Don't see my post - how long does it take? question on non-wireless printer and new fios network

have a canon ip5000 - not wireless printer. We just installed our fios network with 2 mac laptops and an imac desktop. We also had been using an airport extreme and airport express (as an extender) with our cox cable modem.
we cannot seem to hook up the canon to the network. We ended up plugging the printer into the airport extreme and the airport extreme into the router. However, the airport extreme now appears as a separate network on the - you can see it in the list of networks at the top of the screen. so you have to toggle between our network for fios -- and then the the network for the airport extreme in order to print.
There's got to be a way to connect up the printer to the fios router?
logging into fios router - you can see the print server is on the list -- however it says inactive -- and never changes status.
sorry if this is a duplicate to my previous post - I'm new here and not sure how long it takes tfor these messages to appear

Actually ... go into the Airport and turn on "bridge mode". Then go into the FiOS router and turn off the wireless. Connect the WAN port on Airport to one of the open ports on the FiOS router. This will allow you to continue to use your Airport as the wireless access point, and continue to have your printer attached like you have had.
It may be necessary to change the IP address of the Airport in this configuration (think bridge mode will suggest one for you -- but essentially and address somewhere on the 192.168.1.x that's not used -- I suggest 192.168.1.254).

Similar Messages

How long does it take to reinstall Mountain Lion on a new hard drive?

Due to performance/corruption issues, I erased my MacBook pro's hard drive. Now, I'm attempting to reinstall Mountain Lion (then do the upgrade to Mavericks). However, after about 5 hours of it doing the reinstall and downloading files (I have it connected to a network cable), I went to bed.
At some point during the night, the process seems to have timed out. Evidently, I will need to start from the beginning of the installation process.
My Questions:
How long should I take?
Is there a way I can prevent the MacBook from going into sleep mode so I can leave it unattended?
Since I've worked in corporate IT, I'm more than familiar with the Windows reinstall process and generally know what's going on and how long portions of an installation should take. Is there a way I can have the installation tell me what's going on?
Any other tips/tricks or general information?
Thank you for any assistance.
Rich

Wish I had your DSL speed. iTunes suggests I have about 7 1/2 hours still to go! Just glad it is giving it it's best shot.
Thanks for your reply.

How long does it take to restore 2TB drive to a New external?

I recently purchased a new 2tb external drive FW800 and wanted copy data from my older 2tb FW400 to this one. I used the restore method in Disk Utility to copy disk partition to the new partition. Its being saying "setup" for hours and hasn't copied. Is this normal? I even tried to hit cancel and nothing ever happens. I'm thinking maybe I should have just did a data copy? How long does this normally take. Am I just being Impatient?
Also will rebooting and starting over do anything to the hard drive if its in the middle or a format or something?

It depends on how much app, music , etc need to be transfered. But 5 hours is a bit too long I think

How long does it take to reformat a hard drive and do a system recovery?

I have a Satellite 2405-S201 that was infected with a virus. I decided to use the Toshiba recovery discs that came with the computer to reformat the hard drive and restore the system to its original factory status. I started with the recovery process using Disc 1 and it now seems stuck. Its been at least 2 hours since I started and the screen is blank. Occasionally the CD drive spins up but nothing else seems to happen. Any ideas on what I should do next? Should I leave it be and see what happens? Or should I attempt to restart the process? Something else?

When my imac was new in 2002 the drive turned out to be defective. Apple replaced it, but it still took about a week, even with the part in stock at the local (US) Apple Store. I would expect it to take longer these days, when it's an outdated machine and so not one requiring parts they'd likely have in stock.

