camera Raw, and choose a JPEG file that you have on your disk, and press [Open].
    3.  When Camera Raw comes up, push the Exposure control all the way to -4.00 EV and press [Open Image].
    4.  Note that it's very dark, as expected.
    5.  Close the document, do not save.
    6.  Note that the JPEG file has been updated on your disk by seeing that its date and time are current.
    7.  Choose File - Open As... again and open the same JPEG file.
    8.  Note that the Exposure control is set again to -4.00 EV and the preview is very dark.
    9.  [Cancel] the Camera Raw dialog.
    10.  Open the same JPEG file from Windows Explorer using the Windows Photo Viewer.  Note that it is NOT dark.  The original JPEG data is still intact, as bright as it ever was.
    -Noel

  • How to automatically name files which are saved using " Write to spreadsheet" individually?

    I'm making a program which will save image data (i.e pixel intensity) and the save the data to a text file. Works great but I need it to automatically name each textfile as I will be taking n number of image date in a certain amount of time and don't want to waste time writing each file name.
    Any tips would be hugely appreciated,
    Shack

    Hi Shack,
    you need to create your filename programmatically. As they are just strings you should use string functions to do so!
    Then use "Append Path" to create a full filepath wired to your file function…
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Convert old photos which are saved in PSD

    I have a lot of old photos on a disc.  they are on an icon of a camera and PSD in blue on top. how do i open them.  I found out that PSD means photoshop

    I'd suggest downloading a trial of Photoshop and use that to convert your files into a more universally compatible format like TIFF or JPEG. You can do this in bulk using the Image Processor available under File > Scripts.

  • How to open the forms in Form 9i which are saved and compiled in Forms 10g?

    Dear all,
    i have froms created with form 10g. now i want to open it in form 9i it gives the following error:
    FRM-30085 : Unable to adjust form for output.
    can i open it in form 9i?
    Regards:
    Muhammad Nadeem
    [email protected]

    you can't downgrade forms through different versions. Never ever do that. It's not supported.

  • Everytime when I quit FCP X, I could not find the file that was created previously. I'm aware files (events/projects) are saved automatically. But strangely when I reopen FCP, the event/projects are not listed.

    I need help here. Saved events/projects are not visible or listed when I reopen FCP X. Tried to open from the event folder don't seem to work.
    I'm using MacOS X 10.6.8 and just bought FCP X 10.1.
    Help.

    No. I'm not using two hard drives. Files saved on MacBook Pro HDD. Only time I use the second HD is for backup but while working on FCP X.
    This is unclear.
    Do you have another HD with FCP X projects and / or events?
    If you do (whether it's a backup or not) it will cause the exact problem you described. Make sure any other drives with FCP X events or projects are turned off before you launch FCP X.
    If you don't have a second drive with events or projects, I suggest you try trashing your preferences.
    Faults like this can sometimes be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
    Download Digital Rebellion's Preference Manager (free, simple to use, and quite safe).
    http://www.digitalrebellion.com/prefman/
    With Pref Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
    If you trash them and don't restore them, you will need to go over your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
    muhammadfromsingapore wrote:
    Thks Bob. No. I'm not using two hard drives. Files saved on MacBook Pro HDD. Only time I use the second HD is for backup but while working on FCP X. I'm getting very frustrated whenever I return to work on the video to find the file 'missing'. I know its there but it's just not showing up on the Event Browser. Sigh!!
    How come you marked your own post as "Correct Answer" when all it does is tell Bob he's wrong? This will mislead people.
    Andy

  • I need to upgrade but don't know which version I have to get.  Do I have to go through each lower version or can I go straight to 10.8 then get free MAverick upgrade?  I live FAR from Apple store, so download upgrade is preferred.  :)

    Need a newer version of Os to run printer and software.  Confused if I need to get which version to be able to upgrade to MAverick for free.  Also, need something I can download since Apple store is far away. 

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    (NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X. For detailed information see this user tip:  https://discussions.apple.com/docs/DOC-6271 )
    The OS 10.6 Snow Leopard install DVD is still available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Before installation you should back up all your data.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • Don't know which version of Photoshop to get, I need the oil paint filter.

