Don't round values (line graph label)
I need to make a line graph with labeled markers. So, I create a marker design with "%02" (without quotes) as label to show the values. But, if I type, for example, 6,10 into the sheet, the marker's label shows 6,1. But I need show the entire number (with all the decimals, without rounding them up or down). Could you guys help me? Thanks a lot!
Hi,
According to your post, my understanding is that some fields not display in the alert email.
Yes, we can use the workflow to replace the alert email.
You can use the action “Send an Email” to achieve it, set the workflow auto start when items create or change.
Note:The MMS, PG and the Slot are the column name.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support
Similar Messages
-
11.1.1.5 - Measure labels are appearing in legend (line graph)
I've created a line graph in 11.1.1.5. My legend is showing a combination of the column value and the measure name (e.g. Web Sales, Direct Sales, Retail Sales). I want my legend to simply say Web, Direct, and Retail, without the appended 'Sales' measure label.
The Measure Labels tile is currently residing in the Vary Color By (Horizontal Axis) zone, along with the legend column, so I guess it makes sense that the legend column and the measure labels would both show up in the legend (although I don't think that was the case in 11.1.1.3). However, there doesn't appear to be any place into which I can relocate the Measure Labels tile so that the word Sales DOESN'T appear on the line graph. If I move the Measures Labels tile into Graph Prompts, Sections, or Group By (Horizontal Axis), the word Sales appears in those locations. If I attempt to move that tile into the Lines (Vertical Axis) box, or into the Excluded box, it won't allow being dropped there.
Switching between line, bar, and area graphs reveals the same problem in all graph types.
Is there any way to supress the display of measure labels on graphs in 11.1.1.5?Hi Paul,
This is the feature in 11g obiee displaying the Measue heading and dimension value... like u said right Web Sales...and so on.
Here in u case web is the value of dimension and Sales is heading of a measure.
One way is if u are not using any dimension apart from 1 dim and fact u can put measure labels in the group by axis and dimension column in the show in legend section then it will give u only web.
But if u have 2 dimension then we have to put this measure labels with either one of the dimensions in this case heading of the measure wil display.
Thanks
Subhash -
Engage 2008: Line Graph, can't start 2nd series @ different X value
Using Xcelsius Engage 2008
Created line chart w/ 2 series
2nd series does not start at the same X value as series 1.
How do I generate the second series so the initial part of my 2nd series line does not show all 0s?
Thank you
Nancy GriffinHi Tammy.
I'm using Xcelsius version: 5.0.0.99 and Build number 12,0,0,121. I am not sure if S1 is already installed. If not, where can I get it?
This is what I'm trying to do:
1) created a basic line graph with two series
Series 1 Data has 2 columns
Series 1 Column 1 includes dates. THis will be the labels for the X axis:
1/1/07
1/6/07
1/12/07
1/1/08
1/6/08
Column 2 includes the line graph data for series 1
30
50
10
90
120, etc
Series 2 column 1 - THis is the same as series 1 since it includes the same labels for the X axis
Series 2 column 2 includes the data for the 2nd line graph
HERE's WHERE IT IS DIFFERENT
I have no data for dates 1/1, 1/6, 1/12/07. My data starts in
2008. I don't want the graph to show 0s for the first 3 dates and then jump up to the 2008 data. Is there a way to make the 2nd line chart start on 1/1/08?
thank you. Really appreciate your help. -
Creating multiple Line Graph having common values..
Hi...
I've created one application process for creating Multiple Line Graph.
And i've integreted two tables in this graph, where values may be common for both the tables. In this case, for common values, instead of getting overlapped I'm getting scattered graph(its totally abnormal). Please help me if you 've any idea about this issue.....?
Please go through the App Process and the output of the SQL query.
In output of the query, in the NAME column "Feb-2010" is common.
