Don't sleep after upgrade 10.9.4 MacBook Air

when i close the display in the Macbook Air with the new 10.9.4 upgrade, never go to sleep, every single morning when i comeback to work and open the display the battery is complete drained.

Hi,
Try:
Intel-based Macs: Resetting the System Management Controller (SMC)
and : About NVRAM and PRAM
to ensure the proper operation of the SMC.
and if still issues persist,  try: OS X: What is Safe Boot, Safe Mode?
Cheers

Similar Messages

  • After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared.  I'm not sure how to get it recognized again.

    After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared.  I'm not sure how to get it recognized again.  Help -Sami

    Well, if you did then you may be able to track it, if you did not it's not possible.

  • After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

    After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

    Have you tried changing the order in Network Preferences pane?
    Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
    Hope this helps
    PJRS

  • After upgrade to yosemite my macbook air doesn't connect to iPhone 4s(version8.1).

    after upgrade to yosemite my macbook air doesn't connect to iPhone 4s(version8.1) .it did connect once and thats it...theywork now as two different mac products as before upgrade. that advantage of connecting the mac products after upgrading to yosemite has not worked.

    Hi netaanya,
    Welcome to the Apple Support Communities!
    Your iPhone 4s does work with Continuity, but only phone calls. Please refer to the attached article for more information.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Handoff is supported by the following iOS devices and requires iOS 8. Instant Hotspot requires one of these iPhone or iPad devices with cellular connectivity and iOS 8.1. Instant Hotspot also requires Personal Hotspot service through your carrier.
    Phone 5 or later
    iPhone 4s (sharing iPhone calls only)
    iPad (4th generation), iPad Air, iPad Air 2
    iPad mini, iPad mini with Retina display, iPad mini 3
    iPod touch (5th generation)
    Cheers,
    Joe

  • Bookmarks don't work after upgrading to Firefox 5.0

    My bookmarks don't work after upgrading to Firefox 5.o. Please help! The icons no longer show and instead there is a blank paper with the top right corner folded. I can't even bookmark new pages! I tried reinstalling the program and that didn't work. Please help!

    Your bookmarks file may be corrupt. Navigate to /[UserName]/AppData/Local/Mozilla/Firefox/Profiles/[profile_name]. Either rename places.sqlite to places.sqlite.corrupt (or whatever) in case this isn't the problem, or delete places.sqlite. Start/Restart Firefox. The icons for sites that have a favicon should return after you visit each site.

  • My iMac 27 medio 2011 will not sleep after upgrade

    My iMac 27 medio 2011 will not sleep after upgrading to Yosemite. No problems before upgrading.
    And yes, I have disabled wakeup via bluetooth.
    Anyone else having this issue after upgrading?

    No one else having this issue?

  • Genius gamepad don't work after upgrade to Yosemite.

    My game Genius Maxfire 3 gamepad don't work after upgrade to Yosemite, please help.
    Juan.

    Try deleting the previews directory and then rebuilding the standard previews.

  • Bookmarks and reading lists don't work after upgrading to ios6 on ipad

    Bookmarks and reading lists don't work after upgrading to ios6 on ipad

    Your bookmarks file may be corrupt. Navigate to /[UserName]/AppData/Local/Mozilla/Firefox/Profiles/[profile_name]. Either rename places.sqlite to places.sqlite.corrupt (or whatever) in case this isn't the problem, or delete places.sqlite. Start/Restart Firefox. The icons for sites that have a favicon should return after you visit each site.

  • After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

    After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

    May start my own thread, but I'm having similar issues.
    I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
    My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
    When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
    Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
    • restart Apple TV
    • restart Macbook Pro
    • quite iTunes/open
    • turn off Home Sharing on iTunes then reconnect it
    • unplugging and cycling both my modem and router
    None of these have alleviated the problem.
    The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
    Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

  • After upgrading to yosemite my macbook pro late 2011 does a random sound from time to time.

    After upgrading to yosemite my macbook pro late 2011 does a random sound from time to time. Its completely random and i already checked all apps in use and its not from them.

    Sounds like Notifications app.
    Maybe some other app. In SystemPreferences->Users&Groups->LoginItems tab: remove all entries with the minus sign underneath. This will not uninstall anything, you have to start those apps by hand now. Restart.
    Still there?
    Yes: Restart again while holding the shift key, this will start the mac in SafeMode: only the necessary items are loaded to run.
    Still there?
    Yes: Make an etrecheck list and post it here.
    No: Restart, put the items in the LoginItems back, one by one, restart after each entry, and you will find the "culprit"
    Please report accordingly. I will be back in 24 hours.

  • After upgrading to Yosemite, my MacBook Pro now requires me to enter a password whenever I start up my computer. I want to eliminate this step. How?