    I'm a new designer and on class I did some really cool stuff with the oils paint filter and I LOVE IT, it will be a great part of the style I want to develop but I'm on a CC trial and it is not there! I've done my homework and have found out that apparently the latest version of CC has eliminated the beautiful filter! Go figure!
    I want this filter BADLY, so what are my best options?
    Adobe has so many products and versions that I'm really confused about what to get.
    So should I get CS6? Or is there an older version of CC that has the oil paint filter?
    I also saw somewhere there's an oil paint filter or plug in the CC but only for windows and I'm on a Mac.
    Please advice

    Here is a direct link
    http://prodesigntools.com/adobe-cc-direct-download-links.html
    but follow the very important instructions to the letter!

  • It seems that photos are saved automatically after one makes changes.  However, I cannot find the edited photograph!  Where do they end up?

    After I change the photo on IPhoto, only the original appears - don't know where to find the changed photo.  Is it really automatic?
    Thank you!
    <E-mail Edited by Host>

    How are you editing the photo?  With iPhoto or a 3rd party editor?
    With iPhoto the edited version replaces the orignal in both the thumbnail and large version.  Once the photo is edited you can view both the editied version and original in the edit mode by depressing the Shift key to toggle between the two.
    This is what you get when you try it:
    Post back with what you use to edit.
    OT

  • Some of my newly saved contacts get deleted automatically... And specialised ringtones for my contacts are reset to default.. It happens quite often..

    Its been not even a month since i bought my new iPhone 5...
    Some of my newly saved contacts are automatically deleted..
    Contact photos that are saved automatically get deleted...
    Specialised ringtones for some of my contacts are reset to default sometimes without any warning...
    It happens quite often
    I find it irksome...
    Can anyone help me out

    Its been not even a month since i bought my new iPhone 5...
    Some of my newly saved contacts are automatically deleted..
    Contact photos that are saved automatically get deleted...
    Specialised ringtones for some of my contacts are reset to default sometimes without any warning...
    It happens quite often
    I find it irksome...
    Can anyone help me out

  • Why are 'saved as' .psd files so much bigger than original raw nef files?

    I was under the impression that original raw files were the biggest possible. I appear to be very wrong. Why are 'saved as' .psd files so much bigger than original raw nef files?
    I'm beginning to think that saving them as psd is a bad idea.
    Yes, though I've heard all the arguments of keepng the original raw files (For ex. Did you throw away the negatives when you were using film) I se eno purpose in keeping them. Once I've made the initial adjustments--cropping, color correction etc. I don't feel a need to ever go back and never do. Most of my work is done in Photoshop and I like it that way--but suddenly finding myself with such huge files doesn't appeal to me at all--and other formats like tif...well never mind for now.

    Good point made c.pfaffenbichler however, my thinking is this--there is time spent on the raw file and then there is much more time spent on (usually a psd) the file once in Photoshop. For me to then go back to the orignal raw file, after having worked on it on PS would mean getting rid of all the work (larger amount of work, time wise and artistic wise) done on PS which seems pointless. Although the psd file does show your layers and stuff it only shows the end results of that layer. It does not show from where to where you pointed your brush, from what point to what point you changed the color or part of an image etc. etc.Anyhow I understand why most people keep their raw files, but this is the main reason why I do not. It would mean hours of work on an image you already worked on (and usually were satisfied with) to perhaps make some minor alteration. Also please note that though I was noce a pro photog, no I do it mostly for fun. Getting the exact red in my Coca Cola can has never been of importance. On the other hand, if there were a way of working on a raw file within Photoshop and keep it (save it as) a raw file equivalent, then I would absolutely do so.

  • Hi, all transactions codes are saved in which table?some transaction codes?

    hi,
    all transactions codes are saved in which table?i want some transaction codes?