This is the SQL query OUTPUT:_
TABLE 1
NAME VALUE
Sept-2009 100
Oct-2009 95
Nov-2009 98
Feb-2010 97
TABLE 2
NAME VALUE
Jan-2010 93
Feb-2010 100
Mar-2010 98
Application Process :_
DECLARE
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
OWA_UTIL.http_header_close;
HTP.p ('<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>');
HTP.p ('<anychart>');
HTP.p ('<settings>');
HTP.p ('<animation enabled="True"/>');
HTP.p ('</settings>');
HTP.p ('<charts>');
HTP.p ('<chart plot_type="CategorizedVertical">');
HTP.p ('<data_plot_settings default_series_type="Line">');
HTP.p ('<line_series>');
HTP.p ('<marker_settings>');
HTP.p ('<marker type="None" />');
HTP.p ('<states>');
HTP.p ('<hover>');
HTP.p ('<marker type="Diamond" />');
HTP.p ('</hover>');
HTP.p ('</states>');
HTP.p ('</marker_settings>');
HTP.p ('<tooltip_settings enabled="True">');
HTP.p ('<format>Year {%Name}{enabled:false} {%SeriesName} - {%Value}{numDecimals:0}%</format>');
HTP.p ('</tooltip_settings>');
HTP.p ('<effects enabled="True">');
HTP.p ('<drop_shadow enabled="False" />');
HTP.p ('<bevel enabled="true" distance="1" blur_x="2" blur_y="2" />');
HTP.p ('</effects>');
HTP.p ('<line_style>');
HTP.p ('<line thickness="3" /> ');
HTP.p ('</line_style>');
HTP.p ('</line_series>');
HTP.p ('</data_plot_settings>');
HTP.p ('<chart_settings>');
HTP.p ('<title enabled="true">');
HTP.p ('<text>Avg. %App. Uptime per month </text>');
HTP.p ('</title>');
HTP.p ('<axes>');
HTP.p ('<y_axis>');
HTP.p ('<title>');
HTP.p ('<text>Value</text> ');
HTP.p ('</title>');
HTP.p ('<scale minimum="90" maximum="101" major_interval="1" />');
HTP.p ('<labels>');
HTP.p ('<format>${%Value}{numDecimals:0}</format>');
HTP.p ('</labels>');
HTP.p ('<axis_markers>');
HTP.p ('</axis_markers>');
HTP.p ('</y_axis>');
HTP.p ('<x_axis tickmarks_placement="Center">');
HTP.p ('<title enabled="False" /> ');
HTP.p ('</x_axis>');
HTP.p (' </axes>');
HTP.p ('</chart_settings>');
HTP.p ('<data>');
FOR ObjRecord IN (select DISTINCT(K_OBJECT.OBJECT_ID) as OBJECT_ID,name from K_OBJECT, K_OBJ_TYPE_ASP_REL where K_OBJECT.OBJECT_ID=K_OBJ_TYPE_ASP_REL.OBJECT_ID and K_OBJ_TYPE_ASP_REL.OBJECT_TYPE_ID=1)
LOOP
HTP.p ('<series name="'|| ObjRecord.name ||'">');
FOR MonthlyValueRecord IN (select NAME,VALUE
from K_REPORT_RUN,K_ASPECT_VALUES,K_ASP_TIM_RPT_REL
where K_REPORT_RUN.RUN_ID=K_ASP_TIM_RPT_REL.RUN_ID
and
K_ASPECT_VALUES.ASPECT_VALUE_ID=K_ASP_TIM_RPT_REL.ASPECT_VALUE_ID
and
K_ASP_TIM_RPT_REL.ASPECT_ID=1
and
K_ASP_TIM_RPT_REL.OBJECT_ID=ObjRecord.OBJECT_ID
order by K_REPORT_RUN.STARTTIME)
LOOP
HTP.p ('<point name="'|| MonthlyValueRecord.name ||'" y="'|| MonthlyValueRecord.value ||'" />');
END LOOP;
HTP.p ('</series>');
END LOOP;
HTP.p ('</data>');
HTP.p ('</chart>');
HTP.p ('</charts>');
HTP.p ('</anychart>');
htmldb_application.g_unrecoverable_error := true;
END;
Edited by: user12873839 on Apr 9, 2010 3:58 AM
Edited by: user12873839 on Apr 9, 2010 4:02 AM
Edited by: user12873839 on Apr 9, 2010 8:00 AM>
Help Needed Urgent.....
>
That is one surefire way to not get any help and certainly not urgently. I suggest that you amend the title of your post to something that reflects the actual issue. This will also help anyone with similar issues to find the thread.
When posting code please put {noformat}{noformat} (with the curly brackets and the word code in lower case) above and below it to preserve formatting like this...
{noformat}{noformat}
SELECT *
FROM emp
{noformat}{noformat}
This will be displayed on the forum like this...SELECT *
FROM emp
Cheers
Ben -
Plot values in X-Axis in 2D line graph
Hi,
I am using 2D line graph to plot graph but the graph is to be ploted based on date i.e i have a range to be ploted in X-Axis i.e Dates how to plot that please suggest now the values are automatically it is getting ploted
This is query wht i am using
SELECT
pobj.name "Object Name",
tas.name "Task Name",
SUM (TCL.NUM_HOURS_DAY1+TCL.NUM_HOURS_DAY2+TCL.NUM_HOURS_DAY3+TCL.NUM_HOURS_DAY4+TCL.NUM_HOURS_DAY5+TCL.NUM_HOURS_DAY6+TCL.NUM_HOURS_DAY7) ) "Effort"
FROM
timecard_lines tcl,
project_objects pobj,
tasks tas,
projects pro,
timecard_headers thr,
employees epl,
object_task_estimate ote,
TIMECARD_PERIODS TP
WHERE
pro.id = :P61_PROJECTS and
tas.id = :P61_TASKS and
TP.ID = THR.TPD_ID AND
tcl.pobj_id = pobj.id AND
tcl.tas_id = tas.id AND
pro.id = pobj.pro_id AND
thr.id = tcl.thr_id AND
thr.emp_id = epl.id AND
ote.tas_id = tas.id AND
pobj.id = tcl.pobj_id
and
ote.pobj_id = pobj.id and
pro.id in
(SELECT pro.id
FROM projects pro, employee_project_pairs
epp, project_employee_roles per ,employees empl
WHERE empl.id = epp.emp_id
AND pro.id = epp.pro_id
AND epp.project_role_id = per.id )
group by pro.project_name,pobj.name,tas.name
order by pobj.nameStandard syntax on the Mac is Object, Action. The order is always Select an object (in this case, part of a spreadsheet), then perform an action on or with tat object (in this case, make a chart).
