Don't receive group chats for a while and then all at once?

So I have an iPhone 6, and I've been having this problem with group texts for maybe about a month?
I used to get group texts when they were sent, but recently I wont get any for a couple days, and then suddenly my phone will ring nonstop for like a minute and I'll receive them all at once. The time stamps are all the original times - when I finally do receive a message it will still say "Tuesday, 8:04 AM" or "Today 10:59 AM" even if it's Friday at 9PM. I've tried restarting it, does nothing. I also have the latest update.
As far as I know this doesn't happen with iMessage - but all of my group texts have at least 1 person who has an android.
Anyone know how to fix this?
Thanks!

What carrier are you on? I have ATT and spent hours with them yesterday looking for a fix. No luck. They suggested I go to Apple. I have another friend on ATT with the same problem.

Similar Messages

HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

I have a factory unlocked 4s I'm haveing trouble with the mms withI have a straight talk I'm useing the sim card swap with tmoblil sim card I'm following the insructions but it works for a while and then its gone. I've set the settings at least ten times

I have a factory unlocked 4s I'm having trouble with the mms with straight talk I've been useing the sim swap system with tmobile i have put the settings in five times. The setting won't stay it works for a while and then it's gone. I'm not in a good coverage area but when i put the settings in i make sure i'm getting a good signal or near wifi. any suggestions would be great.

Congrats on your recent upgrade actionkatie! I am sorry to learn of the difficulties you are experiencing with your Samsung Galaxy S4. Let's get to the bottom of this because we want you to love your phone.
I understand you have done all necessary troubleshooting steps that should have enabled you to send messages to iPhone users without them having to disable iMessage. Have you tried contacting Apple Support regarding the inability to send a text message to iPhone users? Apple can be reached at (800) 275-2273.
In addition, do you get a certain error message when your WiFi stops working? Have you verifed that Auto Switch network is disabled? To disable this setting simply to go Settings > Wi-Fi > Tap the Menu Key(to the left of the home button) > Select Advanced and it is called `Auto network switch. If you are still experiencing difficulties, please feel free to reach out to us for further assistance.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

I am a new mac user and have a 15 macbook pro (non retina display). I am having an issue with safari "freezing" ...it will work fine for a while and then I will open a new tab and attempt a website that won't load and after that it seems no website will.

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

Basic troubleshooting techniques for any problem
Restart the computer = joy?
Reset the router = joy?
Restart the computer in Safe Mode = joy?
ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
ÇÇÇ

Something going seriously wrong with my install of CC. The CC desktop app won't show what apps I have, and when I select that tab the wheel spins for a while and then the app quits. I am running Yosemite 10.

Something is seriously wrong with my install of CC desktop. The icon won't show up in the upper bar as it always has. When I start it from th finer it starts, but when I select the Apps tab is spins for a while and then quits. Tried re-installing it from Adobe downloads. Same behaviour. What's up?

Rdgates55 have you utilized the solutions listed in App doesn't open | Progress wheel spins continually? If so what version of the Creative Cloud Desktop application are you using?

HT4352 my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary

my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary from where it should show my playlist any sugestion. it was wifif thoufgt it might be that so i tried ethernet wired and does the same any suggestions my connection is up when it shuts down

Did you restore to factory defaults/new iPod and sync stuff to your iPod? If you restore from backup there may be some corruption that is now in the backup.

New W530 Owner - Can I move down to W7 for a while and then come back?

I have a full Windows 7 license and think I would prefer to move down to Windows 7 for a while and have the option to come back to 8 later. My understanding is that 8's key is in the bios.
If I move down to W7 will it install normally?
If I later want to move back to W8 can I install that from any Win 8 Pro install media and it will just recognize the key at that time?
Thanks!

http://www.howtogeek.com/133168/how-to-downgrade-windows-8-pro-to-windows-7/
http://www.infoworld.com/t/microsoft-windows/how-downgrade-windows-7-210685
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674

HT3964 My MacBook Pro i5 Dual Core has a hardtime waking up when the computer is put to sleep and only when it goes to sleep and has been asleep for a while. The indicator light flashes on and off for a while and then freezes. I've done an SMC reset once.

Does any one have the same problem with their MacBook Pro i5 Intel Dual Core? If the computer goes to sleep (not the screen) and is asleep for a while, when I try to wake it up it doesn't respond. I have to power it downn and restart it and sometimes it takes two or three attempts. Otherwise it works fine. I upgraded the memory to 8 GB. That is the only alteration doen to it. I've performed one SMC restart and now it wakes up but it takes a while and a gray screen shows up. When I insert a DVD it won't start automatically I have to start the application in order to see it. Any suggestions?

http://www.apple.com/support/macbookpro-videoissues/

Hi, been charged the CC for twice and don't receive any email for order number and serial number, kindly please advise

hi, i been purchased for creative suite . but adobe have been double charged for the item and i still cannot install the upgraded version of creative suite..
kindly please advise

Hi Dexter Choo,
We have checked the details for your account, unfortunately, we were unable to find any active subscription on this email.
Kindly provide the below mentioned email in the [Private Message] so that we can assist you appropriately.
Alternate Email Address:
Last for digits of your Credit card:
Date on which the charge was posted:
Exact amount:
As the information that we need is critical so make sure you send this via [Private Message] only.
Thanks,
Atul Saini

Is there a new virus that affects Firefox? My browser is fine for a while and then the text will disappear, also some of the control buttons.