How long does it take to get a line installed and ...

hey peeps just wondering if anyone else has hasd the same problems that i have experienced with bt i ordered bt infinity and bt landline mid feb and it has over a month to get a phone line which ican only dial out on and no internet it took 3 weeks to get open reach out to dig up my front garden and pavement cos they didnt have any ducts (what ducts) when i saw the special DUCTS its looked like drain pipe tubing i could have got them that from the local hardware store. i was told every day of one week that i would have 2 engineers out to do the dig and put the line to my house but no one turned up, niow i am told they are having problems porting my number over from virgin so i can only dial out but if you ring the landline it just keeps ringing but there is no noise coming from the phone, its not a new build house its was built in the 70's. i cant beleive a telecoms company can take so long in getting a new customer put onto their so called brilliant system. if anyone experience similar problems and delays from their order can you tell me if you got anything out of bt after they got connected at all
cheers

Hi jellytot,
it really depends on the work required, the amount of engineers available in your area and if any major issues.
I can be a long time to get set up (judging by some of the posts in this forum).
You and I could purchase the cables, ducting etc from our local DIY/Hardware store but as BT is a large company they use agreed suppliers and as you can imagine, complete a lot of paperwork to get these things through (not that this should be an acceptable excuse). As they are tied into a certain supplier, if the supplier runs out it just adds delays that you and I wouldnt face (if it isnt in your local hardware store, we can just go to the next one).
The number port part can be done quickly, a few days i believe, but again judging by some posts can also take an unreasonably long amount of time (if it goes wrong, it really goes wrong, as 2 servcie providers deal through openreach, which again adds delays that really shouldnt be there).
BT do have a compensations/reimbursement scheme in place, and it depends on start date of teh service. If they have a date that they start charging you they in effect just refund you the charges you've paid for a servcie that wasnt provided (so not really compensations, just a refund). If the order hasnt ever had a start date BT probably havent charged you yet and wont offer any compensation. It is always worth asking though.
I am not in area where they are offering a new fibre servcie so my instal only took 4 weeks (even thought he cable was there and they just had to connect a socket in the house, i was with a cable supplier who kept the old line open until the new one was installed so it didnt really have any afffect on me and i was only refunded the time they charged me for where there was no service).
Goodluck with the installation and hope it gets sorted soon for you.

How long does it take to get the result of hands-on-course test?

Hi:
I passed 1Z0-043 and submitted hands-on-course.
How long does it take to get the result? And how long does it take to get the certificate?
Another question:
Is there any place you can search for OCPs?, just to check those people who have fake certificates.
Saad,

S.Nayef wrote:
Hi:
I passed 1Z0-043 and submitted hands-on-course.Congratulations!
How long does it take to get the result? And how long does it take to get the certificate?Submitting hands-on-course should take 2-3 weeks. After that, you'll wait approximately 1 month to get certificatre
Another question:
Is there any place you can search for OCPs?, just to check those people who have fake certificates.NO there's not
>
Saad,

How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

It should not take very long. Up to thirty seconds tops depending on your Wi-Fi network.
Try rebooting your Wi-Fi router. Turn off the router for 30 seconds then turn it back on. After the router completes its startup routine and indicates a good connection to the internet start you iPad again and see if it will connect.
If you still have problems you might try connecting to a different Wi-Fi network. Maybe one at your local coffee shop or library.

How long does it take for a cancellation fee to process? I just cancelled today and the customer service agent say the cancellation payment went through, but i see no charge on my credit card. On the website it say my cancellation is effective in march 16

How long does it take for a cancellation fee to process? I just cancelled my annual subscription to adobe audition today and the customer service agent say the cancellation payment went through of $74.90, but i see no charge on my credit card. On the website it says my cancellation is effective in march 16, 2015. So when will i be charged?

Hi ,
I'm very sorry to hear of the problems you have had moving to pay as you go.
Please can you give customer service a call and ask to speak to the pay monthly retentions team who will be able to fix this issue for you.
Click here for contact details.
Thanks
James

HT4623 trying to sign in apple id and password done--now says loading --how long does this take???

entered id and password --now says loading--how long does this take????

wilsonfromtx wrote:
entered id and password --now says loading--how long does this take????
With regard to what? I assume that since the link connected to your question was from the "How to update your iDevice" kb article, you are talking about seeing this behavior after you updated the iPad.
So, if that's the case, it really shouldn't take but a minute or so, if it even takes that long. If this has been going on for minutes and minutes, the update process is stuck now. You can try restarting the iPad and see if the iPad behaves normally. That might be all that you need to do to set things right again. If restarting just takes you back to this page loading again, you can try rebooting the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

So how long does it take to load a 160GB iPod using the Convert Higher ...