The same syntax applies to Copy or Cut (and to Paste, althyough it's not as obvious there—the object is whatever is currently on the Clipboard).
I don't think there is information on printing charts/graphs in the online help. A chart is a graphics object, and is printed as part of the document that contains it. Printing the spreadsheet should also print the chart, provided it is on a page that contains data (AppleWorks's default is to print only the rows and columns that contain data). If you want to print the chart without any of the data, drag the chart over the data to conceal it, and choose the Print options that do not show column or row headers and the cell grid. (These are probably in the AppleWorks options in your Print dialogue, but their position will depend on your print driver.)
Placing the object (the chart) in another document provides an easier method of printing only the chart, and the method you used (dragging the chart from the spreadsheet to the second document is a common and acceptable one. Dragging an object from one document to another places a copy of the object on the second document, and leaves the original on the original document. This is true in general, not just for charts.
In the case of a chart, the copy is a static object, while the original maintains its live connection to the underlying spreadsheet—changing a graphed value in the spreadsheet will change the graph to match the new value, but will not affect the copy in the second document.
Regards,
Barry -
HTML5 fails to show labels on line graphs
Value labels on line graphs fail to show in HTML5 and work fine in the current html version as well as in Excel.
Repro
Create line graph
Right click on the marker of a series and select 'Add Label'
Save to OneDrive
Open it and view the regular html and then view the HMTL 5 versionCould you clarify if this in Power View sheet or in regular excel sheet/line chart?
Also could you clarify what you mean by regular html vs html5?
Thanks
Mey
http://blogs.msdn.com/solutions -
Hi,
I am using JDev 11.1.2.2.0
I made a standard line graph which I populate with data through a backing bean.
I read a post on how to put points to the graph:
ArrayList <Object[]> data;
Object[0] -> x axis data, here I have dates
Object[1] -> name of the serie, a new serie is created for each different name
Object[2] -> y axis data, here I have values
Then I put the list to the graph and it works fine, only for one serie.
When I display 2 or more series, the graph shows the different series in different colors as it is suposed to do.
But, the values (Y axis) are not displayed at the correct place. I mean for instance the point with value 4K is displayed below the 3K Y axis marker...
And sometimes the point is displayed above as its real value...
So my graph is false, but my values are correct (I tested it)
Then what can I do? The graph can draw several lines as I managed to put more than one serie. The only problem is that they are not displayed properly...
(if you need the code I can show it)
Edited by: Jikai on 20 sept. 2012 16:51Ok, I found what was wrong.
In the graph properties the subType field was set to LINE_VERT_STACK, then I changed it to default (LINE_VERT_ABS) and it worked.
<dvt:lineGraph id="lineGraph" subType="*LINE_VERT_ABS*"
binding="#{backingBeanScope.backing_ReportingPopUp.lineGraph}" shortDesc="Graph that shows metrics"
inlineStyle="height:100%; width:100%;" imageFormat="FLASH">
<dvt:background>
<dvt:specialEffects/>
</dvt:background>
<dvt:graphPlotArea/>
<dvt:seriesSet>
<dvt:series/>
</dvt:seriesSet>
<dvt:o1Axis/>
<dvt:y1Axis/>
<dvt:legendArea automaticPlacement="AP_NEVER"/>
<dvt:graphTitle text="Metrics for Hosts by Date" horizontalAlignment="CENTER"/>
</dvt:lineGraph> -
Line Graph Issue - In BIP values are summed for same date
Hi
I have below data
Date-----------------------Sell
27-Mar-13----------------10
28-Mar-13----------------15
28-Mar-13----------------20
30-Mar-13----------------25
There are two entries on 28-Mar-2013. On BIP line graph; Sell values are added and graph show value 35 on 28-Mar-2013.
I want to show two different values on line graph for 28-Mar-2013.
