Don't shade area when using the pen Tool?

When I use the Pen tool the whole area beneath the curve is shaded. Is it possible to only draw a curve and not shade the area?

blop,
At the bottom of the Toolbox, change Fill to None.

Similar Messages

After Effects CS6 11.0.2 crashes when using the pen tool (Mac OS X 10.8.2)

I'm using After Effects CS6 11.0.2 on Mac OS X 10.8.2. Whenever I use the pen tool to add a vertex, the application crashes. I've submitted several crash reports to apple (they get sent to apple automatically when the app relaunches).
My specs:
iMac
21.5-inch, Mid 2010
Processor 3.06 GHz Intel Core i3
Memory 12 GB 1333 MHz DDR3
Graphics ATI Radeon HD 4670 256 MB
Software OS X 10.8.2 (12C60)
Anybody else having this problem or have a solution?

So I have discovered it only crashes when adding a vertex when I'm editing the max a few frames in. When I add vertices on the first frame of the comp I don't have any trouble. I've tried unchecking the box that says preserve constant vertex count, and it still happens.

FW CS4 crashes when using the pen tool for many points

Good morning,
Every time I try to create a mask with the pen tool that
requires a good
amount of points, FW crashes. I've had this happen with CS3
as well, but
with CS4 , it crashes with many less points than CS3 - has
any one
experienced this, and more to the point, any solutions?
Aloha,
Jerry
http://MauiWebDesigns.com

"FatCat" <[email protected]> wrote in message
news:gkga3u$gtc$[email protected]..
> Hi Al,
>
>> I find I use CS3 for all tasks except for the few
that require the new
>> features in CS4. Both DW and Fireworks CS4 are giant
grey hawgs :-)
>
> I knew I should have stuck with CS3!
>
> My Bridge quit working, and I figured that was Nature's
way of telling me
> to upgrade. I spent all of a weekend trying to download
the software
> (akamai means smart - what a misnomer!), then when it
finally downloaded
> the installation was corrupt - did that three times -
took all night to
> download, with a lot of stalls and freezes.
>
> Then on Monday I call customer service and they tell me
that that download
> is too large - why offer it, then?
>
> Anyway, I bought the DVD, got it a few days later,
installed it and Bridge
> still didn't work! Turns out that my anti-virus somehow
kept it from
> working! I don't know why, since it was working
previously. Anyway, now I
> have CS4, but it doesn't work as well as CS3, as you'd
warned me - shoulda
> listened to Uncle Al! ;o) It only cost me $600 plus the
lost weekend and
> the hassles of using a glitchy program - live and learn!
>
> However, I'm an eternal optimist - haven't lost hope
that this will get
> fixed.
I'm optimistic too. I think it will start to sort itself out
when Intel's
new 24-Core 128-bit processors hit the market in conjunction
with Windows 8
and OS X Cervelat.
Al

Why do arrow heads change ends when using the pen tool?

1. I create a horizontal line
2. I change it to a right ended arrow head selected from my own graphic styles
3. I then want to extend the left side ( non arrow end) with the pen tool
4. I click the non arrow end to extend the line in a vertical direction
5. The atrrow head changes to the other end
Why?

Illustrator's arrowheads don't know right from left, they only know start from finish. Each open path in Illustrator has a beginning and an end. When you use the pen to extend a path you make the end you work from the end, even if it was once the beginning. Deselect the path, then click on the other end with the pen tool to restore the path direction.
If all you are doing is making the path longer I'd would be better to just move the end point.

Help with using the pen tool

I have a few different problems with the pen tool.
1. When using the pen tool I keep finding that the shape I'm doing is slightly overlapping where I've already gone with the pen tool.
If I try and go over that area again the path I've just drawn then jumps and ruins the shape I was creating.
How can I stop this from happening?
2. Also is there a limit to the amount of paths you can create and add text to? I created two paths and typed on them fine but when I added a third path it refused to type. The cursor didn't change to show I could type and if I did click on the path line and try to type jumped to my other path and typed there. All paths were on different layers and none were overlapping, but it is 3 circles inside each other that get smaller if this makes a difference.
How can I type on the third path?
3. When I have done a path and clicked stroke it is only a thin line. How can I make this line thicker?
Thanks.

Ok, the first example would be something like this. Pretending the lines go elsewhere, say I've drawn a path with the pen tool, gone round the bottom box and that then goes round the two lines going down. So if I go down the one on the left side it hits the previous path I did, but to go up the line on the right side I'd need to go across there. But if I make a point where the two lines meet to do this it then throws the line off elsewhere.
I did have snap vector tools on but it does that without it on.
The next one I was creating a car speedometer so it has lines on the outside, dots inside of that and then, where I've done the blue circle, would be the third path where I then write the numbers in. But I can never write on that third path.
And finally, the pen tool and I think it dd have Shape Dynamics set. I've changed a couple of things and it looks a bit better now so I think that should be ok. Thanks
I know I haven't shown the panels but I haven't got any for the first as it won't go right so I deleted what I was doing. And each thing I've done is on a different layer for the speedometer, all just paths created with the circle tool with the text on.