    All transaction codes are stored in table TSTC. Their texts are displayed in TSTCT.
    Here are some T-CODE's..
    OSS1      SAP Online Service System
    OY19      Compare Tables
    S001      ABAP Development Workbench
    S002      System Administration.
    SA38      Execute a program.
    SCAT      Computer Aided Test Tool
    SCU0      Compare Tables
    SE01      Old Transport & Corrections screen
    SE09      Workbench Organizer
    SE10      Customizing Organizer
    SE10      Customizing organizer – requests for user (To release for transport – enter user name, press Enter. Select changed object and select ReleaseSE10 New Transport & Correction screen
    SE11      ABAP/4 Dictionary Maintenance SE12 ABAP/4 Dictionary Display SE13 Maintain Technical Settings (Tables)
    SE11      ABAP/4 Dictionary.
    SE12      Dictionary: Initial Screen – enter object name
    SE13      Access tables in ABAP/4 Dictionary.
    SE14      ABAP/4 Dictionary: Database Utility.
    SE14      Utilities for Dictionary Tables
    SE15      ABAP/4 Repository Information System
    SE15      ABAP/4 Repository Information System.
    SE16      Data Browser
    SE16      Data Browser: Initial Screen.
    SE16      Display table contents
    SE17      General Table Display
    SE30      ABAP/4 Runtime Analysis
    SE30      ABAP/4 Runtime Analysis: Initial Screen.
    SE30      Run Time Analysis (press Tips and Tricks button for good stuff)
    SE32      ABAP/4 Text Element Maintenance
    SE35      ABAP/4 Dialog Modules
    SE36      ABAP/4: Logical Databases
    SE37      ABAP/4 Function Library.
    SE37      ABAP/4 Function Modules
    SE38      ABAP Editor
    SE38      ABAP/4 Editor.
    SE38      ABAP/4 Program Development
    SE39      Splitscreen Editor: Program Compare
    SE41      Menu Painter
    SE43      Maintain Area Menu
    SE51      Screen Painter
    SE51      Screen Painter: Initial Screen.
    SE54      Generate View Maintenance Module
    SE61      R/3 Documentation
    SE62      Industry utilities
    SE63      Translate Short/Long Text.
    SE63      Translation
    SE64      Terminology
    SE65      R/3 documents. Short text statistics SE66 R/3 Documentation Statistics (Test!)
    SE68      Translation Administration
    SE71      SAPscript layout set
    SE71      SAPscript Layouts Create/Change
    SE72      SAPscript styles
    SE73      SAPscript font maintenance (revised)
    SE74      SAPscript format conversion
    SE75      SAPscript Settings
    SE76      SAPscript Translation Layout Sets
    SE77      SAPscript Translation Styles
    SE80      ABAP/4 Development Workbench
    SE80      Repository Browser: Initial Screen.
    SE81      SAP Application Hierarchy
    SE82      Customer Application Hierarchy
    SE84      ABAP/4 Repository Information System
    SE85      ABAP/4 Dictionary Information System
    SE86      ABAP/4 Repository Information System
    SE87      Data Modeler Information System
    SE88      Development Coordination Info System
    SE91      Maintain Messages
    SE92      Maintain system log messages
    SE93      Maintain Transaction Codes
    SE93      Maintain Transaction.
    SEU      Object Browser
    SHD0      Transaction variant maintenance
    SM04      Overview of Users (cancel/delete sessions)
    SM04      Overview of Users.
    SM12      Deletion of lock entries (in the event you have you are locked out).
    SM12      Lock table entries (unlock locked tables)
    SM21      View the system log, very useful when you get a short dump. Provides much more info than short dump
    SM30      Maintain Table Views.
    SM31      Table Maintenance
    SM32      Table maintenance
    SM35      View Batch Input Sessions
    SM37      View background jobs
    SM50      Process Overview.
    SM51      Delete jobs from system (BDC)
    SM62      Display/Maintain events in SAP, also use function BP_EVENT_RAISE
    SMEN      Display the menu path to get to a transaction
    SMOD/CMOD      Transactions for processing/editing/activating new customer enhancements.
    SNRO      Object browser for number range maintenance.
    SPRO      Start SAP IMG (Implementation Guide).
    SQ00      ABAP/4 Query: Start Queries
    SQ01      ABAP/4 Query: Maintain Queries
    SQ02      ABAP/4 Query: Maintain Funct. Areas
    SQ03      ABAP/4 Query: Maintain User Groups
    SQ07      ABAP/4 Query: Language Comparison
    ST05      Trace SQL Database Requests.
    SU53      Display Authorization Values for User.
    Human Resources
    PA03      Change Payroll control record