Edited by: 1010402 on Jun 7, 2013 12:49 AMHi 913804
I am amazed you found the browser certification of OBIEE 11.1.1.6 I could not find it anywhere in the documentation nor from metalink personell.
Regarding the graphs not showing, we found this to be an issue with IE and not with Firefox. First make sure you have followed the upgrade step listed in
3.9.11.2 Updating Oracle Business Intelligence Catalogs from http://docs.oracle.com/cd/E23943_01/doc.1111/e16793/patch_set_installer.htm#PATCH250. Then the last resort was to recreate the graph component in each report from scratch. As you say pie charts are unaffected.
Regards,
Nick. -
How do I create a line graph in numbers if my y values are in minute/second format?
When I try clicking line graph, it shows me an empty graph.....no data on it.....just an x and y axis
Convert your Duration values to numerical equivalent using DUR2MINUTES. Chart the values in the converted column, as shown:
Chart 1: Result when cells containig duration values (column C) are selected and charted.
Chart 2: Result for same type of chanrt with same rows of column D are selected.
D2, and filled down: =DUR2MINUTES(C)
Regards,
Barry -
Producing a line graph of int values and saving as an image
Hi,
I wonder if anyone could help me with this. I have 2 arrays of integer values that I would like to plot as a line graph (e.g. X[ ] and Y [ ]) and then have this line graph saved as an image (the format isn't too important but PNG would be preferred).
Could somone point me in the right direction of an easy way to do this?
Thanks,
PeteHave a look at the following classes :
java.awt.Graphics (drawLine method)
java.awt.Image
java.awt.BufferedImage
javax.imageio.ImageIO (jdk 1.4+) -
Hi ,
I Created line graph in ADF X axis - date , Y axis Amount and Currency Mixed Frequency Line graph
For ex : X - axis dates are 01-jan-2011 to 10-jan-2011
y - axis are amount and currency
when i click particular currency line (on 05-jan-2011) how i will get the x axis value 05-jan-2011
Thanks
ShkCheck the range against which line is plotted, you may have to reduce that range to see accurate values.
-
Line Graph x axis tick label date format
Hi to all,
how can i format the date of the x axis label of a line graph?
by now the date label is shown with a timestamp, e.g. 01.12.11 00:00.
How can i change this to a simple date like 01.12.11?
Please help. Thank you.
Best regards
GunnarI would think that the datatype of the date attribute is a TimeStamp ? If yes changing it should help ..
-
I can't seem to find a way to increase the y value for a numbers line graph. When I use the inspector and tab out of the field it goes back to zero!
I hope that this screenshot will help:
Yvan KOENIG (from FRANCE vendredi 6 juin 2008 19:20:52) -
Line graph with single values as dots
Dear Apex experts,
I have the requirement to create a graph in Apex which displays technical values as dots or candles and limit values and average values as lines in one graph.
Is there a way to create two types of graphs in one image ?
Best regards,
DanielHi,
as far as I know, you can't have interruptes series in the DVT line graph
Frank -
Hi,
i have ploted the line graph which is like this select null,week_ending_date,effort from dual;
Here the line is ploted but the labels are repeated
eg:
if the report is like this
Weekending_date effort
12-sep-08 8
12-sep-08 9
14-sep-08 10
15-sep-08 11
In the x-axis 12-sep-08 is repeated mutilple time based on the effort it is returning but we need the label to be repeated only once not multiple times also from the above example 12-sep-08 has 8,9 as the effort it must plot one obove the other if they are repeated with same label please suggest me how to resolve this
Thanks
Sudhir.Hi Sudhir,
try your query like this -
select null "Link", week_ending_date "Week ending", effort "Effort" from table_name;
it should work, i m currently using same sort of query for flash chart.
Hope this will help.
Thanks,
M Tajuddin
http://tajuddin.whitepagesbd.com
Maybe you are looking for
-
LaserJet 10 color MFP M175nw Wouldn't Scan now Won't Install
The scan function wasn't working. I tried to uninstall/reinstall it. Plugging in the USB did not bring up the installer, so I went to the support site to do it. Ran the smart installer, got to the last step and then it gave me a message to the eff
-
Clarification on using function in where clause of oracle sql query
I have an issue in regarding function using where clause of sql query.. We are facing performance issue while executing query, so in what ways to improve the performance of the query which i have posted below. select col ,case when my_function(parame
-
Qosmio G20 Beeping a lot and dimming screen - why?
Occasionally my Qosmio G20 starts beeping a lot and reducing the brightness on the screen. This happens while it is running on AC power and with the power option set to highest level. Simoultanesly there are some blue lights above the keyboard that s
-
is there anyway we can get them back?? all help appreciated. thank you
-
ALV to spool display half report
Hi , I have generated ALV report which is working fine on foreground but when I execute this report in the background it shows half (some columns are missing) in the generated spool. I need to execute this report in background due to large amount of