How do I turn off the alt scroll zoom? When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

My layers look messy when i use the pen tool they dont align with the layers below?

im new to illustrator, not sure if I worded it right, but I watched a tutorial, where the teacher was using the pen tool, he was drawing a bear, say if he drew another layer of shade on the bear he could quickly use the pen tool and even if he went out of the borders of the bear the pen tool would recognize this and stay with the bear layer. When I use the pen tool I have different layers but If I go out of the line of the object underneath it goes out it doesn't recognize that I want it to end there, so all my layers are mismatched and not clean
halp!

In the tutorial they were maybe drawing in "draw inside" mode.
See manual on this mode

Drawing a curved line using the pen tool, dragging the text cursor over the line but will only give me a small area to write in, in-between a circle and a circle with a cross in?

Drawing a curved line using the pen tool, dragging the text cursor over the line but will only give me a small area to write in, in-between a circle and a circle with a cross in?

If you change your tool to the "Direct Selection Tool" (A) then you should be able to adjust the area for you to type in...

I am using the pen tool to clipp an image. Sometimes when I apply the mask WITH NO FEATHER it still appears to be feathered? Does this have to do with Anti-aliasing

I am using the pen tool to clipp an image. Sometimes when I apply the mask WITH NO FEATHER it still appears to be feathered? Does this have to do with Anti-aliasing?

I am using CS6 and when I use the pen tool, it deletes the inside image not the outside image

I have been using photoshop cs5 and cs6 for a while but I have never encountered this problem. Whenever I use the pen tool to trace an object and I close the traced object, it deletes the object i traced and not the background. It is really anoying and I cant change it. I have spentt a fair amount of time trying to change it but i dont know how. Can someone please help I have also looked online but there is nothin to help.
Thankyou Alex

Hi,
It's probably the path operations setting.
The default setting in photoshop cs6 is Exclude Overlapping Shapes and you could also use Combine Shapes.

Using the Pen Tool in Flash

I'm in the process of teaching myself the components of the CS4 Design Premium package using the Adobe Classroom in a Book series. I'm currently going through the Flash CIAB and i've started using the pen tool. The task involves creating a wave like design across the stage. Whilst this in itself is simple, the final instruction is to click on the first anchor point to close the shape. In the illustration, the closed shape seems to automatically extend around the stage, however when I click on the first anchor point, the line automatically connects between the two points in a straight line.
Am I doing something wrong? The next step is to fill this area, but with the straight line effect that I am getting, this becomes impossible. I should point out that the instruction states that the pen tool line should extend off the stage. I have done this, but even then on clicking on the first anchor point the shape is closed incorrectly.
If you have any suggestions as to why this may be, I would be greatly appreciative.
Chris

Thanks Ned,
I think I worked out the problem; I think that part of the instruction was missing. When I looked at the picture again, I noticed that there were anchor points around the stage, so I guess that was what I missed. I was simply creating the wavy line across the stage, and then clicking on the first anchor point to close the shape. I resolved the problem by creating three anchor points around the stage and then closing the image by clicking on the first anchor.
Thanks again for your help Ned.
Chris

Photoshop CS6 shuts downs when using the move tool

Photoshop CS6 shuts downs when using the move tool. It seemas to run fine until i try and use the move tool. PS worked fine just a few weeks ago and now it has this issue. What can i do to resole this issue?
Thnaks,
System Specs
Windows XP Home SP3
AMD Atholon 64 X2 Dual
2GB RAM
Video Cards
Radeon 7200
NVIDIA GeForce 8400GS

Two displays are OK on one adapter, Two displays adapters are not OK. http://helpx.adobe.com/photoshop/kb/gpu-opengl-support-photoshop-cs4.html
7. If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems when OpenGL and Photoshop use the GPU. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Also make sure that they both support the same versions of OpenGL and Shader Model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.

Is there a hotkey to break the handles of points while you're using the pen tool?

When you use the pen tool, it smooths the points as you add them, but sometimes I don't want that, So far, the only way I've been able to combat this is by using the pen tool, pressing V to switch to the selection tool, clicking elsewhere to deselect the path, then pressing P to use the pen tool again, and then selecting the end point again.
This process is becoming very annoying over the course of long projects, and I'm hoping that someone will be able to solve it for my.
(I specifically want the hotkey for Mac, but it would be good if you could give the PC hotkey too for other people looking at this.)

Use the Alt-key to switch to the anchor-point-conversion tool temporarily. Use the command key to switch to the last used selection tool temporarily

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Can you merge two user accounts on macbook? my wife has created a user on her new macbook , then inadvertently created a second one when using the migration tool. 1st ac has her office 365 install, yet 2nd has her itunes database, docs and contacts.

Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?

There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User.

Don't shade area when using the pen Tool?

Similar Messages

Maybe you are looking for