Don't understand how flash video works

I hate to bother you guys here but I'm trying to convert a
quicktime video to flash. When into flash professional, brought the
video in just as the directions say, exported the video as a file,
not as and html page or what ever.
I get a flash file thats like 35K on my desk top and click it
and it plays. This is a much much bigger video file. Does the flash
file just link to the actual video file? Seems that that must be
what needs to be done. I know that when I click on the file if I've
mover the qt file to another folder - nothing happens.
What is the best way to create the smallest size quicktime
file that would work with this situation. The place holder is
280x190 . I'm tired, but keep trying though. Any help or place for
additional reading?

You don't say which version of Flash you have, but here's a
Good Practice page from Adobe for Flash 8, which gives guidelines
on compressing video.
http://www.adobe.com/devnet/flash/articles/flash8_bestpractices_06.html
In QT Pro, the Help articles will guide you through the
various compression choices, for both Video and Audio. They open
under Options when you choose a format for Export, probably AVI or
other format Flash will be able to import. You may have to
experiment with bit rate choices, to see how quality changes.
I don't do video, but the other day I had a 4.5 MB MP3 sound
track I couldn't safely compress further. I added it to my Flash
movie, exported, and was startled to find it all played at high
quality, totalling 400 kbs, less than half a MB. But I first set
the option to streaming. So Flash itself will do some
compressing.

Similar Messages

I have, by mistake, caused all my photos in a large book I am making to revert to the original. This after a long time spent editing etc. I don't understand how iPhoto library works. I have aTime Machine. I also have an EHD backed up 2 days ago.

Yosemite 10.10.3
i am making a photo book with iPhoto, had already started it when Photos superseded iPhoto so I carried on. Have spent a lot of time on it, it's a large book.
BY mistake I caused all the photos to revert to original.
I have Time Machine and I backed up Photolibrary to EHD 2 days ago.
BUt it I don't understand iPhotos library. If I replace existing library from Time Machine, all my projects, albums etc. be there as they were before my BIG mistake?
I have read that Time Machine is not suitable for back ups of iPhoto so should I try to use my EHD? In finder it just shows 'iPhotoLibrary'. So the same question arises - does the Library incorporate all my projects and the work I've done on them up to the date of back up?
I would be so grateful for help and advice

See my response to your duplicate post.

I don't understand how this Forum works

I have a question getting the proper version of Flash Player for my computer. So I went to the Flash Player forum and typed my question into the question box.
But all I received was a notice saying that no similar questions were found (or something to that effect). In other words, it did not let me ask my question to the Adobe FP community--it just did a run of the keywords in previous posts.
I need to ask my question to the Adobe community and have just spent half hour going around in circles. Can someone please tell me what I'm doing wrong? Thanks.

Because they want very few people to use their forums so that answering the questions becomes as easy as possible.
That has not been the impression left on me. Recently, Adobe initiated a special department, to better manage the forums, as Adobe realizes the service that they provide. Much has been done to simplify, and coordinate the tasks of using the forums, with some fairly major re-designs.
Have all those efforts been perfect? I rather doubt it, but the process is on-going, with many discussions on how to make the forum "experience," both easier and more satisfying to users - both those who post with problems and questions, and for those who answer the questions. Not every change has improved things for everyone, and I have had a few complaints on some. Still, the effort (and expense) is being put forth. Many are working very hard, and there have been improvements, with more to come. The forums will never be perfect for all users. That is just the way that it is. However, with a focus on "the greater good" of the "majority," then that might be, as good as it gets.
Hunt

I don't understand how udev rule work

I had a problem with xsane only running as root a while ago and so copied a udev rule into /etc/udev/rules.d
The scanner was then detected and added to the scanner group and I could use it. I've very recently had to do the same with a different scanner. But in both cases the same rule already existed in /lib/udev/rules.d/53-sane.rules
Why was this not used in the first place? Is there something wrong with my udev that it would not look in /lib/udev/rules.d and find the correct rule... or are people supposed to copy them over from /lib/udev/rules.d to /etc/udev/rules.d ?!?

http://reactivated.net/writing_udev_rules.html
Read that front to back and you'll know how it works .

I don't understand how ADF Security works

In short I used ADF Security wizard to make a secured fusion webapp (Form authentification, XML id store, no grants). It made me the error,login and welcome page and I added one more (a page with a table). I granted that page view access to one role defined in jazn.xml. I noticed that at deploy the content of 'jazn.com' is merged into 'myrealm'. Everything goes well when I try a user defined in jazn.xml, but when I add a new user directly from the WLS console (same group as the others defined in jazn.com) I can login but I cannot access the page with the table because I'm not authorized. I think it's a role mapping issue but I'm quite not sure... I tried to look after the valid-users=users mapping but I haven't managed to find the users role into wls.
How is the application getting the users and roles (groups) from the wls realm? Why I can log in but not authorize ?
Thanks
Kquizak