This has been going on at least 3 months with the browser. The back arrow will disappear, sometimes the text completely disappears, sometimes you can see it but its unreadable, looks like the letters are missing pixels. Sometimes the images get corrupted with black pixelation. If you quit and restart it goes away, for a while.
The problem seems to be affecting my online games as well. I play "Steampunk Tower" on Yahoo!'s free game tab and it always crashes my machine hard, as in abruptly shuts down the system with no warning. This is not the only game to be affected.
I have both McAfee and Norton 360 and they find nothing when I scan, but they can only detect what they know about so I'm looking for something new and unreported. Or maybe an update failed or has corrupted a file, I don't know. I do know that its very irritating and I'd like to fix it, if possible.

hello, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in ''firefox > options > advanced > general''.

Why do some youtube videos run for a while and then freeze in firefox

HI i am having a problem with the lasted firefox browser. You see when I go to this website to watch a video witch is through youtubthe video will play for a little bit and then it will freeze but the audio of the video will keep playing but the video will still be frozen. I have went into firefox and I did go into tools and under privacy where it says clear recent history and I did put a check mark into clear catche, cookies, website preferences and push on the continue button. Then I went back to the website and again I did try and watch the youtube video with the same problem as described above. So then I did uninstall Adobe flash player and shockwave player and re downloaded both flash player and shockwave player and reinstalled them again. This changed nothing the youtube video keeps freezing and the audio keeps plays even when the video is frozen in firefox.
edit: I was wondering can your antivirus cause videos from youtube to freeze.
Help would be appreciated please.
some info that might be helpful
Firefox 36.0
Windows 8.1 64 bit operating system
Avast free 2015.10.0.2208

Hello,
Try these tool that may help solve your problem. Sometimes Video loads slowly depending on your network speed subscription from your network provider.
The Refresh feature (called "Reset" in older Firefox versions) can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' When you use this feature, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Refresh Firefox - reset add-ons and settings]] article for more information.
To Refresh Firefox:
# Open the Troubleshooting Information page using one of these methods:
#*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Refresh Firefox" ("Reset Firefox" in older Firefox versions). Click on it.
#Firefox will close. After the refresh process is completed, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!
Thank you.

Airport Express that works for I while and then quits

I have an airport express that I connect with an Ethernet wire to my wifi network base station to be able to extend the wifi to other areas of the house. It used to work perfectly and I had the green light on it for days and days on, in fact it never quit it could be on for weeks.
Now it works for a while, an hour or so, and then the light goes out completely (no orange light, just no light) and there is no longer any wifi communication. Is the Airport broken or could it have something to do with the originating wifi provider base station which is in fact hardwired to the the Express?

Now it works for a while, an hour or so, and then the light goes out completely (no orange light, just no light) and there is no longer any wifi communication.
Unfortunately, this is a sign that you are likely going to need to replace this Express.
Here is what I think is happening based on experience with these devices:
The internal components on the Express heat up significantly and after an hour or so, the heat build up is causing a weak electronic component to change in value, or heat expansion is causing a loss of an electrical connection at a tiny solder joint.
When the device cools down, it will work again for awhile, but the same pattern will likely repeat. Internal repairs on the Express are not really feasible since the labor costs will likely exceed the cost of a new Express.
If you are really handy with small electronic repairs and you have the time, you could carefully saw the case open along the center seam to open up the Express and take a look at connections and solder points. It 's unlikely that you will find something obvious, but might be worth a shot.

Bluetooth Mighty Mouse - right click works for a while and then stops...

I recently bought a wireless Mighty Mouse, installed all the supplied software and paired it with my Macbook Pro. I've set up the right click as Secondary button and have been using it without any problems.
Then recently I've noticed that after using it for a while (in general applications like Aperture, Firefox etc), the right click will perform a Primary (left) click instead. Even if I take my hand completely off the mouse and click on the right side, it will perform a left click function. If I switch the Mighty Mouse off and back on, it starts to work normally again.
Is this a general issue with these mice? Or is mine just faulty? I can't see that it's a hardware fault as it returns to normal when I turn off/on the mouse. Any ideas?
Thanks in advance.

My new MacBook Pro and Wireless MM just arrived Friday and I spent Saturday transferring files from my PB G4 and installing Parallels/WinXP.
My Mighty Mouse worked fine initially, but then the Right Click (Secondary) reverted to Left Click (Primary). I reversed the settings to a "Left-handed" setup, the settings stuck. But the right button would not hold a Secondary setting.
I then paired the PB G4's Wireless Mighty Mouse (that I've had for several months) with the MacBook Pro - same issue surfaced. Both mice work consistently as represented with the PowerBook AND my IOGear bluetooth mouse works perfectly with both the PB and MBP (although the Mouse Preference Pane that comes up for the IOGear mouse is a reduced feature set that does not allow any additional button programning.)
I think it's a Preference Pane code issue. If the others who have posted here have ALSO installed Parallels, then the Parallels tools may be creating conflicts.
MacBook Pro Core 2 Duo 2.33 and just about everyting that came before it Mac OS X (10.4)

Downloaded adobephotoshop touch on ipad 2......worked for a while and then got frozen...can I pay of

downloaded photoshop touch on ipad 2....worked for a while...is now frozen can I pay for help service.....have been working for one hour trying to reach tech support

how can I get tech support in person

Don't receive group chats for a while and then all at once?

Similar Messages

Maybe you are looking for