    After upgrading to Yosemite, my MacBook Pro now requires me to enter a password whenever I start up my computer. I want to eliminate this step and to go back to the ability to reboot and begin using without a login.  How do I accomplish this?

    Hightlight Login Option.  This will bring up the window showing Automatic login.
    Please post a pic of your window if Automatic login is missing.  Make sure your personal info is not showing.

  • After upgrading iPhoto on my MacBook Pro running OSX Yosemite 10.10.3 it continually keeps asking me that it is preparing library. This has happened 5 times now and I can't access my photo's through iPhoto, any suggestions?

    After upgrading iPhoto on my MacBook Pro running OSX Yosemite 10.10.3 it continually keeps asking me that it is preparing library. This has happened 5 times now and I can't access my photo's through iPhoto, any suggestions?

    There is no upgrade to iPhoto with OS X 10.10.3 - here was an update to version 9.6.1 a few months ago and Photo 1.0 was added with 10.10.3 - what software and which version are you having trouble with - iPhoto or Photos?
    LN

  • After upgraded to Mavericks my macBook Pro my Apple TV sound crash each ten seconds. Please help me!

    After upgraded to Mavericks my macBook Pro my Apple TV sound crash each ten seconds. Please help me!

    Hi Aparana.rahul,
    The beeps during the startup of your MacBook Pro indicate that it may need to be serviced. See this article for further information -
    OS X Mavericks: If you hear beeps when your computer starts up
    http://support.apple.com/kb/PH14206
    Note that while the article title says it is for computers running Mac OS X 10.9 Mavericks, the same information applies to other versions.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How do I put an external display to sleep when I am using my MacBook Air for presentation?

    How do I put an external display to sleep when I am using my MacBook Air for presentation? I do not want to go to the projector just to turn it off and turn on again after a while? Is there a keyboard shortcut for that?

    I want to be able to sleep the external display and at the same time do things in the MacBook.( This feature is useful for me so that I can prepare some things and so that my audience will not see what I am about to show them.)
    Is there a feature for Mountain Lion?

  • I need to upgrade my first generation Macbook Air to Lion OS x10. I need to install software that requires 10.7 also a java update that requires 10.7. I am currently on Snow Leopard 10.6.8 and my macbook Air 1.1 will not go up to Mountain Lion. The lion s

    I need to upgrade my first generation Macbook Air 1,1 to Lion OS x10. I need to install other  software that requires 10.7 also a java update that requires 10.7. I am currently on Snow Leopard 10.6.8 and my macbook Air 1.1 will not go up to Mountain Lion. The Lion software update 10.7 is no longer available from the store or downloads.
    Where do I get this?
    It was only released a couple of months ago.
    I really feel disinfranchised already by not being able to upgrade and keep up with other software needs but to not allow me to update to my full capacity is really ridiculous.

    @Jennacide wrote:
    It was only released a couple of months ago.
    OS Lion was released 16 months ago...  in July 2011.
    Lion Tech Specs  >  http://support.apple.com/kb/SP629
    To upgrade to Lion...
    Contact Apple in your Country to Purchase a Snow Leopard Disc...
    http://support.apple.com/kb/HE57
    In the US...
    1-800-MY-APPLE or 1-800-676-2775
    After the Successful Install, run Software Update to get the latest updates...
    Be sure to make a Backup of your Current System Before Upgrading...
    Also... Check here for compatibility of 3rd party Software you may be using...
    http://roaringapps.com/apps:table

Maybe you are looking for

  • Is SAPGUI compatible with windows vista

    Dear All Have any one faced problem running SAPGUI with windows Vista ? Recently I have faced such problem while running transaction "SQVI" from windows vista typically using "table join" as data source. It simply hanging. The same transaction is run

  • Roles in CUP

    Hi, We imported all the roles from SAP into CUP. CUP however requires certain mandatory fields e.g. Role Approver, Business Process, Functional Area, etc which we would like to use. Does this have to be maintained in CUP? I know you can export the ro

  • How do i add songs??

    i'm new to itunes & i just received my ipod. i have a lot of songs i've downloaded with Ares in mp3 format, but how do i add them onto my ipod?? and is therer a way i can transfer songs from my cds onto my ipod?? any help would be appreciated! thanks

  • Nomad Zen Xtra Firmware / USB Connection Iss

    <SPAN class=postbody>I have Zen Xtra 60Gb I was transferring music and then it said it couldn't transfer the track or the following track and so on. The menu on the Zen Xtra froze. I waited for a while but I got impatient I just pulled the battery ou

  • Standard table data lost during adjustment

    Dear experts, Greetings., I was trying to make changes in a domain of an append structure of a standard table and while adjusting the table..i lost the data from the table (which was standard table). Any suggestion how to retrive it back? Please help