    PA20      Display PA Infotypes
    PA30      Create/Change PA Infotypes
    PP02      Quick Entry for PD object creation
    PU00      Delete PA infotypes for an employee. Will not be able to delete an infotype if there is cluster data assigned to the employee.
    Sales and Distribution (SD)
    OLSD      Config for SD. Use Tools-Data Transfer-Conditions to setup SAP supplied BDC to load pricing data
    VA01      Create Sales/Returns Order Initial Screen
    VB21      Transaction for Volume Lease Purchases (done as a sales deal)
    VK15      Transaction used to enter multiple sales conditions (most will be entered here)
    VL02      Deliveries
    SAP Office
    SO00      send a note through SAP, can be sent to Internet, X400, etc
    Financial Accounting (FI)
    FGRP      Report Writer screen
    FM12      View blocked documents by user
    FST2      Insert language specific name for G/L account.
    FST3      Display G/L account name.
    KEA0      Maintain operating concern.
    KEKE      Activate CO-PA.
    KEKK      Assign operating concern.
    KL04      Delete activity type.
    KS04      Delete a cost centre.
    KSH2      Change cost centre group – delete.
    OBR2      Deletion program for customers, vendors, G/L accounts.
    OKC5      Cost element/cost element group deletion.
    OKE1      Delete transaction data.
    OKE2      Delete a profit centre.
    OKI1      Determine Activity Number: Activity Types (Assignment of material number/service to activity type)
    OMZ1      Definition of partner roles.
    OMZ2      Language dependent key reassignment for partner roles.
    Material Management (MM)
    MM06      Flag material for deletion.
    OLMS      materials management configuration menu, most of the stuff under this menu is not under the implementation guide
    MM configuration transactions
    OLMB      Inventory management/Physical Inventory
    OLMD      MM Consumption-Based Planning
    OLME      MM Purchasing
    OLML      Warehouse Management
    OLMR      Invoice Verification
    OLMS      Material Master data
    OLMW      MM Valuation/Account Assignment
    Configuration related
    OLE      OLE demo transaction
    OLI0      C Plant Maintenance Master Data
    OLI1      Set Up INVCO for Material Movements
    OLI8      Set Up SIS for Deliveries
    OLIA      C Maintenance Processing
    OLIP      C Plant Maintenance Planning
    OLIQ      New set-up of QM info system
    OLIX      Set Up Copying/Deleting of Versions
    OLIY      Set Up Deletion of SIS/Inter.Storage
    OLIZ      Stat Set Up INVCO: Invoice Verify
    OLM2      Customizing: Volume-Based Rebates
    OLMB      C RM-MAT Inventory Management Menu
    OLMD      C RM-MAT MRP Menu
    OLME      C MM Menu: Purchasing
    OLML      C MM Menu for Warehouse Management
    OLMR      C RM-MAT Menu: Invoice Verification
    OLMS      C RM-MAT Master Data Menu
    OLMW      C RM-MAT Valuation/Acct. Asset. Menu
    OLPA      SOP Configuration
    OLPE      Sales order value
    OLPF      SPRO Start SAP IMG (Implementation Guide).
    OLPK      Customizing for capacity planning
    OLPR      Project System Options
    OLPS      Customizing Basic Data
    OLPV      Customizing: Std. Value Calculation
    OLQB      C QM QM in Procurement
    OLQI      Analysis OLVD C SD Shipping Menu
    OLVF      C SD Billing Menu
    OLQM      Customizing QM Quality Notifications
    OLQS      C QM Menu Basic Data
    OLQW      C QM Inspection Management
    OLQZ      Quality Certificates
    OLS1      Customizing for Rebates
    OLSD      Customizing: SD
    OLVA      C SD Sales Menu           
    OLVS      C SD Menu for Master Data
    Regards,
    Pavan

  • Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I inste

    Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I instead just keep everything on my ipod and then if I have to get a new computer or something just download all my songs from the ipod to my new computer's itunes? Will that work? Will I still be able to keep all my songs that way?

    I'm going to assume the consolidating files does not work due to hard drive space limitations.
    Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility?  That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
    Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
    Also, using the Apple article on moving the library, take a slight twist on what it says.  Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
    The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation.

Maybe you are looking for