Hi,
at devlopment / testing time the way the user provisioning works is that existing users and groups of the same name are initially removed and then re-created. So in your case you have a user created in WLS that is added to a group that is re-newed by the develop-test cycle. This means that when running the application, you no longer have the user to be a member of the group. In a next version of JDeveloper 11 we probably make the user/group provisioning an option, in which case your settings will be preserved. Note that this problem doesn't exist if you deploy the app to a stand alone server, like in production
Frank

Help..Flash Videos work for Chrome/IE but NOT Firefox

So I cannot see some flash videos on Firefox (like sites CNet & Disney do not work) which use flash. It does work on Chrome & IE.
1. ALL Programs are the newest/latest versions.
2. I removed and downloaded all programs- restarted the computer after each download.
3. I have the latest Flash (according to the website) when I view the Adobe Flash Website on Firefox.
I don't know why some flash videos work...and some do not.
I am running Vista. All my programs are legit...and I do have McAfee running..I don't download porn, no viruses etc.. Anyone have advice?!!

ok ok
I disabled firewall which - for some weird reason- allow it to play in Firefox. Videos played in IE & Chrome- but not in Firefox, until I disabled Firewall..weird.

Trying to understand how MIDI Clock works in Logic

Hi,
I'm syncing a Roland MC-909 Groove Box with Logic. I'm also using a MOTU MIDI Express interface. The MC-909 syncs to Logic, thus it is in Slave mode. Under Preferences->Sync->MIDI Sync Project Settings, I've discovered something odd, and I'm trying to understand it. It could be just a lack of understanding regarding the MIDI Spec.
Under MIDI Clock, I necessarily need to set the destination to the MC-909. I cannot use 'All' or else the MIDI Express starts playing back at 8x the tempo set in Logic. Not sure why this happens but its probably something weird with the MOTO interface. Anyway in Logic, MIDI Time Code (MTC) is disabled, Song Position Pointer (SPP) is disabled, and MMC is disabled.
So basically I'm only sending MIDI Clock to the MC-909. Here's what is wierd: As I locate to different places in the Arrange window (not in play mode), the MC-909 is locating to the correct time offset within the pattern! This basically guarantees that you can start the Logic song anywhere, and the MC-909 will start playing back the pattern at the right time. I don't understand how this can be happening given that I've disabled SPP in Logic. The only sync communication between Logic and the MC-909 is MIDI Clock, but I don't believe that MIDI Clock is even capable of transmitting offset information that specifies the time-offset into a drum machine pattern, Does it? Or is Logic sending SPP info as I click on different locations in the Arrange window?
Another point, is that if I select to transmit MIDI Clock to another device other than the MC-909, but still using the MOTU MIDI Express, then the MC-909 plays back synchronously (i.e. its getting MIDI Clock from Logic, even though Logic isn't sending MIDI Clock to the MIDI port connected to the MC-909), but it does not track the pattern offset described in the previous paragraph. The only way I can get the pattern offset to work, is if I select the MIDI Clock to be sent to the MIDI port connected to the MC-909.
I would like to figure this out because I'm thiinking about buying an external MIDI synchronizer, but I don't want to lose the ability to have logic specify the offset into the pattern on the MC-909
Thanks,

Hi,
I'm syncing a Roland MC-909 Groove Box with Logic. I'm also using a MOTU MIDI Express interface. The MC-909 syncs to Logic, thus it is in Slave mode. Under Preferences->Sync->MIDI Sync Project Settings, I've discovered something odd, and I'm trying to understand it. It could be just a lack of understanding regarding the MIDI Spec.
Under MIDI Clock, I necessarily need to set the destination to the MC-909. I cannot use 'All' or else the MIDI Express starts playing back at 8x the tempo set in Logic. Not sure why this happens but its probably something weird with the MOTO interface. Anyway in Logic, MIDI Time Code (MTC) is disabled, Song Position Pointer (SPP) is disabled, and MMC is disabled.
So basically I'm only sending MIDI Clock to the MC-909. Here's what is wierd: As I locate to different places in the Arrange window (not in play mode), the MC-909 is locating to the correct time offset within the pattern! This basically guarantees that you can start the Logic song anywhere, and the MC-909 will start playing back the pattern at the right time. I don't understand how this can be happening given that I've disabled SPP in Logic. The only sync communication between Logic and the MC-909 is MIDI Clock, but I don't believe that MIDI Clock is even capable of transmitting offset information that specifies the time-offset into a drum machine pattern, Does it? Or is Logic sending SPP info as I click on different locations in the Arrange window?
Another point, is that if I select to transmit MIDI Clock to another device other than the MC-909, but still using the MOTU MIDI Express, then the MC-909 plays back synchronously (i.e. its getting MIDI Clock from Logic, even though Logic isn't sending MIDI Clock to the MIDI port connected to the MC-909), but it does not track the pattern offset described in the previous paragraph. The only way I can get the pattern offset to work, is if I select the MIDI Clock to be sent to the MIDI port connected to the MC-909.
I would like to figure this out because I'm thiinking about buying an external MIDI synchronizer, but I don't want to lose the ability to have logic specify the offset into the pattern on the MC-909
Thanks,

I really can't understand how this recursive works??