I have a 160GB Gen 5 that I bought when first released back in the day when they were $400. Through a number of changes, the most recent being the advent of the Convert Higher Bitrate Songs to 128bit AAC feature, I decided to look at what more music I could store. After all was said and done, I ended up with a bit of a disaster with cover art not being properly applied to the music being played. I decided to *restore the ipod* based on suggestions in the discussion boards, and equally important was following the hints and tips here.
http://www.samsoft.org.uk/iTunes/grouping.asp
The advice is especially important in very large library situations to ensure you have uniqueness in the albums you want to display. Hadn't really given it much thought until I had the ability to see the individual albums for the 40K songs on the iPod via the cover art view.
Finally the point of the post...
*So how long does it take to load a 160GB iPod using the Convert Higher Bitrate option now available in iTunes 9.1?* The specs on my computer are not highend by any stretch, but it's no slouch, and neither of the CPUs are ever pegged. At this point I've lost count of how much time it's taken, but the load is going on 3-4 days. With some breaks in between because I need to check each incremental load to verify there is no cover art corruption, correct bad tags and such, but for the most part the loading is visibly slow, and I'm sure the conversion is the cause. I'm not really complaining at this point, but there is clearly room for improvement. And of course unless there is a redo involved in which case I will get quite cranky.
*I would like to hear the experiences of others.*
Finally to lend a bit more credence to the performance concern, my 32GB iPhone 3GS for only about say 28GB of music takes about 24 hrs to load from a 2.2GHz dual core intel laptop, again using the convert higher bitrate option.

With AC power adapter it takes 3-4 hours for a full charge. With the USB charger it takes 9-0 hours for a full charge. I am not happy with them removing the AC charger and other accessoreis at all. It's business but it still stinks.
I know I would rethink my purchase but would most likely end up buying the Micro anyway

Sick of interleaving - how long does DLM take

Have had problems with a dishwasher tripping our electric over the past month and this has of course caused DLM to kick in any put interleave on line and limit my IP profile to always be below 60 mb. My data rate is currently 57957 and hasn't increased for the past month steadily dropping from the 60mb ip cap last month when power cuts happened.
Before my connection was working great and my data rate was a lot closer to the Max data rate, currently it is at 57957, Max at 65760. The Max data rate has been as high as 69000, still no increase in IP data rate.
The main thing though is interleaveing, I know that this is controlled by DLm and cannot be turned of directly, but as my IP profile seems to be stuck and steadily decreasing on every connection restart (which the hh5 seems to do on a whim sometimes)
My line stats seem to be ok SNR 6.0\6.0
Line attenuation 18.2
Please can my IP profile be reset to remove my IP cap which would hopefully put me back on fastpath which I had been on for months and months till the power cuts