Hi all,
I have got a recursive function that checks for palendrome string. But it is confusing. I know that a string is palenromme if it is empty or has a char or first char and last one are same and middle is palindromme too.
but can't understand how this function works.
class Palindromme
     boolean palindrom(String s)
          if (s.length() <= 1 || s.equals(null) || s=="") //this is the stopping point
               return true;
          else
          {                    //recursive definition
               return ( s.charAt(0) == s.charAt(s.length()-1) ) && palindrom(s.substring(1,s.length()-1));
specially i don't know how palindrom(s.substring(1,s.length()-1)); is working cause it has to be increased for each loop.
abdul
PS: actually i don't know how recursion works from Data structure point of view

Hi,
ok your palindrome is : "otto"
return ( s.charAt(0) == s.charAt(s.length()-1) ) && palindrom(s.substring(1,s.length()-1));
              o                     o                                   tt
so first part is true
in the second part palindrom is called again but with the remaining tt
so second time :
return ( s.charAt(0) == s.charAt(s.length()-1) ) && palindrom(s.substring(1,s.length()-1));
               t                     t                                 ""
Third time:
if (s.length() <= 1 || s.equals(null) || s=="") //this is the stopping point
return true;after all for otto the recusion is:
return ( s.charAt(0) == s.charAt(s.length()-1) ) && s.charAt(1) == s.charAt(s.length()-2) ) && nothing left of otto);
Phil

Don't Understand How to Play a Playlist in ITunes

I don't understand how to get Itunes to play my playlists on my home computer. I select the playlist, press the play button and either nothing happens or it may play the first selection in the playlist then stop. When I try to skip a song, it just stops as well. Is there some setting I need to have to simply play a playlist on my home computer. The playlists work fine on my Ipod. I don't get it. Please help.

Glad we found it.
Ya, the checkboxes are there to basically let iTunes know, yes, you can play me automatically. If they are unchecked, they don't get played (unless you specifically pick to play them) and if there are NO checked songs in a playlist, after it finishes the current song, finds nothing checked, so doesn't play anything else.
Patrick

When we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

when we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

Click here and ask the iTunes Store staff for assistance.
(108048)

I would like to understand how merging cells works

I am trying to reduce nine fields, into three, but can't understand how merging cells works. Because sometimes it will allow me to merge cells, and at other times the word merge is greyed out
Regards Lee

The User Guide, which you can download using the link in the Help menu, explains merging cells pretty clearly.
I suspect the relevant line to your problem is:
"The group of cells you choose must form a rectangle, and they must be all body cells, all header cells, or all footer cells."
The merge option is probably greyed out because your selection includes both header and body cells.
I think there is a general feeling among users that merging cells should be avoided because it breaks some operations like sorting tables.

I don't understand how to upgrade to iOS 5 or 6 on my iPad?

I don't understand how to upgrade to iOS 5 or 6 on my iPad?

Connect to iTunes. Click on your device. Click Update.

I don't understand how to download an attachment on an email. It appears to countdown as I; downloading, but I can't find it. Anyone help, please

I don't understand how to download an attachment on an email, on my iPad. It counts down as if downloaded, but I can't find it? What am I doing wrong?

What kind of attachment you are trying to download? After downloading, it should appear with the icon of the program that mostly likely will open it.
Some formats are not supported...

HT204406 Don't understand how to buy new music?

I had Itunes a long time and I would like to buy more music. I don't understand how to get into purchasing the music.

Same as always.
What issue are you having?
Find the song you like. Click Buy

I don't understand how to 'warp paths'. Please help.

Hey,
Can someone help with me 'warping paths'. I don't understand how to do step 2 of this tutorial
[url]http://www.pegaweb.com/tutorials/moonbase/moonbase-website-layout-1.htm[/url]
It asks you to pick a foreground color, use the pen tool and make a traingle with the points, completing your last point by clicking on the first and completing the loop.
Then it wants you to go to Ctrl+Click on the path, add a few new points, and drag them around to warp the path but I cannot warp it like in the tutorial. I just get some random shapes and inversion of foreground color and white.
How do I do step 2?
Thanks.

Those are basic path adjustments. With the pen tool selected, you Ctrl+click on the path to make sure it's selected and then click on the path a couple of times with the Pen tool to add some anchor points which you then modify
Path segments, components, and points
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7390a.html
Convert between smooth points and corner points
http://help.adobe.com/en_US/Photoshop/11.0/WS7EE0B5C9-A95D-465d-BFEC-2149F76CEFB9a.html
Adjust path segments
http://help.adobe.com/en_US/Photoshop/11.0/WS068CF4C8-5B1A-463a-99F5-151F2EFEB38D.html

Don't understand how flash video works

Similar Messages

Maybe you are looking for