same as mine https://community.bt.com/t5/BT-Infinity-Speed-Connection/Poor-Service-from-BT-adamant-about-problem/...
Please can a mod look at my connection just reset the IP profile please, there are no faults on my line!!!!!!!!!
Re: Poor Service from BT, adamant about problem!
Options
on ‎28-07-2014 1h09
I feel this is the exact problem I've been having posted on here titled sick of interleaving - how long till DLM turns it off.
Could you check if your 1st hop is around 12 ms (click start, run, cmd, enter, tracert www.BBC.co.uk) my guess would be interleaving has been put on your line too.
If your router resets too many times (mine due to faulty dishwasher tripping electric)
Once this is on it seems to take ages to reset back to normal. Like you I have the hh5 and this will sometimes do a random disconnect (firmware bug or BT messing with connection?) I always see in my event log a cwmp login from bt which will then reboot the router.
Like you my attenuation is very short (18.2) SNR At 6.2 but it seems because my hh5 sometimes just reboots connection ( usually around 2.20am going from event logs) that interleaving will never come off. I have read that it takes 2 weeks constant connection for speeds to return to normal and interleaving to be turned off.
Not happy about my connection for last month, after being very happy for months and months. As soon as DLM has kicked can feel difference especially in pings more than raw speed for me.
Will run down my contract and jump ship as soon as contract runs out if mine doesn't improve.
Message 19 of 20 (7 Views)
Posted from my mobile
Add Tag...
Quick ReplyReply
smoke999
Visitor
Posts: 4
Registered: ‎26-07-2014
0
Re: Poor Service from BT, adamant about problem!
Options
on ‎28-07-2014 1h17
https://community.bt.com/t5/BT-Infinity-Speed-Connection/sick-of-interleaving-how-long-does-DLM-take...
Is this the BT backdoor to manange connection?
(172830.560000) CWMP: session completed successfully
22:05:05, 27 Jul.
(172830.320000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:05:01, 27 Jul.
(172826.800000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:05:01, 27 Jul.
(172826.790000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
22:05:01, 27 Jul.
(172826.590000) CWMP: Initializing transaction for event code 2 PERIODIC

HT204053 How long does it take for iCloud to upload data for syncing?

I started iCloud over 6 hours ago and yet the progress bar still show 5GB out of 5GB being available. Should I be turning this thing on somwhere or does it automatically upload the info to the cloud so I can access it. If so, how long does that take? Is 6+ hours a normal wait? I really just want to update my bookmarks so I don't need much space but they don't show as being available.
Humph!

Any bookmarks that are synced by iCloud do not use up any of your 5 GB free storage space. What other type of data are you expecting to see there.

How long does it take to create a recovery disc?

Hi!!!
I have just bought a Toshiba Portege T110.
I tried the first time round and cancelled at disc 4 bec i was out of writeable disc.
Today i am on my 2nd try. I have mgt disc 1-3. When at disc 4~~it says is creating Windon Recovery Environment (64bit) and recording. But the progress bar has been hanging there for the abt 1-2hrs and still not done yet~~
I tried to cancel the program, but it says is recording and advise me not to cancel as it will take a long time.
Can some kind soul advise if this is normal? How long does it takes? If not, what could be the problem?
Thank you in advance!!!

Hi all~~
i have the answer to my question alrdy~~
i accidentatly canceled the copying after waiting over 2 hr on disc 4~~
I restarted the process this morning~~~as i have alrdy done disc 1-3~~i am able to start at disc 4 straight away!!!
Disc 4 took less then 10 mins to complete.
So guys~~ the whole process from disc 1 to 4 takes less than 1 hr.
All the best to you guys!!
And Merry Christmas!!

"How long does it take to do a dist-upgrade on your distro?"

Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
The Computer
Dell OptiPlex GX110
[jada@arch-02 ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 797.452
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
bogomips : 1596.45
clflush size : 32
[jada@arch-02 ~]$
I used the following command for the update
$ time pacman -Syu
The Test
first update pacman
[root@arch-02 jada]# pacman -Syu
warning: current locale is invalid; using default "C" locale
:: Synchronizing package databases...
core 23.8K 80.0K/s 00:00:00 [#####################] 100%
extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
community 341.0K 295.8K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
:: pacman has detected a newer version of the "pacman" package.
:: It is recommended that you allow pacman to upgrade itself
:: first, then you can re-run the operation with the newer version.
:: Upgrade pacman first? [Y/n] y
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
Total Package Size: 1.19 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
checking package integrity... done.
cleaning up... done.
(3/3) checking for file conflicts [#####################] 100%
(1/3) upgrading libarchive [#####################] 100%
(2/3) upgrading libdownload [#####################] 100%
(3/3) upgrading pacman [#####################] 100%
>>> The makepkg.conf syntax has changed, please note the new format
>>> when merging the pacnew file with your old configuration.
>>>
>>> The pacman.conf default file has changed. Please update your
>>> config to use the single mirrorlist, and any additional files
>>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
>>>
>>> The location of sync DBs has moved from /var/lib/pacman/ to
>>> /var/lib/pacman/sync/ for several reasons. To delete older
>>> DBs, please run pacman -Sc and follow the instructions.
>>> You will also have to run pacman -Sy to refresh the sync DBs.
>>>
>>> abs is no longer included; please install the 'abs' package
>>> to use abs. You may need to edit abs.conf to re-enable repos.
[root@arch-02 jada]#
restart pacman 3.1.1 and update the packages
[root@arch-02 jada]# time pacman -Syu
:: Synchronizing package databases...
core 23.8K 80.3K/s 00:00:00 [#####################] 100%
extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
community 341.0K 302.5K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
resolving dependencies...
warning: dependency cycle detected:
warning: bash will be installed before its glibc dependency
warning: dependency cycle detected:
warning: readline will be installed before its glibc dependency
warning: dependency cycle detected:
warning: ncurses will be installed before its glibc dependency
warning: dependency cycle detected:
warning: db will be installed before its coreutils dependency
looking for inter-conflicts...
Remove: mktemp mpg321
Total Removed Size: 0.08 MB
Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
nautilus-2.20.0-4 gnome-control-center-2.20.3-1
gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
zenity-2.20.1-1
Total Download Size: 743.90 MB
Total Installed Size: 748.87 MB
Proceed with installation? [Y/n]
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
:: Retrieving packages from community...
freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
checking package integrity...
(349/349) checking for file conflicts [#####################] 100%
( 1/349) upgrading ncurses [#####################] 100%
( 2/349) upgrading readline [#####################] 100%
( 3/349) upgrading bash [#####################] 100%
( 4/349) upgrading kernel-headers [#####################] 100%
( 5/349) upgrading tzdata [#####################] 100%
( 6/349) upgrading glibc [#####################] 100%
(340/349) installing wavpack [#####################] 100%
(341/349) upgrading xine-lib [#####################] 100%
(342/349) upgrading xinetd [#####################] 100%
(343/349) upgrading xkeyboard-config [#####################] 100%
(344/349) upgrading xmms [#####################] 100%
(345/349) upgrading xorg-server [#####################] 100%
:: Could not detect nvidia-utils on system
:: Will attempt to use built-in libwfb
(346/349) upgrading xorg-xinit [#####################] 100%
(347/349) upgrading xscreensaver [#####################] 100%
(348/349) upgrading yelp [#####################] 100%
(349/349) upgrading zenity [#####################] 100%
real 56m46.062s
user 4m25.013s
sys 1m46.520s
[root@arch-02 jada]#
And for your tread question.
How long does it take to do a dist-upgrade on your distro?
one hour
real 56m46.062s
user 4m25.013s
sys 1m46.520s
After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
Archlinux rocks

JaDa wrote:Archlinux rocks
definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
root@moe:~ # apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies.
E: Unmet dependencies. Try using -f.
root@moe:~ # apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following extra packages will be installed:
exim4-base exim4-daemon-light
Suggested packages:
exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
The following packages will be upgraded:
exim4-base exim4-daemon-light
2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
1 not fully installed or removed.
Need to get 0B/1391kB of archives.
After unpacking 8192B of additional disk space will be used.
Do you want to continue [Y/n]?
Preconfiguring packages ...
dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
Package exim4-daemon-light is to be removed.
Package exim4-daemon-heavy is not installed.
Package exim4-daemon-custom is not installed.
dpkg: error processing exim4-daemon-light (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
Errors were encountered while processing:
exim4-daemon-light
[ Rootkit Hunter version 1.3.0 ]
File updated: searched for 152 files, found 131
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@moe:~ # apt-get install exim4-daemon-light
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies.
exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
root@moe:~ #
It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

No i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?

no i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?

it takes hours
it does not damage or wear out hardware
and you can restore any backup afterwards as yo see fit

Don't see my post - how long does it take? question on non-wireless printer and new fios network

Similar Messages

Maybe you are looking for